A7RM4F1BVideo Casette Recorder

R VIDEO CASSETTE RECORDER OWNER’S MANUAL Before operating the unit, please read this manual thoroughly. VCR4510D TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV (Cable TV), set this menu option to the "TV" mode. ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. 4C83101B(C-09)9*9*99, 10:321 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- FIED SERVICE PERSONNEL. CAUTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment. - - - - 4C83101B(C-09)9*9*99, 10:332 3 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. ATTACHMENTS Do not use attachments not recommended by the unit's manufacturer as they may cause hazards. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in built-in installa- tions such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug If your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 1. 2. 3. 4. 5. 6. 7. 8. 8A. 9. 10. 11. IMPORTANT SAFEGUARDS S3126A PORTABLE CART WARNING (symbol provided by RETAC) 4C83101B(C-09)9*9*99, 10:333 4 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. LIGHTNING To protect your unit from a lightning storm, or when it…

Text truncated - open the document above for the full version.

ABC D E F GH ABC D E F GH 21345678 21345678 DATE: TEC-HQ TEC-HQ SEC. PUBRICATION: DISTRIBUTE: SECTION: ORION ELECTRIC CO.LTD DWG.NO. FUNCTION CHKD BYDET.CHKD BYDRAWN BYDESIGN BY : ISSU Rev.No: PCB NAME STANDARDMODELDESCRIPTION VMA224A_D 5 M4F1-01BNTSC C.POOWASORNW.WANPEN UL/FCC 05/30/2001 CAUTION: DIGITAL TRANSISTOR Q4003 KRA103RTK SW CP4001TOC-C09X-A1 123456 789 CP4002IMSA-9604S-06Z13 123456 CP4003TMC-T02X-E1 12 DURING PLAYBACKMEASURED WITH THE DIGITAL TESTER NOTE: THE DC VOLTAGE AT EACH PART WAS OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME C4034 4.725VKA C4014 22 6.3V KA C4012 22 6.3V KA C4004 2206.3VYK C4045 1006.3VKA C4035 150VKA C4025 220 6.3V YK C4009 476.3VKA C4027 336.3VKA C4031 150VKA T4001 1626009 COIL,BIAS OSC 123 4 56 C4074 0.001 B C4066 0.022 B C4016_1 0.068 B C4002 0.022100VMKT C40190.047 F C4015 0.047 F C4033 0.0012 B C4054 0.1 F C4069 0.1 F C4006 0.015 B C4005 0.01B C4020 0.1 F C4021 0.1 F C4059 0.1 F C4061 0.01 B C4070 0.1 F C4060 0.01 B C4044 0.1 B C4038 180P CH C4036 390P B C4037 0.1 F C4032 0.0027 B C40290.01 B C4013 0.1 B C4057 10P CH C4064 0.022 B C4028 0.1 F R4046 22K R405310K 1/4W R4001 560 R4021 18K R4023 33K R4038 680K R4037 