
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Model: IPB203 1x Doorbell camera 1x Indoor chime 1x USB charging cable 1x Installation set 1x Reset pin Package contents Description 1x Quick Start Guide Doorbell Chime 1.) Microphone 2.) Lens 3.) Light sensor 4.) Indicator red- charging blue - working 1 2 3 4 5 6 78 9 5.) Doorbell button 6.) Reset button 7.) Speaker 8.) Screw hole (for install the doorbell and wall bracket) 9.) Type-C charging port 1 2 3 4 5 6 1.) Indicator 2.) Speaker 3.) Pairing button 4.) Voice +/- 5.) Tune 6.) USB 2.0 power connector * Hold and press the reset button for 3 seconds to reset the connection and delete the device from the app. Before using the doorbell 1.) Charge the doorbell device via a 5V(1A~2A) adaper (adapter not included) and suplied charging cable. While the doorbell is in charging, the charging indicator(red) will be turnned on. The charging indicator will be turnned o automatically while the battery is fully charged. 2.) Before mounting the doorbell, use your smartphone to test if the Wi-Fi signal be covered and strong signal. Place the camera in a location with a clear, unblock field of view. 1.) Plug-in the USB chime in to a 5V(1A ~2A) adapter or a USB 2.0 socket to power on the chime. 2.) Hold and press the A-pair button of the chime , the indicator of the chime will be flashed which means the chime is ready to pair. 3.) Press the B-ring button of the doorbell camera, the chime will receive the signal and ring, means the chime is connected to the doorbell camera. 4.) Press the voice +/- button to switch the volume of the chime. 5.) Press the tune button to choose your desired tune Pair the chime and doorbell B- Ring button A- Pair button The indicator will be flashed when the chime is ready to pair Installation – Connect the doorbell with the app 1.) Power the camera After full charge the battery, hold and press the bell button for 3 seconds to turn on the doorbell. 2.) App setup and installation Use your mobile phone or tablet to search for “TuyaSmart” or “Smartlife” in Google Play (for Android OS) or in the Apple app store (for iOS) to find the app, and install it according the instructions. Register an account If this is the first time using the app, you need to register an account as per below: TuyaSmart or Smart Life The device only works when someone rings the bell. User will get the notification and phone call from the app. The message center helps user to check the history of the visitors. DB203 DB203 DB203 Q: Camera will not connect to my Wi-Fi network? A: Make sure the Wi-Fi signal is flashing. If the Wi-Fi signal is not flashing, you will need to press and hold Reset Button located at the back of the camera(see the Description section). - Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to a 5GHz network. - Test your Wi-Fi network work with other devices such as your phone or computer to make sure it is operation properly. - The Wi-Fi connection may be out of range during pairing. Use your phone to check range, it is recommended to have at least 2 signal bars showing for proper connection. - Your Wi-Fi network password is case sensitive, make sure you are entering it correctly. Q: The camera is o-line A:- Charing the doorbell and try again, to check if it is because of low batery. There may be a temporary issue with your internet connection (e.g., service disruption). Please try again in a few minutes. Make sure your Wi-Fi router is turned On. The camera may not have power to it, make sure the wall switch and breaker is in the On position. Make sure the camera is getting a good signal from your Wi-Fi router. Use your phone to check range, it is recommended to have at least 2 signal bars showing for proper connection. The camera may have been disconnected from your Wi-Fi network, press and hold Reset Button(see the Description section) until you hear an audible tone. Note: 