2AV7A-HD05Smart Hair Dryer

SERIES Smart Hair Dryer Instruction Manual Manual De Uso Mode D’emploi *Actual product may differ from illustration. 1 EN CONTENTS Important Safety Instructions .............................................. 2 Overview ............................................................................... 6 Accessories ........................................................................... 7 Operation ............................................................................. 8 Maintenance ...................................................................... 12 Specifications ..................................................................... 13 Troubleshooting ................................................................. 13 Warranty ............................................................................. 14 2 EN IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING (THIS MACHINE) Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. KEEP AWAY FROM WATER SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY When using an electrical machine, especially when children are present, basic safety precautions should always be followed, including the following: WARNING – To reduce the risk of fire, electric shock, or injury: 1. The machine is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. 2. Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants. 3. Always “unplug it” immediately after using. 4. Don’t use while bathing. 5. Do not place or store the machine where it can fall or be pulled into a tub or sink. 6. Do not place in or drop into water or any other liquid. 7. If the machine falls into water, “unplug it” immediately. Do not reach into the water. 8. Use this machine only for its intended use as described in this manual. For INDOOR use ONLY. Do not use attachments not recommended by Tineco. Do not use this product for anything other than its intended use, such as drying clothes, etc. 9. Do not use with damaged cord or plug. If machine has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, please contact our Customer Service. 10. The machine should never be left unattended when plugged in. 11. Check that the voltage of the main circuit corresponds with the rating of the machine before operating. Do not use a voltage converter as this may cause an electrical hazard. Do not handle any part of the plug or machine with wet hands. 3 EN 12. Do not handle any part of the plug or machine with wet hands. 13. Do not operate where aerosol (spray) products are being used. Keep the machine away from flammable areas. 14. Never block the air openings of the machine or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like. 15. Do not direct hot air toward eyes or other heat sensitive areas. 16. Remove the plug from the socket when not in use or during a power outage. Do not pull the plug out by the cord when disconnecting from the power socket. Do not use an extension cord with this machine. 17. Do not pull the cord and place heavy items on it. Keep the cord away from heated surfaces. Do not wrap the cord around the machine. If the cord is damaged, stop using the machine immediately and seek advice from Tineco. 18. Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the machine. 19. If the machine not working properly, or if it has been dropped, damaged, or dropped into water, please contact our Customer Service for support. 20. If the machine overheats, it switches off automatically. Unplug the machine and let it cool down for a few minutes. Before you switch the machine on again, check the grilles to make sure they are not blocked by fluff, hair, etc. 21. In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this machine must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility company, or plugged into any socket where the electrical supply is unstable or likely to be turned off. 22. The machine has a reset and test button built into the plug, which should be operated each time the machine is plugged in and used. To test: Press the test button. The reset button will pop out, indicating that the machine is safe to use. To reset: unplug the machine and press the reset button. Plug in again to use your machine. 23. This machine is provided with a protective device (ALCI Machine Leakage Circuit Interrupter) that may make the machine inoperable under some abnormal conditions (such as immersion of the machine). If the machine becomes inoperable, return the machine to a service center for examination and repair. 4 EN 24. Note – If the ALCI trips while in use, the machine should be unplugged. Press the reset button and reinsert the plug into the outlet. If the ALCI immediately trips for a second time, unplug the machine and contact the Tineco Customer Service. 25. Storage – important. When not in use, the machine should be unplugged, allowed to cool and stored in a safe and dry location, out of reach of children. Do not pull the cord or wrap it around the machine. The cord should hang down or lie loose and straight at the entry point into the main body of the machine. 26. Never use while sleeping. 27. The air exit, metal ring, attachments and area shaded in red may be hot during use. Allow them to cool before handling. WARNING THE CONCENTRATOR AND DIFFUSER ACCESSORIES CONTAIN MAGNETS. Keep away from pacemakers, defibrillators, credit cards and electronic storage media. FCC Statement TINECO / MODA ONE S SERIES This appliance complies with part 15 of the FCC Rules. Operation…

Text truncated - open the document above for the full version.