1K R4033 2.2K 1/4W R4010 3.3K R4014 4.7K R4016 5.6K R4043 3.3K R4011 22K R4006 47K R4007 47K R4004 15 1/4W R4035 100K R4034 82K R4002 10K R4003 10K R4024 5.6K R4018 8.2K R4019 330K R4025 1.5K R4047 12K 1/4W R4012 1K R4020 180 1/4W R4045 12K 1/4W R4044 22K R4042 1.5K R4039 8.2K R4017 8.2K R4036 1.8K R4041 1.8K R4022 820 C4051 22 6.3V KA C4050 0.22 50V KA C4063 4716VYK C4010 47 6.3V KA C4030 1016VKA C4046 1 50V KA C4067 150VKA C4065 150VKA C4058 47 6.3V KA C4062 150VKA C4052 1 50V KA C4048 1 50V KA C4049 1 50V KA C4053 1 50V KA Q4001 KTC3198 AUDIOPB SW Q4002 KTC3198 -AT(Y,GR} AUDIOPB SW Q4006 KTC3203_Y BIAS OSC Q4012 2SC2412K BUFFER Q4011 2SC2412K BUFFER TP4001 V.ENV W801 Q4010 2SA1037AK BUFFER Q4005 KTA1266BIAS CTL X4001 100CT3R508 L4003 100uH 0305 L4001 22uH 0305 IC4001 LA71201M-N-MPB Y/C/AUDIO/CCD/HEAD AMP IC 1 10111213141516 17 18 19 2 20 212223242526272829 3 30313233343536373839 4 40 41 42 43 44 45 46 47 48 49 5 50 51 52 53 54 55 56 57 58 59 6 60 616263646566676869 7 70717273747576777879 8 80 9 L4004 22uH L4005 47uH L4006 47uH RECORD COLOR SIGNALRECORD LUMINANCE SIGNAL PLAYBACK COLOR SIGNALPLAYBACK LUMINANCE SIGNALAUDIO SIGNAL(PB)AUDIO SIGNAL(REC)TUNER VIDEO SIGNAL H.SW ENV.DET COMP H.AMP_SW C.ROTARY Y/C_CS IIC_DATA IIC_CLK P.CON+5V P.CON+5V AUDIO_MUTE-H FSC P.CON+5V {2,3,4,5} GND {2,3,4,5} FSC {5}FRONT_V_IN {5}FRONT_A_IN-L {5}TUNER_V {5}TUNER_A {5}FROM_NORMAL_A {5} 4FSC 4FSC {2}IIC_CLK {2}IIC_DATA {2}Y/C_CS {2}DUMMY_V.SYNC {2}V.REC_ST-H {2}C.ROTARY {2}AUDIO_MUTE-H {2}OSD_V {2}CTL- {2} P.CON+5V CTL+ {2}H.AMP_SW {2} TUNER_V COMP {2}ENV.DET {2}H.SW {2} FRONT_V_IN C.SYNC {2} OSD_V TUNER_A C.SYNC P.CON+5V DUMMY_V.SYNC FRONT_A_IN-L P.CON+5V P.CON+5V V.REC_ST-H CTL+CTL- FROM_NORMAL_A GNDHOT FROM/TO SYSCON/SERVO FROM/TO TUNER K.MURATA W.PHON 5 1 NC NC NC FROM/TO HEAD AUDIO CONTROL NCNC Y/C/AUDIO/CCD/HEAD AMP SCHEMATIC DIAGRAM (SYSCON PCB) FE HEAD(GND)FE HEAD(HOT) TO FE HEAD AUDIO PB AE HEAD(+) CTL-CTL+ AUDIO REC AE HEAD(-) 00 0.7 0.7 00 5 5.3 0 5.2 FROM/TO CYL EP/LP-CH2 (L)EP/LP-CH1 (R) SP-CH2 (L)SP-CH1 (R) EP/LP COM 0 0 0 2 5.2 0 5.2 1 3 NC 4 + Vref 2.3V SP,LP EQ AMP ALCALC A-VCC 123 A-GND HA PRE GND R P P R P P H L H L REC:LP<EP PB:EP DET PB,EE PB,EE VREF REC AMP MUTE AUTO BIAS LINE AMP REC FM-EQ FM AGC VHS SOPB P R PB FM EQ P R S-EQ MAIN DE-EM LIM DOUBBLE FM DEM SUB LPF B S DET EMPHA FIL MAIN 4.7K Y-VCC V.SYNC SEP SEP 6DB QV/QH AGC TC2 BAL TC1 REG 