A7RM4C9HVideo Cassette Recorder

2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- FIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the interference by one or more of the following measures: - - - - Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. CAUTION: ENGLISH 4C93401A-E(C-09)04.10.99, 12:172 3 ENGLISH READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. ATTACHMENTS Do not use attachments not recommended by the unit's manufacturer as they may cause hazards. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in built-in installa- tions such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug If your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 1. 2. 3. 4. 5. 6. 7. 8. 8A. 9. 10. 11. IMPORTANT SAFEGUARDS S3125A PORTABLE CART WARNING (symbol provided by RETAC) 4C93401A-E(C-09)04.10.99, 12:173 4 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care…

Text truncated - open the document above for the full version.

ABC D E F GH ABC D E F GH 21345678 21345678 DATE: TEC-HQ TEC-HQ SEC. PUBRICATION: DISTRIBUTE: SECTION: ORION ELECTRIC CO.LTD DWG.NO. FUNCTION CHKD BYDET.CHKD BYDRAWN BYDESIGN BY : ISSU Rev.No: PCB NAME STANDARDMODELDESCRIPTION VMX187 1.0 7654321 7654321 BLADE WIDE BLACKWHITE 21 CD501 AC120V_60Hz TU6001 10111213 1415161718 2 21222324 25 26 27 28 34568 9 987645321 CP4001 654321 CP4002 654321 21 CP4003 21 CP4003 87654321 87654321 DANS LA NOMENCLATURE DES PIECESN’UTILISER QUE CELLS DECRITESDANGEREUSES AN POINT DE VUE SECURITE ETANT LES PIECES REPAREES PAR UN ATTENTION: OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE THE TIME THIS INTERCONNECTION DIAGRAM IS THE LATEST AT NOTE: DESCRIBED IN PARTS LIST ONLYCRITICAL FOR SAFETY,USE ONES ARE SINCE THESE PARTS MARKED BY CAUTION: 4321 CP101 4321 CP1003 4321 CP651 4321 CP602 VE8859PCB270 OPE PCB J4203 HIFI FRONT JACK AUDIO IN (R)AUDIO IN (L) VIDEO IN INTERCONNECTION DIAGRAM P2 02/29/2000 H.TAKAYAMAM.HAMANO CP1001 FG FG.PG GND PG VCC DRV GND CYL VCC 5V GND CYL VCC 5V GND CYL PGCYL +BCYL FGCYL GND CYL DRIVE CYL GNDCYL PGCYL +BCYL FG CYL DRIVE GND 9 M4C9INV1 DRIVE CONTROL VCC MICRO MOTOR M2003 CD4001 FFC VE8851 VE8852PCB550 PCB550 CD601 FFC CD1002 FFC GNDGND GND KEY B KEY BKEY A KEY A TO OS651 COMMAND TRANSMITTER TM601 DATA B+ TM601 OS651 FROM GND J4201 REAR OUT JACK AUDIO OUT(R)VIDEO OUTAUDIO OUT(L) 4 ch3 ch SW6001 RF SW CP501 21 H5002 FULL ERASE HEAD ASS’Y FE HEAD (HOT)FE HEAD (GND) FE HEAD (HOT)FE HEAD (GND) SP COM HF2 (L) HF COM EP/LP COM SP-CH2 (L)SP-CH1 (R) HF1 (R) EP/LP-CH2 (L)EP/LP-CH1 (R) VCCBOTLDM-LDM+ VCCBOT LDM-LDM+ AE HEAD(+)AE HEAD(-) CTL-CTL+ AUDIO REC AUDIO PB VMX187 SYSCON PCB PCB010 FFC CD1001 BOT PCB LOADING MOTOR PCB M101 LOADING MOTOR LM Q101 BOT SENSOR WHITERED FR OUT FR IN NCNC BMDATACLOCKCEPB 5VTU 32V (RF AGC) (BT) CE CLOCK DATA BM PB 5V NC NC TU 32V IF TP IF OUT A.IN V.INA.INMBCHCONTROL CHMB V.IN CONTROL NC SIF OUT SIF OUT AFT A.OUT AFT CP1002 UN4001 CAPSTAN DD UNIT V.OUT EP/LP HEAD HI-FI HEAD SP HEAD AND RF CONVERTER TUNER,DEMODULATOR V.OUT 321987546 CYLINDER UNIT AE HEAD(+)AE HEAD(-) AE AUDIO CONTROL CTL-CTL+ AUDIO REC AUDIO PB H5001 HEAD AUDIO CONTROL ASS’Y M2001 G O VCC MR FG SENSOR ROTOR MAGNET COIL MAIN HALL SENSOR LOGIC SWITCH OUT IN HALL VCCHALL VCC(5V) CAP.M F/R FG VCO(12V) CTL I LIMIT MOTOR GND M4C9-A2A,B NTSC A 1 UL/FCC INTERCONNECTION

