A7RM4F2CVCR

1 4 HEAD VIDEO CASSETTE RECORDER OWNER'S MANUAL Before operating the unit, please read this manual thoroughly. ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV (Cable TV), set this menu option to the "TV" mode. 4F11701A COV-0710/16/01, 1:35 PM1 2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. 2 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. ATTACHMENTS The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards. IMPORTANT SAFEGUARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A - Reorient or relocate the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV techni- cian for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC (Federal Communications Commission) Rules could void the user's authority to operate this equipment. COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the event that third party copyrights and other rights are not violated. 7. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 8. ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. 8A.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combina- tion to overturn. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION 4F11701A COV-0710/16/01, 1:35 PM2 33 9. VENTILATION Slots and openings in the cabinet back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power com- pany. For units intended to operate from battery power, or other sources, refer to the respective pages on this Owner's Manual for their operating instructions. 11. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding- type plug. 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug…

Text truncated - open the document above for the full version.

ORION ELECTRIC CO., LTD. 41-1 IEHISA-CHO, TAKEFU-SHI TEL.+81-778-23-0001 FUKUI, 915-8555, JAPAN FAX.+81-778-24-7799 Modification Letter Date American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: Please be advised that the following information is a list of modifications that will be included in the production process for the above-referenced equipment. • XXXXX • XXXXX Thank you for your attention to this matter. Signatory ORION ELECTRIC CO., LTD. 41-1 IEHISA-CHO, TAKEFU-SHI TEL.+81-778-23-0001 FUKUI, 915-8555, JAPAN FAX.+81-778-24-7799

Brief Description for Circuit Function RF IN/OUT:EXT. Antenna Terminal (input and output) RF MOD.:RF Modulator (output channel:3ch or 4ch switchable) TUNER:Frequency Synthesizer Tuning System VIF/SIF DEMODULATOR:VIF/SIF Signal Processor and Demodulator VIDEO SW:Video Signal Selector Audio SW:Audio Signal Selector Y/C:Luminanse and Chrominanse Signal Processor CCD:CCD COMB Filter Circuit A/V IN/OUT:EXT. Audio/Video Terminal (input and output) MOTOR DRIVER:Cylinder Motor Control VIDEO/AUDIO HEAD:Video-Head and Audio-Head HEAD AMP:Amplifier of Video-Head Signal A/C HEAD:Audio-Head and Tape Control-Head AUDIO:Audio-Head Signal Processor HI-FI DEMODULATOR:HI-FI Audio Signal Demodulator REMOTE SENSOR:Sensor of Infrared Remote Control SW REG:Power Regulator (Switching Regulator) Operation Key:Operation Key( Power, CH Up, CH Down, Play,FF, Rew, Rec, Stop/Eject) MICRO PROCESSOR:System Control, Timer, Servo

