2AUTE-FT800Wireless Home Printer

Product Introduc�on 010203 Accessories Front View: Rear View: Opera�on LED Indicator 04 01 02 Power Interface USB Interface Loading Paper Roll Open the top cover Remove the paper roll 01 02 04 03 Push the cover-opening bu�ons on both sides towards the paper outlet to open the top cover. Connec�on LED Indicator Power Bu�on Paper Outlet Cover-opening Bu�on Power Adapter × 1USB Cable × 1 Remove the supplied paper roll and tear it apart along the edge. Loading Paper Roll Load the paper roll Load the paper roll to the paper compartment again and pull some extra paper. Pay a�en�on that the thermosensi�ve layer should face up. Thermosensi�ve layer Close the top cover Close the top cover a�er loading paper. Please make sure both sides click into place. Please purchase and use HPRT official thermal paper. Power On Connect the power supply Plug the power cord into the power interface on the back of the printer. Power On Hold down the power bu�on for 3 seconds to start the printer. To turn off the printer, also hold down the power bu�on for 3 seconds. The power adapter varies by local or region. Tips: All the drawings of product and accessories in the manual are for reference only. Due to the upda�ng and upgrading of the product, there may be some differences between the actual product and the drawings, please refer to the actual product. For more product informa�on, please contact HPRT customer service. Product Name: AI Printer Dimensions: 314 x 159.5 x 92mm Product Model: FT800 Weight: About 1.8kg (excluded accessories) Input Parameter: DC 14V/3A Opera�ng Temperature: Execu�ve Standard: GB4943.1-2011, GB/T9254-2008, GB 17625.1-2012 Wi-Fi Connec�on: Wi-Fi IEEE 802.11b/g/n 2.4GHz 0°C~40°C HPRT AI Printer Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd. Add: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, China Tel: +86-(0)592-5885991 Web: www.hprt.com Product Homepage: �.hprt.com FT800 05 02 01 03 07 01 “Beep-beep beep-” “Beep beep beep-” 02 06 Download App Scan the QR code below to download “H-Print” App. Connect to printer via Wi-Fi Connect the mobile phone to Wi-Fi hotspot (select 2.4 GHz frequency band); Open “H-Print” App, click “+” in the top right corner of Home to add the device; Select FT series according to the guide of App; Enter the Wi-Fi password; Scan the QR code on the bo�om of the printer and wait for the printer to complete Wi-Fi connec�on. Cloud Remote Prin�ng The printer is on and the connected Wi-Fi hotspot can access the Internet; Even when the printer is not around you, you can s�ll choose the file to print via “H-Print” App. A�er entering the print preview, send the data to the printer through remote prin�ng. Prin�ng from Windows PC Connect one side of the USB cable to the PC and the other side to the printer; Turn on the printer; Download the driver program from HPRT website and install it in the PC; Add the printer to the PC and print the documents from PC a�er establishing the connec�on. Prin�ng Wirelessly from Mobile Phone The best opera�ng temperature is 0°C~40°C, if the environmental temperature is too low or too high, the print quality may be affected. Please do not use the unofficial adaptor or paper roll to ensure the print quality. During prin�ng, the area around the thermal print head is very hot. Do not touch it, as you could be burned. Do not pull out the paper by force during prin�ng, or else it may damage the printer. This is a Class A product. In a domes�c environment this product may cause radio interference in which the user may be required to take adequate measures. Precau�ons LED Indicator and Buzzer Defini�ons Opera�on LED indicator, which shows the printer status itself Error Status Printer Status StatusLED IndicatorBuzzer Print head temperature is too high Red LED flashes rapidly Red LED flashes slowly Out of paper Red LED flashes rapidlyCu�er jam RFID error Printer cover is not closed Red LED is ligh�ng Red LED flashes slowly “Beep-beep-beep-” —— —— —— —— StatusLED Indicator Power onWhite LED is ligh�ng Power offLight off White LED flashes slowlyPrin�ng Firmware updateRed, green and blue LED flashes alternately Connec�on LED indicator, which shows the connec�on status of printer StatusLED Indicator In Wi-Fi connec�onWhite LED is ligh�ng White LED flashes rapidly Green LED is ligh�ng Green LED flashes rapidly Light off Wi-Fi data receiving In USB connec�on USB data receiving No connec�on currently FCC WARNING This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on. Any changes or modifica�ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separa�on between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines,…

Text truncated - open the document above for the full version.

