2AT9T-8002Tablet

Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 1 / 16 Test Plot 1#: GSM 850 High Body Back DUT: Tablet; Type: RugKing Pad 2 Pro; Serial: 3C1R-1 Communication System: Generic GPRS-2 slots (0); Frequency: 848.8 MHz; Duty Cycle: 1:4 Medium parameters used: f = 848.8 MHz; σ = 0.901 S/m; ε r = 43.087; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7441; ConvF(8.4, 8.36, 8.26) @848.8 MHz; Calibrated: 2025/09/11  Sensor-Surface: 1.4mm (Mechanical Surface Detection);  Electronics: DAE4 Sn1562; Calibrated: 2024/12/31  Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (8x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.11 W/kg Zoom Scan (5x5x7) /Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.79 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 1.40 W/kg SAR(1 g) = 1.01 W/kg; SAR(10 g) = 0.693 W/kg Smallest distance from peaks to all points 3 dB below = 16.1 mm Ratio of SAR at M2 to SAR at M1 = 72.9% Maximum value of SAR (measured) = 1.08 W/kg 0 dB = 1.08 W/kg = 0.33 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 2 / 16 Test Plot 2#: GSM 1900 Low Body Back DUT: Tablet; Type: RugKing Pad 2 Pro; Serial: 3C1R-1 Communication System: Generic GPRS-3 slots (0); Frequency: 1850.2 MHz; Duty Cycle: 1:2.66 Medium parameters used: f = 1850.2 MHz; σ = 1.396 S/m; ε r = 41.44; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7441; ConvF(6.94, 6.91, 6.83) @1850.2 MHz; Calibrated: 2025/09/11  Sensor-Surface: 1.4mm (Mechanical Surface Detection);  Electronics: DAE4 Sn1562; Calibrated: 2024/12/31  Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (8x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.977 W/kg Zoom Scan (5x5x7) /Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.766 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.660 W/kg Smallest distance from peaks to all points 3 dB below = 11.2 mm Ratio of SAR at M2 to SAR at M1 = 71.8% Maximum value of SAR (measured) = 1.20 W/kg 0 dB = 1.20 W/kg = 0.79 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 3 / 16 Test Plot 3#: WCDMA Band 2 Low Body Back DUT: Tablet; Type: RugKing Pad 2 Pro; Serial: 3C1R-1 Communication System: WCDMA (0); Frequency: 1852.4 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1852.4 MHz; σ = 1.394 S/m; ε r = 41.389; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7441; ConvF(6.94, 6.91, 6.83) @1852.4 MHz; Calibrated: 2025/09/11  Sensor-Surface: 1.4mm (Mechanical Surface Detection);  Electronics: DAE4 Sn1562; Calibrated: 2024/12/31  Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (8x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.26 W/kg Zoom Scan (5x5x7) /Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.503 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 2.07 W/kg SAR(1 g) = 1.14 W/kg; SAR(10 g) = 0.593 W/kg Smallest distance from peaks to all points 3 dB below = 9.3 mm Ratio of SAR at M2 to SAR at M1 = 58.3% Maximum value of SAR (measured) = 1.32 W/kg 0 dB = 1.32 W/kg = 1.21 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 4 / 16 Test Plot 4#: WCDMA Band 4 Mid Body Back DUT: Tablet; Type: RugKing Pad 2 Pro; Serial: 3C1R-1 Communication System: WCDMA (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1732.6 