VRB1351A_EN_01_0504.6.14, 10:25 AM1 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN D1-4-2-3_En IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1_En Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. D8-10-2_En NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_En CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. D1-4-2-1_En CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. D8-10-3a_En This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. D8-10-1-3_EF VRB1351A_EN_01_0504.6.14, 10:25 AM2 READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS — All operating and use instructions should be followed. CLEANING — The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS — Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE — Do not use this product near water — for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES — Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. CART — A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. VENTILATION — Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. POWER SOURCES — This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION – The appliance should be installed in a stable location. NONUSE PERIODS – The power cord of the appliance should be unplugged from the outlet when left un-used for a long period of time. GROUNDING OR POLARIZATION • If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. • If this product is equipped with a three-wire grounding type plug, a pl…

Text truncated - open the document above for the full version.

Users Manual

Playback 05 41 En Changing soundtrack language / Sub- titles DVD-Video Note •If the desired language is not heard after pressing the button several times, the language is not recorded on the disc. •Changing soundtrack or subtitle language is cancelled when you open the disc tray. The initial default language or available language will be heard and seen if the disc is played back again. •Depending on the DVD you may be unable to turn on, turn off, or change the subtitles, even if they are recorded on the disc. While playing the DVD, the subtitles may change while opening or closing the disc tray, or while changing the title. •In some cases, the subtitles language is not changed to the selected one immediately. Changing soundtrack language You can select the language when you play a multilin- gual disc. 1 Press AUDIO during playback. The current soundtrack language will appear. 2 Press AUDIO repeatedly until the desired language is selected. The on-screen display will disappear after a few seconds. Turning the subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during playback until “Subtitle OFF” appears. Changing the subtitle language You can select the language when playing back a disc recorded with multilingual subtitles. Press SUBTITLE repeatedly during playback until your desired language appears. The on-screen display will disappear after a few seconds. VRB1351A_EN_33_4604.6.14, 10:28 AM41 Playback 05 42 En The CD Track Info screen CD This section describes the TRACK INFO screen where music CDs can be played back using the various operations. Note •In case the disc includes more than 10 tracks, you can turn to the next or the previous page. Press , then press or to display next/previous page. To return to normal use, press . •You cannot switch to the VCR mode when the TRACK INFO screen is showing. Press TITLE MENU/TOP MENU to clear the TRACK INFO screen, then press DVD/VCR to switch to the VCR mode. Preparation: •Turn ON the TV and set to the video input mode. •Load the music CD. •Press DVD/VCR to select the DVD mode. (The DVD indicator will light.) Press TITLE MENU/TOP MENU. The TRACK INFO screen will appear. TRACK 02 TRACK 03 TRACK 04 TRACK 05 TRACK 06 TRACK 07 TRACK 08 TRACK 09 TRACK 10 TRACK 01 TRACK 01 00:00:19/00:03:54 00:00:19/00:45:28 MODE: NORMAL REPEAT: OFF TRACK INFO ENTER/ SELECT RETURNPLAYBACKEND SELECT SET TITLE MENU The elapsed time and total time of the music data (during playback) Scroll bar The elapsed time and total time of the whole CD Current playback mode The track number during playback The music data recorded on the CD Press . The menu list will appear. TRACK 02 TRACK 03 TRACK 04 TRACK 05 TRACK 06 TRACK 07 TRACK 08 TRACK 09 TRACK 10 TRACK 01 Track 01 00:00:19/00:03:54 00:00:19/00:45:28 Mode: NORMAL REPEAT: OFF TRACK INFO ENTER/ SELECT RETURNENTERBACKEND SELECT TITLE MENU SET PLAY HIDE/SHOW RANDOM PLAY REPEAT TRACK REPEAT ALL PROGRAM PLAYBACK TIME SEARCH PLAY Menu list Playing back a selected track 1 Press or to select the track number you want to playback and press . 2 Press or to select “PLAY” from the menu list and press ENTER. The selected track will be played back. Excluding specified track 1 During stop, press or to select the track number you do not want to playback and press . 2 Press or to select “HIDE/SHOW” from the menu list and press ENTER. The selected track will not be played back. (“H” appears at the side of the track number.) When you want to cancel the exclusion, press or to select the track number with “H” and press . Press or to select “HIDE/SHOW” from the menu list and press ENTER, “HIDE” will be cancelled. VRB1351A_EN_33_4604.6.14, 10:28 AM42 Playback 05 43 En Random, repeat and program play CD Note •“RANDOM PLAY” and “TIME SEARCH” will not appear in the menu list for CD-R/CD-RW discs containing MP3 or WMA files. Random playback 1 Press or to select “RANDOM PLAY” from the menu list and press ENTER. 2 Press PLAY. Music is played back in random order. To cancel random playback, select “RANDOM PLAY” from the menu list again, and press ENTER. Repeat playback of selected track 1 Press or to select the track number you want to repeat and press . 2 Press or to select “REPEAT TRACK” from the menu list and press ENTER. 3 Press PLAY. The selected track will be played back repeatedly. To cancel repeat track playback, select “REPEAT TRACK” from the menu list again, and press ENTER. Repeat playback of all tracks 1 Press or to select “REPEAT ALL” from the menu list and press ENTER. 2 Press PLAY. All tracks on CD will be played back repeatedly. To cancel the repeat all playback, select “REPEAT ALL” from the menu list again, and press ENTER. Playing back programs You can specify the playback order yourself. 1 Press or to select “PROGRAM PLAYBACK” from the menu list and press ENTER. 2 Press or to select to the track number that you want to change the order of and press ENTER. The “” mark will appear at the right side of the track number. 3 Press or to select to the track number that you want to specify and press ENTER. The track number that you select in step 2 moves to the position that you specified. 4 Repeat steps 2 and 3 to change the playback order. 5 Press PLAY. The tracks will be played back in the changed order. To cancel program playback, select “EXIT PROGRAM MODE” from the menu list and press ENTER. Playing back track by specifying the time 1 Press or to select “TIME SEARCH” from the menu list during playback and press ENTER. 2 Press / or / to specify the elapsed time of the track (this will be the starting point of playback) and press ENTER. Playback will start from the specified elapsed time. VRB1351A_EN_33_4604.6.14, 10:28 AM43 Playback 05 44 En MP3/WMA/JPEG playback CD MP3 and WMA files can be played back. Also, you can display JPEG files on the TV screen and enjoy them as a slide show. Some discs…

