A3KM143Display Color Monitor

Product Information Product Features 200P6 200P6E z Outstanding front of screen performance {UXGA, 1600x1200 resolution for sharper display {Three signal input options for maximum display flexibility {16-ms response time for better display of moving images z Maximum comfort for maximum productivity {Display more images and content without scrolling {Screen pivot, better ergonomics and cable management {Built-in speakers for audio without desktop clutter {Stand-alone audio for efficient net conferencing z Best total cost of ownership solution {SmartManage provides LAN-based asset management capabilities {Lead-free design safeguards our environment z Great convenience {Easy plug-and-play DVI for a true digital experience {Embedded power supply eliminates external power adaptors 200P6I z Outstanding front of screen performance {UXGA, 1600x1200 resolution for sharper display {Three signal input options for maximum display flexibility {16-ms response time for better display of moving images z Maximum comfort for maximum productivity {Display more images and content without scrolling {Screen pivot, better ergonomics and cable management {Built-in speakers for audio without desktop clutter {Stand-alone audio for efficient net conferencing z Multi-function for ultimate convenience {Display from multiple video sources:S-Video and CVBS {PiP allows watching a second source simultaneously z Best total cost of ownership solution {SmartManage provides LAN-based asset management capabilities {Lead-free design safeguards our environment RETURN TO TOP OF THE PAGE Technical Specifications* LCD PANEL 2005-04-12file://N:\DFU\Philips\LCD\200P6_V.H6201\ENGLISH\200P6\product\product.htm • TypeTFT LCD • Screen size20.1" / 51cm • Pixel Pitch0.255 x 0.255mm • LCD Panel type 1600 x 1200pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated • Effective viewing area408 x 306mm • Display Colors8 bits interface (16M colors) SCANNING Vertical refresh rate56Hz-85Hz Horizontal Frequency30kHz-97kHz (Analog input) VIDEO • Video dot rate202.5 MHz • Input impedance - Video 75 ohm - Sync 2K2 ohm • Input signal levels0.7 Vpp • Sync input signal Separate sync Composite sync Sync on green • Sync polaritiesPositive and negative • S-VideoY input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance • CVBSComposite, 1.0Vpp, 75 ohm input impedance •Video interface D-Sub/DVI-A (Analog) DVI-D (Digital) AUDIO-IN • Input signal level0.7 Vpp • Headphone out signal level20mW x 2, 32 • Input signal connector3.5mm mini jack • Loudspeaker 4W Stereo Audio (2W/channel RMSx2, 200Hz-12kHz, 4 ohm,THD=10%) Optical characteristics • Contrast ratio: 400:1 (typ). • Brightness: 250 cd/m 2 (typ.) • Peak contrast angle6 o'clock • White Chromaticity: x: 0.283 y: 0.297 (at 9300°K) x: 0.313 y: 0.329 (at 6500°K) • Viewing Angle: Upper >88° (typ.) 2005-04-12file://N:\DFU\Philips\LCD\200P6_V.H6201\ENGLISH\200P6\product\product.htm * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes RETURN TO TOP OF THE PAGE Automatic Power Saving (C/R>10) Lower >88° (typ.) Left > 88° (typ.) Right > 88° (typ.) • Response time 16 ms (typ.) • Maximum 1600 x 1200 at 75Hz(analog input) 1600 x 1200 at 60Hz(digtal input) • Recommended 1600 x 1200 at 60Hz * at DVI digital input 37 user definable modes 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 (IBM VGA 10h) 31.5 720*400 70 31.5 640*480 60 37.5 640*480 75 35.2 800*600 56 37.9 800*600 60 46.9 800*600 75 48.4 1024*768 60 60.0 1024*768 75 60 1280*960 60 69.0 1152*870 75 63.9 1280*1024 60 80.0 1280*1024 75 75.0 1600*1200 60 93.8 1600*1200 75 (Analog only) 2005-04-12file://N:\DFU\Philips\LCD\200P6_V.H6201\ENGLISH\200P6\product\product.htm If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: RETURN TO TOP OF THE PAGE Physical Specifications * This data is subject to change without notice. * Resolution 1600 x 1200, standard size, contrast max., brightness 50%, 6500° K, full white pattern. RETURN TO TOP OF THE PAGE Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color Active ON Yes Yes < 70W Green Sleep OFF No No < 1.5W Amber Switch Off OFF- -< 1.5WOFF This monitor is ENERGY STAR ® compliant. As an ENERGY STAR ® Partner, PHILIPS has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. • Dimension (WxHxD) 461 x 438 x 214 mm (incl. Pedestal) (in lowest position) • Weight 9.85 Kg • Tilt / Swivel-5° ~ 25° / ± 65° • Power supply100— 240 VAC, 60 - 50 Hz • Power consumption 52 W* (typ.) • Temperature 5° C to 35° C (operating) -20° C to 60° C (storage) • Relative humidity 20% to 80% • System MTBF50K hrs (excluding CCFL 40K hrs) • Cabinet color 200P6IG/200P6EG: Light Gray 200P6IB/200P6EB: Black 200P6IS/200P6ES: Silver • Altitude - storage/shipment - operating 0 - 40,000 feet (12,192m) 0 - 12,000 feet (3657.6m) 2005-04-12file://N:\DFU\Philips\LCD\200P6_V.H6201\ENGLISH\200P6\product\product.htm Pin Assignment 1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table: 2. The 15-pin D-sub connector (male) of the signal cable: Pin No. Signal Assignment Pin No. Signal Assignment Pin No. Signal Assignment Pin No. Signal Assignment 1 T.M.D.S. Data2- 9 T.M.D.S. Data1-17T.M.D.S. Data0-C1* Analog R 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+18T.M.D.S. Data0+C2* Analog G 3 T.M.D.S. Data2 Shield 11 T.M.D.S. Data1 Shield 19 T.M.D.S. Data0 Shield C3* Analog B 4 NC 12 NC20NCC4* Analog H-syn 5 NC 13 NC21NCC5 * Analog GND (Analog R, G, return) 6 DDC Clock 14 +5V22 T.M.D.S. Clock Shield 7 DDC Data 15 Ground (return for +5V an…

