A3KM120Color Monitor

Product Information Product Features • LightFrame™ for Windows • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 107P40: z 17-inch (16.0" VIS) Real Flat color monitor featuring ICE technology for excellent front of screen performance for use with MACs, PCs . z Autoscan covers horizontal frequencies up to 97 kHz offering a maximum resolution of 1920 x 1440 with flicker free display of 1024 x 768 up to 115 Hz z Flat aperture grille CRT with high-resolution 0.25 mm stripe pitch. z LightFrame™ for brightest and sharpest display of movie and photo windows. z Multimedia Base and USB Hub option z sRGB for true on screen color representation. z FCC, CE (in selected countries only) and ISO9241, ISO14001 certified RETURN TO TOP OF THE PAGE LightFrame™ for Windows Introduction Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT (picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and videos on the monitor screen. To control the LightFrame™ feature in your monitor, you have to install the LightFrame™ application which you will find on this CD-ROM. Note Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier Philips monitors or other manufacturers’ monitors will not work with this special software. It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame™ logo on the front of the monitor. This software is not designed for use with LCD flat screen monitors. LightFrame™ will work with true Windows-based programs and DOS-based programs that operate in a Windows environment. It will not work with DOS-based programs operating only in a DOS environment. Language Selection While English is the default language of LightFrame™, the User Interface can be set up to Exhibit 3 Installstion and Operating Instructions A: All Philips LightFrame™ 3 monitors display this logo on their front bezel: Q: How do I use the LightFrame™ 3 control bar that appears at the top my screen? A: The control bar is another upgrade that helps you run all LightFrame™ 3’s neat, new features. The illustration below describes the tasks each button performs. Accustomed to working with the original LightFrame™ tray icon? No problem: It’s still there and can be used to turn LightFrame™ on or off and check LightFrame™ status. RETURN TO TOP OF THE PAGE Technical Specifications* CRT • Size and deflection 17 inch / 41 cm ; 90° deflection angle • Grille pitch0.25 mm • Tube type Aperture grille, flat, high contrast, high brightness,anti- glare, anti-static, anti reflection, light transmission 38% • PhosphorB22 • Recommended display area12.0" x 9.0" / 306 x 230 mm * These information are subject to change without notice. RETURN TO TOP OF THE PAGE • Maximum display area12.8" x 9.6" / 325 x 244 mm SCANNING • Horizontal scanning30 - 97 KHz • Vertical scanning50-160 Hz VIDEO • Video dot rate203 MHz • Input impedance - Video75 ohm - Sync2.2 kOhm • Input signal levels0.7 Vpp • Sync input signal Separate sync • Sync polaritiesPositive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 degrees Kx = 0.283 / y = 0.297 • at 6500 degrees Kx = 0.313 / y = 0.329 • at 5500 degrees Kx = 0.332 / y = 0.347 sRGB sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen. Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD. To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK again. Exit this OSD. After this, please don't change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K. For more information on sRGB, please visit: www.srgb.com Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features: RETURN TO TOP OF THE PAGE Physical Specifications * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Power Management Definition VESA's Mode Video H-sync V-sync Power Used Power Saving (%) LED color ON Active Yes Yes Typical 77 W 0 % Green OFF Blanked No No < 2W 97% Yellow This monitor is ENERGY STAR® compliant. As an ENERGY STAR ® Partner, PHILIPS has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. • Dimensions 15.7" x 16.1" x 16.5" / 399 x 410 x 419 mm (including base) 15.7" x 14.7" x 16.5" / 399 x 373 x 419 mm (excluding base) • Weight17.5 kg • Power supply90 - 264 VAC, 50/60Hz • Temperature (operating)0° to 40°C / 32° to 104°F • Temperature (storage)-25° to +65°C / -13° to +149°F • Relative humidity(storage)5% to 95% * Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern. RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components. Front …

Text truncated - open the document above for the full version.

