2AUCU-44102ZZ-WAVE+ 15A TR RECEPTACLE

Instruction Bulletin Boletín de instrucciones Directives d'utilisation GDE77981 Rev. 01, 05/2021 SQR44102**Z Z-Wave ™ Plus Receptacle Spanish French Retain for future use. / Conservar para uso futuro. / À conserver pour usage ultérieur. ™ ** = color code / código de color / code de couleur : WH (white / blanco / blanc), LA (light almond / marfil / vert amande claire), BK (black / negro / noir), GY (gray / gris / gris) Replaces / Reemplaza / Remplace GDE77981, 09/2020 FeaturesCaracterísticasCaractéristiques • Wireless Z-Wave technology creates a mesh network for command and control interoperability with other Z-Wave compliant controllers and devices. •Tamper resistant on both outlets. •In duplex outlets, one outlet is always on and the other outlet is Z-Wave controlled. •Supports over-the-air (OTA) upgrade. •Z-Wave controlled outlets feature: — Manual and remote ON/OFF control of any connected lighting and other electrical connected to a Z-Wave controlled outlet. — Programmable delayed OFF time. — Three configurable power ON states. — Child lockout capability. — 3-way (multi-location) application along with Z-Wave wireless auxiliary switch, SQR50101**Z. •Measures the total energy usage of the connected loading on both outlets and displays the actual consumption (in W) and the accumulated power used (in kWh) in the user interface of the gateway. •La tecnología inalámbrica Z-Wave crea una red de malla para la interoperabilidad de comandos y controles con otros controladores y dispositivos compatibles con Z-Wave. • • En tomacorrientes dobles: un tomacorriente está siempre encendido, y el otro tomacorriente está controlado por Z-Wave. • • — Control de encendido/apagado manual y remoto de todas las luminarias y otros dispositivos eléctricos conectados al tomacorriente controlado por Z-Wave. — — — — • • La technologie sans filZ-Wave crée un réseau maillé pour assurer l’interopérabilité du commandement et des commandes avec d’autres télécommandes et dispositifs compatibles avec Z-Wave. • • Dans une configuration de prise duplex, une prise est toujours sous tension tandis que l’autre est commandée par Z-Wave. • • — Commande manuelle et à distance de mise sous/hors tension des éclairages connectés et des équipements électriques branchés sur une prise commandée par Z-Wave. — — — — • NOTE:NOTA: REMARQUE: •Power ON state indicates the initial status of the device when it is powered on. •Turn the device OFF to upgrade. •Please refer to the user manual for SQR50101**Z for the 3-way (multi-location) application. •Please refer to the gateway installation manual for energy usage display and energy measurement features. • • • • Consulte las funciones de indicación del uso de energía y medición de energía en el manual de instalación de la pasarela. • • • • Veuillez vous reporter au guide d’installation de la passerelle pour l’affichage de la consommation d’énergie et les fonctions de mesure de l’énergie. SQR44102**Z Z-Wave Tamper Resistant Receptacle Energy Monitoring Specifications / Especificaciones de monitoreo de energía del receptáculo de seguridad Z-Wave SQR44101**Z / Prise sécurisée SQR44101**Z-Wave – Spécifications de surveillance de l’énergie Voltage / Tensión / Tension125 Vac, 60 Hz / 125 Vca, 60 Hz / 125 V CA, 60 Hz Regular outlet / Tomacorriente regular / Prise régulière Current / Corriente / Courant15 A Controlled outlet / Tomacorriente controlado / Sortie commandée Incandescent lights / Luces incandescentes / Voyants à incandescence1000W LED lights / Luces LED / Voyants DEL5 A Standard Ballast / Balasto estándar / Ballast standard1200 Va / 1200 Va / 1 200 VA Resistive load / Carga resistiva / Charge résistive15 A Motor / Motor / Moteur1/2 Hp Operating Temperature / Temperatura de operación / Température de fonctionnement32–104°F (0–40°C) / De 32 ºF a 104 ºF (de 0 ºC a 40 ºC) / 32 à 104 °F (0 à 40 °C) Supply Connection / Conexión de alimentación / Raccordement à l'alimentation14 AWG 1 1 Suitable for at least 194°F (90°C). / Apto para al menos 194°F (90 ° C). / Convient pour au moins 194°F (90 °C). Wireless Type / Tipo inalámbrico / Type sans filZ-Wave (Support S2 and SmartStart) / Z-Wave (admite S2 y SmartStart) / Z-Wave (prend en charge S2 et SmartStart) Wireless Frequency / Frecuencia inalámbrica / Fréquence radio908.40 MHz / 908.42 MHz / 916 MHz PrecautionsPrecaucionesPrécautions DANGER / PELIGRO / DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH • Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E, NOM-029-STPS-2011 or CSA Z462 or local equivalent. • This equipment must only be installed and serviced by qualified electrical personnel. • Turn off all power supplying this equipment before working on or inside equipment. • Always use a properly rated voltage sensing device to confirm power is off. • Use with copper wire only. • Indoor use only. • Replace all devices, doors, and covers before turning on power to this equipment. PELIGRO DE DESCARGA ELÉCTRICA, EXPLOSIÓN O DESTELLO POR ARQUEO • Utilice equipo de protección personal (EPP) apropiado y siga las prácticas de seguridad eléctrica establecidas por su Compañía, consulte la norma 70E de NFPA, NOM-029-STPS-2011 o CSA Z462 o la norma local equivalente. • Solamente el personal eléctrico especializado deberá instalar y prestar servicio de mantenimiento a este equipo. • Desenergice el equipo antes de realizar cualquier trabajo en él. • Siempre utilice un dispositivo detector de tensión nominal adecuado para confirmar la desenergización del equipo. • Use solo con conductores de cobre. • Para uso en interiores solamente. • Vuelva a colocar todos los dispositivos, las puertas y las cubiertas antes de volver a energizar el equipo. RISQUE D'ÉLECTROCUTION, D'EXPLOSION OU D'ÉCLAIR D'ARC ÉLECTRIQUE • Portez un équipement de protection individuelle (ÉPI) approprié et observez les méthodes de travail électrique sécuritaire. Voir NFPA 70E, NOM-029-STPS-2011 ou CSA Z462 ou aux équivalents a…