MHz; σ = 1.374 S/m; ε r = 40.954; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7441; ConvF(7.13, 7.09, 7) @1732.6 MHz; Calibrated: 2025/09/11  Sensor-Surface: 1.4mm (Mechanical Surface Detection);  Electronics: DAE4 Sn1562; Calibrated: 2024/12/31  Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (9x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.906 W/kg Zoom Scan (5x5x7) /Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.38 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = 0.867 W/kg; SAR(10 g) = 0.545 W/kg Smallest distance from peaks to all points 3 dB below = 10.1 mm Ratio of SAR at M2 to SAR at M1 = 60% Maximum value of SAR (measured) = 0.975 W/kg 0 dB = 0.975 W/kg = -0.11 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 5 / 16 Test Plot 5#: WCDMA Band 5 Mid Body Back DUT: Tablet; Type: RugKing Pad 2 Pro; Serial: 3C1R-1 Communication System: WCDMA (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.905 S/m; ε r = 42.755; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7441; ConvF(8.4, 8.36, 8.26) @836.6 MHz; Calibrated: 2025/09/11  Sensor-Surface: 1.4mm (Mechanical Surface Detection);  Electronics: DAE4 Sn1562; Calibrated: 2024/12/31  Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.39 W/kg Zoom Scan (5x5x7) /Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.47 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 2.38 W/kg SAR(1 g) = 1.12 W/kg; SAR(10 g) = 0.629 W/kg Smallest distance from peaks to all points 3 dB below = 9.6 mm Ratio of SAR at M2 to SAR at M1 = 61.4% Maximum value of SAR (measured) = 1.20 W/kg 0 dB = 1.20 W/kg = 0.79 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-SAA Page 6 / 16 Te…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 1 of 42 Appendix D-WCDMA Test Information: Sample No.: 3C1Q-5 Test Date: 2025/11/21~2025/11/28 Test Site: RF Test Mode: Transmitting Tester: Benny Li Test Result: Pass Environmental Conditions: Temperature: (°C) 21.4~22.6 Relative Humidity: (%) 36~40 ATM Pressure: (kPa) 101.1 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 2 of 42 RF Output Power FCC Part 22H, RSS-132 WCDMA Band 5, Normal Mode Average Conducted Power(dBm) ERP (dBm) FCC Limit (dBm) IC Limit (dBm) Verdict R99_Low 23.23 14.68 38.45 34.77 Pass R99_Middle 23.28 14.73 38.45 34.77 Pass R99_High 23.23 14.68 38.45 34.77 Pass HSDPA_Low_Subtest1 21.81 13.26 38.45 34.77 Pass HSDPA_Low_Subtest2 21.47 12.92 38.45 34.77 Pass HSDPA_Low_Subtest3 21.60 13.05 38.45 34.77 Pass HSDPA_Low_Subtest4 21.53 12.98 38.45 34.77 Pass HSDPA_Middle_Subtest1 21.82 13.27 38.45 34.77 Pass HSDPA_Middle_Subtest2 21.93 13.38 38.45 34.77 Pass HSDPA_Middle_Subtest3 21.70 13.15 38.45 34.77 Pass HSDPA_Middle_Subtest4 21.58 13.03 38.45 34.77 Pass HSDPA_High_Subtest1 21.77 13.22 38.45 34.77 Pass HSDPA_High_Subtest2 21.53 12.98 38.45 34.77 Pass HSDPA_High_Subtest3 21.49 12.94 38.45 34.77 Pass HSDPA_High_Subtest4 21.40 12.85 38.45 34.77 Pass HSUPA_Low_Subtest1 22.81 14.26 38.45 34.77 Pass HSUPA_Low_Subtest2 22.88 14.33 38.45 34.77 Pass HSUPA_Low_Subtest3 22.97 14.42 38.45 34.77 Pass HSUPA_Low_Subtest4 22.94 14.39 38.45 34.77 Pass HSUPA_Low_Subtest5 22.94 14.39 38.45 34.77 Pass HSUPA_Middle_Subtest1 22.92 14.37 38.45 34.77 Pass