A7RM2A3ADVD/VCR

Serial Number IMPORTANT NOTE TO THE CUSTOMER: In the space below, enter the serial number for your television (located on the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. For model: HR-XVC1U DVD/VIDEO CASSETTE RECORDER USER’S GUIDE ¤ T V / V C R C H + TV VCR DVD POWER DVD MENU MARKERRETURN OPEN/ CLOSE DISPLAYA.TRK C.RESET ZERO RETURN SUB TITLE ANGLE SEARCH MODE SP/EP PLAY MODE ZOOM TITLE REPEAT A-B TV POWER INPUT TV VOL 0 TIMER TV/VCR R E W PLAY F F R E C STOP P A U S E SKIP /INDEX SKIP /INDEX T V / V C R C H — SETSET ENTER/ SELECT SET UP MENU CANCEL O S D A.MONITOR S L O W S K IP S E A R C H VCR/DVD/TV 2 WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION:TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT A JVC AUTHORIZED SERVICE CENTER. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. Location of the required Marking The rating sheet and the safety caution are on the rear of the unit. CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient mag- nitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompa- nying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION:Changes or modifications not expressly approved by the partly responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. 3 CH. IN OUT ANT. DIGITAL AUDIOAUDIOS-VIDEOCOMPONENT DVD OUTPUT L R VIDEO OPTICALCOAXIAL AUDIO L R 4 ( ) TV ( ) Y PB/CB PR/CR 3 Important safeguards 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only. 6. ATTACHMENTS The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards. 7. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 8. ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. 8A.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. VENTILATION Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 11. G…

Text truncated - open the document above for the full version.