107P4 17" 92KHz BUS-DRIVER MONITOR H V V H S-Capacitor Switch Switching power fre q 30-80kHz +8 -13 R B Pre -Amp TDA4886A Post-Amp LM2435T OSD NOV 68275-00031 Rotation CRT CPU WT62P1/ DDC2B Linearity Control DAF/ SLA5094 S-Capacitor Horizontal Deflection Vertical TDA8172 Muting CKT Sync Processor TDA 4841 XXX EHT/UC3843A X-RAY MHR Ckt Power Supply TEA1507 + Degussing ckt Video /B DAC SCL SD +6.3 DAC HUNLOCK Main /B SDA/SCL FunctionKey/Control Board& LED109B2 Flyingcable 15pin D-sub G Video-E TDA4823 Exhibit 5 Block Diagram

FCC ID: A3KM120 Exhibit 7 Photographs Front View FCC ID: A3KM120 Rear View FCC ID: A3KM120 Label

Exhibit 2 FCC ID Label

FCC ID: A3KM120 Top View Without Back Cover FCC ID: A3KM120 Side View Without Back Cover FCC ID: A3KM120 Side View Without Back Cover FCC ID: A3KM120 Shielding FCC ID: A3KM120 CRT Assembly FCC ID: A3KM120 PCB Layout FCC ID: A3KM120 PCB Layout FCC ID: A3KM120 PCB Layout FCC ID: A3KM120 PCB Layout FCC ID: A3KM120 Metal Plate FCC ID: A3KM120 Power Cord and I/F Cables

The brief ckt. description of M40 109B4/109S4/107P4” Monitor 0. Functional Block Diagram 1. General Description 2. Description of Circuit Diagram A. Power Supply B. Horizontal Deflection/Vertical Deflection/EHT Generator C. Video board D. H / V convergence control E. Micro-controller & DDC 2B Exhibit 4 Brief Description of Circuit Functions 1. GENERAL DESCRIPTION The M40 platform includes 109B4 using 19” flat shadow mask CRT, 109S4 using 19”convention CRT and 107P4 using 17” flat CRT, they are so-called “Digital Controlled Auto-scan Color Display Monitor” with high resolution which can operate at horizontal scan frequency from 30kHz up to 97KHz, 92KHz and 92KHz for109B4, 109S4 and 107P4 respectively, and vertical scan frequencies can operate from 50 to 160 Hz. These monitors are equipped with an embedded micro-controller, which can preset the required modes, the M40 also provides many functions, such as digital adjustable picture, DDC2B, sRGB, LF3, low emission TCO99, high immunity, ---- etc. These monitors comply with TCO99 low emission standard and also fulfill E2000 automatic power saving requirements; to reduce power consumption less than 2 watts in power saving OFF mode, the monitor also can complies with VESA standard and energy star computer program initiated by the EPA. 2. DESCRIPTION OF CIRCUIT DIAGRAM This description mainly introduces the functions including power supply, horizontal / vertical deflection, video amplifier, micro-controller and H / V convergence control, etc. A. POWER SUPPLY The monitor is designed to adopt switching mode power supply which can operate mains input from 90VAC to 264VAC, this switching power supply apply an IC TEA1507 for SOPS controller. The control scheme transforms a switching converter from a voltage source into a multi-output voltage, the control concept is exhibited many desirable properties such as inherent over-load protection, stable and fast system response, the maximum output power capability is up to 110 watts for different models, then a power limiting circuit is added for different power delivery and safety reason, on main power supply circuit, secondary feedback via a photo-coupler is used to obtain a stable output voltage, the secondary outputs supply all necessary voltages for deflection and video and micro-controller. In order to meet new requirement of E2000 - power consumption less 2 watts @ off mode, The TEA1507 power supply is adopt, the power applies SOPS technology, not only supply