2AQ7B-IPC163Smart Baby Camera

ExternalPhotos ExternalPhotos M/N:IPC163 . ExternalPhotos M/N:IPC163 ExternalPhotos M/N:IPC163 ExternalPhotos M/N:IPC163 ExternalPhotos M/N:IPC163 PowerSupply

Internal InternalPhotos M/N:IPC163 InternalPhotos M/N:IPC163 InternalPhotos M/N:IPC163 EndofTestReport Wi-Fi Antenna

FCC ID: 2AQ7B-IPC163 EST Technology Co. ,Ltd Report No. ESTE-R2011197 Page 1 of 5 FCC 47 CFR MPE REPORT Shenzhen Interthings Technology Co., Ltd. Smart Baby Camera Model Number: IPC163 Additional Model: DG163BMPK, DG163BMBL, BKWIFICAMB FCC ID: 2AQ7B-IPC163 Prepared for: Shenzhen Interthings Technology Co., Ltd. Room305, T3 Building, Silicon Valley Compound, Longhua District, Shenzhen, China. Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2011197 Date of Test: Nov. 14~24, 2020 Date of Report: Nov. 26, 2020 FCC ID: 2AQ7B-IPC163 EST Technology Co. ,Ltd Report No. ESTE-R2011197 Page 2 of 5 Maximum Permissible Exposure 1. Applicable Standards Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. 1.1. Limits for Maximum Permissible Exposure (MPE) (a) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density FCC ID: 2AQ7B-IPC163 EST Technology Co. ,Ltd Report No. ESTE-R2011197 Page 3 of 5 1.2. MPE Calculation Method E (V/m) = d G×P×30 Power Density: Pd (W/m 2 ) = 377 E 2 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 d×377 G×P×30 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained FCC ID: 2AQ7B-IPC163 EST Technology Co. ,Ltd Report No. ESTE-R2011197 Page 4 of 5 2. Conducted Power Result Mode Frequency (MHz) Peak output power (dBm) Peak output power (mW) Target power (dBm) Antenna gain (dBi) (Linear) IEEE 802.11b 2412 18.96 78.705 18 ±2 2 1.585 2437 16.96 49.659 16±2 2 1.585 2462 15.21 33.189 15±2 2 1.585 IEEE 802.11g 2412 18.89 77.446 18 ±2 2 1.585 2437 16.68 46.559 16±2 2 1.585 2462 14.80 30.200 14±2 2 1.585 IEEE 802.11n HT20 2412 18.56 71.779 18 ±2 2 1.585 2437 16.76 47.424 16±2 2 1.585 2462 14.82 30.339 14±2 2 1.585 IEEE 802.11n HT40 2422 18.52 71.121 18 ±2 2 1.585 2437 17.07 50.933 17±2 2 1.585 2452 15.74 37.497 15±2 2 1.585 FCC ID: 2AQ7B-IPC163 EST Technology Co. ,Ltd Report No. ESTE-R2011197 Page 5 of 5 3. Calculated Result and Limit Mode Target power (dBm) Antenna gain Power Density (S) (mW/cm 2 ) Limited of Power Density (S) (mW/cm 2 ) Test Result (dBi) (Linear) 2.4G Band IEEE 802.11b 20 2 1.5850.03153 1 Compiles IEEE 802.11g 20 2 1.5850.03153 1 Compiles IEEE 802.11n HT20 20 2 1.5850.03153 1 Compiles IEEE 802.11n HT40 20 2 1.5850.03153 1 Compiles End of Test Report

FCC ID: 2AQ7B-IPC163 EST Technology Co., Ltd Report No. ESTE-R2011196 Page 1 of 81 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Shenzhen Interthings Technology Co., Ltd. Smart Baby Camera Model Number: IPC163 Additional Model: DG163BMPK, DG163BMBL, BKWIFICAMB FCC ID: 2AQ7B-IPC163 Prepared for: Shenzhen Interthings Technology Co., Ltd. Room305, T3 Building, Silicon Valley Compound, Longhua District, Shenzhen, China. Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2011196 Date of Test: Nov. 14~24, 2020 Date of Report: Nov. 26, 2020 FCC ID: 2AQ7B-IPC163 EST Technology Co., Ltd Report No. ESTE-R2011196 Page 2 of 81 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram ................................................................................................................................. 8 2.6. Test Mode ......................................................................................................................................... 9 2.7. Power Setting of Test Software ...................................................................................................... 10 2.8. Duty Cycle ...................................................................................................................................... 10 2.9. Channel List ................................................................................................................................... 13 2.10. Test Equipment List ....................................................................................................................... 14 3. 6DB BANDWIDTH .......................................................................................................................... 15 3.1. Limit ............................................................................................................................................... 15 3.2. Test Setup ....................................................................................................................................... 15 3.3. Spectrum Analyzer Setting ............................................................................................................. 15 3.4. Test Procedure ................................................................................................................................ 15 3.5. Test Result ...................................................................................................................................... 16 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 25 4.1. Limit ............................................................................................................................................... 25 4.2. Test Setup ....................................................................................................................................... 25 4.3. Spectrum Analyzer Setting ............................................................................................................. 25 4.4. Test Procedure ................................................................................................................................ 25 4.5. Test Result ...................................................................................................................................... 26 5. POWER SPECTRAL DENSITY .......................................................................................................... 35 5.1. Limit ............................................................................................................................................... 35 5.2. Test Setup ....................................................................................................................................... 35 5.3. Spectrum Analyzer Setting ............................................................................................................. 35 5.4. Test Procedure ................................................................................................................................ 35 5.5. Test Result ...................................................................................................................................... 36 6. CONDUCTED BAND EDGE ............................................................................................................. 45 6.1. Limit ............................................................................................................................................... 45 6.2. Test Setup ...…

Text truncated - open the document above for the full version.

TEST SETUP PHOTO Conducted Test Radiated Test (Below 1GHz) Radiated Test (Above 1GHz)