HSUPA_Middle_Subtest2 22.91 14.36 38.45 34.77 Pass HSUPA_Middle_Subtest3 22.90 14.35 38.45 34.77 Pass HSUPA_Middle_Subtest4 22.90 14.35 38.45 34.77 Pass HSUPA_Middle_Subtest5 22.88 14.33 38.45 34.77 Pass HSUPA_High_Subtest1 22.88 14.33 38.45 34.77 Pass HSUPA_High_Subtest2 22.87 14.32 38.45 34.77 Pass HSUPA_High_Subtest3 22.85 14.30 38.45 34.77 Pass HSUPA_High_Subtest4 22.83 14.28 38.45 34.77 Pass HSUPA_High_Subtest5 22.94 14.39 38.45 34.77 Pass Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 3 of 42 Mode Average Conducted Power(dBm) ERP (dBm) FCC Limit (dBm) IC Limit (dBm) Verdict HSPA+_Low_Subtest1 22.88 14.33 38.45 34.77 Pass HSPA+_Middle_Subtest1 22.84 14.29 38.45 34.77 Pass HSPA+_High_Subtest1 22.79 14.24 38.45 34.77 Pass DC-HSDPA_Low_Subtest1 22.91 14.36 38.45 34.77 Pass DC-HSDPA_Low_Subtest2 22.86 14.31 38.45 34.77 Pass DC-HSDPA_Low_Subtest3 22.94 14.39 38.45 34.77 Pass DC-HSDPA_Low_Subtest4 22.90 14.35 38.45 34.77 Pass DC-HSDPA_Middle_Subtest1 22.78 14.23 38.45 34.77 Pass DC-HSDPA_Middle_Subtest2 22.74 14.19 38.45 34.77 Pass DC-HSDPA_Middle_Subtest3 22.72 14.17 38.45 34.77 Pass DC-HSDPA_Middle_Subtest4 22.71 14.16 38.45 34.77 Pass DC-HSDPA_High_Subtest1 22.88 14.33 38.45 34.77 Pass DC-HSDPA_High_Subtest2 22.85 14.30 38.45 34.77 Pass DC-HSDPA_High_Subtest3 22.84 14.29 38.45 34.77 Pass DC-HSDPA_High_Subtest4 22.79 14.24 38.45 34.77 Pass Note: ERP = Average Conducted Power(dBm) + Antenna Gain(dBd) Antenna Gain(dBd) = Antenna Gain(dBi) - 2.15 Band 5: Antenna Gain = -6.4dBi; Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 4 of 42 FCC Part 24E, RSS-133 WCDMA Band 2, Normal Mode Average Conducted Power(dBm) EIRP (dBm) Limit (dBm) Verdict R99_Low 22.31 15.01 33 Pass R99_Middle 22.35 15.05 33 Pass R99_High 22.27 14.97 33 Pass HSDPA_Low_Subtest1 21.27 13.97 33 Pass HSDPA_Low_Subtest2 21.35 14.05 33 Pass HSDPA_Low_Subtest3 20.82 13.52 33 Pass HSDPA_Low_Subtest4 21.42 14.12 33 Pass HSDPA_Middle_Subtest1 21.22 13.92 33 Pass HSDPA_Middle_Subtest2 21.39 14.09 33 Pass HSDPA_Middle_Subtest3 20.95 13.65 33 Pass HSDPA_Middle_Subtest4 21.54 14.24 33 Pass HSDPA_High_Subtest1 21.29 13.99 33 Pass HSDPA_High_Subtest2 21.35 14.05 33 Pass HSDPA_High_Subtest3 20.73 13.43 33 Pass HSDPA_High_Subtest4 21.38 14.08 33 Pass HSUPA_Low_Subtest1 21.62 14.32 33 Pass HSUPA_Low_Subtest2 21.74 14.44 33 Pass HSUPA_Low_Subtest3 21.61 14.31 33 Pass HSUPA_Low_Subtest4 21.75 14.45 33 Pass HSUPA_Low_Subtest5 21.76 14.46 33 Pass HSUPA_Middle_Subtest1 21.81 14.51 33 Pass HSUPA_Middle_Subtest2 21.73 14.43 33 Pass HSUPA_Middle_Subtest3 21.77 14.47 33 Pass HSUPA_Middle_Subtest4 21.73 14.43 33 Pass HSUPA_Middle_Subtest5 21.74 14.44 33 Pass HSUPA_High_Subtest1 21.75 14.45 33 Pass HSUPA_High_Subtest2 21.75 14.45 33 Pass HSUPA_High_Subtest3 21.78 14.48 33 Pass HSUPA_High_Subtest4 21.73 14.43 33 Pass HSUPA_High_Subtest5 21.70 14.40 33 Pass Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 5 of 42 Mode Average Conducted Power(dBm) EIRP (dBm) Limit (dBm) Verdict HSPA+_Low_Subtest1 21.71 14.41 33 Pass HSPA+_Middle_Subtest1 21.72 14.42 33 Pass HSPA+_High_Subtest1 21.70 14.40 33 Pass DC-HSDPA_Low_Subtest1 21.74 14.44 33 Pass DC-HSDPA_Low_Subtest2 21.69 14.39 33 Pass DC-HSDPA_Low_Subtest3 21.79 14.49 33 Pass