2AWHY-Y0910WUUK Wired Cam Pro v2

<

WUUK LABS CORP. 16192 COASTAL HWY LEWES Delaware United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-10-4 U.S. Agent Designation WUUK LABS CORP. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AWHY-Y0910): Name and company of U.S. agent: WUUK LABS CORP. Physical U.S. address of agent: 16192 COASTAL HWY LEWES Delaware United States FRN of U.S. agent: 0029606514 Email address of U.S. agent: [email protected] WUUK LABS CORP. acknowledges their obligation to accept service of process on behalf of WUUK LABS CORP.. WUUK LABS CORP. with the FRN [0029606514] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Yang xie Manager WUUK LABS CORP. Signature Yang xie Manager WUUK LABS CORP. 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Sincerely, Name/Title： Yang xie/Manager Company: WUUK LABS CORP. Address: 16192 COASTAL HWY LEWES Delaware United States Phone: 6282808975 Fax: 6282808975 E-Mail: [email protected]

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7 Fig.8

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7 WiFi antenna

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 5 Maximum Permissible Exposure Report Product Information EUT : WUUK Wired Cam Pro v2 Model Number : Y0910 Model Declaration : N/A Test Model : Y0910 Power Supply : DC 5V by adapter Hardware version : BX-Y0910-MAIN_V1.0 Software version : V1.0 Sample ID : TZ230904838–1# TZ230904838–2# WiFi WLAN : Supported IEEE 802.11b/g/n WLAN Operation Frequency : IEEE 802.11b:2412-2462MHz IEEE 802.11g:2412-2462MHz IEEE 802.11n HT20:2412-2462MHz IEEE 802.11n HT40:2422-2452MHz WLAN Channel Number : 11 Channels for 2412-2462MHz(IEEE 802.11b/g/n HT20) 7 Channels for 2422-2452MHz(IEEE 802.11n HT40) WLAN Modulation Technology : IEEE 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Type And Gain : Internal Antenna 3.45 dBi(Max.) Note 1: Antenna position refer to EUT Photos. Note 2: the above information was supplied by the applicant. 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 5 3. Limit 3. 1 Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information This Product can only use antennas certificated as follows provided by manufacturer; Antenna Gain and type refer to Product information Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 5 6. Conducted Power WiFi 2.4GHz Band TestMode Antenna Channel Result[dBm] 11B Ant1 2412 13.15 2437 13.20 2462 13.01 11G Ant1 2412 13.40 2437 13.79 2462 12.93 11N20SISO Ant1 2412 11.54 2437 11.55 2462 11.07 11N40SISO Ant1 2422 12.57 2437 12.42 2452 11.50 7. Manufacturing Tolerance WiFi 2.4GHz Band – Antenna 1 IEEE 802.11b(Average) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 12.5 12.5 12.5 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11g (Average) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 13.0 13.5 12.5 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 11.0 11.0 10.5 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) Channel Channel 3 Channel 6 Channel 9 Target (dBm) 12.0 12.0 11.0 Tolerance ±(dB) 1.0 1.0 1.0 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 5 8. Measurement Results 8.1 Standalone MPE As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum E…

Text truncated - open the document above for the full version.

