2AVCWMWC-9365G NR-U Wireless Bridge

MWC-936 User Manual 1 / 6 MWC -936 User Manual 5G NR-U Wireless Bridge Rev. 1.0 2023-08-08 MWC-936 User Manual 2 / 6  Revision History Date Written by Rev. Description 23.08.08 Sun.Lee 1.0 MWC-936 User manual v1.0 Address: Room 504, 106-40 Gwahakdnji-ro, Gangneung-si, Gangwon-do. 25440 KOREA. http://www.miliwave.co.kr/ Tel. 070-8825-0630 Fax. Email: [email protected] Copyright © Miliwave Inc. 2020. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Miliwave Co., Ltd. All specification supplied herein are subject to change without notice at any time. MWC-936 User Manual 3 / 6 1.Introduction 1.1 Overview The MWC-936 5G NR-U Wireless Bridge uses the 60GHz radio frequency band to form a wireless bridge with a transmission rate of 2Gbps in both directions. It supports IEEE 802.11ad Standard and can use Ch1~Ch4. It has an 1Giga Ethernet LAN port interface. (Circular M12 connector). And there is an RJ45 port for power supply. This port support Passive PoE(Typ 48V), and data communication will be applied in a later update version. For more information, please contact your Miliwave ([email protected]) < Figure 1. MWC-936 > MWC-936 User Manual 4 / 6 1.2 Abbreviations and Acronym Definitions 2.0 Technical Specifications Parameter Description SOC Dual core ARMv8 Cortex-A53 PoE Passive PoE (Typ 48V) Operating Frequency 802.11 ad : CH1, CH2, CH3, CH4 58.32GHz ~ 64.80GHz Transmit Power(max.) 30 dBm @ MCS1 (ANT Beamforming Index 21) Input Voltage Voltage: 48V(typ), Current: 500mA Power Consumption Data Transfer mode: Typical 18W ( at Max. Power ) Operating Temperature -40ºC ~ +85ºC Storage Temperature 10°C～＋40°C Operating Humidity 5%~95% Storage Humidity 5%~95% Volume (L x W x H) 105 x 120 x 50 mm 색상 Black Weight Typical 0.6 kg Input / Output Port Circular M12 Female connector (1Gbps) x1 RJ45 port x1 (This port is used for power. Data communication will be operated in the next version) AcronymDefinition GbpsGiga bits per second GHzGiga Hertz IEEEInstitute of Electrical and Electronics Engineers LEDLight Emitting Diode LoSline-of-sight MbpsMega bits per second MCSModulation and Coding Scheme MHzMega Hertz PTMPPoint-to-multipoint Communication QAMQuadrature amplitude modulation MWC-936 User Manual 5 / 6 3.0 Web UI user guide 3.1 Login 1. Open your web browser, then go to https://192.168.1.1. 2. Enter the device login username and password. The default username and password are as follows: Username: admin Password: admin 1. Your device’s home page (or dashboard) should be displayed. 3.2 Device Overall Status 3.3 Wireless Status MWC-936 User Manual 6 / 6 3.4 Password Change 3.5 IP Network Settings 3.6 Wireless Setting 4.0 Installation It is installed with power supply through Passive PoE (Typ 48V). 5.0 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The device must be installed such that a minimum separation distance of at least 25.15 cm is maintained between the radiator (antenna) and all persons at all times. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3 FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 4 <Port>

FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3 <Antenna>

FCC ID: 2AVCWMWC-936 RF feature(Mode) Separation distance(cm) Max. tune-up EIRP (dBm) Note1 Maximum EIRP (mW) Maximum power density(mW/cm 2 ) Requirement (mW/cm 2 ) 802.11ad 58 320.0 ~ 64 800.0 20.00 30.00 1000.000 0 0.199 0 1.000 ~~~~~~~ ▪ S = - Note = / ( 4 X R 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averaging time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : Method: KDB447498 D01v06 R= Distance to the center of the radiation of the antenna(20cm) Frequency range (MHz) The EUT will only be used with a s eparation of 20 centimeters or greater between the antenna and the body o f the user. The MPE sample calculation for this exposure is shown below. Note1: Please refer to the operat ion description for Max tune-u p power. MPE Calculation Regulation(s): Part 1.1310, Part 2.1091 Part 1.1310▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 1000.000 S= Maximum power density(mW/cm 2 ) 0.1990 EIRP= Equivalen t Isotropic Radiated Power(mW)

FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup photographs EUT Position: X-axis EUT Position: Y-axis EUT Position: Z-axis FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of Radiated Measurement (Below 1GHz) FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz) FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz) FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz) FCC ID: 2AVCWMWC-936 Copyright Ⓒ 2023, Dt&C Co., Ltd. Test Setup Photo of AC Line Conducted Measurement