2AWAA-MS715Thermal Imager

Quick Use Guide of Infrared Thermal Imaging Camera MS715 series Buttons & Interface No. Items Instruction 1 P ower Short press: standby/wake up Long press: Power on or off 2 Menu Sh ort press: switch the image mode Long press: to menu Menu mode: indicates confirmation 3 Laser Short press: turn on or off the laser indicator Long press: turn on/off laser ranging Menu mode: function return 4 Z oom Short press: e-zoom Long press: uniformity correction Menu mode: function and parameter upward selectio n 5 Camer a Short press: capture the picture and exit the recordin g Lon g press: enable the recordin g Menu m ode: function and parameter downward selection 6 Low light lens Providing low light images 7 Lens c ap To protect the lens 8 Las er ranging module las er ranging 9 Las er light indicator Laser indicator 10 Foc us knobs Adjust thermal image 11 E yepiece patch Improve eye comfort and prevent light leakage 12 E yepiece vision ring Adjustable diopter 13 Pu pil distance adjustment module Adjust the distance between eyes 14 In terface External power supply, data transmission, HDMI video output 15 Ba ttery compartments Pow er supply 16 T ripod interface Supports peripheral extension M e m o r y c a p a c i t y S c e n e m o d e P s e u d o c o l o r I m a g e s c h e m a I m a g e m a g n i f i c a t i o n s E x t e r n a l v i d e o o u t p u t W i r e l e s s h o t s p o t L o w p o w e r m o d e B a t t e r y S y s t e m t i m e Location GPS Horiz ontal roll Angle value Pi tch Angle value t a t e Operation Interface figure.1 Menu Interface figure. 2 Menu operation  To enter the menu mode: press and hold the key.  To switch functions and adjust parameters: press Zoom in or camera .  Confirm function: Press Menu key to select the function. Menu Fu nction return : press the laser key d own to exit the menu. Menu instruction Pict ure-in- pic ture: The center area is enlarged 2 times by default. Z oom in is started, the image in the cy cles. WIFI： Android system can go to the official website to download the mobile phone client program "IR- TRA CKER program in the first time "model _ serial number"), successful connection software, click the software "Connect" to see the image, the mobile phone client software can be used to realize the image taking, recording, playba other functions. The WiFi name and password can be customized on the client a fter connection. Note: Turning on WIFI for a long time will increase the power consumption of the device, and shorten the standby time. Please turn off this function when not in use.  Scene function: choose natural modes, which can be used in special scenes such as rainy and foggy days to enhance object ob servation. Fu nction return : press the laser key to r eturn to the upper menu, and hold d own to exit the menu. pic ture: The center area is enlarged 2 times by default. is started, the image in the p icture is enlarged by 2X, 4X, 8X and 16X system can go to the official website to download the mobile phone TRA CKER V". After i nstall and run the mobile phone client time, find the device hotspot "S715_xxxxxxx" (WiFi name is "model _ serial number"), and the initial password is "12345678" successful connection finished, open the mobile phone "IR software, click the software "Connect" to see the image, the mobile phone client software can be used to realize the image taking, recording, playba other functions. The WiFi name and password can be customized on the client Note: Turning on WIFI for a long time will increase the power consumption of shorten the standby time. Please turn off this function when not Scene function: choose natural , enhanced, and bright modes, which can be used in special scenes such as rainy and foggy days to enhance object r eturn to the upper menu, and hold pic ture: The center area is enlarged 2 times by default. When is enlarged by 2X, 4X, 8X and 16X system can go to the official website to download the mobile phone i nstall and run the mobile phone client , find the device hotspot "S715_xxxxxxx" (WiFi name is einitial password is "12345678". When ,open the mobile phone "IR-TRACKER V" software, click the software "Connect" to see the image, the mobile phone client software can be used to realize the image taking, recording, playback, storage and other functions. The WiFi name and password can be customized on the client Note: Turning on WIFI for a long time will increase the power consumption of shorten the standby time. Please turn off this function when not , and bright scene modes, which can be used in special scenes such as rainy and foggy days to enhance object  Hotspot tracking function: When enabled, it can assist to track the highest temperature target.  Cross demarcation setting: When the cursor is turned on, you can select two cursor styles (styles 1, 2), three cursor colors cursor X-axis and Y  Device brightness setting: supports adjustment of the screen brightness of the 5 eyepiece display.  pseudo color label setting: white heat, black heat, iron red, red heat, ocean, desert, forest. Note: The image under the col will automatically switch to the color fusion mode.  Image setting: can set brightness trigger values in natural scene mode.  Low power mode setting: When the low power mode is enabled, only some functions are enabled, for increasing the battery  Auto sleep setting: The optional auto sleep time is 0min, 5min, 30min, and 60min. If no operation is per automatically closed, and the device will increase the battery life of the standby state with low power consumption. Press any key to restore the standby sleep state.  Zoom in: zoom in continuously from 1.0X cking function: When enabled, it can assist to track the highest Cross demarcation setting: When the cursor is turned on, you can select two cursor (styles 1, 2), three cursor colors (red, yellow, and green), and move the and Y-axis. Device brightness setting: supports adjustment of the screen brightness of the 5 color label se…