SPECIFICATION SShenzhen Tianda Communication Co., Ltd ShenZhen TianDa Communication CO., LTD Y0910 antenna Product Acknowledgement Customers WUUK Frequency band 2400-2500MHz Project name Y0910 Version A Project part number WK-Y9-10-WI-A 02.06.0030 Color / R F design Huang Zhilin Structural design Zhou Luhong Day 2023.07.31 Customer acknowledges: Whether the assembly meets your requirements: □ OK □NG Shenzhen Tianda Communication Co., Ltd ShenZhen TianDa Communication CO., LTD. 302, Building A, Jingang Science and Technology Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen 302 Building A, JinGang science and Technology Park, Qiaotou community, Fuhai Street, Bao'an District, Shenzhen Contents First, WIFI antenna............ 3 1. Specifications............ 3 1.1. Electrical specifications............ 3 1.1.1 Electrical performance indicators........................ 3 1.1.2 Matching circuit diagram........................ 3 1.2 Testing.................. 4 1.2.1 Passive test data........................ 4 1.2.1.1, antenna standing wave diagram........................ 4 1.2.1.2 Antenna gain, efficiency........................ 5 1.2.1.3 Antenna pattern.................. 6 1.2.2、The active test data of the whole machine........................ 8 II. Structural Specifications............ 9 2.1 Antenna composition............ 9 2. 2. Engineering drawings........................ 9 III. Conclusion............ 9 IV. Packaging.................. 9 1. WIFI antenna 1. Specifications The acknowledgment mainly provides the test status of the electrical and structural performance parameters of the WIFI antenna of the Y0910 project. The picture below is a picture of Investec's design of the WIFI antenna. 1.1、Electrical specifications 1.1.1. Electrical performance indicators The working frequency band of the antenna of the project is 2400-2500MHz, and the following are the electrical performance indicators of the antenna designed and trial- produced by Investec. WIFI Band Frequency (MHz). VSWR WIFI 2400~2500 ≤2.0 1.1.2. Matching circuit diagram The matching circuit of the WIFI antenna is a parallel 5.6nH inductor and a series 0.75pF capacitor from the antenna end. 1.2、Test 1.2.1、Passive test 1.2.1.1, Antenna standing wave test (VSWR). 1.2.1.2, antenna gain, efficiency Passive Test For WiFi Antenna(2.4G) Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 2400 51.18 -2.91 3.27 2410 51.47 -2.88 3.1 2420 54.53 -2.63 3.14 2430 51.32 -2.9 2.93 2440 58.54 -2.33 3.2 2450 59.72 -2.24 3.45 2460 60.62 -2.17 3.29 2470 64.18 -1.93 3.34 2480 61.06 -2.14 3.24 2490 66.84 -1.75 3.09 2500 64.32 -1.92 3.04 1.2.1.3. Antenna pattern Radiation Pattern For WiFi Antenna(2400MHz) Radiation Pattern For WiFi Antenna(2450MHz) Radiation Pattern For WiFi Antenna(2500MHz) 1.2.2、The whole machine has active test data Above is the active test data of the WIFI antenna of the whole machine. 2. Structural specifications 2.1. Antenna composition WIFI antennas are mainly composed of white copper. 2.2. Engineering drawings III. Conclusion This antenna is designed on the prototype currently provided by the customer, the electrical parameters and structural dimensions have met the technical requirements, please confirm! 4. Packaging Packed in a plastic box.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 1 of 38 Appendix Test Data for WLAN(2.4G) (Conducted Measurement) Product Name: WUUK Wired Cam Pro v2 Trade Mark: WUUK Test Model: Y0910 FCC ID: 2AWHY-Y0910 Environmental Conditions Temperature: 24.6°C Relative Humidity: 56% ATM Pressure: 100.0 kPa Test Engineer: Anna Hu Supervised by: Hugo Chen NOTE N/A Appendix A: DTS Bandwidth Test Result TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 10.080 2406.960 2417.040 0.5 PASS 2437 10.040 2431.960 2442.000 0.5 PASS 2462 10.040 2457.000 2467.040 0.5 PASS 11G Ant1 2412 16.280 2403.880 2420.160 0.5 PASS 2437 15.920 2428.840 2444.760 0.5 PASS 2462 15.400 2454.480 2469.880 0.5 PASS 11N20SISO Ant1 2412 16.880 2403.840 2420.720 0.5 PASS 2437 15.680 2428.880 2444.560 0.5 PASS 2462 16.520 2454.240 2470.760 0.5 PASS 11N40SISO Ant1 2422 35.120 2404.480 2439.600 0.5 PASS 2437 35.360 2419.160 2454.520 0.5 PASS 2452 35.760 2433.840 2469.600 0.5 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 2 of 38 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 3 of 38 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 4 of 38 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 5 of 38 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 6 of 38 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Channel OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 14.854 2404.6433 2419.4973 --- --- 2437 14.672 2429.5779 2444.2499 --- --- 2462 14.773 2454.7186 2469.4916 --- --- 11G Ant1 2412 16.736 2403.6777 2420.4137 --- --- 2437 16.669 2428.6363 2445.3053 --- --- 2462 16.726 2453.7325 2470.4585 --- --- 11N20SISO Ant1 2412 17.803 2403.1611 2420.9641 --- --- 2437 17.737 2428.1195 2445.8565 --- --- 2462 17.759 2453.1499 2470.9089 --- --- 11N40SISO Ant1 2422 36.254 2403.9766 2440.2306 --- --- 2437 36.154 2419.0028 2455.1568 --- --- 2452 36.216 2433.9110 2470.1270 --- --- Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 7 of 38 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 8 of 38 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 9 of 38 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 10 of 38 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 11 of 38 Appendix C: Maximum conducted output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict 11B Ant1 2412 13.15 ≤30.00 PASS 2437 13.20 ≤30.00 PASS 2462 13.01 ≤30.00 PASS 11G Ant1 2412 13.40 ≤30.00 PASS 2437 13.79 ≤30.00 PASS 2462 12.93 ≤30.00 PASS 11N20SISO Ant1 2412 11.54 ≤30.00 PASS 2437 11.55 ≤30.00 PASS 2462 11.07 ≤30.00 PASS 11N40SISO Ant1 2422 12.57 ≤30.00 PASS 2437 12.42 ≤30.00 PASS 2452 11.50 ≤30.00 PASS Note：The Duty Cycle Factor is compensated in the test result. Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 12 of 38 Appendix D: Maximum power spectral density Test Result TestMode Antenna Channel Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -16.97 ≤8.00 PASS 2437 -17.08 ≤8.00 PASS 2462 -17.38 ≤8.00 PASS 11G Ant1 2412 -16.7 ≤8.00 PASS 2437 -16.04 ≤8.00 PASS 2462 -17.43 ≤8.00 PASS 11N20SISO Ant1 2412 -14.63 ≤8.00 PASS 2437 -13.47 ≤8.00 PASS 2462 -15.48 ≤8.00 PASS 11N40SISO Ant1 2422 -17 ≤8.00 PASS 2437 -16.83 ≤8.00 PASS 2452 -17.36 ≤8.00 PASS Note：The Duty Cycle Factor is compensated in the test result. Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 13 of 38 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 14 of 38 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 15 of 38 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 16 of 38 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 17 of 38 Appendix E: Band edge measurements Test Result TestMode Antenna ChName Channel RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 3.60 -40.8 ≤-26.4 PASS High 2462 3.48 -48.51 ≤-26.52 PASS 11G Ant1 Low 2412 2.48 -36.39 ≤-27.52 PASS High 2462 2.19 -48.27 ≤-27.81 PASS 11N20SISO Ant1 Low 2412 0.20 -38.16 ≤-29.8 PASS High 2462 -0.41 -48.27 ≤-30.41 PASS 11N40SISO Ant1 Low 2422 -1.84 -41.76 ≤-31.84 PASS High 2452 -3.29 -47.12 ≤-33.29 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 18 of 38 Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 11G_Ant1_High_2462 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 19 of 38 11N20SISO_Ant1_Low_2412 11N20SISO_Ant1_High_2462 11N40SISO_Ant1_Low_2422 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 20 of 38 11N40SISO_Ant1_High_2452 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 Report No.: TZ230904838-E Page 21 of 38 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Channel FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 2.89 2.89 --…

