2AXUI-102S4G TABLET PC

CHITECH SHENZHEN TECHNOLOGY CO.,LTD

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Nov 23, 2020
Application Purpose: Original Equipment
Date of Application: Nov 23, 2020
Equipment Note: 4G TABLET PC
Frequency Range: 2402.00000000 - 2480.00000000
Company: CHITECH SHENZHEN TECHNOLOGY CO.,LTD
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

10.1 Model:102S 10.1 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use on the body, as described in this user guide, is 1.205W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AXUI-102S Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Cover Letter(s)

CHITECH SHENZHEN TECHNOLOGY CO.,LTD Agent Authorization Company: CHITECH SHENZHEN TECHNOLOGY CO.,LTD Address: Chitech industrial Park,NO.48,Xiashijia Road, Gongming Town,Guangming Dist.,Shenzhen,China Product Name: 4G TABLET PC Model Number(s): 102S Product Description: 4G TABLET PC We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-11-18 Name: Lydia Deng Title: manager Company: CHITECH SHENZHEN TECHNOLOGY CO.,LTD

Cover Letter(s)

CHITECH SHENZHEN TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-11-18 Subject; Request for Confidentiality FCC ID: 2AXUI-102S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lydia Deng Title: Manager

External Photos

ID Label/Location Info

label location label location

Internal Photos

Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 43 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 44 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 45 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 46 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 47 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 48 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 49 of 50 Report No: JYTSZE201002501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Page 50 of 50 ------End of report------

RF Exposure Info

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZE201002601V01 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: CHITECH SHENZHEN TECHNOLOGY CO., LTD Address of Applicant: Chitech industrial Park,NO.48,Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen, China Equipment Under Test (EUT) Product Name: 4G TABLET PC Model No.: 102S Trade mark hatch FCC ID: 2AXUI-102S Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 30 Oct., 2020 ~ 16 Nov., 2020 Test Result: Maximum Reported 1-g SAR (W/kg) Body: 1.205 Report No: JYTSZE201002601V01 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE201002601 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 2 of 148 2 Version Version No. Date Description 00 18 Nov., 2020 Original 01 23 Nov., 2020 Page 6, Page24, Page 25 delete the corresponding useless description, Page 48 antenna has been changed Prepared by: Date: 23 Nov., 2020 Report Clerk Reviewed by: Date: 23 Nov., 2020 Project Engineer Report No: JYTSZE201002601V01 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE201002601 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366, E-mail: [email protected] Page 3 of 148 3 Contents 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ................................................................................................................................. 5 5 GENERAL INFORMATION .................................................................................................................................. 6 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 6 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 6 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 7 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 8 5.5 TEST SAMPLE PLAN ....................................................................................................................................................................... 8 5.6 TEST LOCATION ............................................................................................................................................................................. 8 6 INTRODUCTION ................................................................................................................................................... 9 6.1 INTRODUCTION ............................................................................................................................................................................... 9 6.2 SAR DEFINITION ............................................................................................................................................................................ 9 7 RF EXPOSURE LIMITS ..................................................................................................................................... 10 7.1 UNCONTROLLED ENVIRONMENT ................................................................................................................................................... 10 7.2 CONTROLLED ENVIRONMENT ....................................................................................................................................................... 10 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................. 10 8 SAR MEASUREMENT SYSTEM ....................................................................................................................... 11 8.1 E-FIELD PROBE...........................................................................................................................…

Text truncated - open the document above for the full version.

Test Report

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZE201002503 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certif ication mark. The manuf acturer should ensure that all products in series production are in conf ormity w ith the product sample detailed in this report. This report may only be reproduced and distributed in f ull. If the product in this report is used in any conf iguration other than that detailed in the report, the manuf acturer must ensure the new system complies w ith all relevant standards. This document cannot be reproduced except in f ull, w ithout prior w ritten approval of the Company. Any unauthorized alteration, f orgery or f alsif ication of the content or appearance of this document is unlaw ful and off enders may be prosecuted to the f ullest extent of the law . Unless otherw ise stated the results show n in this test report ref er only to the sample(s) tested and such sample(s) are retained f or 90 days only. 1 Cover Page FCC REPORT (Bluetooth) Applicant: CHITECH SHENZHEN TECHNOLOGY CO., LTD Address of Applicant: Chitech industrial Park,NO.48,Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen, China Equipment Under Test (EUT) Product Name: 4G TABLET PC Model No.: 102S Trade mark: hatch FCC ID: 2AXUI-102S Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 13 Oct., 2020 Date of Test: 14 Oct., to 03 Nov., 2020 Date of report issued: 04 Nov., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: JYTSZE201002503 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 84 2 Version Version No. Date Description 00 04 Nov., 2020 Original Tested by: Date: 04 Nov., 2020 Test Engineer Reviewed by: Date: 04 Nov., 2020 Project Engineer Report No: JYTSZE201002503 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 84 3 Contents Page 1 COV ER PAGE ........................................................................................................................................................................................ 1 2 VERSION.................................................................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................................................. 4 5 GENERAL INFORMATI ON ............................................................................................................................................................... 5 5.1 CLIENT INFORMATION............................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U. T. .......................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE .............................................................................................................. 6 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................... 6 5.5 MEASUREMENT UNCERTAINTY................................................................................................................ 6 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ................................................................. 6 5.7 LABORATORY FACILITY .......................................................................................................................... 6 5.8 LABORATORY LOCATION ........................................................................................................................ 6 5.9 TEST INSTRUMENTS LIST ....................................................................................................................... 7 6 TEST RES ULTS AND M EAS UREM ENT DATA........................................................................................................................ 8 6.1 ANTENNA REQUIREMENT ....................................................................................................................... 8 6.2 CONDUCTED EMISSIONS........................................................................................................................ 9 6.3 CONDUCTED OUTPUT POWER .............................................................................................................. 12 6.4 20DB OCCUPY BANDWIDTH ................................................................................................................. 13 6.5 CARRIER FREQUENCIES SEPARATION .................................................................................................... 14 6.6 HOPPING CHANNEL NUMBER................................................................................................................ 15 6.7 DWELL TIME ...................................................................................................................................... 16 6.8 PSEUDORANDOM FREQUENCY HOPPING SEQUENC…

Text truncated - open the document above for the full version.

Test Setup Photos

EUT Photos (Model: 102S) EUT Antenna Locations Body Back side (0mm) Bottom side(0mm) Top side (0mm)

Test Setup Photos

Report No: JYTSZE201002503 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 84 7 Test Setup Photo Radiated Spurious Emission Below 1GHz Above 1GHz Report No: JYTSZE201002503 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2010025 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 84 Conducted Emission 8 EUT Constructional Details Reference to the test report No.: JYTSZE201002501