Text truncated - open the document above for the full version.

Users Manual

Editing 07 71 En 4 Press PLAY to search a scene where you want to add the chapter mark. • Search the scene by using each operation button (F.FWD, REW, SKIP +, SKIP -, PAUSE/STILL, SLOW, CM SKIP) for the playback. ENTER/ SELECT RETURNENTERBACKEND TITLE MENU ADD CHAPTER MARK NAME11/25/2003 08:41 AM CHAPTER1/3 LENGTH00:02:03/00:30:17 7% 5 At the point in the scene you want to add the chapter mark, press ENTER. The playback is paused and the position of the added chapter mark appears green. ADD CHAPTER MARK 17% NAME11/25/2003 08:41 AM CHAPTER2/4 LENGTH00:03:08/00:30:17 The added chapter mark 6 If you want to continue to add chapter marks, repeat step 5. • To display the title menu, press RETURN. • To return to the normal screen, press TITLE MENU. Note •Chapter marks that have been added automatically in the erasing of a scene procedure (page 73) cannot be erased. VRB1351A_EN_63_7104.6.14, 10:29 AM71 Editing 07 72 En 1 Press TITLE MENU to display the title menu. 2 Select the original titles where you want to combine the chapters. • Press or to select the original title. • Press to display the editing menu of original title. • Press or to select “COMBINE CHAPTERS”. ENTER/ SELECT RETURNENTERBACK SET END SELECT TITLE MENU DISC NAME:–––– 11/23/2003 08:41AM 006 SLP 11/25/2003 10:03PM 011 SP 11/29/2003 11:30AM 009 SP 12/01/2003 06:52PM 006 XP Family REC DATE :11/23/2003 TIME:08:41AM LENGTH:00:30:17 CHANNEL :06 REC MODE :EP PLAY COMBINE CHAPTERS EDIT TITLE DELETE TITLE RENAME TITLE NEW PLAYLIST ADD CHAPTER MARK TITLE MENU 3 Press ENTER. The COMBINE CHAPTERS screen will appear. At the beginning, the top still image in the chapter 2 is displayed. SELECT ENTER/ SELECT RETURNENTERBACKEND TITLE MENU COMBINE CHAPTERS NAME11/25/2003 10:03 PM CHAPTER2/4 LENGTH00:02:03/00:30:17 Combining chapters VR mode By erasing the added chapter marks, the chapters can be combined. 4 Press SKIP + or SKIP - to select the chapter marks to be erased. 5 Press ENTER. The chapter marks are erased and 2 chapters are combined into 1 chapter. 6 To continue erasing chapter marks, repeat steps 4 and 5. • To display the title menu, press RETURN. • To return to the normal screen, press TITLE MENU. Changing an original title name VR mode Video mode DVD-R You can only add title names to DVD-R and Video mode discs before they have been finalized. 1 Press TITLE MENU to display the title menu. 2 Select the original title that you want to rename. • Press or to select the original title. • Press to display the editing menu of original title. • Press or to select “RENAME TITLE”. ENTER/ SELECT RETURNENTERBACK SET END SELECT TITLE MENU DISC NAME:–––– 11/23/2003 08:41AM 006 SLP 11/25/2003 10:03PM 011 SP 11/29/2003 11:30AM 009 SP 12/01/2003 06:52PM 006 XP Family REC DATE :11/23/2003 TIME:08:41AM LENGTH:00:30:17 CHANNEL :06 REC MODE :EP TITLE MENU PLAY ADD CHAPTER MARK COMBINE CHAPTERS EDIT TITLE DELETE TITLE RENAME TITLE NEW PLAYLIST RENAME TITLE 