2AXUI-TID10SMART PHOTO FRAME

7LEXWD_SmartFrame_7,' Campany profile 7,%87$ is a brand of new generation electronic products, mainly producing and selling tablet computers and notebook computers. The goal of 7,%87$ is to provide our customers with appropriate and efficient products, pay attention to the friendly relationship between environment and technology. We attach great importance to customer experience and want to know what customers think of our products, this is our customer relationship idea 01 Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may couse undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. USB cable is only used to power the device from dedicated power supply. It cannot be plugged in to a computer or tablet device. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7.9" (20 cm) from all persons and must not be co-located or operating in conjunction with any other antenna(s) or transmitter. End-users and installers must be provided with antenna(s) installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 02 English 03 4VQQPSUFE
PQFSBUJPO
FOE
BOE
TVQQPSUFE
WJEFP
GPSNBU
BOE
QJDUVSF
GPSNBU 'PS
NPSF
JOTUSVDUJPOT
ZPV
DBO
WJTJU
IUUQTGSBNFPOFUJNQPSU@GBR
0        
                ­     ­  Frameo APP instructions 1. Click the Add User button of the photo frame. 2. Enter the displayed numbers into the 'Frameo APP'. 93 31 29 86 64 0 Frameo APP instructions 3. Select the photo you want to send. 4. Select the frame you want to send. 0 3. Open the 'Manage Photos' option and click to'import photos' 1. Insert SD card or USB drive Instructions for SD card and USB drive 2. Open the display interface and click the 'Settings button' 0 FAQ Q: SD card cannot be found Q: The USB drive cannot be found A:The USB drive needs to be in 'NTFS' and 'FAT32' format to be read by the device. If the USB drive is in 'exFAT' format, it cannot be read. Please check whether the format of the USB drive is 'exFAT' first, if so, you can save the data in the USB drive to the computer first, and then format the USB flash drive into 'NTFS' and 'FAT32' formats (NOTE that formatting All data in the USB drive will be deleted!Please make sure to back up the data in the USB drive to the computer in advance) Then put the data into the USB drive. A: It may be because the SD card storage is too large, please replace the SD card with less than 128G.  . 7,' CONTACT INFORMATION DOOOLQNOXFN#RXWORRNFRP ZZZWLEXWDSDGFRP Designed by 5*#65",Assembled in PRC    7,%87$
-78
)-2)
%6/)
*C6
)0)/8632-7',)
63(9/8)
()6
2)9)2
)2)6%8-32
(-)

,%9487A',0-',
%&0)831498)6
92(
38)&33/31498)6
,)678)008
92(
:)6/%9*8 %7
$-)0
:32
7,%87$
-78
)7
927)6)2
92()2
%2+)1)77)2)
92(
)**-<-)28)

63(9/8)
%2<9&-)8)2
92(
(%&)-
%9*
(-)
*6)92(0-',)
)<-),92+
<;-7',)2

1;)08
92(
)',2303+-)
<9
%',8)2 "-6
0)+)2
+63@)2
")68
%9*
(%7
92()2)60)&2-7
92(
1B',8)2
;-77)2

;%7
92()2
:32
927)6)2
63(9/8)2
,%08)2
(%7
-78
927)6)

92()2&)<-),92+7-()) ?&)67)8<8
:32
2+0-7',
2%',
)987',

;;;320-2)(3'86%270%836'31 01 Warning: Dieses gerät den der kommunikation des 15 teil. War Von wird: 1.Dieses gerät nicht schädliche. 2.Dieses gerät müssen jede störung, einschließlich führen die arbeit. Oder Modi ein positives ion nicht ausdrücklichen geneh migung durch. Führen. Nutzer zugang Dieses gerät schon getestet zu nden den klasse B digitale für, Der kommunikation des 15 teil. Die für die bereitstellung angemessener schutz zu schädliche In. Dieses gerät die,, und strahlung störendes gewebe, ohne installation und Wurde, könnten funkkontakt schädliche. nicht. Nicht eine bestimmte. Wenn gerät radio Oder schädliche Fernsehempfang, kann drehen o, ermutigt nutzer zu Störungen eines Oder mehrerer die folgenden maßnahmen: Anzupassen Oder die empfangen die. Erhöhen und empfänger zwischen. Ausrüstung mit einem di . Die steckdose verschiedene empfänger. Des dealer Oder eines erfahrenen, techniker um hilfe Bitten. Usb-kabel kabel verwendet strom geräte für. Es nicht eindringen. Computer Oder. Übereinstimmung müssen installiert und die und die s) für sender sollte installiert die entfernt zumindest 7,9 "(20 zentimeter) Von alle, ist nicht kompatibel Oder. Mit anderen die s) Oder sender. Zu nanzingenieuren und installationsmethoden die installiert und sender. Für störendes gew…