1.) Make sure your smartphone already conneced to a 2.4GHz Wi-Fi and the Bluetooth turns ON. 2.) Press the ring button of the doorbell, then tap “scan” or “Smart camera(BLE)” from the app. OR Ring the bell make sure the blue indicator is blinking. DB203 DB203 Warn ing To as sure co ntinued co mpliance , an y ch an ges or modificat ions not ex pres sly ap pro ved by the part y.Res ponsible for co mplian ce co uld void the user’ s au thori ty to operat e this eq uipmen t. FCC Stat em en t Th is eq uipmen t co mplies with Par t 15 of the FCC Rules . Oper at ion is subje ct to the following two co nditions: (1 ) This dev ice may not cau se harm ful interf er en ce , an d (2 ) This dev ice must acce pt an y interf eren ce recei ved , incl uding interf eren ce that may cau se undes ire d operat ion. NOT E: Th is equipmen t has been tested an d found to co mply with the limits fo r a Clas s B digital dev ice, purs uan t to part 15 of the FCC ru les. Th ese limits ar e des igned to pro vide reas onab le pro tect ion ag ai nst harm ful inter fere nce in a re siden tial instal lat ion. This equipment gen er at es, uses an d can rad iat e rad io fre quen cy ener gy an d, if not instal led an d used in acco rd ance with the instructions, may cau se har mful inter fere nce to rad io co mmunicat ions. Ho wever, there is no guar an tee that interf eren ce will not occu r in a part icu lar instal lat ion. If this eq uipment does cau se harm ful interf eren ce to rad io or tel ev ision reception, which can be det erm ined by turn ing the eq uipmen t off an d on, the user is enco ura ged to try to co rr ect the inter fer en ce by one or more of the fo llowing meas ures : -Reo rien t or rel ocat e the re cei ving an ten na. -Incre as e the sep ara tion between the eq uipment an d re cei ver. -Connect the eq uipment into an outlet on a ci rcu it differ en t fro m that to which the recei ver is co nnec ted . -Consult the deal er or an ex peri en ce d rad io/TV tec hnici an fo r hel p. FCC Rad iat ion Exposure Stat em ent: Th is eq uipmen t co mplies with FCC rad iat ion ex posure limits set forth for an unco…
Text truncated - open the document above for the full version.
Rev1/26/2023 ShenzhenInterthingsTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023.06.09 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AQ7B-IPB203 ShenzhenInterthingsTechnologyCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Sincerely, RongliSun Rev1/26/2023 ShenzhenInterthingsTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023.06.09 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AQ7B-IPB203 ShenzhenInterthingsTechnologyCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredListasanentityproducing“covered” equipment. Sincerely, RongliSun
Rev11/20/07 ShenzhenInterthingsTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AQ7B-IPB203 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription Block SCH OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName UserManualUsermanual Sincerely, RongliSun 2023.06.09
ShenzhenInterthingsTechnologyCo.,Ltd. Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodel number. ProductionnameTrademarkFCCModelno. Doorbellcamera2AQ7B-IPB203IPB203,DB201 Confirmedby: RongliSun 2023.06.09
E:\ED200103042EES200103045KIDiBT780FCCID\work\POA_Letter_140225.docx ShenzhenInterthingsTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2023.06.09 SUBJECT:FCCApplicationfor(FCCID:2AQ7B-IPB203) ToWhomItMayConcern: We,theundersigned,herebyauthorizeEMTEK(DONGGUAN)CO.,LTD.atSamLvon ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhavethe sameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, RongliSun 2023.06.09
Report No. EDG2304230044E001Page 1 of 4Ver.1.0 FCC ID: 2AQ7B-IPB203 Report No. EDG2304230044E001Page 2 of 4Ver.1.0 Report No. EDG2304230044E001Page 3 of 4Ver.1.0 Report No. EDG2304230044E001Page 4 of 4Ver.1.0