3 Press ENTER. The keyboard screen will appear. The entering method of the title name is the same as for the playlist. See the steps 4 and 5 of “Changing a title name” in “Editing a playlist” (page 65) and enter the title name. Note • The title name can be a maximum of 64 characters in VR mode and a maximum of 30 characters in Video mode. Long names will be shortened in the title menu. VRB1351A_EN_72_8004.6.14, 10:30 AM72 Editing 07 73 En Erasing a scene (Edit title) VR mode You can erase an unnecessary scene from the original title. Erase the scene after checking the title. You cannot restore the erased scene. When you erase the scene, you can increase the disc space. Note •If the scene is erased from the original title, the created playlist is erased. •Disc space will only be freed up if scenes lasting several minutes are deleted. •A chapter mark is automatically added at the location of the erased scene. Chapter marks are erased if you combine chapters. 1 Press TITLE MENU to display the title menu. 2 Select the original title where a scene you want to erase is included. • Press or to select the original title. • Press to display the editing menu of original title. • Press or to select “EDIT TITLE”. ENTER/ SELECT RETURNENTERBACK SET END SELECT TITLE MENU DISC NAME:–––– 11/23/2003 08:41AM 006 SLP 11/25/2003 10:03PM 011 SP 11/29/2003 11:30AM 009 SP 12/01/2003 06:52PM 006 XP Family REC DATE :11/23/2003 TIME:08:41AM LENGTH:00:30:17 CHANNEL :06 REC MODE :EP TITLE MENU PLAY ADD CHAPTER MARK COMBINE CHAPTERS EDIT PROGRAM DELETE TITLE RENAME TITLE NEW PLAYLIST EDIT TITLE 3 By pressing ENTER, the following message screen will appear. 4 Press or to select “YES” and press ENTER, then the EDIT TITLE screen will appear. • By selecting “NO”, the title menu appears. 5 The method for erasing a scene is the same as for the playlist. See the steps 4 to 9 of “Erasing scenes (Edit title)” in “Editing a playlist” (page 66). VRB1351A_EN_72_8004.6.14, 10:30 AM73 Editing 07 74 En Erasing an original title VR mode You can erase an original title. Erasing the title deletes both the title and the recording saved under that title name. Since the erased title cannot be restored, please make sure that it contains nothing you want to keep. When you erase the title, you can increase the disc space. Note •If the original title is erased the created playlist is also erased. 1 Press TITLE MENU to display the title menu. 2 Select the original title you want to erase. • Press or to select the original title. • Press to display the editing menu of original title. • Press or to select “DELETE TITLE”. ENTER/ SELECT RETURNENTERBACK SET END SELECT TITLE MENU DISC NAME:–––– 11/23/2003 08:41AM 006 SLP 11/25/2003 10:03PM 011 SP 11/29/2003 11:30AM 009 SP 12/01/2003 06:52PM 006 XP Family REC DATE :11/23/2003 TIME:08:41AM LENGTH:00:30:17 CHANNEL :06 REC MODE :EP TITLE MENU PLAY ADD CHAPTER MARK COMBINE CHAPTERS EDIT TITLE DELETE TITLE RENAME TITLE NEW PLAYLIST DELETE TITLE 3 By pressing ENTER, the followi…