the +5V to micro-controller & rest, and to be switched into burst mode via micro-controller for less 2 watts requirement @ off mode (actual measuring data is typical 1 watt) This monitor can save power consumption while no sync pulses and automatically recover to normal power on when sync signals are detected by micro-controller, the power saving off mode still exist in new designed monitors but suspend / stand-by mode are deleted due to pattern infringement issue, but still reserve them for the option and future implementation required. B. HORIZONTAL DEFLECTION / VERTICAL DEFLECTION / EHT GENERATOR HORIZONTAL DEFLECTION: The heart of horizontal/vertical deflection controller is TDA4841, which can offer a complete and efficient small signal sync processing for auto-sync monitors, all functions are controlled via I2C bus. This controller provides sync processing, which can accept separate input signals, a very short settling time after mode change for protection of external power components has been taken into account. The TDA4841 provides extensive functions like a flexible B+ controller block of H-deflection and a geometry control with facilities, leading to excellent picture quality, this device also can directly drive the vertical deflection output stage, the line driver stage, the E/W output stage and all controls are tracked with the incoming frequencies, picture can be adjusted along horizontal direction by OSD H-shift control, the horizontal size, east/west, trapezoid corrections are obtained by varying the supply voltage of H- deflection circuit via buck converter, five capacitors plus power MOSFET switches and DC controlled linearity coil are designed for optimal screen linearity. VERTICAL DEFLECTION: The majority of vertical deflection function is integrated by two ICs: TDA4841 and TDA8172. The TDA4841 takes care of sync polarity correction, automatic catching and holding of the vertical oscillator, generation of saw-tooth drive current for vertical output and vertical s-correction, and generation of a correct V-blanking pulse for video blanking during vertical retrace lines. The TDA8172 is a DC-coupled vertical deflection booster with differential input signals is suitable for color monitor. The output stage has thermal and soar protection, and high linear saw-tooth signal amplification to obtain the required vertical deflection current. EHT GENERATOR The IC UC3843AN is used as a controller to generate required extra high voltage for CRT, the transformer(LOT) transfers the voltage to required anode voltage and rest tertiary output voltage. The adjustable focus (G3) and screen (G2) voltages are internally derived from the anode voltage, other secondary windings are used to generate the voltages for G1, also provides dynamic focus on G4 to get a good focus performance. (G4 is also adjustable). For safety reasons, x-ray protection circuit is included, that UC3843AN will feed fold the EHT generator if the anode voltage exceeds a certain value (27—29.5kV), this circuit is also used for over beam current protection, it will feed fold the EHT in case the total beam current can not exceeds a certain value. C. VIDEO AMPLIFIER VIDEO AMPLIFIER: The video circuit mainly consists of Light Frame IC TDA4823, pre-amplifier TDA4886A, post amplifier LM2435T and DC restoration circuit and OSD IC Novatek 68275-00031 the video DC level and gain at cathode are controlled via I2C bus & software. The red, green and blue video signals are amplified by pre-ampl…