4V 12 3 VDD 4Fsc CLOCK PLL TIMMING OUT DRIVER AUTO-BIAS CLAMP CCD VSS OUT IN VCA VCA CLAMP VCP ALWAYS 5V B VX01 320FH VCO SLD PHASE EQ fo-ADJ PHASE EQ Q-ADJ FM AGC FIL Y-GND R P FBC 1/2 VIDEO AGC Y/C MIX NC1 N.L. DEEM Y-LPF CLAMP DETAIL ENH NL EMPHA NL EMPHA FM MOD NORMAL R-EQ TEST YNR/COMB 3.58M BPF1 B.D P PB AMP CNC BGA BGA BGA R P AFTER BEFORE 3.58M BPF2 B-UP AMP Main CONV ACC AMP DET ACC C-LPF 4.21M BPF Sub CONV R R P PP LPF R P REC AFC PB APC REC APC P R RP R P C-VCC SERAIL DECODER C-GND C-ROT RF-SW IN AUDIO MUTE HA SW ENV DET ACC DET HA VCC COMP OUT KILL DET DET CHROMA GND HA R R P P R PB-C PB-C R R P P VSS SYNC T1 Y/C/AUDIO/CCD/H.AMP PCB010 NC 2.2 0 1.6 3.2 3.8 4.9 4.93.3 3.9 0 2.12.91.61.81.91.85.01.81.6 0 1.81.81.8 0 2.34.92.3 0 2.3 NC 2.13.24.45.04.13.61.62.12.32.34.12.63.32.63.23.22.501.60 0.8 2.2 1.2 4.9 4.9 3.2 4.9 5.2 5.2 5.2 0 5.2 0 4.8 4.8 2.1 4.1 NC 3.3 3.2 2.3 2.3 2.3 2.3 2.3 2.3 0 2.3 2.3 0.8 4.8 1.1 1.1 1.4 2.0 0 2.6 2.6 0.2 2.8 SP_COM FROM POWER VMA224 YC11 1 ABC D E F GH ABC D E F GH 21345678 21345678 DATE: TEC-HQ TEC-HQ SEC. PUBRICATION: DISTRIBUTE: SECTION: ORION ELECTRIC CO.LTD DWG.NO. FUNCTION CHKD BYDET.CHKD BYDRAWN BYDESIGN BY : ISSU Rev.No: PCB NAME STANDARDMODELDESCRIPTION VMA224A_D 5 M4F1-01BNTSC C.POOWASORNW.WANPEN UL/FCC 05/30/2001 Q1007 KRC103RTK CENT SW D1002 1SS133 D1005 1SS133 D1004 1SS133 D1003 1SS133 DANS LA NOMENCLATURE DES PIECESN’UTILISER QUE CELLS DECRITESDANGEREUSES AN POINT DE VUE SECURITE ETANT LES PIECES REPAREES PAR UN ATTENTION: DESCRIBED IN PARTS LIST ONLYCRITICAL FOR SAFETY,USE ONES ARE SINCE THESE PARTS MARKED BY CAUTION: L1002_1 22uH IC1001 OEC0104A TIMER SYSCON SERVO CONTROLLER IC 110 100 11 12 13 14 15 16 17 18 19 2 20 21 22 23 24 25 26 27 28 29 3 30 31 32 33 34 35 36 37 38 39 4 40 41 42 43 44 45 46 47 48 49 5 50 51 52 53 54 55 56 57 58 59 6 60 61 62 63 64 65 66 67 68 69 7 70 71 72 73 74 75 76 77 78 79 8 80 818283848586878889 9 90919293949596979899 D1001 LNA2702L010R Q1005 SG-233SMS_SEN A 123 4 Q1004 SG-233S MS_SEN B 123 4 Q1008 PNA2604M010R BOT SENSOR Q1006PNA2604M010REOT SENSOR VR1001 10K PG ADJ Q1002 RPI-301 REEL SENSOR 1 234 IC1003 R3111N311A/C SYSTEM RESET IC 123 4 5 CP1001TMC-J12P-B2 1 101112 23456789 SW1001 MXS01350MVP0 X1001_1 1002T01003 1 2 3 DURING PLAYBACKMEASURED WITH THE DIGITAL TESTER NOTE: THE DC VOLTAGE AT EACH PART WAS OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE NOT…