DC-HSDPA_Low_Subtest4 21.74 14.44 33 Pass DC-HSDPA_Middle_Subtest1 21.78 14.48 33 Pass DC-HSDPA_Middle_Subtest2 21.71 14.41 33 Pass DC-HSDPA_Middle_Subtest3 21.78 14.48 33 Pass DC-HSDPA_Middle_Subtest4 21.72 14.42 33 Pass DC-HSDPA_High_Subtest1 21.70 14.40 33 Pass DC-HSDPA_High_Subtest2 21.76 14.46 33 Pass DC-HSDPA_High_Subtest3 21.76 14.46 33 Pass DC-HSDPA_High_Subtest4 21.72 14.42 33 Pass Note: EIRP = Average Conducted Power(dBm) + Antenna Gain(dBi) Band 2: Antenna Gain = -7.3dBi; Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix D-WCDMA Page 6 of 42 FCC Part 27, RSS-139 WCDMA Band 4, Normal Mode Average Conducted Power(dBm) EIRP (dBm) Limit (dBm) Verdict R99_Low 22.51 15.01 30 Pass R99_Middle 22.48 14.98 30 Pass R99_High 22.49 14.99 30 Pass HSDPA_Low_Subtest1 21.29 13.79 30 Pass HSDPA_Low_Subtest2 21.32 13.82 30 Pass HSDPA_Low_Subtest3 22.10 14.60 30 Pass HSDPA_Low_Subtest4 22.17 14.67 30 Pass HSDPA_Middle_Subtest1 21.66 14.16 30 Pass HSDPA_Middle_Subtest2 21.78 14.28 30 Pass HSDPA_Middle_Subtest3 22.35 14.85 30 Pass HSDPA_M…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 1 of 27 Appendix C-GSM Test Information: Sample No.: 3C1Q-5 Test Date: 2025/11/21 Test Site: RF Test Mode: Transmitting Tester: Benny Li Test Result: Pass Environmental Conditions: Temperature: (°C) 21.9 Relative Humidity: (%) 40 ATM Pressure: (kPa) 101.1 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 2 of 27 RF Output Power FCC Part 22H, RSS-132 GSM 850, Normal Mode Average Conducted Power(dBm) ERP (dBm) FCC Limit (dBm) IC Limit (dBm) Verdict GSM_Low 32.84 24.29 38.45 34.77 Pass GSM_Middle 32.95 24.40 38.45 34.77 Pass GSM_High 33.01 24.46 38.45 34.77 Pass GPRS_Low_Slot1 32.89 24.34 38.45 34.77 Pass GPRS_Low_Slot2 30.83 22.28 38.45 34.77 Pass GPRS_Low_Slot3 28.94 20.39 38.45 34.77 Pass GPRS_Low_Slot4 27.01 18.46 38.45 34.77 Pass GPRS_Middle_Slot1 32.94 24.39 38.45 34.77 Pass GPRS_Middle_Slot2 30.88 22.33 38.45 34.77 Pass GPRS_Middle_Slot3 29.00 20.45 38.45 34.77 Pass GPRS_Middle_Slot4 27.09 18.54 38.45 34.77 Pass GPRS_High_Slot1 33.02 24.47 38.45 34.77 Pass GPRS_High_Slot2 30.95 22.40 38.45 34.77 Pass GPRS_High_Slot3 29.07 20.52 38.45 34.77 Pass GPRS_High_Slot4 27.16 18.61 38.45 34.77 Pass EDGE_Low_Slot1 25.90 17.35 38.45 34.77 Pass EDGE_Low_Slot2 24.92 16.37 38.45 34.77 Pass EDGE_Low_Slot3 22.54 13.99 38.45 34.77 Pass EDGE_Low_Slot4 20.47 11.92 38.45 34.77 Pass EDGE_Middle_Slot1 26.03 17.48 38.45 34.77 Pass EDGE_Middle_Slot2 25.04 16.49 38.45 34.77 Pass EDGE_Middle_Slot3 22.80 14.25 38.45 34.77 Pass EDGE_Middle_Slot4 20.44 11.89 38.45 34.77 Pass EDGE_High_Slot1 25.85 17.30 38.45 34.77 Pass EDGE_High_Slot2 24.79 16.24 38.45 34.77 Pass EDGE_High_Slot3 22.56 14.01 38.45 34.77 Pass EDGE_High_Slot4 20.30 11.75 38.45 34.77 Pass Note: ERP = Average Conducted Power(dBm) + Antenna Gain(dBd) Antenna Gain(dBd) = Antenna Gain(dBi) - 2.15 GSM 850: Antenna Gain = -6.4dBi; Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 3 of 27 FCC Part 24E, RSS-133 GSM 1900, Normal Mode Average Conducted Power(dBm) EIRP (dBm) Limit (dBm) Verdict GSM_Low 29.74 22.44 33 Pass GSM_Middle 29.81 22.51 33 Pass GSM_High 29.97 22.67 33 Pass GPRS_Low_Slot1 29.75 22.45 33 Pass GPRS_Low_Slot2 27.74 20.44 33 Pass