Text truncated - open the document above for the full version.

1 SCALER MST6251A EEPROM M24C16 DDCSDA DDCSCL R/G/B CLK and R/G/B DATA (LVDS interface) CPU (128K) NT68F631A CLK: 12MHz IICSDAIICSCL HS/VS Connector to Audio & Ctrl Board Connector to Panel VIDEO Input LVDS Tx Panel_PWR 18V D-SUB DVISDA DVISCL RX0+/-, 1+/-,2+/-,RXC+/- for DVI-D DVI-I Connector to Power + Inverter BL_CTRL Brightness Adapter + Inverter Board Switching Frequency 60KHz LCD Panel 5V, 12V ,18V BL_CTRL, Brightness CCFL Line *6 DDR K4D263238A Video decode SAA7119 R/G/B/HS/VS for DVI-A CBVS S-Video 200P6 (with Video) Functional Block Diagram 200P6 (with Video) Functional Block Diagram CVBS S_YIN C_YIN DEC_clk DEC_data Circuit Description General 200P6 is the 6 th generation of Hudson series Flat Panel Display Monitor. It designed with LVDS interface feature. The monitor featured with DVI-I and analog signal input interface, and modularized as a display unit with embedded universal AC power supplies inside monitor main body. The monitor comes with super ergo base (SEB), the base is featured with tilt, swivel, height adjustment and portrait functionality. The power button and display control buttons (tact switch type) are on the front of the monitor. The monitor will be TCO03/TCO99 and Energy Star compliant and incorporate energy saving features described further in this document. The monitor shall support an internal scalar to automatically enable the monitor to display lower resolution video modes into 1600x1200 full screen display. The monitor shall communicate display data to the host computer using DDC2B and shall support EDID structure 1.3 for analog and digital signal input. 1. Power supply Main Voltage: AC 90 - 135 Vrms and 170 – 264 Vrms, 50/60 ± 2 Hz Power consumption: Operating < 60W (Max. w/o audio), Standby < 1.5W. DC power switch off < 1.5W. Power cord length: 1.8M Power cord type: 3 lead with earth plug Power indicator: LED (ON: blue, Standby: amber) Auto power saving: EPA, Nutek, VESA, DPMS, E2000 3. Input signal Horizontal scan: 30 - 97 KHz Vertical scan: 56 -85 Hz Input signals 1. Signal input level Video : 0.7 Vp-p linear / 75 ohms Sync : H/H+V, V TTL level, composite sync, sync on green Impedance Video : Terminated with 75 ohms Sync : Terminated with 2K2 ohms 2. CVBS Video :1Vp-p,75 Ohm 3. S-Video :Y-1Vp-p,75 ohms C-0.3Vp-p,75 ohms 4. Audio Signal : For S-terminal/ CVBS L/R audio input PC line audio in 4. OSD (On Screen Display) function Software control function via OSD/ Control as below: Analog Signal Input 1. Main Menu 2.1 Sub Menu 2.2 Sub Menu 2 MONITOR SETUP Exit Brightness & Contrast Brightness, Contrast Color Original Color, 9300K,6500K, sRGB User Define Red, Green, Blue Position Horizontal, Vertical Input Selection Analog (D-sub), Analog (DVI-A), Digital, CVBS, S-video More Settings Language English, Spanish, French, German, Italian, S. Chinese Phase/ Clock Phase, Clock OSD Setting Horizontal, Vertical Audio Option Stand-alone (On, Off) Mute (On, Off) Reset No, Yes Serial No.: (Serial No.) (Timing Mode) Move Selection Then ok Digital Signal Input 1. Main Menu 2.1 Sub Menu 2.2 Sub Menu 2 MONITOR SETUP Exit Brightness & Contrast Brightness, Contrast Color Original Color, 9300K,6500K, sRGB User Define Red, Green, Blue Size Full screen, Native mode, Fill with Aspect Input Selection Analog (D-sub), Analog (DVI-A), Digital, CVBS, S-video More Settings Language, English, Spanish, French, German, Italian, S.Chinese Phase/ Clock (Gray out) Phase, Clock (Gray out) OSD Setting Horizontal, Vertical Audio Option Stand-alone (On, Off) Mute (On, Off) Reset No, Yes Serial No.: (Serial No.) (Timing Mode) Move Selection Then ok Remark: Audio Selection - Stand-alone – On: Isolate video and audio control input Stand-alone – Off: Integrate video and audio control input Mute – On: Turn off Audio input Mute – Off: Turn on Audio input Reset - No: Exit. Yes: Auto adjustment for displaying timing mode and recall factory preset 5. LCD panel Type NR. : LM201U04 (LG.PHILIPS) Outside dimensions : 432.0(H) ∗ 331.5(V) ∗ 25(D) (Typ) mm Pixel Pitch ( mm ) : 0.255 mm x 0255mm Color pixel arrangement : RGB vertical stripes Display surface : low reflection, antiglare with hard coating Color depth : 16.7M colors (8 bits) Backlight : Six CCFL‘s Active area(WxH) : 408x306mm (20.1 diagonal) View angle : Horizontal & Vertical 160 degree (CR>=10) Contrast ratio : 400 :1 White luminance : Panel original color >200nits (min), 250 nits (Typ) 6. Function block 6.1 Scaler board Scaling (MST6251A (with video)/MST9251A (w/o video) including ADC, Scaler, OSD, LVDS) Analog - Monitor the input horizontal and vertical sync signal to judge input video mode - Sample the input video signal according to its pixel rate to form a digital data for panel. - Auto-adjustment for sampling phase and frequency, picture alignment and color alignment. - Send the parameters to format scaler IC according to the input mode. - Process the control data listed in OSD section. Digital - Monitor DVI input with internal TMDS receiver to judge input video mode - Sample the input video signal according to its pixel rate to form a digital data for panel. - Send the parameters to format scaler IC according to the input mode. - Process the control data listed in OSD section. MCU NT68F631A - Control Scaling and all I/Os port of monitor including audio. - Store the source code into internal Flash ROM and capable of down loading program via ISP. SAA7119 - Monitor CVBS and S-video input with internal multistandard video decoder to judge input video signal. - Sample the input video signal according to its pixel rate to form a digital data for scaler. - Send the parameters to format scaler IC according to the input mode. - Process the control data listed in OSD section. 6.2 Front panel switch control board - Used for OSD function and power on/off 7 push buttons (left, ok, right, up, down, auto, power switch) - Power on/off LED indicator 6.3 AC to DC Inverter Board board The AC power input from 90 VAC to 264 VAC, can generate 12V ,5Vand 18 VD…

Text truncated - open the document above for the full version.

