2BMXI-CMBC22EUBattery Wireless Window Camera

Camera ×1Camera Mount ×1 Static Cling Stickers ×2 Hook and Loop Fastener ×1 (Complimentary gift) User Manual ×1Charging Cable ×1 Autocollants statiques ×2 Crochet et boucle fastener ×1 (Offre spéciale) Return Sleep ReturnShareMore Set up Full screen Threaded Bracket Interface Power On/Off 1.Long press the button to turn on or off the device 2.Double click the on/off button twice to reset the device. Please pay attention to waterproofing while charging. USB Type-C Charging Port App will remind you to charge your camera when the battery is low. 1. For the first time, you need to register. Click on the "Sign Up" button on the top right and select your country and region to complete the registration. 2. For registered users, simply enter your account and password to log in normally. Download the CiNMOORE app from the App Store(iOS devices) or Google Play(An-droid devices) 1. Reset Camera Press Power button for 3-5 seconds to turn on Device playback Voice : The device has been turned on, Please use the APP to bind the device. 2. Add Camera Click the upper right corner"+", and scan the QR code on the camera. 3. Configure the Network Select your 2.4GHz home Wi-Fi name and enter Wi-Fi password on the APP (currently only supports 2.4GHz Wi-Fi), then follow the on-screen instructions to complete the setup. * There may be slight differences between the pictures and the actual products. Please refer to the actual products. * It is necessary to fully charge the device before the first use. * Es necesario cargar completamente el dispositivo antes del. Quick Start Crochet et boucle fastener Lense: 3M adhesive caméra Montant de la caméra What' s in the BoxProduct VerviewConnect CameraQuick Installation FCC Information Please take attention that changes or modification notexpressly approved by the party responsible for compliancecould void the user' s authority to operate the equipment.FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television reception,which can be determined by turing the equipment off andon, the user is encouraged to try to correct the interferenceby one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment andreceiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technicianfor help To maintain compliance with FCC' s RF Exposure guidelines,This equipment should be installed and operated withminimum 20cm distance between the radiator and yourbody: Use only the supplied antenna. FCC Conditions This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received,including interference that may cause undesired operation. Company Statement 1.We have tried our best to ensure the complete-ness and accuracy of the materials.lf you haveany questions or disputes,please refer to thecompany' s final explanation. 2.we will update the information content in atimely manner according to the productfunction. And regularly modify and update theproducts or programs described in this informa-tion.Updates will be added to the new versionwithout notification. 3.The content of this material is for reference onlyfor customers.There is no guarantee that it isexactly the same as the product.Please focus onthe actual product. 4. The camera parts shown in this information arefor illustration only. It does not represent thepurchased configuration. Operating conditions: emperature: 0°Cto 45°C（32 °F to113°F) Humidity 95% or less (non-condensing) FCC Statements This device complies with part 15 of the FCCRules.Operation is subject to the following twoconditions: (1)this device may not cause harmfulinterface,and (2)this device must accept anyinterference received,including interference thatmay cause undesired operation. haut-parleur Support interface filetée Puissance et interrupteur * Il peut y avoir des différences entre les images et les produits réels. Veuillez vous référer aux produits réels. produits 1. Réinitialiser Caméra Presse Appuyez sur le bouton d'alimenta- tion pendant 3 à 5 secondes pour tourner sur Appareil Lecture vocale : L'appareil possède a été activé. Veuillez utiliser l'application pour lier l'appareil. 1.Appuyez longtemps sur le bouton,Aller à allumer ou éteindre l’appareil. 2.Double-cliquez sur le bouton d’alimentation deux fois pour réinitialiser l’appareil. 2. Ajouter une caméra Cliquez le supérieur droite coin"+",et balayage le code QR sur le caméra. 3. Configurer le réseau Entrer ton maison Wi-Fi compte et mot de passe sur le APP ( actuellement seulement (Prend en charge le Wi-Fi 2,4 GHz) alors suivre le instructions à l'écran terminer la configuration. Hook and Loop Fastener 3M Adhesive Camera Mount Cámara de fotos ×1 Montaje para la cámara×1 Adhesivo electrostático×2 Pista de mágica ×1 (Regalo adicional) Manual de instrucciones ×1 Cable de carga ×1 Dormir Volver VolverCompartirMás Configuración Conexión roscada Altavoz Puerto USB tipo C: Por favor, preste atención a la impermeabilidurante la carga. Puerto de carga USB tipo C La aplicación te recordará que debes cargar tu cámara cuando la batería esté baja. 1. Restablecer la cámara Pulse el botón de encendido durante 3-5 segundos para activar la voz de reproducción del d…

Text truncated - open the document above for the full version.