GPRS_Low_Slot3 26.14 18.84 33 Pass GPRS_Low_Slot4 24.37 17.07 33 Pass GPRS_Middle_Slot1 29.79 22.49 33 Pass GPRS_Middle_Slot2 27.72 20.42 33 Pass GPRS_Middle_Slot3 26.13 18.83 33 Pass GPRS_Middle_Slot4 24.47 17.17 33 Pass GPRS_High_Slot1 30.01 22.71 33 Pass GPRS_High_Slot2 27.65 20.35 33 Pass GPRS_High_Slot3 26.10 18.80 33 Pass GPRS_High_Slot4 24.36 17.06 33 Pass EDGE_Low_Slot1 26.74 19.44 33 Pass EDGE_Low_Slot2 25.11 17.81 33 Pass EDGE_Low_Slot3 22.82 15.52 33 Pass EDGE_Low_Slot4 20.78 13.48 33 Pass EDGE_Middle_Slot1 26.63 19.33 33 Pass EDGE_Middle_Slot2 25.00 17.70 33 Pass EDGE_Middle_Slot3 22.68 15.38 33 Pass EDGE_Middle_Slot4 20.62 13.32 33 Pass EDGE_High_Slot1 26.07 18.77 33 Pass EDGE_High_Slot2 24.40 17.10 33 Pass EDGE_High_Slot3 22.07 14.77 33 Pass EDGE_High_Slot4 19.99 12.69 33 Pass Note: EIRP = Average Conducted Power(dBm) + Antenna Gain(dBi) GSM 1900: Antenna Gain = -7.3dBi; Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 4 of 27 Peak-to-average Ratio(PAR) FCC Part 22H, RSS-132 GSM 850, Normal Mode Result (dB) Limit (dB) GSM_Low 0.26 13 GSM_Middle 0.26 13 GSM_High 0.29 13 GPRS_Low_GMSK 0.20 13 GPRS_Middle_GMSK 0.26 13 GPRS_High_GMSK 0.26 13 EDGE_Low_8PSK 3.07 13 EDGE_Middle_8PSK 3.13 13 EDGE_High_8PSK 3.01 13 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 5 of 27 FCC Part 24E, RSS-133 GSM 1900, Normal Mode Result (dB) Limit (dB) GSM_Low 0.20 13 GSM_Middle 0.23 13 GSM_High 0.26 13 GPRS_Low_GMSK 0.20 13 GPRS_Middle_GMSK 0.23 13 GPRS_High_GMSK 0.23 13 EDGE_Low_8PSK 2.93 13 EDGE_Middle_8PSK 2.72 13 EDGE_High_8PSK 2.38 13 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 6 of 27 Occupied Bandwidth FCC Part 22H, RSS-132 GSM 850, Normal Mode 99% OBW (MHz) 26dB BW (MHz) GSM_Low 0.241 0.312 GSM_Middle 0.244 0.318 GSM_High 0.239 0.316 GPRS_Low_GMSK 0.239 0.311 GPRS_Middle_GMSK 0.244 0.311 GPRS_High_GMSK 0.242 0.310 EDGE_Low_8PSK 0.245 0.312 EDGE_Middle_8PSK 0.243 0.307 EDGE_High_8PSK 0.242 0.308 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 7 of 27 GSM 850, Normal GSM_Low GSM_Middle GSM_High GPRS_Low_GMSK GPRS_Middle_GMSK GPRS_High_GMSK Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 8 of 27 EDGE_Low_8PSK EDGE_Middle_8PSK EDGE_High_8PSK Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 9 of 27 FCC Part 24E, RSS-133 GSM 1900, Normal Mode 99% OBW (MHz) 26dB BW (MHz) GSM_Low 0.240 0.309 GSM_Middle 0.242 0.311 GSM_High 0.245 0.312 GPRS_Low_GMSK 0.239 0.319 GPRS_Middle_GMSK 0.240 0.307 GPRS_High_GMSK 0.240 0.318 EDGE_Low_8PSK 0.243 0.307 EDGE_Middle_8PSK 0.245 0.312 EDGE_High_8PSK 0.242 0.310 Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 10 of 27 GSM 1900, Normal GSM_Low GSM_Middle GSM_High GPRS_Low_GMSK GPRS_Middle_GMSK GPRS_High_GMSK Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 11 of 27 EDGE_Low_8PSK EDGE_Middle_8PSK EDGE_High_8PSK Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 12 of 27 Spurious Emissions at Antenna Terminal FCC Part 22H, RSS-132 GSM 850, Normal GSM_Low Below 1G Above 1G GSM_Middle Below 1G Above 1G GSM_High Below 1G Above 1G Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 13 of 27 GPRS_Low_GMSK Below 1G Above 1G GPRS_Middle_GMSK Below 1G Above 1G GPRS_High_GMSK Below 1G Above 1G Shenzhen Accurate Technology Co., Ltd. Report No.:2504Y12371E-RFG Appendix C-GSM Page 14 of 27 EDGE_Low_8PSK Below 1G Above 1G EDGE_Middle_8PSK Below 1G Above 1G EDGE_High_8PSK Below 1G Above 1…