Report No. EDG2304230044E001Page 1 of 4Ver.1.0 FCC ID: 2AQ7B-IPB203 Report No. EDG2304230044E001Page 2 of 4Ver.1.0 433MHzANT WIFI2.4ANT Report No. EDG2304230044E001Page 3 of 4Ver.1.0 Report No. EDG2304230044E001Page 4 of 4Ver.1.0
ReportNo.EDG2304230044E00103RPage1of8Ver.1.0 TESTREPORT ProductName:Doorbellcamera ModelNumber:IPB203,DB201 FCCID:2AQ7B-IPB203 Preparedfor:SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address:L310,JinhetianBusinessCenter,NO.329,3rdRoad Longhuan,HelianCommunity,LonghuaStreet,Longhua District,Shenzhen,China Preparedby:EMTEK(DONGGUAN)CO.,LTD. Address:-1&2/F.,Building2,ZoneA,ZhongdaMarineBiotechnology ResearchandDevelopmentBase,No.9,XinchengAvenue, SongshanhuHigh-technologyIndustrialDevelopmentZone, Dongguan,Guangdong,China TEL:+86-0769-22807078 FAX:+86-0769-22807079 ReportNumber:EDG2304230044E00103R Date(s)ofTests:May16,2023toJune06,2023 Dateofissue:June07,2023 $二维码$ ReportNo.EDG2304230044E00103RPage2of8Ver.1.0 TableofContents 1.TESTRESULTCERTIFICATION................................................................................................................................3 2.EUTSPECIFICATION.................................................................................................................................................6 3.TESTREQUIREMENT...............................................................................................................................................7 4.MEASUREMENTRESULT.........................................................................................................................................8 ReportNo.EDG2304230044E00103RPage3of8Ver.1.0 1.TESTRESULTCERTIFICATION Applicant: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: : L310,JinhetianBusinessCenter,NO.329,3rdRoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China Manufacturer: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: : L310,JinhetianBusinessCenter,NO.329,3rdRoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China Factory: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: L310,JinhetianBusinessCenter,NO.329,3rdRoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China EUT: Doorbellcamera ModelName: IPB203,DB201 Trademark: MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT FCC1.1310:§1.1307(b) PASS TheaboveequipmentwastestedbyEMTEK(DONGGUAN)CO.,LTD.Thetestdata,dataevaluation,test procedures,andequipmentconfigurationsshowninthisreportweremadeinaccordancewiththeprocedures giveninANSIC63.10(2013)andtheenergyemittedbythesampleEUTtestedasdescribedinthisreportisin compliancewiththerequirementsofFCCRules FCC1.1310:§1.1307(b) . Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport DateofTest:May16,2023toJune06,2023 Preparedby: XiaYang/Editor Reviewer: TimDong/Supervisor Approved&AuthorizedSigner: ReportNo.EDG2304230044E00103RPage4of8Ver.1.0 SamLv/Manager ReportNo.EDG2304230044E00103RPage5of8Ver.1.0 ModifiedHistory VersionReportNo.RevisionDateSummary EDG2304230044E00103R/OriginalReport ReportNo.EDG2304230044E00103RPage6of8Ver.1.0 2. EUTSpecification CharacteristicsDescription Product:Doorbellcamera ModelNumber: IPB203,DB201 Allproductsarethesame,onlythemodelnumberandcolorofappearance aredifferent HereweselectedIPB203forallthetest Sample:2# DeviceType: 2.4GWIFI+433.92MHzDoorbellcamera DataRate: 802.11b 802.11g 802.11n(20MHzchannelbandwidth) 802.11n(40MHzchannelbandwidth) Modulation: DSSSwithDBPSK/DQPSK/CCKfor802.11b; OFDMwithBPSK/QPSK/16QAM/64QAMfor802.11g/n; OperatingFrequency Range(s): 2412-2462MHzfor802.11b/g/n(HT20); 2422-2452MHzfor802.11n(HT40); 433.92MHz NumberofChannels: 11channelsfor802.11b/g/n(HT20); 7Channelsfor802.11n(HT40); 1channelfor433.92MHz TransmitPowerMax: Wifi2.4G:-0.90dBm(0.000813W) 433MHz:74.36dBuV@3m AntennaGain: WIFI2.4G:1.79dBi 433MHz:1.0dBi Powersupply: DC5V1AformUSB,DC3.7Vformbattery Evaluationapplied:MPEEvaluation SAREvaluation