2AUTE-HMDL19001Portable Label Printer, Portable Thermal Label Printer

Quick Start Guide Appearance and Components Front Back Ba�ery Inside Platen Cu�er USB Interface Thermal Head Belt Clip Screw Hole Paper Roll Perspec�ve Window [FEED] Bu�on [MODE] Bu�on Power LED Error LED Cover Opening Bu�on LCD Paper Loading 1. Press the cover opening bu�on to open the printer cover. 2. Load the roll paper in the orienta�on shown in the figure below. Thermosensi�ve layer 3. Pull the end of the roll straight toward you. Then press down on both sides of the printer cover to close it firmly. When you close the printer cover, make sure that it is closed on both sides. 4. Use the tear bar to cut the extra paper. Packing List Quick Start Guide Printer USB Cable Roll Paper Ba�ery AC Adapter 1. The items in the package are actually based on the order. 2. The AC adapter varies by country or region. Note HM-T3 PRO Belt Clip Plug in socket with USB charging. When ba�ery pack runs out of power, the ba�ery icon will flash. It powers off automa�cally when con�nues prin�ng. If you want to go on, please charge it. POWER lamp will always flash in green color and goes off when fully charged. Charging the printer when it is on, even if ba�ery icon on the LCD shows fully charged, turn off the printer and let the ba�ery charge un�l the POWER lamp goes off for fully charge. Note Charging via AC Adapter Charging via PC Ba�ery Charging 3. To remove the ba�ery back, pull back the hook, and use the opposite procedure from the one you used to insert the ba�ery pack. Ba�ery Installa�on 1. Make sure that the printer has been turned off before you insert or remove the ba�ery pack. 2. Insert the ba�ery pack into the back of the printer as the figure shown below, following the direc�on of the arrow. Press down on the ba�ery pack un�l the hook click into place. Wi-Fi Se�ngs Note: This se�ng is only available for the models with Wi-Fi. Printer Wi-Fi factory default is Off, and it needs to be turned on through menu before use. In AP mode, the IP address is “192.168.1.1”, SSID is “T3PRO_AP- XXXX” (last four digits of Wi-Fi Mac address). If you need to change the Wi-Fi se�ngs, please set it by the U�lity tool. 2. Press and hold MODE & FEED bu�ons, release the bu�ons a�er you surely confirm the screen display“Enter Menu Mode”, to get a printer into the se�ng mode. 3. Press the MODE bu�on, choose the item or return to previous menu. 4. Press the FEED bu�on, you can move the cursor(“_”) or confirm the new se�ng. Before changing the menu se�ng, please make sure that the communica�on with a host device is disconnected. When the printer is under the Bluetooth communica�on with a host device, it cannot enter the Menu Se�ng mode. Note Menu Se�ngs 1. Press and hold MODE bu�on for approx. 2 seconds, and printer is turned on. LCD display is shown as follows. Label Bluetooth HM-T3 PRO-9FEA Ready Hook FCC WARNING This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on. Any changes or modifica�ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separa�on between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Informa�on and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of �ssue. This Portable Label Printer had been tested against this SAR limit. This device was tested for typical body-worn opera�ons with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separa�on distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not sa�sfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. This equipment complies with ISED radia�on exposure limits set forth for an uncontrolled environment. This equipment could be installedand operated with minimum distance 0 cm between the radiator andyour body. End user must follow the specific opera�ng instruc�onsfor sa�sfying RF exposure compliance. This transmi�er must not be co-located or opera�ng in conjunc�on with any other antenna or transmi�er.