Text truncated - open the document above for the full version.

Report No.: TZ230904838-E Page 1 of 40 FCC TEST REPORT Test report On Behalf of WUUK LABS CORP. For WUUK Wired Cam Pro v2 Model No.: Y0910 FCC ID: 2AWHY-Y0910 Prepared for : WUUK LABS CORP. 16192 COASTAL HWY, LEWES, DE 19958, US Prepared By : Shenzhen Tongzhou Testing Co.,Ltd 1th Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Date of Test: Sep.7, 2023 ~ Sep.21, 2023 Date of Report: Sep.22, 2023 Report Number: TZ230904838-E The test report apply only to the specific sample(s) tested under stated test conditions It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: TZ230904838-E Page 2 of 40 TEST RESULT CERTIFICATION Applicant’s name ................. : WUUK LABS CORP. Address .................................. : 16192 COASTAL HWY, LEWES, DE 19958, US Manufacture's Name ............ : WUUK LABS CORP. Address .................................. : 16192 COASTAL HWY, LEWES, DE 19958, US Product description Trade Mark: WUUK Product name ............................ : WUUK Wired Cam Pro v2 Model and/or type reference : Y0910 Standards.............................. : FCC Rules and Regulations Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : Sep.7, 2023 ~ Sep.21, 2023 Date of Issue .......................................... : Sep.22, 2023 Test Result .............................................. : Pass Testing Engineer : (Anna Hu) Technical Manager : (Hugo Chen) Authorized Signatory : (Andy Zhang) Report No.: TZ230904838-E Page 3 of 40 Revision History Revision Issue Date Revisions Revised By 00 Sep.22, 2023 Initial Issue Andy Zhang Report No.: TZ230904838-E Page 4 of 40 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 5 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................ 5 1.4. DESCRIPTION OF TEST FACILITY ........................................................................................................................ 6 1.5. STATEMENT OF THE MEASUREMENT UNCERTAINTY .......................................................................................... 7 1.6. MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 1.7. DESCRIPTION OF TEST MODES .......................................................................................................................... 8 2. TEST METHODOLOGY ......................................................................................................................................... 9 2.1. EUT CONFIGURATION......................................................................................................................................... 9 2.2. EUT EXERCISE ................................................................................................................................................... 9 2.3. GENERAL TEST PROCEDURES ........................................................................................................................... 9 2.4. TEST SAMPLE ...................................................................................................................................................... 9 3. SYSTEM TEST CONFIGURATION .................................................................................................................... 10 3.1. JUSTIFICATION................................................................................................................................................... 10 3.2. EUT EXERCISE SOFTWARE .............................................................................................................................. 10 3.3. SPECIAL ACCESSORIES .................................................................................................................................... 10 3.4. BLOCK DIAGRAM/SCHEMATICS......................................................................................................................... 10 3.5. EQUIPMENT MODIFICATIONS ............................................................................................................................ 10 3.6. TEST SETUP ...................................................................................................................................................... 10 4. SUMMARY OF TEST RESULTS ........................................................................................................................ 11 5. TEST RESULT ....................................................................................................................................................... 12 5.1. ON TIME AND DUTY CYCLE .............................................................................................................................. 12 5.2. MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT ............................................................................... 13 5.3. POWER SPECTRAL DENSITY MEASUREMENT .................................................................................................. 15 5.4. 6 DB SPECTRUM BANDWIDTH MEASUREMENT ................................................................................................ 17 5.5. RADIAT…

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 2 TEST SETUP PHOTOS OF THE EUT Conducted Emission Radiated Emission Below 1GHz Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2AWHY-Y0910 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 2 Radiated Emission Above 1GHz