Hangzhou SuperAcme Electronics Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [April 24, 2026] U.S. Agent Designation [Hangzhou SuperAcme Electronics Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BMXI-CMBC22EU Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Hangzhou SuperAcme Electronics Technology Co., Ltd.]. [Hangzhou SuperAcme Electronics Technology Co., Ltd.] with the FRN [0036433241] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Yongzhi Wang] [Huiying Fan] [manager] [Director] [Hangzhou SuperAcme Electronics Technology Co., Ltd.] [GLOCERTS TECHNOLOGY INC]

Hangzhou SuperAcme Electronics Technology Co., Ltd. (April 17, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BMXI-CMBC22EU [Hangzhou SuperAcme Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name)Yongzhi Wang Hangzhou SuperAcme Electronics Technology Co., Ltd. (April 17, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BMXI-CMBC22EU [Hangzhou SuperAcme Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name)Yongzhi Wang

Hangzhou SuperAcme Electronics Technology Co., Ltd. Model Difference Data:April 17, 2026 Product description: Battery Wireless Window Camera Model name: CM-BC22EU, CM-BC23EU, CM-BC24EU, CM-BC25EU, CM-BC26EU, CM-BC27EU, CM-BC28EU, CM-BC29EU Trade Name: CINMOORE FCC ID: 2BMXI-CMBC22EU All the model are the same circuit and RF module, only the model names are different. Regards Sincerely Client’s signature : Client’s name / title : Yongzhi Wang(manager) Contact information / address:14th Floor, Building 2, Silergy Plaza, 6 Lianhui St., Binjiang District, Hangzhou, Zhejiang Province, 310000 China

Hangzhou SuperAcme Electronics Technology Co., Ltd. (April 17, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Battery Wireless Window Camera / CM- BC22EU, CM-BC23EU, CM-BC24EU, CM-BC25EU, CM-BC26EU, CM-BC27EU, CM-BC28EU, CM-BC29EU / FCC ID: 2BMXI-CMBC22EU ) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Yongzhi Wang Title: manager

Hangzhou SuperAcme Electronics Technology Co., Ltd. (April 14, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Yongzhi Wang Title: manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: CM-BC22EU External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BMXI-CMBC22EU Model No.: CM-BC22EU

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 7 Model: CM-BC22EU Internal Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 7 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 7 BT ANT Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 7 WIFI ANT Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 7 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 6 of 7 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 7 of 7

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2BMXI-CMBC22EU Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation BT+WIFI supported simultaneous transmission: BT+2.4GWIFI: ∑MPE Ratio = 0.00020/1+0.02172/1=0.02192≤1, So passed. Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result BLE GFSK &2480 -1±1 0 1.0000 0.9863 (-0.06dBi) 0.00020 1 Pass 2.4G WIFI 802.11b&2 462 16±1 17 50.1187 2.1777 (3.38dBi) 0.02172 1 Pass

ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential SPECIFICATIONFORAPPROVAL CUSTOMER/PROJECT： YANJI CUSTOMERP.N.： PRODUCTNAME.： BoardborneAntenna MODELNO.： SPECIFICATION： VERSIONDATEREVISIONDESCRIPTION T:A2026-4-14 newlyadded Pleasereturntousonecopyof“SPECIFICATIONFORAPPROVAL”withyour approvedsignature. ADD:No.358LiuyuanRD.,BaoshanUrbanIndustrialDistrict.,Shanghai,PR.China. TEL:+86-21-66276925(26/29/35)－615 SUPPLIERAUTHORIZEDSIGNATURE PREPAREDCHECKEDAPPROVED JENNY CUSTOMERAUTHORIZEDSIGNATURE ProjectQuality ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential Content DirectoryUUTT..............................................................................................................................2 TUTU1UUTTDEFINITIONU..........................................................................................................................4 TUTU2UUTTTestequipment........................................................................................................................4 TUTU3UUTTApplicablefrequencyband.....................................................................................................4 TUTU4UUTTBasictestingitemsU..................................................................................................................4 TUTU4.1UUTTTUTUStandingwaveratiodiagramUTT....................................................................................4 TUTU4.2UUTTSmithimpedancediagramUUT..........................................................................................4 TUTU4.3UUTTradiationpatternUUTT....................................................................................................4 TUTU4.4UUTTGainandefficiencyUUTT.....................................................................................................4 TUTU5UUTTTestindicatorsanddatachartsUUT..............................................................................................4 TUTU5.1UUTTUTUStanding-waveratio....................................................................................................4 TUTU5.1.1UUTTStandingwaveratiodiagram...........................................................................4 TUTU5.1.2UUTTStandingwaveratiodataUUT.................................................................................5 TUTU5.2UUTTSmithimpedancecirclediagram................................................................................5 TUTU5.3URadiationpatternUUTT.........................................................................................................6 TUTU5.3.1UUTTH-planeUUTT.............................................................................................................6 TUTU5.3.2UUTTTUTUE-planeU..........................................................................................................7-8 TUTU5.4UUTTGainandefficiencyU&TRP/TISUUT..................................................................................9 TUTU6UUTTTUTUImpedancematchingrequirementsU.......................................................................................9 7AntennaSiseTUT.........................................................................................................................10 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 1DEFINITION dBiDecibelrelativeisotropicantenna TxTransmitfrequency RxReceivefrequency TRPTotalRadiatedPower TISTotalIsotropicSensitivity VSWRVoltageStandingWaveRatio GSMGlobalServiceforMobilecommunication DCSDigitalCommunicationSystem CDMACodeDivisionMultipleAccess WCDMAWidebandCodeDivisionMultipleAccess 2Testequipment Canbeincreasedordecreasedaccordingtoactualsituation vectornetworkanalyzer Comprehensivetestinstrument GTSdarkroom 3Applicablefrequencyband Marktheapplicablefrequencybandswithothercolors。 Systemup WIFI(2.4G)2412MHz～2483MHz 5.8G5725MHz～5850MHz ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 4Basictestingitems 4.1Standingwaveratiodiagram 4.2Smithimpedancediagram 4.3Radiationpattern 4.4Gainandefficiency 5Testindicatorsanddatacharts 5.1standing-waveratio 5.1.1Standingwaveratiodiagram 5.1.2Standingwaveratiodata Freq/MHz24002500 VSWR 2.11.8 ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 5.2Smithimpedancecirclediagram ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 5.3Radiationpattern 5.3.1H-plane ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 5.3.2E-plane ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 5.4Gainandefficiency Frequency[Hz]EfficiencyGain[dBi] 240000000019%-1.270760472 241000000021%-1.057468672 242000000021%-0.74330191 243000000022%-0.627288383 244000000022%-0.252705338 245000000023%-0.055529865 246000000022%-0.239072743 247000000021%-0.373808203 248000000021%-0.495050243 249000000019%-0.850972956 250000000018%-1.088121722 6Impedancematchingrequirements ShanghaiJesoncomCommunicationEngineeringCo.,Ltd Confidential 7Antennasize