Xiamen Hanin Electronic Technology Co., Ltd. Model difference statement Product Name: Portable Label Printer, Portable Thermal Label Printer Model N o.: HM-T3 Pro, HM-T300 Pro, iMOVE T3Pro, HM-T3 Pro-W, HM-T300 Pro- W, HM-T3 PRO, HM-T3P, T3 PRO, T3P, HM1800, HM1801, HM1802, HM1803, M1804, HM1805, MT1800, MT1801, MT1802, MT1803, MT1804, MT1805 We (Xiamen Hanin Electronic Technology Co., Ltd., Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen) hereby state that all the models are the same circuit and module, except Naming method, resolution are different among different models. Signature: Name: Jeff Wang Title: Certified Engineer Tel: 13799700032 Email: [email protected] Date: 11.30.2022

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Xiamen Hanin Electronic Technology Co., Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Product Name: Portable Label Printer, Portable Thermal Label Printer Model Number: HM-T3 Pro, HM-T300 Pro, iMOVE T3Pro, HM-T3 Pro-W, HM- T300 Pro-W, HM-T3 PRO, HM-T3P, T3 PRO, T3P, HM1800, HM1801, HM1802, HM1803, M1804, HM1805, MT1800, MT1801, MT1802, MT1803, MT1804, MT1805 FCC Identifier: 2AUTE-HMDL19001 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jeff Wang Date: 11/8/2022 Title: Certified Engineer Signature of applicant:

C5266091_X10_Ed.2 1/1 Xiamen Hanin Electronic Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 11/8/2022 Subject: Request for Confidentiality FCC ID: 2AUTE-HMDL19001 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Jeff Wang Title: Certified Engineer

Page 1 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Appendix - Ext Photos Model: HM-T3 Pro Photo 1 Photo 2 Page 2 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 Page 5 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9 ----End of Report----

Label Size：63.5*40.8mm Location

Page 1 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Appendix - Int Photos Model: HM-T3 Pro Photo 1 Photo 2 Page 2 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 Page 5 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9 Photo 10 Page 6 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 11 Photo 12 Bluetooth ANT WIFI ANT Page 7 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 13 Photo 14 Page 8 of 8 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 15 ----End of Report----

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi220914006-01E1 Date of issue: 2022-11-18 Applicant: Xiamen Hanin Electronic Technology Co., Ltd. Product: Portable Label Printer, Portable Thermal Label Printer Model(s): HM-T3 Pro, HM-T300 Pro, iMOVE T3Pro, HM-T3 Pro-W, HM-T300 Pro-W, HM-T3 PRO, HM-T3P, T3 PRO, T3P, HM1800, HM1801, HM1802, HM1803, M1804, HM1805, MT1800, MT1801, MT1802, MT1803, MT1804, MT1805 FCC ID: 2AUTE-HMDL19001 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 33 Report No.: MTi220914006-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 33 Report No.: MTi220914006-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 Statement of Compliance................................................................................................................ 5 2 Test Standards ................................................................................................................................. 6 3 General Description ........................................................................................................................ 7 3.1 Description of the EUT ....................................................................................................................................... 7 3.2 Measurement uncertainty ................................................................................................................................... 8 4 Test Facilities and Accreditations .................................................................................................. 9 4.1 Test laboratory .................................................................................................................................................... 9 5 Equipment List .............................................................................................................................. 10 6 SAR Measurements System Configuration ................................................................................. 11 6.1 SAR Measurement Set-up ............................................................................................................................... 11 6.2 DASY4 E-field Probe System ........................................................................................................................... 13 6.3 Phantoms ......................................................................................................................................................... 14 6.4 Device Holder ................................................................................................................................................... 14 7 SAR Test Procedure ...................................................................................................................... 15 7.1 Scanning Procedure ......................................................................................................................................... 15 7.2 Data Storage and Evaluation ........................................................................................................................... 18 8 Dielectric Property Measurements & System Check .................................................................. 20 8.1 Tissue Dielectric Parameters ............................................................................................................................ 20 8.2 System Check .................................................................................................................................................. 21 9 Ant Location .................................................................................................................................. 23 10 Test data ......................................................................................................................................... 24 11 SAR Measurement Variability ....................................................................................................... 30 12 Simultaneous Transmission analysis .......................................................................................... 31 Photographs of the Test Setup ............................................................................................................ 32 Photographs of the EUT....................................................................................................................... 33 Page 4 of 33 Report No.: MTi220914006-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Xiamen Hanin Electronic Technology Co., Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Manufacturer: Xiame…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi220507005-01E1 Date of issue: 2022-11-30 Applicant: Xiamen Hanin Electronic Technology Co., Ltd. Product: Portable Label Printer, Portable Thermal Label Printer Model(s): HM-T3 Pro, HM-T300 Pro, iMOVE T3Pro, HM-T3 Pro-W, HM-T300 Pro-W, HM-T3 PRO, HM-T3P, T3 PRO, T3P, HM1800, HM1801, HM1802, HM1803, M1804, HM1805, MT1800, MT1801, MT1802, MT1803, MT1804, MT1805 FCC ID: 2AUTE-HMDL19001 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 49 Report No.: MTi220507005-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 49 Report No.: MTi220507005-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Measurement uncertainty ................................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and Accreditations .................................................................................................. 8 3.1 Test laboratory .................................................................................................................................................... 8 4 Equipment List ................................................................................................................................ 9 5 Test Result ..................................................................................................................................... 10 5.1 Antenna requirement ........................................................................................................................................ 10 5.2 AC power line conducted emissions................................................................................................................. 11 5.3 20dB occupied bandwidth ................................................................................................................................ 16 5.4 Conducted peak output power ......................................................................................................................... 20 5.5 Carrier frequency separation ............................................................................................................................ 24 5.6 Average time of occupancy .............................................................................................................................. 26 5.7 Number of hopping channels ........................................................................................................................... 30 5.8 Conducted emissions at the band edge ........................................................................................................... 32 5.9 Conducted spurious emissions ........................................................................................................................ 36 5.10 Radiated spurious emission ........................................................................................................................... 39 Photographs of the Test Setup ............................................................................................................ 48 Photographs of the EUT....................................................................................................................... 49 Page 4 of 49 Report No.: MTi220507005-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Xiamen Hanin Electronic Technology Co., Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Factory: Xiamen Hanin Electronic Technology Co., Ltd. Address: No.96, Rongyuan Road, Tong'an District, Xiamen Product description Product name: Portable Label Printer, Portable Thermal Label Printer Trademark: HPRT, iDPRT Model name: HM-T3 Pro Series Model: HM-T300 Pro, iMOVE T3Pro, HM-T3 Pro-W, HM-T300 Pro-W, HM-T3 PRO, HM-T3P, T3 PRO, T3P, HM1800, HM1801, HM1802, HM1803, M1804, HM1805, MT1…