A-pex International Co., Ltd. KANTO OFFICE EMC LAB. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho Kanagawa-ku, Yokohama-shi Kanagawa-ken 221-0031 JAPAN Telephone:int +81 45 450 1515 Facsimile:int +81 45 450 1534 EMC TEST REPORT Test Report No. : 19D0031-04-1 Applicant:ORION ELECTRIC CO., LTD. Type of Equipment:Video Cassette Recorder Model No.:W501 Test Standard:FCC Part 15 Subpart B Test Result:Complies This report may be reproduced in full, partial reproduction may only be made with the written consent the laboratory. The results in this report apply only to the sample tested. Te ste d by: Hisayuki Kioka Approved by: Toshihiro Ikegami Manager of EMC Section A-PEX INTERNATIONAL CO., LTD. Date of test: April 18 to May 6, 2000 Issued date: May 18, 2000 Test report No.: 19D0031-04-1 Page: 2 of 40 Issued date: May 18, 2000 A-pex International Co., Ltd. KANTO OFFICE EMC LAB. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho Kanagawa-ku, Yokohama-shi Kanagawa-ken 221-0031 JAPAN Telephone:int +81 45 450 1515Facsimile:int +81 45 450 1534 CONTENTS PAGE SECTION 1: CLIENT INFORMATION 3 SECTION 2: EQUIPMENT UNDER TEST (E.U.T.) 3 SECTION 3: TEST SPECIFICATION , METHODS & PROCEDURES 5 SECTION 4: OPERATION OF E.U.T. DURING TESTING 6 SECTION 5: SUMMARY OF TEST RESULTS 7 SECTION 6: TEST EQUIPMENT USED 9 SECTION 7: CONDUCTED INTERFERENCE 10 SECTION 8: RADIATED EMISSION 11 SECTION 9: ANTENNA TERMINAL VOLTAGE 13 SECTION 10: RF OUTPUT LEVEL / SPURIOUS EMISSION 15 SECTION 11: TRANSFER SWITCH 16 SECTION 12: INPUT LEVEL CONTROL 17 SECTION 13: PICTURE SENSITIVITY 18 SECTION 14: NOISE FIGURE 19 SECTION 15: ADJACENT CHANNEL INTERFERENCE 20 SECTION 16: IMAGE CHANNEL INTERFERENCE 21 SECTION 17: DIRECT PICK-UP INTERFERENCE 23 SECTION 18: TUNER OVER LOAD 25 APPENDIX 1:TEST CONFIGURATION PHOTOGRAPHS 27 APPENDIX 2:DATA OF EMI TEST 40 Test report No.: 19D0031-04-1 Page: 3 of 40 Issued date: May 18, 2000 A-pex International Co., Ltd. KANTO OFFICE EMC LAB. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho Kanagawa-ku, Yokohama-shi Kanagawa-ken 221-0031 JAPAN Telephone:int +81 45 450 1515Facsimile:int +81 45 450 1534 SECTION 1: CLIENT INFORMATION Company Name:ORION ELECTRIC CO., LTD. Address:41-1 Iehisa-cho, Takefu-shi, Fukui 951-8555 JAPAN Telephone Number:+81-778-23-0019 Facsimile Number:+81-778-23-7799 Contact Person: Hiroaki Ozaki SECTION MANAGER Engineering Headquarters Administration Section SECTION 2: EQUIPMENT UNDER TEST (E.U.T.) 2.1Identification of E.U.T. Unique Type Identification: Video Cassette Recorder Model No.: W501 FCC ID: A7RM4C9H Serial No.: - Country of Manufacture: JAPAN Test report No.: 19D0031-04-1 Page: 4 of 40 Issued date: May 18, 2000 A-pex International Co., Ltd. KANTO OFFICE EMC LAB. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho Kanagawa-ku, Yokohama-shi Kanagawa-ken 221-0031 JAPAN Telephone:int +81 45 450 1515Facsimile:int +81 45 450 1534 2.2P roduct Description ORION ELECTRIC CO., LTD., Model: W501 (referred to as the EUT in this report) is a Video Cassette Recorder. The EUT specifications is as follows. Tuner Type : 181 channel Freq. Synthesized I/F :45.75MHz (Picture), 41.25MHz (Sound) Receiving Channel : VHF 2-13ch / UHF 14-69ch CATV 1 4 - 3 6 (A) - (W) / 3 7 - 5 9 (AA) - (WW) / 6 0 - 8 5 (AAA) - (ZZZ) 86 - 94 (86) - (94) / 95 - 99 (A-5) - (A-1) / 100 - 125 (100) - (125) / 01 (5A) Antenna Input : 75 ohm Video Signal : NTSC Color Power Source : AC120V/60Hz, 75W I/O Terminal (VIDEO) : RCA IN 1Vp-p 75ohm, RCA OUT 1Vp-p 75ohm I/O Terminal (AUDIO) : RCA IN -8dB/50k ohm, RCA OUT -8dB/1k ohm Clock Frequency :10 MHz (System Control / Servo Control Microcomputer Clock 3. 579545 MHz (Chrominance Subcarrier Oscillator) 150 - 320 kHz (Switching Frequency of Power Supply) RF Converter :US 3CH (Visual Carrier 61.25 MHz, Aural Carrier 65.75 MHz) US 4CH (Visual Carrier 67.25 MHz, Aural Carrier 71.75 MHz) 2.3Similar Apparatus This EUT has some similar apparatus. The model name is as follows. Nothing Test report No.: 19D0031-04-1 Page: 5 of 40 Issued date: May 18, 2000 A-pex International Co., Ltd. KANTO OFFICE EMC LAB. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho Kanagawa-ku, Yokohama-shi Kanagawa-ken 221-0031 JAPAN Telephone:int +81 45 450 1515Facsimile:int +81 45 450 1534 SECTION 3: TEST SPECIFICATION, METHODS & PROCEDURES 3.1Test Specification Basic standard: FCC Part 15 Subpart B : Radiated Frequency Devices - Unintentional Radiators Test Methods: ANSI C63.4 : 1992 : Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 3.2 Methods & Procedures No. ItemTest RequirementsTest ProcedureLimits 1 Conducted Interference FCC Part 15 Subpart B Sec. 15.107 (a) ANSI C63.4 1992250uV 2 Radiated Emission FCC Part 15 Subpart B Sec. 15.109 (a), 15.115 (a) 15.118 (d) ANSI C63.4 199230 -88MHz: 100uV/m 88 - 216MHz: 150uV/m 216 - 960MHz: 200uV/m above 960MHz: 300uV/m 3 Antenna Terminal Voltage FCC Part 15 Subpart B Sec. 15.111 (a), 15.118 (c) ANSI C63.4 19922nW (at 75 ohm) RF Output Level Video Signal : 3000uV Aural Signal : 671uV 4 Spurious Emission FCC Part 15 Subpart B Sec. 15.115 (b) ANSI C63.4 1992 94.8 uV 5 Transfer SwitchFCC Part 15 Subpart B Sec. 15.115 (c) ANSI C63.4 19923uV 6 Input Level Control FCC Part 15 Subpart B Sec. 15.115 (d) -Not change (Modulation) 7 Picture SensitivityFCC Part 15 Subpart B Sec. 15.117 (f) ANSI C63.4 1992Difference : 8dB 8 Noise FigureFCC Part 15 Subpart B Sec. 15.117 (g) ANSI C63.4 199214dB 9 Adjacent Channel Interference FCC Part 15 Subpart B Sec. 15.118 (c)-1 ANSI C63.4 199254 - 804 MHz : 55dB 10 Image Channel Interference FCC Part 15 Subpart B Sec. 15.118 (c)-2 ANSI C63.4 199254 - 714 MHz : 60dB 714 - 804 MHz : 50dB 11 Direct Pick-up Interference FCC Part 15 Subpart B Sec. 15.118 (c)-3 ANSI C63.4 199245dB (Ave. 50dB) 12 Tuner Over LoadFCC Part 15 Subpart B Sec. 15.118 (c)-4 ANSI C63.4 199254 - 550 MHz : 55dB 550 - 804 MHz : 51 dB Test report No.: 19D0031-04-1 Page: 6 of 40 Issued date: …

Text truncated - open the document above for the full version.