ReportNo.EDG2304230044E00103RPage7of8Ver.1.0 3. TestRequirement RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironment impactofhumanexposuretoradiofrequency(RF)Radiationasspecifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)/(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotalpowerinputtotheantenna,through thecalculation,wewillknowthedistancewheretheMPElimitisreached. AccordingtoANSIC63.10-2013 9.5EquationstocalculateEIRP CalculatetheEIRPfromtheradiatedfieldstrengthinthefarfieldusingEquation(22): EIRP=E+20log(d)−104.7(22) where EIRPistheequivalentisotropicallyradiatedpower,indBm Eisthefieldstrengthoftheemissionatthemeasurementdistance,indBμV/m disthemeasurementdistance,inm ReportNo.EDG2304230044E00103RPage8of8Ver.1.0 4. MeasurementResult WIFI2.4G Antennagain:1.79dBi Mode Frequ ency (MHz) Output Power (dBm) E.I.R.P (dBm) Target Power W/toler ance (dBm) Max tuneup power (dBm) toleranc e Max tuneup power (mW) tolerance Power Densityat R=20cm (mW/cm 2 ) Limit (mW/c m2) 802.11b 2412-0.900.890±111.260.0002501 2437-1.89-0.10-1±101.000.0001991 2462-3.15-1.36-2±1-10.790.0001581 802.11g 2412-7.20-5.41-4±1-50.320.0000631 2437-8.23-6.44-7±1-60.250.0000501 2462-9.48-7.69-8±1-70.200.0000401 802.11n (HT20) 2412-7.35-5.56-6±1-50.320.0000631 2437-8.26-6.47-7±1-60.250.0000501 2462-9.53-7.74-8±1-70.200.0000401 802.11n (HT40) 2422-7.69-5.90-6±1-50.320.0000631 2437-8.28-6.49-6±1-50.320.0000631 2452-9.10-7.31-7±1-60.250.0000501 433MHz Antennagain:1.0dBi ***EndofReport*** Channel Freq. (MHz) MaxField Strength (dBuV/m) peak output power (dBm) Tuneup Power (dBm) Maxtune uppower (dBm) Maxtune uppower (mW) Power Densityat R=20cm (mW/cm2) Limit (mW/cm2) 433.9274.36-19.80-20±1-190.0125890.000003151
ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add:Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] SPECIFICATIONSFORAPPROVAL CustomerName: ProductName:2.4GHzAntenna ProductModel: PartNumber:LJW01-17091602-R0A WriteBy:Huxuwen IssuedDate:2021-04-08 CUSTOMER ENGINEERR&DDEPTBUSSINESSDEPTAPPROVAL LEJIN R&DDEPTENGINEERDEPTAPPROVAL REVMODIFIEDDESCRIPTIONDATEREMARK V1.0InitialDraftRelease2021/04/08 ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add:Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] Index 1.Cover ································ 1 2.Index································2 3.ProductSpecification ·························· 3 4.TestEquipment&Conditions·······················3 5.TestReport ······························ 4 6.ReliabilityTest····························5 7.Assembletype ···························· 6 8.ProductDrawing···························8 ShenzhenLejinradiofrequencytechnologyCo.,LTD Lejin radio frequencyProprietary& Confidential© 2017 Lejin radio frequencyCorporation.All rightsreserved. Add:Rm 301B,A4Bld,JunfengInnovationPark,Fuyong,Baoan Dist,Shenzhen.Tel:0755-27780515Email:[email protected] 3. ProductSpecification A.ElectricalCharacteristics Frequency2400MHz~2500 MHz VSWR<2.0 Efficiency>40% Impedance50Ohm PolarizationLinear Gain ≤1.79dB B. Material& MechanicalCharacteristics Materialof RadiatorMetal Cable TypeN/A ConnectorTypeN/A Dimension19.0*3.50*3.75(H)mm C. Environmental OperationTemperature- 20 ̊C ~ + 70 ̊C StorageTemperature- 30 ̊C ~ + 85 ̊C Humidity40%~95% 4. Test Equipment& Conditions 1.NetworkAnalyzersAgilent8753D/5071C 2.HSPAand LTE protocoltest setR&S CMW500-PT 3.CommunicationsTest SetAgilent8960 4.3D ChamberTest System Chart1 Testtopology ShenzhenLejinradiofrequencytechnologyCo.,LTD Lejin radio frequencyProprietary& Confidential© 2017 Lejin radio frequencyCorporation.All rightsreserved. Add:Rm 301B,A4Bld,JunfengInnovationPark,Fuyong,Baoan Dist,Shenzhen.Tel:0755-27780515Email:[email protected] 5. Test Report 5.1 VoltageStandingWave Ratio(VSWR). Chart2 VSWR 5.2 Efficientand gain. Passive Test For 2.4G Freq(MHz) 24002410242024302440245024602470248024902500 Effi(%) 42.6246.8451.4755.0753.5448.0651.8049.3844.2142.7740.64 Gain(dBi) 1.471.441.561.651.541.791.621.591. 