Text truncated - open the document above for the full version.

Test report No. : 21KE0003-KT Page: 2 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Contents Page Section 1 :Client information3 Section 2 :Equipment under test (E.U.T.)3 Section 3 :Test specification, methods & procedures5 Section 4 :Operation of E.U.T. during tests6 Section 5 :Summary of test results7 Section 6 :Test instruments8 Section 7 :Conducted interference9 Section 8 :Radiated emission12 Section 9 :Antenna terminal voltage15 Section 10 :RF output level / spurious emission16 Section 11 : Picture sensitivity17 Section 12 :Noise figure18 Appendix 1 :Photographs of test set up19 Appendix 2 :Data of EMI tests26 Test report No. : 21KE0003-KT Page: 3 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 1 : Client information Company name: ORION ELECTRIC CO., LTD. Address: 41-1 Iehisa-cho, Takefu-shi, Fukui 915-8555 JAPAN Telephone number: +81-778-23-0019 Facsimile number: +81-778-23-7799 Contact person: Hiroshi Tsujimoto Section manager Engineering headquarters Administration section Section 2 : Equipment under test (E.U.T.) 2.1Identification of E.U.T. Unique type identification : Video cassette recorder Model number: VCR4510D Serial number: - Manufacturer: 1. WORLD ELECTRIC (THAILAND) LTD. 236 Moo 2 Nongchark, Banbung, Chonburi 20170, Thailand 2. KORAT DENKI LTD. 149 Moo 10 Thombol Chokchai, Amphur Chokchai, Nakhonratchasima 30190, Thailand 3. ORION AMERICA, INC. Hwy 41 North, Orion Place, Princeton, Indiana 47670, U.S.A Test report No. : 21KE0003-KT Page: 4 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 2.2Product description ORION ELECTRIC CO., LTD., Model: VCR4510D (referred to as the EUT in this report) is a video cassette recorder. Tuner type : Quartz PLL frequency synthesized I / F :45.75 MHz (Picture), 41.25 MHz (Sound) Receiving channel : VHF 2 – 13 ch / UHF 14 – 69 ch / CATV 1 – 125 ch Antenna input : 75 ohm Video signal : NTSC color Power source : AC 120 V / 60 Hz, 8 W I / O terminal (Video) : RCA in 1Vp-p 75 ohm, RCA out 1 Vp-p 75 ohm I / O terminal (Audio) : RCA in 300 mV 50 k ohm, RCA out 300 mV 1 k ohm Test report No. : 21KE0003-KT Page: 5 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 3 : Test specification, methods & procedures 3.1Test specification Basic standard : FCC Part 15 Subpart B : Radiated frequency devices - unintentional radiators Test methods:ANSI C63.4 : 1992 : Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz. 3.2Methods & procedures No.ItemTest requirementsTest procedureLimits 1 Conducted interference FCC Part 15 Subpart B Sec. 15.107 (a) ANSI C63.4 1992250 uV 2 Radiated emissionFCC Part 15 Subpart B Sec. 15.109 (a) ANSI C63.4 199230 – 88 MHz: 100 uV/m 88 – 216 MHz: 150 uV/m 216 – 960 MHz: 200 uV/m above 960 MHz: 500 uV/m 3 Antenna terminal voltage FCC Part 15 Subpart B Sec. 15.111 (f) ANSI C63.4 19922 nW (at 75 ohm) RF output levelFCC Part 15 Subpart B Sec. 15.115 (b) ANSI C63.4 1992Video signal: 3000 uV Aural signal: 671 uV 4 Spurious emission94.8 uV 5 Picture sensitivityFCC Part 15 Subpart B Sec. 15.117 (f) ANSI C63.4 19928 dB 6 Noise figureFCC Part 15 Subpart B Sec. 15.117 (g) ANSI C63.4 199214 dB Test report No. : 21KE0003-KT Page: 6 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 4 : Operation of E.U.T. during tests 4.1Operating modes * Receive mode (0 dBmV input / 25 dBmV input) * AV Input mode (1 Vp-p input / 5 Vp-p input) * Playback mode 4.2Configuration and peripherals AC 120 V / 60 Hz A 1 47 k ohm terminator 75 ohm terminator 1k ohm terminator 75 ohm terminator 23 4 EUT and support equipment EUT SignItemModel numberSerial numberManufacturer AVideo cassette recorderVCR4510D-ORION ELECTRIC CO., LTD. Support item (s) No.ItemLength (m)ShieldingManufacturer 1AC power cable1.75Unshielded 2AV cable1.0Shielded 3AV cable1.0Shielded 4AV cable1.0Shielded Test report No. : 21KE0003-KT Page: 7 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Section 5 : Summary of test results 5.1Test results We confirmed the EUT complied to the specifications of FCC Part 15 Subpart B in the test configuration mentioned in this test report. No.ItemTest requirementsLimitsResults 1 Conducted Interference FCC Part 15 Subpart B Sec. 15.107 (a) 250 uVPassed 2 Radiated Emission FCC Part 15 Subpart B Sec. 15.109 (a) 30 – 88 MHz: 100 uV/m 88 – 216 MHz: 150 uV/m 216 – 960 MHz: 200 uV/m above 960 MHz: 500 uV/m Passed 3 Antenna Terminal Voltage FCC Part 15 Subpart B Sec. 15.111 (f) 2 nW (at 75 ohm)Passed RF output levelFCC Part 15 Subpart B Sec. 15.115 (b) Video signal: 3000 uV Aural signal: 671 uV Passed Spurious emission94.8 uVPassed 4 Picture SensitivityFCC Part 15 Subpart B Sec. 15.117 (f) 8 dBPassed 5 Noise FigureFCC Part 15 Subpart B Sec. 15.117 (g) 14 dBPassed 5.2Test…

Text truncated - open the document above for the full version.

Test report No. : 21KE0003-KT Page: 26 of 26 Date of issue: June 19, 2001 A-pex International Co., Ltd. Kanto Office EMC Laboratory. Newstage Yokohama Bldg.3F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515 Facsimile: +81 45 450 1534 Appendix 2 : Data of EMI tests This section contains the following data. Conducted interference : A2-1 to A2-10 Radiated emission: A2-11 to A2-19 Antenna terminal voltage: A2-20 to A2-21 RF output level / spurious emission: A2-22 to A2-36 Picture sensitivity: A2-37 Noise figure: A2-38