Helen Zhao Subject: FW: FCC ID.: A3KM143 / New application for PHILIPS 200P6 4/19/2005 From: Jestonie Wu Sent: Thursday, April 14, 2005 5:54 PM To: Helen Zhao Subject: RE: FCC ID.: A3KM143 / New application for PHILIPS 200P6 Dear Helen, My answer are: Question #1: The internal photos show that audio cable is corporated with a clip-on ferrite core, but the test report (page 9) shows different. Please confirm and make necessary correction. 1) We will provide audio cable with one core on it when we ship out this set to customer because this cable with one core is common part to this product. 2) From our EMI experience that test results will be equal or better then original data when we add this core on audio cable to do test . Question #2: The test report shows postion 90 degree was investigated in test condition of D-Sub, 768*1024; in conducted emission testing, while in test condition of DVI, 1024*1280; in radiated emission testing. Please confirm whether max. resolution 1600 x 1280 is supported in postion 90 degree, and explain why you chose the lower resolution to conduct the test. 1) The max. resolution 1200 x 1600 is supported in position 90 degree also ( max. resolution 1600X1280 maybe typing error ) 2) The reason why we chose lower resolution to conduct the test as follows: - Radiation : a) Radiation Emission measured within Simple Anechoic Chamber to find which resolution is the worst one then take the worst one test again but change to position 90 degree . ( ref. to page 39 ) b) The reason we chose 1024 x 1280 /75Hz, 80KHZ (DVI ) to do 90 degree test is: 1200 x 1600/75Hz, 94KHz (D-Sub ) and 1024 x 1280 /75Hz, 80KHZ (DVI ) the worst one very closed, so we chose it but next time we will chose max. resolution if that worst one very closed ( ref. to Appendix I page 7 & 4 ) c) Finally , we chose three the worst resolution to do open site test ( ref. to page 39 ) . - Conduction a) Test resolution based on radiation emission measured within Simple Anechoic Chamber except in position 90 degree . b) To find the worst resolution then chose 768 x 1024 /75Hz, 60Khz to do test in position 90 degree. ( the worst value is 6.78 dB ref. to page 13 ) Best Regards, Jestonie Wu

Page 1 of 10 Exhibit 7 Photographs Front View Rear View Page 2 of 10 Front View (Rotate 90 ̊) Rear View (Rotate 90 ̊) Page 3 of 10 Label Rear View w/o Base

Page 3 of 10 Label Rear View w/o Base

Page 4 of 10 Rear View w/o Back Cover Shielding Cover Page 5 of 10 Assembly w/o Shielding Cover PCB Layout Page 6 of 10 PCB Layout PCB Layout Page 7 of 10 PCB Layout PCB Layout Page 8 of 10 PCB Layout Assembly w/o PCB Page 9 of 10 Plate LCD Panel Page 10 of 10 Power Cord and I/F Cables

FCC ID.A3KM143 Page 1 of 62 Audix Corporation. Report No. EM-F940068 TEST REPORT FOR CERTIFICATION On Behalf for Philips Electronics Industries (Taiwan) Ltd. Display Color Monitor Model No.: 200P6 FCC ID. : A3KM143 Brand : PHILIPS Prepared for : Philips Electronics Industries (Taiwan) Ltd. 5, Tze Chiang 1 Road, Chungli Industrial Park Chungli, Taoyuan, Taiwan, R.O.C. Prepared By : Audix Corporation Technical Division EMC Department No. 53-11, Tin-Fu Tsun, Lin-Kou, Taipei County, Taiwan, R.O.C. Tel : (02) 2609-9301, 2609-2133 Fax : (02) 2609-9303 File Number : EM940369 Report Number : EM-F940068 Date of Test : Mar. 24 ~ 26, 2005 Date of Report : Mar. 29, 2005 FCC ID.A3KM143 Page 2 of 62 Audix Corporation. Report No. EM-F940068 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION ......................................................................................................3 1. GENERAL INFORMATION..........................................................................................................4 1.1.Description of Device ................................................................................................................................ 4 1.2.Tested Supporting System Details............................................................................................................. 5 1.3.Description of Test Facility ....................................................................................................................... 7 1.4.Measurement Uncertainty.......................................................................................................................... 