Text truncated - open the document above for the full version.

ID Label/Location Info

ATTACHMENT J-1 FCC ID: A7RM2D3B FCC IDENTIFIER (2.926) LABELING REQUIREMENT(15.19) --- Labeling BACK VIEW

Test Report

DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF CONDUCTION TEST CHART UL Apex Co., Ltd. YOKOWA No.1 SHIELD TEST ROOM DATA OF RADIATION TEST UL Apex Co., Ltd. Yokowa EMC No.2 Open Test Site COMPANY : Orion Electric Co., Ltd.REPORT No.: 24KE0259-YW-1 EQUIPMENT : DVD-RW/VCR REGULATION: FCC PART15 B MODEL No. : DVR-RT500-STEST DISTANCE: 3m POWER : AC120V/60HzATTENUATION: 101-847MHz 6dB DESCRIPTION : TV Reception+Rec 1030-1694MHz 0dB DATE: June 26, 2004 TEMP./HUMID. : 27 ENGINEER : Tsubasa Takayama *C.Factor[dB]=ANT Factor + Cable Loss - Amp Gain For the measurement above 1GHz, measurement of AV detector is performed only when the result of PK detector exceed the limit of AV. CH.FREQ READING(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m] VHF 210126.726.1BC-11.015.715.143.527.828.4 20222.2 22.3 BC-4.018.218.343.525.325.2 303LO-5.946.0 404LO-4.246.0 505LO-1.146.0 606LO0.946.0 707LO2.746.0 808LO4.246.0 909LO5.846.0 READING(PK) READING(AV)ANTC.FactorLIMITLIMIT HOR.VER.HOR.VER.TYPEHOR.VER.HOR.VER.[PK][AV]HOR.VER.HOR.VER. [dBuV] [dBuV][dBuV] [dBuV/m][dBuV/m][dBuV/m][dB][dB] 1010HO-12.074.054.0 1111HO-11.474.054.0 1212HO-10.974.054.0 1313HO-10.474.054.0 1414HO-9.874.054.0 1515HO-9.274.054.0 1616HO-8.374.054.0 CH.FREQ READING(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m] 310724.524.3BC-10.014.514.343.529.029.2 21422.322.3BC-3.818.518.543.525.025.0 321LO-5.646.0 428LO-3.546.0 535LO-0.546.0 642LO1.546.0 749LO3.346.0 856LO4.746.0 963LO7.854.0 READING(PK) READING(AV)ANTC.FactorLIMITLIMIT HOR.VER.HOR.VER.TYPEHOR.VER.HOR.VER.[PK][AV]HOR.VER.HOR.VER. [dBuV] [dBuV][dBuV] [dBuV/m][dBuV/m][dBuV/m][dB][dB] 1070HO-11.774.054.0 1177HO-11.174.054.0 1284HO-10.574.054.0 1391HO-9.974.054.0 1498HO-9.474.054.0 1605HO-8.474.054.0 CH.FREQ READING(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m] 411324.224.5BC-8.815.415.743.528.127.8 226BC-3.746.0 339LO-5.446.0 452LO-2.746.0 565LO0.046.0 678LO2.246.0 791LO4.046.0 904LO5.646.0 READING(PK) READING(AV)ANTC.FactorLIMITLIMIT HOR.VER.HOR.VER.TYPEHOR.VER.HOR.VER.