Test report No.: 22HE0001-KT-1 Page: 2 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Contents Page Section 1:Client information3 Section 2:Equipment under test (E.U.T.)3 Section 3:Test specification, methods & procedures5 Section 4:Operation of E.U.T. during tests6 Section 5:Summary of test results8 Section 6:Test instruments10 Section 7:Conducted interference11 Section 8:Radiated emission14 Section 9:Antenna terminal voltage17 Section 10: RF output level / spurious emission18 Section 11: Antenna transfer switch19 Section 12: Picture sensitivity20 Section 13:Noise figure21 Appendix 1 :Photographs of test set up22 Appendix 2 :Data of EMI tests30 Test report No.: 22HE0001-KT-1 Page: 3 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Section 1 : Client information Company name: ORION ELECTRIC CO., LTD. Brand Name:TOSHIBA Address: 41-1 Iehisa-cho, Takefu-shi, Fukui 915-8555, JAPAN Telephone number: +81-778-23-0019 Facsimile number: +81-778-23-7799 Contact person: Hiroshi Tsujimoto Section manager Engineering headquarters Administration section Section 2 : Equipment under test (E.U.T.) 2.1Identification of E.U.T. Type of equipment: VIDEO CASSETTE RECORDER Model number: W525 Rating:AC 120 V / 60 Hz Manufacturer: 1.WORLD ELECTRIC (THAILAND) LTD. 236 Moo 2 Nongchark, Banbung, Chonburi 20170, Thailand 2. KORAT DENKI LTD. 149 Moo 10 Thombol Chokchai, Amphur Chokchai, Nakhonratchasima 30190, Thailand 3. ORION AMERICA, INC. Hwy 41 North, Orion Place, Princeton, Indiana 47670, U.S.A Receipt Date of Sample:March 01, 2002 Condition of EUT:Production Prototype Test report No.: 22HE0001-KT-1 Page: 4 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 2.2Product description ORION ELECTRIC CO., LTD., Model: W525 (referred to as the EUT in this report) is a VIDEO CASSETTE RECORDER. The EUT specifications is as follows. Tuner type : Quartz PLL frequency synthesized I / F :45.75 MHz (Picture), 41.25 MHz (Sound) Receiving channel : VHF 2 – 13 ch / UHF 14 – 69 ch / CATV 1 – 125 ch Antenna input : 75 ohm Video signal : NTSC color Power source : AC 120 V / 60 Hz Power Consumption :Approx.: 8 W Inputs / Outputs Video:In (RCA) 1Vp-p / 75 ohm Out (RCA) 1Vp-p / 75 ohm Audio:In (RCA) –8dBm / 50K ohm Out (RCA) –8dBm / 1K ohm Antenna:UHF/VHF IN 75 ohm coaxial UHF/VHF OUT 75 ohm coaxial 2.3Similar apparatus There is no similar apparatus for the EUT. Test report No.: 22HE0001-KT-1 Page: 5 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Section 3 : Test specification, methods & procedures 3.1Test specification Test specification: FCC Part 15 Subpart B Title:FCC 47 CFR Part 15 Radio Frequency Device Subpart B Unintentional Radiators (Subpart C Intentional Radiators) 3.2Methods & procedures No.ItemTest procedureLimitsRemarks 1Conducted interferenceANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 250 uVLISN 2Radiated emissionANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 30–88 MH: 100 uV/m 88–216 MHz: 150 uV/m 216–960 MHz: 200 uV/m above 960 MHz: 500 uV/m 3 m 3Antenna terminal voltageANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 2 nW (at 75 ohm)– RF output levelVideo signal: 3000 uV Aural signal: 671 uV –4 Spurious emission ANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 94.8 uV– 5Transfer switchANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 9.5 dB– 6Picture sensitivityANSI C63.4:1992 IEEE 213:1987 IEEE 187:1990 8 dB– 7Noise figureFCC/OET MP:2:198614 dB– 3.3Additions or deviations to standard No addition, deviation or exclusion has been made from standards. Test report No.: 22HE0001-KT-1 Page: 6 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Section 4 : Operation of E.U.T. during tests 4.1Operating modes The EUT exercise program used during testing was designed exercise the various system components in a manner similar to typical use. The sequence in used :* Receive mode (0 dBmV input / 25 dBmV input) * AV input mode (1 Vp-p input / 5 Vp-p input) Line 1 / Line 2 * VCR playback mode Operation :The EUT tested above operation mode (Using a video tape with a typical TV signal recorded on it, if necessary.) Just ification :The system was configured in typical fashion (as a customer would normally use it) for testing. 4.2Configuration and peripherals Front View A B 50k ohm terminator 50k ohm terminator 75 ohm terminator Audio in Audio in Video in * Cabling was taken into consideration and test data was taken under worse case conditions. Top View AC 120 V / 60 Hz 1 Front Back Audio out 1k ohm terminator Audio out 1k ohm terminator 75 ohm terminator Video out 75 ohm terminator RF in RF out 50 k ohm terminator Audio in 50 k ohm terminator 75 ohm terminator Video in Audio in Line 1 A Audio in 50 k ohm terminator 75 ohm terminator Video in Audio in Line 2 50 k ohm terminator To TV signal generator * Cabling was taken into consideration and test data was taken under worse case conditions. Test report No.: 22HE0001-KT-1 Page: 7 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin…

Text truncated - open the document above for the full version.

Test report No.: 22HE0001-KT-1 Page: 22 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Appendix 1 : Photographs of test set up This section contains the following photographs. Page 23 :Test set up of conducted interference Page 24 :Test set up of radiated emission Page 25 :Test set up of antenna terminal voltage Page 26 :Test set up of RF output level / spurious emission Page 27 :Test set up of antenna transfer switch Page 28 :Test set up of picture sensitivity Page 29 :Test set up of noise figure Test report No.: 22HE0001-KT-1 Page: 23 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Conducted interference Test report No.: 22HE0001-KT-1 Page: 24 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Radiated emission Test report No.: 22HE0001-KT-1 Page: 25 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Antenna terminal voltage Test report No.: 22HE0001-KT-1 Page: 26 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 RF output level / spurious emission Test report No.: 22HE0001-KT-1 Page: 27 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Antenna transfer switch Test report No.: 22HE0001-KT-1 Page: 28 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Picture sensitivity Test report No.: 22HE0001-KT-1 Page: 29 of 94 Date of issue: March 06, 2002 A-pex International Co., Ltd. Kanto OfficeEMC Laboratory. Newstage Yokohama Bldg.1F 1-1-32 Shin-Urashima-cho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0031, JAPAN Telephone : +81 45 450 1515Facsimile: +81 45 450 1534 Noise figure