7 2. CONDUCTED EMISSION MEASUREMENT ............................................................................8 2.1.Test Equipment.......................................................................................................................................... 8 2.2.Block Diagram of Test Setup .................................................................................................................... 8 2.3.Limits for Conducted Emission (§15.107(a), Class B).............................................................................. 8 2.4.EUT‘s Configuration during Compliance Measurement ...........................................................................9 2.5.Operating Condition of EUT ..................................................................................................................... 9 2.6.Test Procedure ......................................................................................................................................... 10 2.7.Conducted Emission Measurement Results............................................................................................. 10 3. RADIATED EMISSION MEASUREMENT...............................................................................35 3.1.Test Equipment........................................................................................................................................ 35 3.2.Block Diagram of Test Setup .................................................................................................................. 35 3.3.Radiation Limit (§15.109/CISPR 22, Class B)........................................................................................ 37 3.4.EUT’s Configuration during Compliance Measurement ......................................................................... 37 3.5.Operating Condition of EUT ................................................................................................................... 37 3.6.Test Procedure ......................................................................................................................................... 37 3.7.Radiated Emission Measurement Results................................................................................................ 38 4. DEVIATION TO TEST SPECIFICATIONS ..............................................................................50 5. PHOTOGRAPHS...........................................................................................................................51 5.1.Photos of Conducted Eemission Measurement ....................................................................................... 51 5.2.Photos of Radiated Measurement at Simple Anechoic Chamber (30-1000MHz).............................................. 55 5.3.Photos of Radiated Measurement at Open Area Test Site (30-1000MHz).............................................. 59 5.4.Photos of Radiated Measurement at Open Area Test Site (1-2GHz) ...................................................... 61 APPENDIX I (Radiated Emission Test at Simple Anechoic Chamber) FCC ID.A3KM143 Page 3 of 62 Audix Corporation. Report No. EM-F940068 TEST REPORT CERTIFICATION Applicant : Philips Electronics Industries (Taiwan) Ltd. Manufacturer : Philips Electronics Industries (Taiwan) Ltd. Factory #1 : Skyway (Dong Guan) monitor Factory Factory #2 : Philips Consumer Electronics Co., of Suzhou Ltd. Factory #3 : Philips Ltd. Assembly Centre Hungary EUT Description : Display Color Monitor FCC ID. : A3KM143 (A) MODEL NO. : 200P6 (B) SERIAL NO. : TY0405022 (C) BRAND : PHILIPS (D) POWER SUPPLY : AC 100V-240V~ , 60-50Hz (E) TEST VOLTAGE : AC 120V/60Hz Measurement Standard Used: FCC CFR 47 Part 15 Subpart B/Jan. 2005 and CISPR 22/1997 ANSI C63.4-2003 The device described above was tested by Audix Corporation, to determine the maximum emission levels emanating from the device. The maximum emission levels were compared to the FCC Part 15 subpart B with the provisions of sections 15.107(a) and 15.109(a)(g) Class B limits both conducted and radiated emissions. The measurement results are contained in this test report and Audix Corporation is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT to be technically compliance with the FCC official limits.…