ABC D E F GH ABC D E F GH 21345678 21345678 DATE: TEC-HQ TEC-HQ SEC. PUBRICATION: DISTRIBUTE: SECTION: ORION ELECTRIC CO.LTD DWG.NO. FUNCTION CHKD BYDET.CHKD BYDRAWN BYDESIGN BY : ISSU Rev.No: PCB NAME STANDARDMODELDESCRIPTION VMX187 1.0 7654321 7654321 BLADE WIDE BLACKWHITE 21 CD501 AC120V_60Hz TU6001 10111213 1415161718 2 21222324 25 26 27 28 34568 9 987645321 CP4001 654321 CP4002 654321 21 CP4003 21 CP4003 87654321 87654321 DANS LA NOMENCLATURE DES PIECESN’UTILISER QUE CELLS DECRITESDANGEREUSES AN POINT DE VUE SECURITE ETANT LES PIECES REPAREES PAR UN ATTENTION: OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE THE TIME THIS INTERCONNECTION DIAGRAM IS THE LATEST AT NOTE: DESCRIBED IN PARTS LIST ONLYCRITICAL FOR SAFETY,USE ONES ARE SINCE THESE PARTS MARKED BY CAUTION: 4321 CP101 4321 CP1003 4321 CP651 4321 CP602 VE8859PCB270 OPE PCB J4203 HIFI FRONT JACK AUDIO IN (R)AUDIO IN (L) VIDEO IN INTERCONNECTION DIAGRAM P2 02/29/2000 H.TAKAYAMAM.HAMANO CP1001 FG FG.PG GND PG VCC DRV GND CYL VCC 5V GND CYL VCC 5V GND CYL PGCYL +BCYL FGCYL GND CYL DRIVE CYL GNDCYL PGCYL +BCYL FG CYL DRIVE GND 9 M4C9INV1 DRIVE CONTROL VCC MICRO MOTOR M2003 CD4001 FFC VE8851 VE8852PCB550 PCB550 CD601 FFC CD1002 FFC GNDGND GND KEY B KEY BKEY A KEY A TO OS651 COMMAND TRANSMITTER TM601 DATA B+ TM601 OS651 FROM GND J4201 REAR OUT JACK AUDIO OUT(R)VIDEO OUTAUDIO OUT(L) 4 ch3 ch SW6001 RF SW CP501 21 H5002 FULL ERASE HEAD ASS’Y FE HEAD (HOT)FE HEAD (GND) FE HEAD (HOT)FE HEAD (GND) SP COM HF2 (L) HF COM EP/LP COM SP-CH2 (L)SP-CH1 (R) HF1 (R) EP/LP-CH2 (L)EP/LP-CH1 (R) VCCBOTLDM-LDM+ VCCBOT LDM-LDM+ AE HEAD(+)AE HEAD(-) CTL-CTL+ AUDIO REC AUDIO PB VMX187 SYSCON PCB PCB010 FFC CD1001 BOT PCB LOADING MOTOR PCB M101 LOADING MOTOR LM Q101 BOT SENSOR WHITERED FR OUT FR IN NCNC BMDATACLOCKCEPB 5VTU 32V (RF AGC) (BT) CE CLOCK DATA BM PB 5V NC NC TU 32V IF TP IF OUT A.IN V.INA.INMBCHCONTROL CHMB V.IN CONTROL NC SIF OUT SIF OUT AFT A.OUT AFT CP1002 UN4001 CAPSTAN DD UNIT V.OUT EP/LP HEAD HI-FI HEAD SP HEAD AND RF CONVERTER TUNER,DEMODULATOR V.OUT 321987546 CYLINDER UNIT AE HEAD(+)AE HEAD(-) AE AUDIO CONTROL CTL-CTL+ AUDIO REC AUDIO PB H5001 HEAD AUDIO CONTROL ASS’Y M2001 G O VCC MR FG SENSOR ROTOR MAGNET COIL MAIN HALL SENSOR LOGIC SWITCH OUT IN HALL VCCHALL VCC(5V) CAP.M F/R FG VCO(12V) CTL I LIMIT MOTOR GND M4C9-A2A,B NTSC A 1 UL/FCC INTERCONNECTION