Text truncated - open the document above for the full version.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 41 TR-4-E-R165 TEST REPORT Applicant Name: Shenzhen Ulefone Technology Co., Ltd. Address(FCC): 7A01, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District, Shenzhen City, Guangdong Province China Address(IC): 7A01, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District Shenzhen City Guangdong 518110 China Report Number: 2504Y12371E-RFG FCC ID: 2AT9T-8002 IC: 28620-8002 Test Standard (s) FCC PART 22H; FCC PART 24E; FCC PART 27 RSS-130 ISSUE 2, FEBRUARY 2019; RSS-132 ISSUE 4, JANUARY 31, 2023 RSS-133 ISSUE 7, JULY 24, 2024; RSS-139 ISSUE 4, OCTOBER 2022, AMENDMENT RSS-199 ISSUE 4, JULY 2023; RSS-GEN, ISSUE 5, FEBRUARY 2021 AMENDMENT 2 Sample Description Product Name: Tablet Model No.(FCC): RugKing Pad 2 Pro, GQ8002, RugKing Pad 2, RugKing Pad 2 Ultra, RugKing Pad 2E, RugKing Pad 2S, RugKing Pad 2 Lite, RugKing Pad 2 Pro+, RugKing Pad 2s, RugKing Pad 2s Pro Model No.(IC): RugKing Pad 2 Pro Trade Mark: ulefone Date Received: 2025-10-30 Report Date: 2026-01-27 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Amanda Wei Bob.Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2504Y12371E-RFG Rev:A/4.0(2024/11/01) Page 2 of 41 TR-4-E-R165 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 4 GENERAL INFORMATION ............................................................................................................................ 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 5 OBJECTIVE ................................................................................................................................................... 6 TEST METHODOLOGY .................................................................................................................................... 6 TEST FACILITY .............................................................................................................................................. 7 MEASUREMENT UNCERTAINTY ....................................................................................................................... 7 SYSTEM TEST CONFIGURATION ............................................................................................................... 8 DESCRIPTION OF TEST CONFIGURATION......................................................................................................... 8 EQUIPMENT MODIFICATIONS .......................................................................................................................... 9 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................... 9 EXTERNAL I/O CABLE .................................................................................................................................... 9 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................. 9 SUMMARY OF TEST RESULTS ................................................................................................................. 