ATTACHMENT J-1 FCC ID: A7RM2A3A FCC IDENTIFIER (♣2.926) LABELING REQUIREMENT(♣15.19) --- Labeling BACK VIEW

Test report No. : 22CE0026-KT-1 Page : 2 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Contents Page Section 1 : Client information 3 Section 2 : Equipment under test (E.U.T.) 3 Section 3 : Test specification, methods & procedures 5 Section 4 : Operation of E.U.T. during tests 6 Section 5 : Summary of test results 8 Section 6 : Test instruments 10 Section 7 : Conducted interference 11 Section 8 : Radiated emission 14 Section 9 : Antenna terminal voltage 18 Section 10 : RF output level / spurious emission 19 Section 11 : Antenna transfer switch 20 Section 12 : Picture sensitivity 21 Section 13 : Noise figure 22 Appendix 1 : Photographs of test set up 23 Appendix 2 : Data of EMI tests 31 Test report No. : 22CE0026-KT-1 Page : 3 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 1 : Client information Company name : ORION ELECTRIC CO., LTD. Brand Name : JVC Address : 41-1 Iehisa-cho, Takefu-shi, Fukui 915-8555 JAPAN Telephone number : +81-778-23-0019 Facsimile number : +81-778-23-7799 Contact person : Hiroshi Tsujimoto Section manager Engineering headquarters Administration section Section 2 : Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of equipment : DVD/VCR Model number : HR-XVC1U Rating : AC 120 V / 60 Hz Manufacturer : 1. WORLD ELECTRIC (THAILAND) LTD. 236 Moo 2 Nongchark, Banbung, Chonburi 20170, Thailand 2. KORAT DENKI LTD. 149 Moo 10 Thombol Chokchai, Amphur Chokchai, Nakhonratchasima 30190, Thailand 3. ORION AMERICA, INC. Hwy 41 North, Orion Place, Princeton, Indiana 47670, U.S.A Receipt Date of Sample : October 19, 2001 Condition of EUT : Production Prototype Test report No. : 22CE0026-KT-1 Page : 4 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 2.2 Product description ORION ELECTRIC CO., LTD., Model: HR-XVC1U (referred to as the EUT in this report) is a DVD/VCR. The EUT specifications is as follows. Tuner type : Quartz PLL frequency synthesized I / F : 45.75 MHz (Picture), 41.25 MHz (Sound) Receiving channel : VHF 2 – 13 ch / UHF 14 – 69 ch / CATV 1 – 125 ch Antenna input : 75 ohm Video signal : NTSC color Power source : AC 120 V / 60 Hz Operation: 120W Stand by: 8W I / O terminal (Video) : RCA in 1Vp-p 75 ohm, RCA out 1 Vp-p 75 ohm I / O terminal (Audio) : RCA in –8 dB 50 k ohm, RCA out –8 dB 1 k ohm 2.3 Similar apparatus HR-XVC1UC Test report No. : 22CE0026-KT-1 Page : 5 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 3 : Test specification, methods & procedures 3.1 Test specification Test specification : FCC Part 15 Subpart B Title : FCC 47 CFR Part15 Radio Frequency Device Subpart B Unintentional Radiators (Subpart C Intentional Radiators) 3.2 Methods & procedures No. Item Test procedure Limits Remarks 1 Conducted interference ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 250 uV LISN 2 Radiated emission ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 30–88 MH: 100 uV/m 88–216 MHz: 150 uV/m 216–960 MHz: 200 uV/m above 960 MHz: 500 uV/m 3 m 3 Antenna terminal voltage ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 2 nW (at 75 ohm) – RF output level Video signal: 3000 uV Aural signal: 671 uV – 4 Spurious emission ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 94.8 uV – 5 Transfer switch ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 9.5 dB – 6 Picture sensitivity ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 8 dB – 7 Noise figure FCC/OET MP:2:1986 14 dB – 3.3 Additions or deviations to standard No addition, deviation or exclusion has been made from standards. Test report No. : 22CE0026-KT-1 Page : 6 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 4 : Operation of E.U.T. during tests 4.1 Operating modes The EUT exercise program used during testing was designed exercise the various system components in a manner similar to typical use. The sequence in used : * Receive mode (0 dBmV input / 25 dBmV input) * AV input mode (1 Vp-p input / 5 Vp-p input) * VCR playback mode * DVD play mode Operation : The EUT tested above operation mode (Using a video tape with a typical TV signal recorded on it, if necessary.) Just ification : The system was configured in typical fashion (as a customer would normally use it) for testing. 4.2 Configuration and peripherals Front View A B 50k ohm terminator 50k ohm terminator 75 ohm terminator Audio in Audio in Video in * Cabling was taken into consideration and test data was taken under worse case conditions. Top View AC 120 V / 60 Hz 2 1 Video in Audio in A Audio in RF in RF out Video out Audio out Audio out Component Y Component Pb Component Pr S-Video out Audio out Audio out Digital Audio out 75 ohm terminator 50 k ohm terminator 50 k ohm terminator 75 ohm terminator 75 ohm terminator 1k ohm terminator 1k ohm terminator 75 ohm terminator 75 ohm terminator 75 ohm terminator 75 ohm terminator 1k ohm terminator 1k ohm terminator 75 ohm terminator 75 ohm terminator Front Back * Cabling was taken into consideration and test data was taken under worse case conditions. Test report No. : 22CE0026-KT-1 Page : 7 …

Text truncated - open the document above for the full version.

Test report No. : 22CE0026-KT-1 Page : 31 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Appendix 2 : Data of EMI tests This section contains the following data. Page 32 to Page 43 : Conducted interference Page 44 to Page 58 : Radiated emission Page 59 to Page 60 : Antenna terminal voltage Page 61 to Page 78 : RF output level / spurious emission Page 79 to Page 86 : Antenna transfer switch Page 87 : Picture sensitivity Page 88 : Noise figure

Test report No. : 22CE0026-KT-1 Page : 23 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Appendix 1 : Photographs of test set up This section contains the following photographs. Page 24 : Test set up of conducted interference Page 25 : Test set up of radiated emission Page 26 : Test set up of antenna terminal voltage Page 27 : Test set up of RF output level / spurious emission Page 28 : Test set up of antenna transfer switch Page 29 : Test set up of picture sensitivity Page 30 : Test set up of noise figure Test report No. : 22CE0026-KT-1 Page : 24 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Conducted interference Test report No. : 22CE0026-KT-1 Page : 25 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Radiated emission Test report No. : 22CE0026-KT-1 Page : 26 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Antenna terminal voltage Test report No. : 22CE0026-KT-1 Page : 27 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 RF output level / spurious emission Test report No. : 22CE0026-KT-1 Page : 28 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Antenna transfer switch Test report No. : 22CE0026-KT-1 Page : 29 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Picture sensitivity Test report No. : 22CE0026-KT-1 Page : 30 of 88 Date of issue : November 5, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Noise figure