Text truncated - open the document above for the full version.

ZHEJIANG DALI TECHNOLOGY CO., LTD Date: 2022.12.02 FCC ID: 2AWAA-MS715 Dear Sir/Madam, We, ZHEJIANG DALI TECHNOLOGY CO., LTD Hereby declares the following statement for Federal Communications Commission, All these models are identical in the same PCB, layout and electrical circuit, The only difference is optical lens. Product name: Thermal Imager Model No.: MS715, S715, S715R, S715E, MS715P, MS715E Sincerely, Signature: Name: Shi changbing Company: ZHEJIANG DALI TECHNOLOGY CO., LTD Address: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Phone: 8657186483758 Fax: 8657186483758 E-Mail: [email protected]

ZHEJIANG DALI TECHNOLOGY CO., LTD Date: 2022.12.02 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:__ 2AWAA-MS715___ Product Name:__ Thermal Imager ________ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block Diagram • Operation Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Shi changbing Company: ZHEJIANG DALI TECHNOLOGY CO., LTD Address: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Phone: 8657186483758 Fax: 8657186483758 E-Mail: [email protected]

ZHEJIANG DALI TECHNOLOGY CO., LTD \\192.168.1.251\szctc\06 工程部\02 RF项目部\2022年案件\10月\CTC221019-008 通鉴 S715 FCC ID & RED\1.资料\1.3 申请资料 \Letter\POA_Letter_140225.docx Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022.12.02 SUBJECT: FCC Application for FCC ID: 2AWAA-MS715 To Whom It May Concern: We, the undersigned, hereby authorize _ Titto Zhao _ at _CTC Laboratories, Inc. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by _ Titto Zhao _ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature: Name: Shi changbing Company: ZHEJIANG DALI TECHNOLOGY CO., LTD Address: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Phone: 8657186483758 Fax: 8657186483758 E-Mail: [email protected]

ZHEJIANG DALI TECHNOLOGY CO., LTD Date: 2022.12.02 FCC ID: 2AWAA-MS715 Dear Sir/Madam, We, ZHEJIANG DALI TECHNOLOGY CO., LTDHereby declares the Product name: Thermal Imager, Model no.: MS715, S715, S715R, S715E, MS715P, MS715E, Have done SDOC certification. Sincerely, Signature: Name: Shi changbing Company: ZHEJIANG DALI TECHNOLOGY CO., LTD Address: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Phone: 8657186483758 Fax: 8657186483758 E-Mail: [email protected]

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Page 1 of 4 External Photographs Page 2 of 4 Page 3 of 4 Page 4 of 4

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Page 1 of 1 Label Label Location 1.

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Page 1 of 14 Internal Photographs Page 2 of 14 Page 3 of 14 Page 4 of 14 Page 5 of 14 Page 6 of 14 WIFI Antenna Page 7 of 14 Page 8 of 14 Page 9 of 14 Page 10 of 14 Page 11 of 14 Page 12 of 14 Page 13 of 14 Page 14 of 14