39 FR Accessoires Buse de coiffage Flux d’air précis dirigé vers des zones spécifiques pour coiffer et sécher rapidement les cheveux. Buse de lissage Flux d’air plus doux pour sécher et lisser les cheveux. Diffuseur Il permet de disperser le flux d’air et de sécher vos boucles plus uniformément et délicatement tout en évitant les frisottis. Remarque : • Les buses magnétiques amovibles peuvent être fixées rapidement et facilement à l’avant du produit. La buse peut être tournée sur 360° pour obtenir une position plus précise afin de mieux coiffer vos cheveux. • Fixer et retirer les buses uniquement lorsque le sèche-cheveux est éteint. Ne pas toucher la sortie d’air et les buses pendant l’utilisation pour éviter les brûlures. Après l’utilisation, placer le sèche-cheveux sur une surface résistante à la chaleur jusqu’à ce qu’il refroidisse. Retirer ensuite uniquement les buses. 40 FR Fonctionnement Prise ALCI Pour vérifier que le dispositif de sécurité fonctionne, tester la fonction de sécurité ALCI à chaque fois avant d’utiliser l’appareil. Réinitialiser Test Brancher l’appareil et appuyer sur le bouton « Test ». Le bouton de réinitialisation produira un « clic » et sortira. Si l’appareil est en marche, il cessera de fonctionner. Pour réinitialiser le disjoncteur ALCI, débrancher, appuyer sur le bouton « Réinitialiser » et rebrancher l’appareil. Sélection du mode MARCHE/ ARRÊT COOL MAX/AUTO Le sèche-cheveux démarrera par défaut en mode AUTO. En mode AUTO, la couleur de la boucle de LED changera en fonction de l’humidité détectée et de la distance entre l’appareil et vos cheveux. • Dans le rayon de détection, le capteur peut détecter en continu l’humidité des cheveux et ajuster le flux d’air et la température en conséquence. • L’appareil génère automatiquement des anions pour garder vos cheveux sans électricité statique, brillants et en bonne santé. 41 FR Vous pouvez également sélectionner le mode MAX ou COOL pour répondre au mieux à vos besoins. Appuyez sur le bouton pour accéder au mode MAX, appuyez à nouveau sur ce bouton pour accéder au mode AUTO. Appuyez sur le bouton pour accéder au mode COOL, puis sur le bouton pour revenir en mode MAX. Indicateur Boucle de LED Mode AUTO Sèche-cheveux : changement de chaleur et de débit d’air avec humidité en temps réel (humidité détectée) Soin capillaire : débit d’air et température doux avec génération d’anions (aucune humidité détectée) Au-delà du rayon de détection Remarque : passe à l’état d’économie d’énergie. Mode MAX Débit d’air maximal à chaleur élevée Mode COOL Débit d’air maximal froid Changement de mode Si vous changez de mode, la boucle de LED clignote 3 fois MAX/AUTO COOL MAX/AUTO 42 FR Application • Toutes les fonctions peuvent être activées à l’aide de l’application Tineco. • Téléchargez l’application Tineco depuis l’App Store, Google Play ou le site officiel de Tineco, il est plus facile que jamais de contrôler votre condition capillaire. Tineco Téléchargez sur l'App Store TÉLÉCHARGEZ-LA SUR Google Play iOS 9.0 ou version ultérieure Android 5.0 ou version ultérieure Téléchargements d'applications Support www.tineco.com Téléchargements d'applications Comment connecter ? 1. Lorsque vous connectez le sèche-cheveux à l’application, appuyez longuement sur les boutons MAX/AUTO et COOL en même temps jusqu’à ce que la boucle de LED clignote en bleu. 2. Après la connexion, appuyer sur le bouton MAX/AUTO ou COOL fait passer au mode AUTO. Remarque : • N’appuyez sur aucun bouton quand la connexion est en cours. 43 FR Présentation de la Fonction Application Mode AUTO Permet d’ajuster intelligemment le débit d’air, la chaleur et les anions pour vous offrir une merveilleuse expérience de soins capillaires. Mode Manuel Permet de personnaliser votre MODA ONE. Permet de contrôler facilement la température et le débit d’air. Mode COOL Sélectionnez le débit d’air froid qui correspond le mieux à vos besoins. Mode de style Permet de sécher doucement les boucles et aide à réduire les frisottis. Mode animal domestique Permet de régler votre sèche-cheveux sur une chaleur et un débit d’air moyens pour sécher vos animaux de compagnie. Mode Enfant Séchez les cheveux de votre bébé avec une chaleur et un débit d’air modérés. Journal des soins capillaires Consultez le journal pour surveiller les détails de vos soins capillaires au quotidien. Contactez-nous Vous pouvez contacter le service clientèle à propos de tout problème pendant les heures de travail. Retour d'information Si vous avez des commentaires, n’hésitez pas à nous les envoyer. 44 FR Entretien • Afin de maintenir des performances élevées, nettoyez régulièrement le filtre d’entrée d’air. • Avant de nettoyer, éteignez le sèche-cheveux et débranchez-le de la prise. Pour éviter tout dysfonctionnement, ne lavez pas le filtre. Retirez le couvercle d’entrée d’air en le tournant dans le sens antihoraire. Essuyez délicatement la poussière du filtre et du couvercle de l’entrée d’air avec une brosse douce ou un chiffon sec. Insérez en respectant l’alignement et tournez dans le sens horaire pour fixer le couvercle. 45 FR Spécifications ProduitSÉRIE MODA ONE S Tension120 V à 60 Hz Puissance d’alimentation 1 400 W Guide de Dépannage ProblèmeCause possibleSolution L’appareil ne s’allume pas 1. Pas d’alimentation 2. Le bouton de réinitialisation n’est pas enfoncé 1. Vérifiez et insérez fermement la fiche d’alimentation dans la prise 2. Appuyer sur le bouton de réinitialisation Pendant l’utilisation, la boucle LED clignote en rouge Surchauffe de la machine, protection contre les surtensions, etc. Après le refroidissement, vérifiez et retirez les obstructions de l’entrée / la sortie d’air, puis redémarrez Le cordon d’alimentation ou la fiche devient très chaud Le cordon d’alimentation ou la fiche peut être endommagé Arrêtez d’utiliser l’appareil et contactez le service après-vente Odeur de brûlé se dégageant du sèche- cheveux Les composants internes sont endommagés Les boutons ne réagissent pas Le bouton est endommagé Rema…

