A3KM117LCD Monitor

Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 150S4FG / 150S4FB Embedded Power Supply z 15-inch color LCD monitor with excellent display performance z Ultra slim frame design z Standard VGA analog input z Embedded universal AC power supply z AUTO adjustment optimizes picture quality z User installable bezel for optional protective cover choice RETURN TO TOP OF THE PAGE Technical Specifications* LCD PANEL • TypeTFT LCD • Screen size15" visual • Pixel Pitch0.297 x 0.297mm (15.0") • LCD Panel type 1024 x 768 pixels R.G.B. vertical stripe Anti-glare polarizer hardness • Effective viewing area304.1 x 228.1mm (15.0") • Display Colors16.7M colors SCANNING • Vertical refresh rate 56Hz-76Hz • Horizontal frequency 30kHz-61kHz VIDEO • Video dot rate80 MHz • Input impedance Exhibit 3 Installstion and Operating instructions * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes - Video 75 ohm - Sync 2K ohm • Input signal levels700m Vpp • Sync input signal Separate sync Composite sync Sync on Green • Sync polaritiesPositive and negative • Input Frequency XGA Hsync 48- 61 kHz, Vsync 60 - 76 Hz (N.I.) SVGA Hsync 35- 50 kHz, Vsync 56 - 75 Hz (N.I.) VGA Hsync 31- 38 kHz, Vsync 60 - 76 Hz (N.I.) • Video interfaceAnalog (D-Sub) OPTICAL CHARACTERISTICS • Contrast ratio 400 (typ.) • Brightness 250 cd/m 2 (typ.) • Peak contrast angle6 o'clock • White Chromacity x: 0.283 y: 0.297 (at 9300° K) x: 0.313 y: 0.329 (at 6500° K) • Viewing Angle (C/R >5) Upper >50° (typ.) Lower > 60° (typ.) Left >75 ° (typ.) Right >75 ° (typ.) • Response time <=30ms (typ.) • Maximum1024 x 768 at 75Hz • Recommended 1024 x 768 at 60Hz 14 user definable modes 14 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.469 640*350 70.086 31.469 720*400 70.087 31.469 640*480 59.940 35.000 640*480 67.000 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: RETURN TO TOP OF THE PAGE Physical Specifications 37.861 640*480 72.809 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 48.077 800*600 72.188 46.875 800*600 75.000 49.700 832*624 75.000 48.363 1024*768 60.004 56.476 1024*768 70.069 60.023 1024*768 75.029 Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color ON Active Yes Yes < 30W Green Stand-by Blanked No Yes < 1W Amber Suspend Blanked Yes No < 1W Amber OFF Blanked No No < 1W Amber This monitor is E NERGY S TAR ® compliant. A s an E NERGY S TAR ® P artner, PHILIPS has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. • Dimension (WxHxD) *343 x 310 x 170 mm (incl. Pedestal) • Weight *3.7 kg * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable: RETURN TO TOP OF THE PAGE • Tilt (Forward / Backward)- 5° / 25° • Power supply100 — 240 VAC, 50/60 Hz • Power consumption 23 W (typ.) • Temperature (operating)5° C to 40° C • Relative humidity 20% to 80% • System MTBF50K hrs (CCFL 30Khrs) • Cabinet color 150S4FG: Light Gray 150S4FB: Black Pin No. Assignment Pin No. Assignment 1 Red video input 9 DDC +5V 2 Green video input 10 Logic ground 3 Blue video input 11 Identical output - connected to pin 10 4 Identical output - connected to pin 10 12 Serial data line (SDA) 5 Cable detect 13 H. Sync / H+V 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function RETURN TO TOP OF THE PAGE Tilt Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • The Base • Getting Started • Optimizing Performance Front View Product Description RETURN TO TOP OF THE PAGE Optimizing Performance z For best performance, ensure that your display settings are set at 1024x768@60Hz (for14"/15") or 1280x1024, 60Hz (for17"/18"). UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up. OK button which when pressed will take you to the OSD controls POWER button switches your monitor on Automatically adjust the horizontal position, vertical position, phase and clock setting. z You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this program. More about FP_setup01.exe RETURN TO TOP OF THE PAGE Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. Connecting to Your PC Your LCD Monitor : Front View Product Description • Accessory Pack • Connecting to Your PC • The Base • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts. RETURN TO TOP OF THE PAGE Connecting to Your PC Item Description 1) Audio in Cable (Option only available for Multimedia version) (color lime) 2) Microphone out Cable (Option only available for Multimedia version)(color pink) 3) Power Cable (socket may …

Text truncated - open the document above for the full version.