Text truncated - open the document above for the full version.

FCC ID.A3KM143 Page 51 of 62 Audix Corporation. Report No. EM-F940068 5. PHOTOGRAPHS 5.1. Photos of Conducted Emission Measurement Test Mode: Input Port- D-Sub or DVI, Panel Position-0°, H Pattern FRONT VIEW OF CONDUCTED MEASUREMENT BACK VIEW OF CONDUCTED MEASUREMENT FCC ID.A3KM143 Page 52 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- D-Sub, Panel Position-90°, H Pattern FRONT VIEW OF CONDUCTED MEASUREMENT BACK VIEW OF CONDUCTED MEASUREMENT FCC ID.A3KM143 Page 53 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- A/V or S, Image “DVD Movie” FRONT VIEW OF CONDUCTED MEASUREMENT BACK VIEW OF CONDUCTED MEASUREMENT FCC ID.A3KM143 Page 54 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- D-Sub+S, H Pattern + Image “DVD Movie” (PIP Mode) FRONT VIEW OF CONDUCTED MEASUREMENT BACK VIEW OF CONDUCTED MEASUREMENT FCC ID.A3KM143 Page 55 of 62 Audix Corporation. Report No. EM-F940068 5.2. Photos of Radiated Measurement at Simple Anechoic Chamber (30-1000MHz) Test Mode: Input Port- D-Sub or DVI, Panel Position-0°, H Pattern FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 56 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- DVI, Panel Position-90°, H Pattern FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 57 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- A/V or S, Image “DVD Movie” FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 58 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- D-Sub+S, H Pattern + Image “DVD Movie” (PIP Mode) FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 59 of 62 Audix Corporation. Report No. EM-F940068 5.3. Photos of Radiated Measurement at Open Area Test Site (30-1000MHz) Test Mode: Input Port- D-Sub or DVI, Panel Position-0°, H Pattern FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 60 of 62 Audix Corporation. Report No. EM-F940068 Test Mode: Input Port- D-Sub, 1600*1200/75Hz, 95kHz, Panel Position-0°, H Pattern SETUP WITH MAXIMUM DETECTED EMISSION AT HORIZONTAL POLARIZATION SETUP WITH MAXIMUM DETECTED EMISSION AT VERTICAL POLARIZATION FCC ID.A3KM143 Page 61 of 62 Audix Corporation. Report No. EM-F940068 5.4. Photos of Radiated Measurement at Open Area Test Site (1-2GHz) Test Mode: Input Port- D-Sub, 1600*1200/75Hz, 95kHz, Panel Position-0°, H Pattern FRONT VIEW OF RADIATED MEASUREMENT BACK VIEW OF RADIATED MEASUREMENT FCC ID.A3KM143 Page 62 of 62 Audix Corporation. Report No. EM-F940068 RADIATED MEASUREMENT RADIATED MEASUREMENT