Text truncated - open the document above for the full version.

CHITECH SHENZHEN TECHNOLOGY CO.,LTD The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 4/7/2023 U.S. Agent Designation CHITECH SHENZHEN TECHNOLOGY CO.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AXUI-TID10): Name and company of U.S. agent: Tim Payne, FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of CHITECH SHENZHEN TECHNOLOGY CO.,LTD. CHITECH SHENZHEN TECHNOLOGY CO.,LTD accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Lydia Deng Manager CHITECH SHENZHEN TECHNOLOGY CO.,LTD Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V03

Sincerely, Name/Title： Lydia Deng/Manager Company: CHITECH SHENZHEN TECHNOLOGY CO.,LTD Address: 101, NO.48, Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen China Phone: 86-0755-21380496 Fax: 86-0755-21380496 E-Mail: [email protected]

FCC ID: 2AXUI-TID10 Page 1 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. External Photos Photo 1 Photo 2 FCC ID: 2AXUI-TID10 Page 2 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 FCC ID: 2AXUI-TID10 Page 3 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 FCC ID: 2AXUI-TID10 Page 4 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 FCC ID: 2AXUI-TID10 Page 5 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 FCC ID: 2AXUI-TID10 Page 6 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 ------End------

FCCIDLabel FCCID:2AXUI-TID10 Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjectto thefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation.

FCC ID: 2AXUI-TID10 Page 1 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Internal Photos Photo 1 Photo 2 FCC ID: 2AXUI-TID10 Page 2 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 FCC ID: 2AXUI-TID10 Page 3 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 WIFI Antenna FCC ID: 2AXUI-TID10 Page 4 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 FCC ID: 2AXUI-TID10 Page 5 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 FCC ID: 2AXUI-TID10 Page 6 of 6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 Photo 12 ------End------

RF Exposure evaluation FCC ID: 2AXUI-TID10 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information Only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: 2.4G / Metal antenna 1.66dBi for 2400-2500MHz; 5. Manufacturing Tolerance WIFI(Peak) IEEE 802.11b (PEAK) Frequency (MHz) Antenna 1 2412 2437 2462 Target (dBm) 13 13 12 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11g (PEAK) Frequency (MHz) Antenna 1 2412 2437 2462 Target (dBm) 12 12 12 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (PEAK) Frequency (MHz) Antenna 1 2412 2437 2462 Target (dBm) 12 12 12 Tolerance ± (dB) 1.0 1.0 1.0 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 1.66dBi, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW 2.4GWIFI 14 25.119 1.66 1.466 0.00732 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