Text truncated - open the document above for the full version.

Declaration Letter We Tineco Intelligent Technology Co., Ltd. hereby declare that the product Smart Hair Dryer: HD050100CA, HD050200CA, HD050300CA is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: _____ Yonghua Huang ______ Title: Engineer On behalf of: Tineco Intelligent Technology Co., Ltd. Telephone: +86 512 65653127

Mo an T h ma Mo Th str Tin odel :HD d HD05 hree grou ain struc odel :HD hree mod ructure e neco Inte Mod D05030 50200CA ups of m cture exc D050300 dels are except fo elligent T del Diffe 0US an A，HD05 models a cept for 0US, HD the the or colou Technol erence nd HD0 50100U are the s differen D050200 same in r. ogy Co . Declara 050300C US and H same in nt sales c 0US, HD n electri .,Ltd ation CA, HD0 HD05010 electrica countrie D050100 cal princ 050200 00CA al princi es. 0US ciple, m US ple, ain

Tineco Intelligent Technology Co.,Ltd. 012916 – 09 Authority to Act as Agent Date: _April 28， 2020_ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _____ Intertek Testing Service Shanghai ______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ____2021.4.27____ By: Yonghua Huang_________ (Signature 1 ) (Print name) Title: Engineer_______ On behalf of: _____ Tineco Intelligent Technology Co.,Ltd.________ (Company Name) Telephone: _____+86 512 65653127__________ 1 - If a group “entity” is designated as the authorized agent, the letter of authorization must identify those individuals within the group who are authorized to take action on the application; or alternatively a statement must be provided indicating that as the authorized agent, any individual within the group “entity” is authorized to act on behalf of the applicant / grantee and take action on the application. See https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=33316 . 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Tineco Intelligent Technology Co.,Ltd. Request for Confidentiality Date: April 28, 2020 Subject: Confidentiality Request for: FCC ID：2AV7A-HD05 Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Tineco Intelligent Technology Co.,Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _Yonghua Huang________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Page 1 of 3 External Picture Page 2 of 3 Page 3 of 3 Label

Label Location Label Location

6

6

6

Page 1 of 7 Internal Picture Page 2 of 7 Page 3 of 7 Page 4 of 7 Page 5 of 7 Page 6 of 7 Antenna Location Page 7 of 7