621.370.36 5.3 Radiationpattern. ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add:Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] 6. ReliabilityTest TestItemTestconditionEquipmentSpecificationResult 1 LowTemp. Storage Test Temperature:-30 °C, Time:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25 °C and humidityis65%foronehour,thenstep-downthe temp.to-30 °C inonehour,storeantennafor44hours; step-uptempto25°C,testantennaafter2hours. Temp.&Hu mi. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 2 High Temp./High Humid Storage Test Temperature:85°CHumidity:85%RHTime:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25°Cand humidityis65%foronehour,thenstep-upthetemp.to 80°Candthehumidityupto85%inonehour,store antennafor44hours;step-downtempto25 °C ,test antennaafter2hours. Temp.&Hu mi. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 3 Salt-Spray 6prayTest PlacingantennaintheSalt-SprayTester,setthetest condition,Temp:35±2°CHumidity:85%NaClsalt spray:5±1%.PHvalue:6.5~7.2Testtime:24hours Salt-Spray Tester Nocolor change Noappear rusting PASS 7.Assembletype(omitted) 8.ProductDrawing
ReportNo. EDG2304230044E00101RPage 1 of 68Ver.1.0 TEST REPORT ProductName : Doorbellcamera ModelNumber : IPB203,DB201 FCC ID : 2AQ7B-IPB203 Preparedfor:SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address:L310,JinhetianBusinessCenter,NO. 329, 3rd Road Longhuan,HelianCommunity,LonghuaStreet,Longhua District,Shenzhen,China Preparedby:EMTEK(DONGGUAN)CO., LTD. Address:-1&2/F.,Building2, ZoneA, ZhongdaMarineBiotechnology Researchand DevelopmentBase,No.9,XinchengAvenue, SongshanhuHigh-technologyIndustrialDevelopmentZone, Dongguan,Guangdong,China TEL:+86-0769-22807078 FAX:+86-0769-22807079 ReportNumber:EDG2304230044E00101R Date (s) of Test s:May 16, 2023to June06, 2023 Dateof issue:June07, 2023 $二维码$ ReportNo. EDG2304230044E00101RPage 2 of 68Ver.1.0 TABLEOF CONTENTS 1 TEST RESULTCERTIFICATION.............................................................................................................3 2 EUT TECHNICALDESCRIPTION............................................................................................................5 3 SUMMARYOF TEST RESULT................................................................................................................6 4 TEST METHODOLOGY............................................................................................................................7 4.1 GENERALDESCRIPTIONOF APPLIEDSTANDARDS...................................................................7 4.2 MEASUREMENTEQUIPMENTUSED..............................................................................................7 4.3 DESCRIPTIONOF TESTMODES....................................................................................................8 5 FACILITIESAND ACCREDITATIONS.....................................................................................................9 5.1 FACILITIES.........................................................................................................................................9 5.2 LABORATORYACCREDITATIONSANDLISTINGS........................................................................9 6 TEST SYSTEMUNCERTAINTY............................................................................................................10 7 SETUPOF EQUIPMENTUNDERTEST ................................................................................................11 7.1 RADIOFREQUENCYTESTSETUP1............................................................................................11 7.2 RADIOFREQUENCYTESTSETUP2............................................................................................11 7.3 CONDUCTEDEMISSIONTESTSETUP........................................................................................14 7.4 