Report No.: 2103C008 Page 2 of 31 Report No.: 2103C008 Page 3 of 31 Report No.: 2103C008 Page 4 of 31 Report No.: 2103C008 Page 5 of 31 Report No.: 2103C008 Page 6 of 31 Report No.: 2103C008 Page 7 of 31 Report No.: 2103C008 Page 8 of 31 Report No.: 2103C008 Page 9 of 31

Report No.: 2103C008 Page 10 of 31 Report No.: 2103C008 Page 11 of 31 Report No.: 2103C008 Page 12 of 31

label location

Report No.: 2103C008 Page 13 of 31 WIFI Ant. Report No.: 2103C008 Page 14 of 31 WIFI Ant. Report No.: 2103C008 Page 15 of 31 Report No.: 2103C008 Page 16 of 31 NFC Ant. Report No.: 2103C008 Page 17 of 31 Report No.: 2103C008 Page 18 of 31

Report No.: 2103C008 Page 19 of 31 BT Ant. Report No.: 2103C008 Page 20 of 31 Report No.: 2103C008 Page 21 of 31 Report No.: 2103C008 Page 22 of 31 Report No.: 2103C008 Page 23 of 31

Report No.: 2103C008 Page 24 of 31 Report No.: 2103C008 Page 25 of 31 Report No.: 2103C008 Page 26 of 31 Report No.: 2103C008 Page 27 of 31 Report No.: 2103C008 Page 28 of 31 Report No.: 2103C008 Page 29 of 31 Report No.: 2103C008 Page 30 of 31 Report No.: 2103C008 Page 31 of 31

Report No.: BTL-FCCP-4-2103C008 Page 1 of 36 FCC Radio Test Report FCC ID: 2AUT-FT800 This report concerns: Original Grant Project No. : 2103C008 Equipment : Wireless Home Printer Brand Name : HPRT, iDPRT Test Model : FT800 Series Model : Future800 Applicant : Xiamen Hanin Electronic Technology Co.,Ltd. Address : Room 305A, Angye Building, Pioneering Park,Torch High-tech, Zone, Xiamen Manufacturer : Xiamen Hanin Electronic Technology Co.,Ltd. Address : Room 305A, Angye Building, Pioneering Park,Torch High-tech, Zone, Xiamen Factory : Xiamen Hanin Electronic Technology Co.,Ltd. Address : 96# Rongyuan Road,Tong’an District,Xiamen Date of Receipt : Mar. 04, 2021 Date of Test : May 25, 2021 ~ Jul. 06, 2021 Issued Date : Jul. 06, 2021 Report Version : R00 Test Sample : Engineering Sample No.: DG2021030838 Standard(s) : FCC CFR Title 47, Part 15, Subpart C ANSI C63.10-2013 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Vincent Tan Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-4-2103C008 Page 2 of 36 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-4-2103C008 Page 3 of 36 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 2 . GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF EUT 8 2.2 DESCRIPTION OF TEST MODES 9 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.4 SUPPORT UNITS 10 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 11 3.1 LIMIT 11 3.2 TEST PROCEDURE 11 3.3 DEVIATION FROM TEST STANDARD 11 3.4 TEST SETUP 12 3.5 EUT OPERATING CONDITIONS 12 3.6 TEST RESULTS 12 4 . RADIATED EMISSION TEST 13 4.1 LIMIT 13 4.2 TEST PROCEDURE 14 4.3 DEVIATION FROM TEST STANDARD 14 4.4 TEST SETUP 15 4.5 EUT OPERATING CONDITIONS 16 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 16 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 16 5 . FREQUENCY TOLERANCE TEST 17 5.1 LIMIT 17 5.2 TEST PROCEDURE 17 5.3 DEVIATION FROM STANDARD 17 5.4 TEST SETUP 17 5.5 EUT OPERATION CONDITIONS 17 5.6 TEST RESULTS 17 6 . MEASUREMENT INSTRUMENTS LIST 18 Report No.: BTL-FCCP-4-2103C008 Page 4 of 36 Table of Contents Page 7 . EUT TEST PHOTO 19 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 22 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 25 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 32 APPENDIX D - FREQUENCY TOLERANCE 35 Report No.: BTL-FCCP-4-2103C008 Page 5 of 36 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Jul. 06, 2021 Report No.: BTL-FCCP-4-2103C008 Page 6 of 36 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PA SS ------ 15.225(a)-(d) 15.205(a) 15.209(a) Radiated Emission APPENDIX B APPENDIX C PA SS ------ 15.225(e) Frequency Tolerance APPENDIX D PA SS ------ 15.203 Antenna Requirement ------ PA SS Note(2) Note: (1) “N/A” denotes test is not applicable in this test report (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. Report No.: BTL-FCCP-4-2103C008 Page 7 of 36 1.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China BTL's Test Firm Registration Number for FCC: 357015 BTL's Designation Number for FCC: CN1240 1.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: A. AC power line conducted emissions test: Test Site Method Measurement Frequency Range U, (dB) DG-C02…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2103C008 Page 24 of 59 10. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2103C008 Page 25 of 59 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-2103C008 Page 26 of 59 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: BTL-FCCP-1-2103C008 Page 27 of 59 Radiated Emissions Test Photos Above 1 GHz