Page 1 of 40 Report No.: AIT23031607W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: CHITECH SHENZHEN TECHNOLOGY CO.,LTD Applicant add.: 101, NO.48, Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen, China Manufacturer: CHITECH SHENZHEN TECHNOLOGY CO.,LTD Manufacturer add.: 101, NO.48, Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen, China Product Information: Product Name: SMART PHOTO FRAME Model No.: TID10, D10, TID10S, DF101, DF102 Brand Name: TIBUTA/BYYBUO FCC ID: 2AXUI-TID10 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Mar. 16, 2023 Date of Test: Mar. 16, 2023~ Apr. 02, 2023 Date of Issue: Apr. 03, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC/ISED requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 40 Report No.: AIT23031607W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 5 2.1 Statement of the Measurement Uncertainty .............................................................................. 5 2.2 Measurement Uncertainty ......................................................................................................... 5 3 TEST FACILITY ............................................................................................................................................................. 6 3.1 Deviation from standard ............................................................................................................ 6 3.2 Abnormalities from standard conditions .................................................................................... 6 3.3 Test Location ............................................................................................................................. 6 4 GENERAL INFORMATION ......................................................................................................................................... 7 4.1 Test frequencies ........................................................................................................................ 8 4.2 EUT Peripheral List ................................................................................................................... 8 4.3 Test Peripheral List ................................................................................................................... 8 4.4 TEST METHODOLOGY............................................................................................................ 9 4.5 Description of Test Modes ....................................................................................................... 10 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 11 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 12 6.1 Antenna requirement .............................................................................................................. 12 6.1.1 Standard requirement: .................................................................................................... 12 6.1.2 EUT Antenna: ................................................................................................................. 12 6.2 On Time and Duty Cycle ......................................................................................................... 13 6.2.1 Standard requirement: .................................................................................................... 13 6.2.2 Measuring Instruments and Setting: ............................................................................... 13 6.2.3 Test Procedures .............................................................................................................. 13 6.2.4 Test Setup Layout ........................................................................................................... 13 6.2.5 EUT Operation during Test ............................................................................................. 13 6.2.6 Test result ....................................................................................................................... 13 6.3 Maximum Conducted Output Peak Power Measurement ....................................................... 14 6.3.1 Standard requirement: .................................................................................................... 14 6.3.2 Measuring Instruments: .................................................................................................. 14 6.3.3 Test Procedures: .........................................................…

Text truncated - open the document above for the full version.

Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. Antennaspecification AntennaSampleConfirmationFrom Nameof supplier ShenZhenAihuiTechnologyCo.，Ltd Customer name ZhiTeng Samplename DF102 model Samplesize Inspection item Performance test Visual inspection Structure Inthe news Test results Notes QualityAudit ProjectAudit Business confirm ation Thefollowingistobecompletedbytheclient Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. Customer feedback Customer signature/seal date: AntennaTestReport TestUnit:ShenzhenAihuiTechnologyCo.,Ltd. Materials FPCcoaxialline Antennatype MonopoleType Polarizationmode Linear Application scenario Workingband VSW WIFI R≤2 Power Max：2W Impedance50Ω Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. dBi TestEquipmentHPE5071C、ShieldingRoom、3Dautomaticturntable AntennaDescription:： 1.Groundingprocessingandpicturedescription:no 2.Needtochangethemotherboardtomatch:no  Testvoltage:3.6V,checktheantennacontactisgoodbeforetesting. TheRFcableoftheintegratedtesteriskeptinanaturalstateandcannotbe curled. Specification:testthespecifiedpowerlevel,allindicatorsmustconformtothe specifications. Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 1.ProjectImage 2.TestFixture 3.Antennamatchingcircuit 4.S11test 5.Antennapassiveefficiencyandgain 6.Darkroomtestequipmentanddata 7.Schematicdiagramofantennaassembly 8.Antennaenvironmenthandling 9.Antennamassproductionindex 10.Structuraldrawing Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 1.ProjectImage Thefinalverificationantennaperformanceprototypeinourcompanyforatleastoneyear, easytoanalyzeandsolvetheproblemofantennamassproduction,toensurethequality ofantennashipment 2.TestFixture Objective:totestthepassiveparametersofantennaasaccuratelyaspossible.Making Method:thehandsetismadeofa50ohmcoaxialcable,oneendofwhichisconnectedto thetestpointofthebackendofthematchingcircuitofthehandsetmotherboard(frontend oftheRFtesthole),andtheotherendisconnectedtotheSMAjoint.Thediagramisas follows: 3、Antennamatchingcircuit Modify E01E02E03 NoNoNo Note:Thematchisunmodified. Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 4.S11test 4.0 4.0s11testmethoddescriptionoftestequipment:NetworkAnalyzer(E5071C)test method:a50ohmCABLEisusedtoexportfromtheinstrumenttestport.TheSMA connectorforconnectingthehandsetiscalibratedusingacalibrationpiece,recordthe echolossandstandingwaveratiocorrespondingtotherelevantfrequencypoints.The testschematicisasfollows: Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 5.Darkroomtestequipmentanddata WIFI&BT WIFI2.4G Freq(MHz)Efficiency(%)Gain(dBi) 2400 58.51.25 2410 56.91.44 2420 57.41.30 2430 58.61.20 2440 57.21.51 2450 51.61.66 2460 59.31.25 2470 52.51.30 2480 53.41.25 Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 6.TestEquipment Testsystem:shieldeddarkroom Thetemperaturewas22°C±3°Candthe humiditywas50%±15% Testequipment:whentestingpassivedata,usetheNetworkanalyzerAGILENTE5071C totestactivedata,usetheomnibusCMW500 Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 7.Activeantennatestdata 8.Schematicdiagramofantennaassembly Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 9.Antennaenvironmenthandling 10.Antennamassproductionindex Whentheantennais mass-produced,the standingwaveratiois takenasthe mass-producedtest standard.Basedonthe differencesoftheproject itself,thefollowingcriteria aregiven: Standardforvolume production Address:402TEL:0755-23203435fax:0755-23203435,BlockC,JuxinScienceand TechnologyIndustrialPark,Nanchangcommunity,xixiang,BaoanDistrict,Shenzhen ShenzhenAihuiTechnologyCo.,Ltd. 680MHZ-2700Mhz VSWR(MassProduction performance)&LT; VSWR(recognition performance)0.5 10.1Structuraldrawings