Text truncated - open the document above for the full version.

Schneider Electric (China) Co., Ltd., Shenzhen Branch Address: Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen, China Confirmation Letter We, Schneider Electric (China) Co., Ltd., Shenzhen Branch The product: Z-WAVE+ 15A TR RECEPTACLE FCC ID: 2AUCU-44102Z IC: 25381-44102Z SQR44102LAZ and SQR44102BKZ have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with SQR44102WHZ. The difference lies only model number and color. ______________________ Company Name: Schneider Electric (China) Co., Ltd., Shenzhen Branch Contact Name: Tony Huang Address: Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen Date:12/16/2020

Schneider Electric (China) Co., Ltd., Shenzhen Branch Agent Authorization Company: Schneider Electric (China) Co., Ltd., Shenzhen Branch Address: Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen, China Product Name: Z-WAVE+ 15A TR RECEPTACLE Model Number(s): SQR44102WHZ； SQR44102LAZ； SQR44102BKZ Product Description: Z-WAVE+ 15A TR RECEPTACLE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Dec 1 st , 2020 Name: Tony Huang Title: Manager Company: Schneider Electric (China) Co., Ltd., Shenzhen Branch

Schneider Electric (China) Co., Ltd., Shenzhen Branch Dec 1 st , 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID：2AUCU-44102Z Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description For 180 days pursuant to KDB 726920 D01. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Company Name: Schneider Electric (China) Co., Ltd., Shenzhen Branch Contact Name: Tony Huang Title of Person：Manager E-mail: [email protected] Address: Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen

External photograph

｝ Commercial Reference Color SQR44101WHZWhite SQR44101LAZ SQR44101BKZ LightAlmond Black See the table Commercial Reference: Original format A4 A B C D E F A B C D E F 1 2 34 State: 00 1/1 Document Number: Doc. Rev. Sheet: 1.000 mm Scale: Technical Specification: Units of measure : The information is highly confidential and is the exclusive property of Schneider Electric copyright reserved. This drawing must not be used for any purpose other than that expressly permitted in writing by the owners and must not be disclosed or reproduced in any way without permission from the owners in writing. This drawing must be returned to the owners when the purpose has ceased. Provisional NOTES: *** ARTWORK IS THE MASTER FOR COLOUR, FONT, SIZE & LOGO'S*** 1. TEST FOR MARKINGS: REFER TO CQCS 2. LOCATION OF MARKING: POSITION AS SHOWN 3. FONT: ARIAL ROUNDED 4. TEXT HEIGHT: AS INDICATED 5. SQUARE D LOGO SIZE: 2.73MM(H)*13.79MM(L)(Pantone Cool grey 6C) 6. MINIMUM SIZE: (10 mm) (6 mm) 0.5 inch (12.7mm) 1/2 inch (11mm) 7. MINIMUM SIZE: (Z-WAVE Logo Color: Black) ｝ Controlled E513975 SQR44102BKZ YYYYMMDD 15A 125VAC 125VAC, 60HZResistive: 1875W(15A)Incandescent: 1000WStandard ballast: 1200VAMotor: 1/2 HPLED: 5A Energy Monitoring STRIP GAUGE 1/2 inch IC: 25381-44102ZCAN ICES-003(B)/NMB-003(B)For supply connections,use 12-14 AWG wires rated for at least 90°CFCC ID: 2AUCU-44102Z E513975 Made in China NEUTRAL HOT UL 498B S A Indoor Use Only Z-WAVE S2 PIN Code XXXXX 8. MINIMUM SIZE: (10 mm) (10 mm) FONT SIZE: XXXXX

｝ Commercial Reference Color SQR44101WHZWhite SQR44101LAZ SQR44101BKZ LightAlmond Black See the table Commercial Reference: Original format A4 A B C D E F A B C D E F 1 2 34 State: 00 1/1 Document Number: Doc. Rev. Sheet: 1.000 mm Scale: Technical Specification: Units of measure : The information is highly confidential and is the exclusive property of Schneider Electric copyright reserved. This drawing must not be used for any purpose other than that expressly permitted in writing by the owners and must not be disclosed or reproduced in any way without permission from the owners in writing. This drawing must be returned to the owners when the purpose has ceased. Provisional NOTES: *** ARTWORK IS THE MASTER FOR COLOUR, FONT, SIZE & LOGO'S*** 1. TEST FOR MARKINGS: REFER TO CQCS 2. LOCATION OF MARKING: POSITION AS SHOWN 3. FONT: ARIAL ROUNDED 4. TEXT HEIGHT: AS INDICATED 5. SQUARE D LOGO SIZE: 2.73MM(H)*13.79MM(L)(Pantone Cool grey 6C) 6. MINIMUM SIZE: (10 mm) (6 mm) 0.5 inch (12.7mm) 1/2 inch (11mm) 7. MINIMUM SIZE: (Z-WAVE Logo Color: Black) ｝ Controlled E513975 SQR44102LAZ YYYYMMDD 15A 125VAC 125VAC, 60HZResistive: 1875W(15A)Incandescent: 1000WStandard ballast: 1200VAMotor: 1/2 HPLED: 5A Energy Monitoring STRIP GAUGE 1/2 inch IC: 25381-44102ZCAN ICES-003(B)/NMB-003(B)For supply connections,use 12-14 AWG wires rated for at least 90°CFCC ID: 2AUCU-44102Z E513975 Made in China NEUTRAL HOT UL 498B S A Indoor Use Only Z-WAVE S2 PIN Code XXXXX 8. MINIMUM SIZE: (10 mm) (10 mm) FONT SIZE: XXXXX