Page 1 of 54 Report No.: S22111801301001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Thermal Imager Trademark： N/A Model Name： MS715 Family Model： S715, S715R, S715E, MS715P, MS715E Report No.： S22111801301001 FCC ID： 2AWAA-MS715 Prepared for ZHEJIANG DALI TECHNOLOGY CO.,LTD NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 54 Report No.: S22111801301001 TEST RESULT CERTIFICATION Applicant’s name ................. : ZHEJIANG DALI TECHNOLOGY CO.,LTD Address .................................. : NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Manufacturer's Name ........... : ZHEJIANG DALI TECHNOLOGY CO.,LTD Address .................................. : NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Product description Product name ......................... : Thermal Imager Trademark ............................ : N/A Model Name ......................... : MS715 Family Model .......................... : S715, S715R, S715E, MS715P, MS715E Standards .............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number .............................. S221118013002 Date of Test Date (s) of performance of tests ............. : Nov. 30, 2022 Date of Issue........................................... : Nov. 30, 2022 Test Result .............................................. : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 54 Report No.: S22111801301001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Nov. 30, 2022 Jacob Chen Page 4 of 54 Report No.: S22111801301001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 8 1.5. Ambient Condition ................................................................................... 8 2. SAR Measurement System ................................................................................... 9 2.1. SATIMO SAR Measurement Set-up Diagram ............................................ 9 2.2. Robot ..................................................................................................... 10 2.3. E-Field Probe .......................................................................................... 11 2.3.1. E-Field Probe Calibration ................................................................. 11 2.4. SAM phantoms ...................................................................................... 12 2.4.1. Technical Data .................................................................................. 13 2.5. Device Holder ........................................................................................ 14 2.6. Test Equipment List ................................................................................ 15 3. SAR Measurement Procedures .......................................................................... 17 3.1. Power Reference ................................................................................... 17 3.2. Area scan & Zoom scan .......................................................................... 17 3.3. Description of interpolation/extrapolation scheme .............................. 19 3.4. Volumetric Scan ..................................................................................... 19 3.5. Power Drift ............................................................................................ 19 4. System Verification Procedure .......................................................................... 20 4.1. Tissue Verification ................................................................................. 20 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 21 4.2. System Verification Procedure .............................................................. 22 4.2.1. System Verification Results .............................................................. 23 5. SAR Measurement variability and uncertainty .................................................. 24 5.1. SAR measurement variability ................................................................. 24 5.2. SAR measurement uncertainty .............................................................. 24 6. RF Exposure Positions .....................................................…

Text truncated - open the document above for the full version.

CTC Laboratories, Inc. $CNAS$ 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn TEST REPORT Report No. ··························: CTC20221950E02 FCC ID································: 2AWAA-MS715 Applicant····························: ZHEJIANG DALI TECHNOLOGY CO., LTD Address·······························: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Manufacturer························: ZHEJIANG DALI TECHNOLOGY CO., LTD Address·······························: NO639 Binkang Road, Hangzhou, P.R.CHINA 310053 Product Name······················: Thermal Imager Trade Mark···························: / Model/Type reference·············: MS715 Listed Model(s) ····················: S715, S715R, S715E, MS715P, MS715E Standard·····························: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of receipt of test sample...: Oct. 20, 2022 Date of testing.......................: Oct. 21, 2022 ~ Nov. 17, 2022 Date of issue.........................: Nov. 18, 2022 Result.................................: PASS Compiled by: (Printed name+signature) Terry Su Supervised by: (Printed name+signature) Eric Zhang Approved by: (Printed name+signature) Totti Zhao Testing Laboratory Name......: CTC Laboratories, Inc. Address...............................: 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CTC. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CTC within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. The test report merely correspond to the test sample. Page 2 of 80 Report No.: CTC20221950E02 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cnca.cn Table of Contents Page 1. TEST SUMMARY ............................................................................................................................................ 3 1.1. T EST STANDARDS ................................................................................................................................................. 3 1.2. R EPORT VERSION ................................................................................................................................................. 3 1.3. T EST DESCRIPTION ............................................................................................................................................... 4 1.4. T EST FACILITY ...................................................................................................................................................... 5 1.5. M EASUREMENT UNCERTAINTY ............................................................................................................................... 5 1.6. E NVIRONMENTAL CONDITIONS ............................................................................................................................... 6 2. GENERAL INFORMATION ............................................................................................................................... 7 2.1. C LIENT INFORMATION ........................................................................................................................................... 7 2.2. G ENERAL DESCRIPTION OF EUT ............................................................................................................................. 7 2.3. A CCESSORY EQUIPMENT INFORMATION .................................................................................................................... 8 2.4. O PERATION STATE ................................................................................................................................................ 9 2.5. M EASUREMENT INSTRUMENTS LIST ...................................................................................................................... 10 3. TEST ITEM AND RESULTS .............................................................................................................................. 12 3.1. C ONDUCTED EMISSION ....................................................................................................................................... 12 3.2. R ADIATED EMISSION ........................................................................................................................................... 15 3.3. B AND EDGE EMISSIONS (RADIATED) ...................................................................................................................... 37 3.4. B AND EDGE AND SPURIOUS EMISSIONS (CONDUCTED) ............................................................................................. 50 3.5. DTS BANDWIDTH .............................................................................................................................................. 64 3.6. M AXIMUM CONDUCTED OUTPUT POWER .............................................................................................................. 69 3.7. P OWER SPECTRAL DENSITY .................................................................................................................................. 71 3.8. D UTY CYCLE ................................................................................…