Dong guan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 1 of 46 Appendix C RF Test Data for 2.4GWIFI (Conducted Measurement) Product Name: SMART PHOTO FRAME Trade Mark: TIBUTA/BYYBUO Test Model: TID10 Environmental Conditions Temperature: 25.5 C Relative Humidity: 52.4% ATM Pressure: 100.0 kPa Test Engineer: Simba Huang Supervised by: Seal Chen Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 2 of 46 Contents Page COVER PAGE 1 Duty Cycle ........................................................................................................................................................................................... 3 1.1 Test Result ............................................................................................................................................................................... 3 1.2 Test Graphs ............................................................................................................................................................................. 4 2 Maximum Conducted Output Power ................................................................................................................................................... 9 2.1 Test Result ............................................................................................................................................................................... 9 3 -6dB Bandwidth ................................................................................................................................................................................. 10 3.1 Test Result ............................................................................................................................................................................. 10 3.2 Test Graphs ........................................................................................................................................................................... 11 4 Maximum Power Spectral Density Level ........................................................................................................................................... 16 4.1 Test Result ............................................................................................................................................................................. 16 4.2 Test Graphs ........................................................................................................................................................................... 17 5 Band Edge ......................................................................................................................................................................................... 22 5.1 Test Result ............................................................................................................................................................................. 22 5.2 Test Graphs ........................................................................................................................................................................... 23 6 Conducted RF Spurious Emission ..................................................................................................................................................... 29 6.1 Test Result ............................................................................................................................................................................. 29 6.2 Test Graphs ........................................................................................................................................................................... 30 7 Restrict Band ..................................................................................................................................................................................... 39 7.1 Test Result ............................................................................................................................................................................. 39 7.2 Test Graphs ........................................................................................................................................................................... 41 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 3 of 46 1 Duty Cycle 1.1 Test Result Mode Frequency (MHz) Antenna Duty Cycle (%) 1/T (kHz) b 2412 Ant1 99.97 0.04 b 2437 Ant1 99.99 0 b 2462 Ant1 99.97 0.04 g 2412 Ant1 99.75 0.18 g 2437 Ant1 99.82 0.18 g 2462 Ant1 99.79 0.18 n20 2412 Ant1 99.73 0.2 n20 2437 Ant1 99.72 0.2 n20 2462 Ant1 99.74 0.2 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 4 of 46 1.2 Test Graphs Test Graphs b 2412MHz Ant1 b 2437MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 5 of 46 Test Graphs b 2462MHz Ant1 g 2412MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 6 of 46 Test Graphs g 2437MHz Ant1 g 2462MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 7 of 46 Test Graphs n20 2412MHz Ant1 n20 2437MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23031607W1 FCC ID: 2AXUI-TID10 Page 8 of 46 Test Graphs n20 2462M…

Text truncated - open the document above for the full version.