Tineco Intelligent Technology Co., Ltd. SAR COMPLIANCE REPORT Report Type: FCC SAR assessment report Model: HD050100US, HD050100CA, HD050200US, HD050200CA, HD050300US, HD050300CA REPORT NUMBER: 200401031SHA-002 ISSUE DATE: April 26, 2020 DOCUMENT CONTROL NUMBER: TTRFFCCSAR-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCSAR-01_V1© 2018 Intertek Page 2 of 8 Report no.: 200401031SHA-002 Applicant: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China Manufacturer: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China Factory: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China FCC ID: 2AV7A-HD05 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Daniel Zhao Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 200401031SHA-002 Rev. 01 Initial issue of report April 26, 2020 Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Smart Hair Dryer Type/Model: HD050100US, HD050100CA, HD050200US, HD050200CA, HD050300US, HD050300CA Description of EUT: EUT is smart hair dryer with WiFi function, there are six models. HD050100US and HD050100CA, HD050200US and HD050200CA, HD050300US and HD050300CA, three groups of models are the same except for different sales countries. Model HD050100US, HD050200US, HD050300US are the same except for color. We test HD050200US as representative and list the worst results in this report. Rating: 120V, 60Hz, 1400W Category of EUT: Class B EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample received date: April 14, 2020 Date of test: April 15, 2020~ April 24, 2020 1.2 Technical Specification Frequency Band: 2400MHz ~ 2483.5MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n(HT20) Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n(HT20): OFDM (64-QAM, 16-QAM, QPSK, BPSK) Operating Frequency: 2412MHz to 2462MHz for IEEE 802.11b/g/n(HT20) Channel Number: 11 Channels for 802.11b, 802.11g and 802.11n(HT20) Channel Separation: 5 MHz Antenna: PCB Antenna, gain is 2.0dBi Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 6 of 8 2 SAR Assessment Test result: Pass 2.1 SAR Test Exclusion Limit 100 MHz – 6 GHz and ≤ 50 mm Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 7 of 8 100 MHz – 6 GHz and > 50 mm < 100 MHz and < 200 mm Report No.: 200401031SHA-002 TEST REPORT TTRFFCCSAR-01_V1© 2018 Intertek Page 8 of 8 2.2 Assessment Results The highest EIRP adjusted with tune-up tolerance is 6.71dBm = 4.69mW < 10mW (Test Exclusion Thresholds of 2450MHz at 5mm). Therefore, the SAR requirement is deemed to be satisfied without test. ******************************************* END ************************************

Tineco Intelligent Technology Co., Ltd. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: HD050100US, HD050100CA, HD050200US, HD050200CA, HD050300US, HD050300CA REPORT NUMBER: 200401031SHA-001 ISSUE DATE: April 26, 2020 DOCUMENT CONTROL NUMBER: TTRF15.247-03_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-03_V1 © 2018 Intertek Page 2 of 58 Report no.: 200401031SHA-001 Applicant: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China Manufacturer: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China Factory: Tineco Intelligent Technology Co., Ltd. No. 108 Shihu Road West, Wuzhong Zone, Suzhou, 215168 P.R.China FCC ID: 2AV7A-HD05 IC: 26039-HD05 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2019): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (March 2019) Amendment 1: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Daniel Zhao Report No.: 200401031SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 3 of 58 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8 2 TEST SPECIFICATIONS ................................................................................................................................... 9 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 9 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 9 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 10 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 10 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 10 2.6 INSTRUMENT LIST .............................................................................................................................................. 11 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 13 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 14 3.1 LIMIT .............................................................................................................................................................. 14 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 14 3.3 TEST CONFIGURATION ........................................................................................................................................ 14 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ....................................................................................................... 14 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 15 4.1 LIMIT .............................................................................................................................................................. 15 4.2 MEASUREMENT PROCEDURE .................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 200401031SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 51 of 58 9.2 Test Plots 802.11b,2412MHz,Ant0,Plot 1,Reference Level 802.11b,2412MHz,Ant0,Plot 2,Band Edge 802.11b,2412MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2412MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2412MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11b,2437MHz,Ant0,Plot 1,Reference Level 802.11b,2437MHz,Ant0,Plot 2,Band Edge 802.11b,2437MHz,Ant0,Plot 3,30MHz~231 0MHz Report No.: 200401031SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 52 of 58 802.11b,2437MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2437MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11b,2462MHz,Ant0,Plot 1,Reference Level 802.11b,2462MHz,Ant0,Plot 2,Band Edge 802.11b,2462MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2462MHz,Ant0,Plot 4,250…

Text truncated - open the document above for the full version.