BLOCKDIAGRAMCONFIGURATIONOF TESTSYSTEM............................................................15 7.5 SUPPORTEQUIPMENT..................................................................................................................15 8 TEST REQUIREMENTS.........................................................................................................................16 8.1 DTS 6DB BANDWIDTH....................................................................................................................16 8.2 DTS 99% BANDWIDTH...................................................................................................................24 8.3 MAXIMUMPEAKCONDUCTEDOUTPUTPOWER.......................................................................32 8.4 MAXIMUMPOWERSPECTRALDENSITY.....................................................................................40 8.5 UNWANTEDEMISSIONSIN NON-RESTRICTEDFREQUENCYBANDS....................................48 8.6 RADIATEDSPURIOUSEMISSION.................................................................................................56 8.7 CONDUCTEDEMISSIONTEST......................................................................................................64 8.8 ANTENNAAPPLICATION................................................................................................................67 ReportNo. EDG2304230044E00101RPage 3 of 68Ver.1.0 1 TEST RESULTCERTIFICATION Applicant: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: : L310,JinhetianBusinessCenter,NO. 329, 3rd RoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China Manufacturer: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: : L310,JinhetianBusinessCenter,NO. 329, 3rd RoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China Factory: SHENZHENINTERTHINGSTECHNOLOGYCO.,LTD. Address: L310,JinhetianBusinessCenter,NO. 329, 3rd RoadLonghuan,Helian Community,LonghuaStreet,LonghuaDistrict,Shenzhen,China EUT: Doorbellcamera ModelName: IPB203,DB201 Trademark: MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTEST RESULT FCC47 CFRPart 2 , SubpartJ FCC47 CFRPart 15, SubpartC PASS The aboveequipmentwas testedby EMTEK(DONGGUAN) CO.,LTD.The test data,data evaluation, test procedures,and equipmentconfigurationsshownin this reportweremadein accordancewith the proceduresgivenin ANSIC63. 10 (20 13 ) and the energyemittedby the sampleEUT testedas described in this reportis in compliancewith the requirementsof FCCRulesPart 2 and Part 15.247 The test resultsof this reportrelateonly to the testedsampleidentifiedin this report. Dateof Test :May 16, 2023to June06, 2023 Preparedby : Xia Yang/Editor Reviewer: Tim Dong/ Supervisor Approved& AuthorizedSigner: SamLv / Manager ReportNo. EDG2304230044E00101RPage 4 of 68Ver.1.0 ModifiedHistory VersionReportNo.Rev isionDateSummary EDG2304230044E00101R/OriginalReport ReportNo. EDG2304230044E00101RPage 5 of 68Ver.1.0 2 EUT TECHNICALDESCRIPTION Note: for more details,pleaserefer to the User ’s manualof the EUT. CharacteristicsDescription Product:Doorbellcamera ModelNumber: IPB203,DB201 All productsare the same,only the modelnumberand colorof appearanceare different Herewe selectedIPB203for all the test SampleNumber:2# IEEE 802.11WLAN ModeSu pported: 802.11b 8…
Text truncated - open the document above for the full version.
Report No. EDG2304230044E001Page 1 of 2Ver.1.0 FCC ID: 2AQ7B-IPB203 Report No. EDG2304230044E001Page 2 of 2Ver.1.0
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.41 GHz - 2.46 GHz | 813.00 µW |

Digital Frame
Equipment Class
DTS - Digital Transmission System
Smart Two Way Security Camera
Equipment Class
NII - Unlicensed National Information Infrastructure TXSmart Doorbell
Equipment Class
DTS - Digital Transmission System
Smart Video Doorbell
Equipment Class
DTS - Digital Transmission System
Smart PTZ Camera
Equipment Class
DTS - Digital Transmission System