Text truncated - open the document above for the full version.

Philips Electronics Industries (Taiwan) Ltd - EMC Lab. 5, Tze Chiang 1 Road, Chungli Industrial Park, Chungli, Taoyuan, Taiwan Tel.: +886-3-454-9862 Fax.: +886-3-454-9887 E-mail: [email protected] FCC Test Report Report No.: TYR87-2037 Date : 14 January, 2003 Page : Page 1 of 32 Customer : Philips Electronics Industries Name : Mr. S.T. Huang – EE LCD Address : 5, Tze Chiang 1 Road, Zip/City : Chungli Industrial Park, Country : Chungli, Taiwan, R.O.C. Equipment Under Test (including peripherals) : FCC ID. : A3KM120 Model Name : 107P40 Serial Number : TY0211705 Description : 17” XGA color monitor, Max. resolution 1600x1200/75Hz EMC Standards : FCC Part 15 of October 01,1999 Class B ANSI C63.4-1992 Result : PASSED the limits/test-levels in the standards. Note : The results in this report apply only to the sample(s) and mode(s) tested. It is the manufacturer’s responsibility to assume the continued EMC compliance of production models. Date of receipt of EUT : 27 Dec. 2002 Date of performance of test : 28 Dec., 2002 to 02 Jan., 2003 NVLAP Signatory Philips Electronics Industries (Taiwan) Ltd This report shall not be reproduce except in full, without written approval of the testing laboratory C.C. Wu - EMC Test Engineer Ronnie Yang - EMC Manager Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 2 of 32 Table of contents 1. Summary of test results.............................................................................3 2. General information of EUT.......................................................................4 3. Test equipment.......................................................................................5 4. Test configuration of EUT and peripherals......................................................6 5. Test procedure.......................................................................................7 6. Measurement uncertainty...........................................................................9 7. Conducted emissions test..........................................................................10 8. Radiated emissions test............................................................................19 9. Photographs of test set-up.........................................................................28 10. References...........................................................................................32 Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 3 of 32 1. Summary of test results Test Standard Result Note Emission, ANSI C63.4-1992 Conducted emission Radiated emission FCC Part 15 FCC Part 15 Passed Passed Remark: The test sample fully complies with the requirements set forth in : FCC Part 15 Class B. Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 4 of 32 2. General Information of EUT The EUT, 17” color monitor : Model No. : 107P40 FCC ID : A3KM120 Brand : Philips The color monitor automatically scans horizontal frequencies between 30KHz and 97KHz , and vertical frequencies between 50Hz and 160Hz. This color monitor displays sharp and brilliant images of text and graphics with a maximum resolution up to 1600x1200 pixels. The monitor has 8 factory-preset modes as indicated in the following table: Item Resolution Freq. V x H Pixel rate(Mhz) Remark 1 640x480 75(37.500k) 31.500 VESA 2 800x600 75(46.875k) 49.500 VESA 3 800x600 85(53.674k) 56.250 VESA 4 1024x768 75(60.000k) 78.750 VESA 5 1024x768 85(68.677k) 94.500 VESA 6 1280x1024 75(79.976k) 135.000 VESA 7 1280x1024 85(91.146k) 157.500 VESA 8 1600x1200 75(93.750k) 202.500 VESA Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 5 of 32 3. Test Equipment Test equipment used for line Conducted and Radiated emissions as following. All equipment were calibrated according to ANSI C63.4-1992 and ISO-9000 requirement unless otherwise specified. Traceability to R.O.C. and international standards is assured by using calibrated all equipment. - For Conducted Emissions Test: Test Equipment Model No. Serial No. Last Calibrate Next Calibrate Spectrum HP8568B 2928A04640 06/27/2002 06/27/2003 EMI Receiver R & S ESVS30 841977/006 06/13/2002 06/13/2003 LISN EMCO 3825/2 9311-2153 06/13/2002 06/13/2003 LISN EMCO 3825/2 9311-2154 06/13/2002 06/13/2003 RF Cable 8-meter N/A 05/29-2002 05/29/2003 - For Radiated Emissions Test: Test Equipment Model No. Serial No. Last Calibrate Next Calibrate Spectrum HP8568B 2928A04640 06/27/2002 06/27/2003 RF Preselector HP85685A 2620A00338 06/27/2002 06/27/2003 QP Adapter HP85650A 2811A01324 06/27/2002 06/27/2003 EMI Receiver R & S ESVS30 841977/006 06/13/2002 06/13/2003 Biconical Antenna EMCO 3110B 3222 06/04/2002 06/04/2003 Biconical Antenna EMCO 3110B 3224 06/04/2002 06/04/2003 Log-Periodic Antenna EMCO 3146A 1424 06/04/2002 06/04/2003 Log-Periodic Antenna EMCO 3146A 1425 06/04/2002 06/04/2003 Turn Table EMCO 1060 1068 05/27/2002 05/27/2003 Antenna Tower EMCO 1050 1113 05/27/2002 05/27/2003 RF Cable M17/75-RG214-NE N/A 05/27/2002 05/27/2003 Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 6 of 32 4. Test Configuration of EUT and Peripherals The system was configured for testing in a typical fashion ( as a customer would normally use it ) according to ANSI C63.4-1992, please see the photographs for detail. For system measurement, the EUT “107P40” were connected to: Description Brand/ Model No. Serial No. FCC ID Remark A Monitor Philips 107P40 TY0211705 A3KM120 EUT B PC IBM Aptiva V66M 11S8138A FCC logo C Keyboard IBM KB-7993 0017954 FCC Logo D Mouse IBM 12J3619 23-034616 DZL211120 E Modem Hayes 231AA A22231081770 BFJ9D9308US F Printer HP 2225C 2934S55406 DSI6XU2225 Connected Cables No. Description Manufacturer Length Shielded Remark 1 Power Cord Long Shine 1.8 meters No for EUT 2 Power Cord Acer 1.8 meters No for PC 3 Power Cord …

Text truncated - open the document above for the full version.

Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 28 of 32 9. Photographs of Test Set-up Conducted Emissions Test Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 29 of 32 Conducted Emissions Test Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 30 of 32 Radiated Emissions Test Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 31 of 32 Radiated Emissions Test Reference: TYR87-2037 107P40 Date: 14 January 2003 Philips Electronics Industries (Taiwan) Ltd Page: 32 of 32 10. Reference FCC part 15 - 1999 Radio frequency device. ANSI C63.4-1992, “American national standard for measurement of radio-noise emission from low-voltage electrical and electronic equipment in the range of 9KHz to 40GHz”