11 TEST EQUIPMENT LIST ............................................................................................................................. 12 RF EXPOSURE ............................................................................................................................................ 13 APPLICABLE STANDARD ............................................................................................................................... 13 CHANNELLING ARRANGEMENTS & FREQUENCY PLAN & INTEROPERABILITY REQUIREMENT .. 14 APPLICABLE STANDARD ............................................................................................................................... 14 RESULT ...................................................................................................................................................... 14 MODULATION CHARACTERISTIC & TYPES ............................................................................................ 15 APPLICABLE STANDARD ............................................................................................................................... 15 RESULT ...................................................................................................................................................... 15 RF OUTPUT POWER ................................................................................................................................... 16 APPLICABLE STANDARD ............................................................................................................................... 16 TEST PROCEDURE ............................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 1 OTA TEST REPORT Applicant Shenzhen General Test System Co., Ltd Product RayZone1800 Issue Date December 8, 2025 Shenzhen Fu Bang Wireless Technology Co., Ltd. tested the above equipment in accordance with the requirements in ANTI/IEEE Std 149-2008.The test results show that the equipment tested is capable of demonstrating compliance with the Requirements as documented in this report. Prepared by: Tong Dong Approved by: ZhangHong Lai Shenzhen Fu Bang Wireless Technology Co., Ltd. Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China 1. Test Laboratory Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 2 1.1 Notes of the Test report This report shall not be reproduced in full or partial. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of applicable standards stated above. 1.2 Test facility GTS1800 Microwave Anechoic Chamber ：testing frequency ranges from 600MHz to 6GHz . 1.3 Testing Location Company: Shenzhen Fu Bang Wireless Technology Co., Ltd Address: Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China Contact: Tong Dong Telephone: 15721979352 E-mail: [email protected] 1.4 Laboratory Environment 2. General Description of Equipment under Test 2.1 Applicant and Manufacturer information Temperature Min.= 19°C, Max.=25°C Relative humidity Min.=40%，Max.