[PK][AV]HOR.VER.HOR.VER. [dBuV] [dBuV][dBuV] [dBuV/m][dBuV/m][dBuV/m][dB][dB] 1017HO-11.974.054.0 1130HO-11.374.054.0 1243HO-10.774.054.0 1356HO-10.174.054.0 1469HO-9.574.054.0 1582HO-8.674.054.0 [dBuV/m] RESULT(PK)RESULT(AV)MARGIN(PK)MARGIN(AV) [dB] 15.0 MARGIN(AV) [dB] MARGIN(QP) [dBuV/m] RESULT(PK)RESULT(AV)MARGIN(PK) RESULT(PK)RESULT(AV)MARGIN(PK)MARGIN(AV) [dBuV/m][dB] MARGIN(QP)RESULT(QP) [dBuV/m] [dBuV/m] RESULT(QP) [dBuV/m] [dB] RESULT(QP)MARGIN(QP) >27.0 [dB] >15.0 >10.0 >27.0>10.0 [dB] 15.0 >27.0>10.0 DATA OF RADIATION TEST UL Apex Co., Ltd. Yokowa EMC No.2 Open Test Site COMPANY : Orion Electric Co., Ltd.REPORT No.: 24KE0259-YW-1 EQUIPMENT : DVD-RW/VCR REGULATION: FCC PART15 B MODEL No. : DVR-RT500-STEST DISTANCE: 3m POWER : AC120V/60HzATTENUATION: 101-847MHz 6dB DESCRIPTION : TV Reception+Rec 1030-1694MHz 0dB DATE: June 26, 2004 TEMP./HUMID. : 27 ENGINEER : Tsubasa Takayama *C.Factor[dB]=ANT Factor + Cable Loss - Amp Gain For the measurement above 1GHz, measurement of AV detector is performed only when the result of PK detector exceed the limit of AV. CH.FREQ READINNG(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m][dB][dB] VHF 512325.124.5BC-7.517.617.043.525.926.5 246BC-3.546.0 369LO-4.746.0 492LO-1.546.0 615LO0.946.0 738LO3.246.0 861LO5.046.0 984LO8.554.0 READINNG(PK) READINNG(AV)ANTC.FactorLIMITLIMIT HOR.VER.HOR.VER.TYPEHOR.VER.HOR.VER.[PK][AV]HOR.VER.HOR.VER. [dBuV] [dBuV][dBuV] [dBuV/m][dBuV/m] [dBuV/m][dB][dB][dB][dB] 1107HO-11.474.054.0 1230HO-10.874.054.0 1353HO-10.274.054.0 1476HO-9.574.054.0 1599HO-8.474.054.0 CH.FREQ READINNG(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m][dB][dB] 612925.625.1BC-7.018.618.143.524.925.4 258BC-3.146.0 387LO-4.446.0 516LO-1.046.0 645LO1.546.0 774LO3.746.0 903LO5.646.0 READINNG(PK) READINNG(AV)ANTC.FactorLIMITLIMIT HOR.VER.HOR.VER.TYPEHOR.VER.HOR.VER.[PK][AV]HOR.VER.HOR.VER. [dBuV] [dBuV][dBuV] [dBuV/m][dBuV/m] [dBuV/m][dB][dB][dB][dB] 1032HO-11.974.054.0 1161HO-11.274.054.0 1290HO-10.574.054.0 1419HO-9.874.054.0 1548HO-8.974.054.0 1677HO-7.774.054.0 CH.FREQ READINNG(QP)ANTC.FactorLIMIT HOR.VER.TYPEHOR.VER.[QP]HOR.VER. [MHz] [dBuV][dBuV][dBuV/m][dB][dB] 722123.423.2BC-3.819.619.446.026.426.6 442LO-3.146.0 6…