Text truncated - open the document above for the full version.

Revision: S-1 Page 1 of 8 产 品 承 认 书 （SPECIFICATION） 日期/DATE：2020/08/04 编号/NUMBER：198438-1 版本/VERSION：A1 CUSTOMER: Hangzhou Sunsky IOT Technology Co,Ltd Address: China 5G Park, Room 415, Wenyixi Road, Yuhang District , Hangzhou City, Zhejiang Provice, China 客户料号 CUSTOMER P/N: 公司编号： PART MODEL: HZ8438DL 产品名称： PRODUCTNAME : PCB Antenna APPROVAL OF SUPPLIER 编制 DEAWN BY 审核 CHECKED BY 核准 APPROVED BY 黄浩 林国富 肖大田 客户承认 APPROVE BY CUSTOMER Revision: S-1 Page 2 of 8 变更履历 NO 版本 变更日期 变更内容概述 变更原因 1 A1 2020.08.04 首次发行 --------- Revision: S-1 Page 3 of 8 1.0 PART NUMBER; Sunsky Part number Frequency Band HH Part Number HZ8438DL 2.4GHZ-2.5GHZ 2.0ANTENNA TEST 电性能指标 Electrical Specifications 频率范围 Frequency Range (MHz) 2400--2500 频带宽度 Bandwidth (MHz) 100 输入阻抗 Input Impendence (Ω) 50 电压驻波比 V.S.W.R ≤ 2.0 连接器型号Connect Type 一代IPEX Revision: S-1 Page 4 of 8 Freq Effi Gain (MHz) (%) (dBi) 2400 48.16 2.12 2410 47.6 2.48 2420 50.69 2.31 2430 47.09 2.32 2440 50.33 2.43 2450 53.4 2.57 2460 53.03 2.43 2470 51.49 2.3 2480 47.89 1.93 2490 55.76 2.6 2500 50.58 2.16 Revision: S-1 Page 5 of 8 Revision: S-1 Page 6 of 8 Revision: S-1 Page 7 of 8 3.0 ENVIRONMENTAL SPECIFICATIONS 3.1 TEMPERATURE Operating Temperature Range: -40C～ +85C Storage Temperature Range: -40C～ +120C 3.2 SALT SPRAY TEST Antenna be exposed in a 35°C, 5% salt fog chamber for 24 hours then check the appearance and performance against the specifications in normal temperature. 3.3 STATIC HUMIDITY TEST The antenna is subjected to the following test: Temperatures: +70°C and 90%--95%RH Test Duration: 24 Hours The antenna should not undergo any structural or functional change and remain within the electrical/mechanical specification. 4.0 PACKAGING The antennas will be packed in bags, There are 100or 200 antennas per bag. The bags are packed in corrugated fibreboard over box. 天线图纸 Revision: S-1 Page 8 of 8 同轴线图纸

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Page 1 of 2 Radiated Measurements 30MHz - 1GHz Above1GHz Page 2 of 2 Conducted Emissions

Test Positions Front Side (Separation distance of 0mm) Back Side (Separation distance of 0mm) Left Side (Separation distance of 0mm) Right Side (Separation distance of 0mm) Top Side (Separation distance of 0mm) Bottom Side (Separation distance of 0mm) END