｝ Commercial Reference Color SQR44101WHZWhite SQR44101LAZ SQR44101BKZ LightAlmond Black See the table Commercial Reference: Original format A4 A B C D E F A B C D E F 1 2 34 State: 00 1/1 Document Number: Doc. Rev. Sheet: 1.000 mm Scale: Technical Specification: Units of measure : The information is highly confidential and is the exclusive property of Schneider Electric copyright reserved. This drawing must not be used for any purpose other than that expressly permitted in writing by the owners and must not be disclosed or reproduced in any way without permission from the owners in writing. This drawing must be returned to the owners when the purpose has ceased. Provisional NOTES: *** ARTWORK IS THE MASTER FOR COLOUR, FONT, SIZE & LOGO'S*** 1. TEST FOR MARKINGS: REFER TO CQCS 2. LOCATION OF MARKING: POSITION AS SHOWN 3. FONT: ARIAL ROUNDED 4. TEXT HEIGHT: AS INDICATED 5. SQUARE D LOGO SIZE: 2.73MM(H)*13.79MM(L)(Pantone Cool grey 6C) 6. MINIMUM SIZE: (10 mm) (6 mm) 0.5 inch (12.7mm) 1/2 inch (11mm) 7. MINIMUM SIZE: (Z-WAVE Logo Color: Black) ｝ Controlled E513975 SQR44102WHZ YYYYMMDD 15A 125VAC 125VAC, 60HZResistive: 1875W(15A)Incandescent: 1000WStandard ballast: 1200VAMotor: 1/2 HPLED: 5A Energy Monitoring STRIP GAUGE 1/2 inch IC: 25381-44102ZCAN ICES-003(B)/NMB-003(B)For supply connections,use 12-14 AWG wires rated for at least 90°CFCC ID: 2AUCU-44102Z E513975 Made in China NEUTRAL HOT UL 498B S A Indoor Use Only Z-WAVE S2 PIN Code XXXXX 8. MINIMUM SIZE: (10 mm) (10 mm) FONT SIZE: XXXXX