Text truncated - open the document above for the full version.

ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page1of13 TestingReport CustomerName:XiamenHaninElectronicTechnologyCo.,Ltd. ProductName:PortableLabelPrinter,PortableThermalLabelPrinter SampleModel:HM-T3Pro ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2022.11.29 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page2of13 Version VersionNo.DateDescriptionFormulateApproval A02022.11.29Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................7 3.TestResults......................................................................................................................................8 3.1Teststandard.........................................................................................................................8 3.2Testuncertainty.....................................................................................................................8 3.3Testdata................................................................................................................................9 3.3.1Typicalfreespaceefficiencyandgain......................................................................9 3.3.2Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................13 ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page3of13 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page4of13 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date 16probe microwave chamber 3*3*2.5 RFI-LAB-RF -A00 SUNYIELD2021.3.152023.3.14 Network Analyzer E5071C RFI-LAB-RF -A02 Agilent 2022.5.132023.5.12 1.4Testenvironment Temperature 23.5°C Humidity 59%RH Pressure 100.18kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page5of13 2.SampleInformation 2.1Clientinformation Name XiamenHaninElectronicTechnologyCo.,Ltd. Address Room305A,AngyeBuilding,PioneeringPark, TorchHigh-techZone,Xiamen Contacts / Tel / E-mail / 2.2DescriptionofEUT(S) ProductName PortableLabelPrinter,PortableThermalLabelPrinter SampleModel HM-T3Pro Size / SerialNo. / TestItem Antennagain;Radiationpatternandefficiency FrequencyRange 2400MHz-2500MHz ReceivedDate 2022.11.28 TestDate 2022.11.28 Remark ThelengthoftheRFcableis80mm ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page6of13 2.3EUTappearance Wi-FiAntenna BTAntenna ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page7of13 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202211-KK40 QP030-E11 Page8of13 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile commun…

Text truncated - open the document above for the full version.