=72% Shield effect 0.6-7GHz >100dB Ground resistance <0.5Ω Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 3 Applicant Name Shenzhen General Test System Co., Ltd Applicant address Building C-A7 Suite 805,2190 Liuxian Avenue, Nanshan District, Shenzhen, P.R. China Manufacturer Name Shenzhen General Test System Co., Ltd Manufacturer address Building C-A7 Suite 805,2190 Liuxian Avenue, Nanshan District, Shenzhen, P.R. China 2.2 General information EUT Description Product Name RayZone1800 Model GTS-ANT D-H HW Version RayZone1800 V1.0 SW Version MaxSign 100 Antenna Type PCB Antenna Antenna Manufacturer Shenzhen General Test System Co., Ltd Test Frequency 700MHz-5.8GHz 2.3 Applied Standards According to the specifications of the manufacturer, it must comply with the requirements of the following standards: Test Method: ANSI/IEEE Std 149-2008 3. Test Conditions 3.1 Test Configuration The method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test (EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 1m. 3.2 Test Measurement Spherical coordinate system Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 4 Figure 1 Test coordinate system Note: Theta is from 0-180degree.Phi is from EUT and record the Date, the step of rotation is 15 degree. Test Setup 4. Test Results Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 5 4.1 Gain and Efficiencynbv cxkjhgfds[poiuytrq-0987632 2/3/4G antenna gain Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 700 27.47 -7.8 1990 38.11 -8.3 710 24.98 -9.6 2010 45.81 -8.2 720 24.25 -9.7 2030 41.88 -8.6 730 23.78 -9.8 2050 42.36 -8.6 740 26.61 -9.8 2070 38.73 -8.7 750 28.37 -9.9 2090 31.77 -8.1 760 29.29 -9.7 2110 32.89 -8.3 770 33.68 -9.5 2130 33.5 -8.5 780 27.47 -9.6 2150 37.24 -8.6 790 25.17 -9.7 2170 44.36 -8.7 800 23.55 -7.1 2190 45.92 -8.8 810 30.56 -6.9 2210 37.67 -8.9 820 27.47 -6.4 2230 33.5 -9.1 830 24.98 -6.7 2250 30.41 -9.2 840 24.25 -6.5 2270 33.34 -9.3 850 23.78 -6.4 2290 38.64 -9.5 860 26.61 -6.6 2310 37.33 -8.7 870 28.37 -6.7 2330 39.45 -8.5 880 33.34 -9.2 2350 38.73 -8.5 890 38.66 -9.3 2370 35.56 -8.3 900 39.97 -9.5 2390 35.24 -8.4 910 42.57 -9.5 2410 32.89 -8.4 920 39.81 -9.6 2430 34.91 -8.7 940 29.38 -9.7 2450 36.56 -8.0 960 21.43 -9.7 2470 34.75 -8.8 1710 28.25 -7.5 2490 36.81 -8.7 1730 32.06 -7.6 2510 37.58 -8.6 1750 31.55 -7.7 2530 34.36 -8.5 1770 32.43 -7.7 2550 32.89 -8.3 1790 32.89 -7.6 2570 29.11 -8.0 1810 31.62 -7.3 2590 27.67 -8.1 1830 29.11 -7.5 2610 25.53 -8.2 1850 26.42 -7.7 2630 23.07 -8.6 1870 27.48 -7.3 2650 22.96 -8.6 1890 28.71 -7.4 2670 22.03 -8.5 1910 33.42 -7.5 2690 20.18 -8.3 1930 34.83 -8.1 1950 36.64 -8.2 1970 36.48 -8.2 Shenzhen Fu Bang Wirless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen Fu Bang Wireless Technology Co., Ltd. Page 6 GPS/2.4G&5G WIFI/BT antenna gain Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 1550 51.64 -2.1 5390 31.77 -2.6 1555 47.86 -2.2 5410 32.81 -2.7 1560 52.36 -2.3 5430 29.99 -2.7 1565 46.88 -2.5 5450 30.62 -2.7 1570 50.7 -2.3 5470 29.51 -2.5 1575 44.36 -2.5 5490 29.99 -2.7 1580 50.23 -2.1 5510 28.18 -2.8 1585 43.45 -2.3 5530 29.17 -2.8 1590 50.7 -2.2 5550 27.8 -2.9 1595 44.67 -2.2 5570 28.38 -2.4 1600 51.52 -2.2 5590 29.38 -2.4 2400 36.06 -2.02 5610 29.04 -2.6 2410 37.84 -2.5 5630 27.93 -2.7 2420 39.63 -2.3 5650 27.29 -2.5 2430 40.74 -2.1 5670 25.23 -2.9 2440 40.64 -2.5 5690 24.15 -2.8 2450 39.81 -2.3 5710 23.28 -2.5 2460 40.09 -2.4 5730 …

Text truncated - open the document above for the full version.