TEST REPORT Applicant : Schneider Electric (China) Co., Ltd., Shenzhen Branch Product Name : Z-WAVE+ 15A TR RECEPTACLE Mode No. : SQR44102WHZ,SQR44102LAZ,SQ R44102BKZ CVC Testing Technology Co., Ltd.（ （（ （Former Vkan Certification &Testing Co., Ltd.） ）） ） 威凯检测技术有限公司 Add.: No.3, Tiantaiyi Road, Kaitai Avenue, Science City, Guangzhou, 510663, P. R. China Telephone: +86-20-32293888 Fax : +86-20-32293889 E-mail: [email protected] Test Report No.: FCC2020-0026-1(XG1) CVC Testing Technology Co., Ltd. CVC Test Report No. FCC2020-0026-1(XG1) Page 2 of 29 LTC-R-7158-Part15B-A0 Applicant Name : Schneider Electric (China) Co., Ltd., Shenzhen Branch Address : Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen, China Manufacturer Name : Schneider Electric (China) Co., Ltd., Shenzhen Branch Address : Room 201, Building A, No. 1 Qianwanyi Road, Shengang Cooperation Zone, Qianhai, Shenzhen, China Equipment under Test Product Name : Z-WAVE+ 15A TR RECEPTACLE Model No. : SQR44102WHZ,SQR44102LAZ,SQR44102BKZ Trade mark : Schneider Electric,Square D Serial no. : — Sampling : — Date of Receipt. 2020.12.01 Date of Testing 2020.12.01~2021.02.02 Test Specification Test Result FCC CFR47 Part 15B (2020) Radio Frequency Devices ANSI C63.4 (2014) PASS Evaluation of Test Result The equipment under test was found to comply with the requirements of the standards applied. Issue Date: 2021.06.17 Tested by: Xu Zhenfei  Name Signature Reviewed by: Liu Yonghai  Name Signature Approved by: Zeng Bo  Name Signature Other Aspects: NONE. Abbreviations:OK, Pass= passed Fail = failed N/A= not applicable EUT= equipment, sample(s) under tested This test report relates only to the EUT, and shall not be reproduced except in full, without written approval of CVC. Note: The test report (No. FCC2020-0026-1) was issued on February 3, 2021. It was modified for the first time on June 17, 2021. The modification contents follow as: Modification of English name of testing institution. The pages involved are: P1~P29; the corresponding revised pages are marked with (XG1) after the original test report number. CVC Testing Technology Co., Ltd. CVC Test Report No. FCC2020-0026-1(XG1) Page 3 of 29 LTC-R-7158-Part15B-A0 TABLE OF CONTENTS 1. GENERAL PRODUCT INFORMATION ................................................................................................... 4 1.1 GENERAL INFORMATION ............................................................................................................................. 4 2. TEST SITES................................................................................................................................................ 5 2.1 TEST FACILITIES......................................................................................................................................... 5 2.2 DESCRIPTION OF NON-STANDARD METHOD AND DEVIATIONS ................................................................. 5 2.3 LIST OF TEST AND MEASUREMENT INSTRUMENTS.................................................................................... 5 3. TEST CONFIGURATION ........................................................................................................................... 6 3.1 TEST MODE ................................................................................................................................................ 6 4. SUMMARY OF MEASUREMENT RESULTS .......................................................................................... 7 5. MEASUREMENT PROCEDURE ............................................................................................................. 8 5.1 CONDUCTED EMISSION .............................................................................................................................. 8 5.2 RADIATED EMISSION ................................................................................................................................ 12 6. TEST SETUP PHOTOGRAPH ................................................................................................................ 21 7. EUT PHOTOGRAPH ................................................................................................................................ 23 8. APPENDIX ................................................................................................................................................ 29 CVC Testing Technology Co., Ltd. CVC Test Report No. FCC2020-0026-1(XG1) Page 4 of 29 LTC-R-7158-Part15B-A0 1. General Product Information The model of this application: SQR44102WHZ,SQR44102LAZ,SQR44102BKZ. SQR44102LAZ and SQR44102BKZ have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with SQR44102WHZ. The difference lies only model number and color. All the tests carried out on model SQR44102WHZ. 1.1 General information Product Name Z-WAVE+ 15A TR RECEPTACLE Model No. SQR44102WHZ,SQR44102LAZ,SQR44102BKZ Power Supply 125 Vac,60Hz FCC ID 2AUCU-44102Z Note： 1. The information of the EUT is declared by the manufacturer. CVC Testing Technology Co., Ltd. CVC Test Report No. FCC2020-0026-1(XG1) Page 5 of 29 LTC-R-7158-Part15B-A0 2. Test Sites 2.1 Test Facilities The tests and measurements refer to this report were performed by EMC testing Lab. of CVC Testing Technology Co., Ltd.（Former Vkan Certification &Testing Co., Ltd.） Add.: No.3, Tiantaiyi Road, Kaitai Avenue, Science City, Guangzhou, 510663, P. R. China Telephone : +86-20-32293888 Fax : +86-20-32293889 Test firm designation number：CN1282 The EMC testing laboratory has been recognized by CNAS, and authorized by Nemko of Norway since 1997, and accredited by DAkkS of Germany since 2007, and assessed and found eligible to participated in the TDAP of VDE testing and certification Institute since 2004, and registered by FCC since 2001. 2.2 Description of Non-standard Method and …

Text truncated - open the document above for the full version.

Test setup photograph-15C (1) Radiated spurious emission Test Setup-1(9KHz~30MHz) (2) Radiated spurious emission Test Setup-2(Below 1GHz) (3) Radiated spurious emission Test Setup-3(Above 1GHz) (4) Conducted Emission Test Setup