Text truncated - open the document above for the full version.

Test Report

Test report No. : 24KE0259-YW-1 Page : 3 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Section 1 : Client information Company name : Orion Electric Co., Ltd. Address : 41-1 Iehisa-cho, Takefu-shi, Fukui-ken, 915-8555 JAPAN Telephone number : +81 778 23 0019 Facsimile number : +81 778 23 7799 Contact person : Hiroshi Tsujimoto Section 2 : Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of equipment : DVD-RW/VCR Brand Name : Pioneer Model number : DVR-RT500-S Rating : AC 120 V / 60 Hz Manufacturer : 1. World Electric (Thailand) Ltd. 236 Moo 2 Nongchark, Banbung, Chonburi 20170, Thailand 2. Korat Denki Ltd. 149 Moo 10 Tambol Chokchai, Amphur Chokchai, Nakhonratchasima 30190, Thailand 228 Moo 3 Tambol Nongbuasala, Amphur Muang, Nakhonratchasima 30000, Thailand 3. Orion America, Inc. Hwy 41 North, Orion Place, Princeton, Indiana 47670, U.S.A Receipt Date of Sample : June 22, 2004 Condition of EUT : Production Prototype (Not for Sale: This sample is equivalent to mass-produced items.) 2.2 Product description Model: DVR-RT500-S (referred to as the EUT in this report) is a DVD-RW/VCR. The EUT specifications is as follows. Tuner type : Quartz PLL frequency synthesized I / F : 45.75 MHz (Picture), 41.25 MHz (Sound) Receiving channel : VHF 2 – 13 ch / UHF 14 – 69 ch / CATV 1 – 125 ch Antenna input : 75 ohm Video signal : NTSC color Power source : AC 120 V / 60 Hz, 27W I / O terminal (Video) : RCA in 1Vp-p 75 ohm, RCA out 1 Vp-p 75 ohm I / O terminal (Audio) : RCA in –8 dB 47 k ohm, RCA out –8 dB 1 k ohm 2.3 Similar apparatus There are similar apparatuses as follows; DVR-RT300-S

Test Setup Photos

Test report No. : 24KE0259-YW-1 Page : 20 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Conducted emission Test report No. : 24KE0259-YW-1 Page : 21 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Radiated emission Test report No. : 24KE0259-YW-1 Page : 22 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Antenna terminal voltage Test report No. : 24KE0259-YW-1 Page : 23 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 RF output level / spurious emission Test report No. : 24KE0259-YW-1 Page : 24 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Antenna transfer switch Test report No. : 24KE0259-YW-1 Page : 25 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Picture sensitivity Test report No. : 24KE0259-YW-1 Page : 26 of 138 Date of issue : July 6, 2004 UL Apex Co., Ltd. Yokowa EMC Lab. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: +81 596 39 1485 Facsimile: +81 596 39 0232 Noise figure