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 36 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Battery Wireless Window Camera FCC ID: 2BMXI-CMBC22EU Trademark(s): CINMOORE Model/Type reference: CM-BC22EU, CM-BC23EU, CM-BC24EU, CM-BC25EU, CM-BC26EU, CM-BC27EU, CM-BC28EU, CM-BC29EU Applicant’s name: Hangzhou SuperAcme Electronics Technology Co., Ltd. Address: 14th Floor, Building 2, Silergy Plaza, 6 Lianhui St., Binjiang District, Hangzhou, Zhejiang Province, 310000 China Manufacturer: Hangzhou SuperAcme Electronics Technology Co., Ltd. Address: 14th Floor, Building 2, Silergy Plaza, 6 Lianhui St., Binjiang District, Hangzhou, Zhejiang Province, 310000 China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Mar. 03, 2026 Sample tested Date: Mar. 03, 2026 to Mar. 12, 2026 Issue Date: Mar. 12, 2026 Report No.: CTB26030301907RF01 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Te s t Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26030301907RF01 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 36 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 3 2. TEST SUMMARY ........................................................................................................................... 4 3. MEASUREMENT UNCERTAINTY ................................................................................................. 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.4 Channel List ..................................................................................................................................... 7 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 11 6.1 Block Diagram Of Test Setup ......................................................................................................... 11 6.2 Limit ................................................................................................................................................ 11 6.3 Test procedure ............................................................................................................................... 11 6.4 Test Result ..................................................................................................................................... 13 7. RADIATED SPURIOUS EMISSION ............................................................................................. 15 7.1 Block Diagram Of Test Setup ......................................................................................................... 15 7.2 Limit ................................................................................................................................................ 15 7.3 Test procedure ............................................................................................................................... 15 7.4 Test Result ..................................................................................................................................... 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............................................... 24 8.1 Block Diagram Of Test Setup ......................................................................................................... 24 8.2 Limit ................................................................................................................................................ 24 8.3 Test procedure ............................................................................................................................... 24 8. 4 Test Result ......................................................................................…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 55 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: Battery Wireless Window Camera FCC ID: 2BMXI-CMBC22EU Trademark(s): CINMOORE Model/Type reference: CM-BC22EU, CM-BC23EU, CM-BC24EU, CM-BC25EU, CM-BC26EU, CM-BC27EU, CM-BC28EU, CM-BC29EU Applicant’s name: Hangzhou SuperAcme Electronics Technology Co., Ltd. Address: 14th Floor, Building 2, Silergy Plaza, 6 Lianhui St., Binjiang District, Hangzhou, Zhejiang Province, 310000 China Manufacturer: Hangzhou SuperAcme Electronics Technology Co., Ltd. Address: 14th Floor, Building 2, Silergy Plaza, 6 Lianhui St., Binjiang District, Hangzhou, Zhejiang Province, 310000 China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Mar. 03, 2026 Sample tested Date: Mar. 03, 2026 to Mar. 12, 2026 Issue Date: Mar. 12, 2026 Report No.: CTB26030301907RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is WIFI-2.4GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB26030301907RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 55 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................................ 4 2. TEST SUMMARY .......................................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY............................................................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ..................................................................................... 7 4.1 Product Information .................................................................................................................................................... 7 4.2 Test Setup Configuration .......................................................................................................................................... 7 4.3 Support Equipment ..................................................................................................................................................... 7 4.4 Channel List .................................................................................................................................................................. 8 4.5 Test Mode ...................................................................................................................................................................... 8 4.6 Test Environment ........................................................................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED ............................................…

Text truncated - open the document above for the full version.