POL LP CLKV STV GOE STH CLK+/- DDC DSUB_CABLEHS/VS CONNECT TO PANEL BL_CTL PAN E L_ ID BRIGHTNESS EEPROM_WP IIC 12V 12V 3.3V R +/- G +/- B +/- ADDR0/15, DATA0/7 BANK, ROM_OE, M29W_WE Hudson3 150S/V/P/B 4 Function Block SCALER GM2116AA/BB Clock:14.3 MHz Flash ROM M29W010B EEPROM D-SUB KEY & LED CTL DDC_A R.G.B. AC to DC Power Inverter BD Switching Freq.: 60KHz to 150KHz 74LVC14 3.3V Panel PWR RSDS Exhibit 5 Block diagram

FCC ID: A3KM117 Exhibit 7 Photographs Front View FCC ID: A3KM117 Rear View FCC ID: A3KM117 Label

Exhibit 2 FCC ID Label

FCC ID: A3KM117 Assembly w/o Front cabinet FCC ID: A3KM117 Assembly w/o Back Cover FCC ID: A3KM117 Shielding Cover FCC ID: A3KM117 Shielding Cover FCC ID: A3KM117 Assembly w/o Shielding Cover FCC ID: A3KM117 PCB Layout FCC ID: A3KM117 PCB Layout FCC ID: A3KM117 PCB Layout FCC ID: A3KM117 PCB Layout FCC ID: A3KM117 Assembly w/o PCB FCC ID: A3KM117 Shielding Plate FCC ID: A3KM117 LCD Panel (LG.PHILIPS) FCC ID: A3KM117 LCD Panel (CPT) FCC ID: A3KM117 LCD Panel (HannStar) FCC ID: A3KM117 Power Cord and I/F Cables

Philips Electronics Industries (Taiwan) Ltd - EMC Lab. 5, Tze Chiang 1 Road, Chungli Industrial Park, Chungli, Taoyuan, Taiwan Tel.: +886-3-454-9862 Fax.: +886-3-454-9887 E-mail: [email protected] FCC Test Report Report No.: TYR87-2034 Date : 04 December, 2002 Page : Page 1 of 70 Customer : Philips Electronics Industries Name : Mr. S.T. Huang – EE LCD Address : 5, Tze Chiang 1 Road, Zip/City : Chungli Industrial Park, Country : Chungli, Taiwan, R.O.C. Equipment Under Test (including peripherals) : FCC ID. : A3KM117 Model Name : 150S4 Serial Number : TY0209587(CPT), TY0209588(LG.PHILIPS), TY0209598(HannStar) Description : 15” XGA LCD color monitor, Max. resolution 1024x768/75Hz EMC Standards : FCC Part 15 of October 01,1999 Class B ANSI C63.4-1992 Result : PASSED the limits/test-levels in the standards. Note : The results in this report apply only to the sample(s) and mode(s) tested. It is the manufacturer’s responsibility to assume the continued EMC compliance of production models. Date of receipt of EUT : 01 Nov. 2002 Date of performance of test : 04 Nov., 2002 to 02 Dec., 2002 Philips Electronics Industries (Taiwan) Ltd This report shall not be reproduce except in full, without written approval of the testing laboratory C.C. Wu - EMC Test Engineer Ronnie Yang - EMC Manager NVLAP Signatory Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 2 of 70 Table of contents 1. Summary of test results.............................................................................3 2. General information of EUT.......................................................................4 3. Test equipment.......................................................................................5 4. Test configuration of EUT and peripherals......................................................6 5. Test procedure.......................................................................................7 6. Measurement uncertainty...........................................................................9 7. Conducted emissions test..........................................................................10 8. Radiated emissions test............................................................................35 9. Photographs of test set-up.........................................................................66 10. References...........................................................................................70 Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 3 of 70 1. Summary of test results Test Standard Result Note Emission, ANSI C63.4-1992 Conducted emission Radiated emission FCC Part 15 FCC Part 15 Passed Passed Remark: The test sample fully complies with the requirements set forth in : FCC Part 15 Class B. Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 4 of 70 2. General Information of EUT The EUT, 15” color monitor : Model No. : 150S4 FCC ID : A3KM117 Brand : PHILIPS The color monitor automatically scans horizontal frequencies between 31KHz and 61KHz , and vertical frequencies between 56Hz and 76Hz. This color monitor displays sharp and brilliant images of text and graphics with a maximum resolution up to 1024x768 pixels. The monitor has 14 factory-preset modes as indicated in the following table: Mode Resolution H. freq. / V. freq Standard 1. 640 x 350 31.469Khz/70.087Hz VGA 2. 720 x 400 31.469Khz/70.087Hz VGA 3. 640 x 480 31.469Khz/59.940Hz VGA 4. 640 x 480 35.000Khz/66.667Hz Macintosh 5. 640 x 480 37.861Khz/72.809Hz VESA 6. 640 x 480 37.500Khz/75.000Hz VESA 7. 800 x 600 35.156Khz/56.250Hz VESA 8. 800 x 600 37.879Khz/60.317Hz VESA 9. 800 x 600 48.077Khz/72.188Hz VESA 10. 800 x 600 46.875Khz/75.000Hz VESA 11. 832 x 624 49.700Khz/75.000Hz Macintosh 12. 1024 x 768 48.363Khz/60.004Hz VESA 13. 1024 x 768 56.476Khz/70.069Hz VESA 14. 1024 x 768 60.023Khz/75.029Hz VESA Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 5 of 70 3. Test Equipment Test equipment used for line Conducted and Radiated emissions as following. All equipment were calibrated according to ANSI C63.4-1992 and ISO-9000 requirement unless otherwise specified. Traceability to R.O.C. and international standards is assured by using calibrated all equipment. - For Conducted Emissions Test: Test Equipment Model No. Serial No. Last Calibrate Next Calibrate Spectrum HP8568B 2928A04640 06/27/2002 06/27/2003 EMI Receiver R & S ESVS30 841977/006 06/13/2002 06/13/2003 LISN EMCO 3825/2 9311-2153 06/13/2002 06/13/2003 LISN EMCO 3825/2 9311-2154 06/13/2002 06/13/2003 RF Cable 8-meter N/A 05/29-2002 05/29/2003 - For Radiated Emissions Test: Test Equipment Model No. Serial No. Last Calibrate Next Calibrate Spectrum HP8568B 2928A04640 06/27/2002 06/27/2003 RF Preselector HP85685A 2620A00338 06/27/2002 06/27/2003 QP Adapter HP85650A 2811A01324 06/27/2002 06/27/2003 EMI Receiver R & S ESVS30 841977/006 06/13/2002 06/13/2003 Biconical Antenna EMCO 3110B 3222 06/04/2002 06/04/2003 Biconical Antenna EMCO 3110B 3224 06/04/2002 06/04/2003 Log-Periodic Antenna EMCO 3146A 1424 06/04/2002 06/04/2003 Log-Periodic Antenna EMCO 3146A 1425 06/04/2002 06/04/2003 Turn Table EMCO 1060 1068 05/27/2002 05/27/2003 Antenna Tower EMCO 1050 1113 05/27/2002 05/27/2003 RF Cable M17/75-RG214-NE N/A 05/27/2002 05/27/2003 Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 6 of 70 4. Test Configuration of EUT and Peripherals The system was configured for testing in a typical fashion ( as a customer would normally use it ) according to ANSI C63.4-1992, please see the photographs for detail. For system measurement, the EUT “150S4” were connected to: Description Brand/ Model No. Serial No. FCC ID Remark A Monitor PHILIPS 150S4 TY0209587 TY0209588 TY0209598 A3KM117 EUT B PC IBM Aptiva V66M 11S8138A FCC logo C Keyboard IBM KB-7993…

Text truncated - open the document above for the full version.

Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 66 of 70 9. Photographs of Test Set-up Conducted Emissions Test Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 67 of 70 Conducted Emissions Test Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 68 of 70 Radiated Emissions Test Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 69 of 70 Radiated Emissions Test Reference: TYR87-2034 150S4 Date: 04 December 2002 Philips Electronics Industries (Taiwan) Ltd Page: 70 of 70 10. Reference FCC part 15 - 1999 Radio frequency device. ANSI C63.4-1992, “American national standard for measurement of radio-noise emission from low-voltage electrical and electronic equipment in the range of 9KHz to 40GHz”