ADB9ZWFA100Universal Automatic Identification System

UAIS TRANSPONDER FA-100 Your Local Agent/DealerYour Local Agent/Dealer 9-52 Ashihara-cho,9-52 Ashihara-cho, Nishinomiya, JapanNishinomiya, Japan Telephone :Telephone :0798-65-21110798-65-2111 Telefax :Telefax :0798-65-42000798-65-4200 FIRST EDITION :FIRST EDITION :SEP.SEP.20022002 Printed in JapanPrinted in Japan All rights reserved.All rights reserved. B :B :SEP.SEP.25,200225,2002 PUB.No.PUB.No.OME-44170OME-44170 *00080932300**00080932300* *00080932300**00080932300* ((DAMIDAMI)) FA-100FA-100 * 0 0 0 8 0 9 3 2 3 0 0 ** 0 0 0 8 0 9 3 2 3 0 0 * *OME44170B00**OME44170B00* *OME44170B00**OME44170B00* * O M E 4 4 1 7 0 B 0 0 ** O M E 4 4 1 7 0 B 0 0 * i SAFETY INSTRUCTIONS WARNING Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Do not place liquid-filled containers on the top of the equipment. Fire or electrical shock can result if a liquid spills into the equipment. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Make sure no rain or water splash leaks into the equipment. Fire or electrical shock can result if water leaks in the equipment. Do not operate the equipment with wet hands. Electrical shock can result. ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. WARNING LABEL A warning label is attached to the AC-DC power supply. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer about replacement. WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011-1 Code No.: 100-236-231 ii TABLE OF CONTENTS FOREWORD...........................................iii SYSTEM CONFIGURATION ...................v PROGRAM NUMBER ............................vi SYSTEM OVERVIEW............................vii 1 OPERATION ........................................1 1.1 Description of Controls ..........................1 1.2 Turning On and Off ................................2 1.3 Adjusting Display Brilliance and Contrast ..................................................3 1.4 Menu Overview ......................................4 1.4.1 Menu operating procedure .........4 1.4.2 Remarks on menu operation ......5 1.5 Setting Up for a Voyage.........................7 1.6 Setting CPA/TCPA .................................10 1.7 Plotter Display...................................... 11 1.8 Target Data Display .............................12 1.8.1 Normal target data....................12 1.8.2 Finding dangerous ship’s data..14 1.9 Own Ship’s Information........................15 1.9.1 Own static data .........................15 1.9.2 Own dynamic data....................17 1.10 Messages.............................................18 1.10.1 Sending a message..................18 1.10.2 Receiving messages ................18 1.10.3 Message logs ...........................20 1.11 Regional Operating Channels .............22 1.11.1 Viewing channels, Tx power.....22 1.11.2 Displaying, editing regional operating area status ................23 1.12 Enabling/Disabling the Buzzer.............25 1.13 Long Range Mode ...............................26 2 MAINTENANCE, TROUBLESHOOTING ..........................27 2.1 Maintenance........................................ 27 2.2 Resetting the Breaker ......................... 28 2.3 Replacement of Battery....................... 28 2.4 Troubleshooting................................... 29 2.5 Diagnostics.......................................... 30 2.5.1 Displaying program number..... 30 2.5.2 Memory test ............................. 31 2.5.3 Keyboard test........................... 31 2.5.4 LCD test ................................... 32 2.5.5 On/off history............................ 32 2.5.6 GPS test................................... 33 2.6 Alarm Status ........................................ 34 2.7 Error Messages ................................... 35 2.8 GPS Monitor........................................ 36 2.9 Displaying Sensor Status .................... 37 2.10 Restoring Default Settings .................. 38 APPENDIX........................................ AP-1 Menu Tree ............................................... AP-1 Parts List.................................................. AP-3 Parts Location.......................................... AP-4 Digital Interface (IEC 61162-2) ................ AP-7 SPECIFICATIONS .............................SP-1 INDEX .................................................IN-1 Declaration of conformity iii FOREWORD A Word to the Owner of the FA-100 FURUNO Electric Company thanks you for purchasing the FA-100 UAIS Transponder. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedication to excellence is furthered by our extensive global network of agents and dealers. Your equipment is designed and constructed to meet the rigorous demands of the marine environment. However, no machine can perform its intended function unless properly operated and maintained. Please carefully read and follow the operation and maintenance procedures set forth in this manual. We would appreciate feedback from you, the end-user, about whether we are achieving our purposes. Thank you for considering and purchasing FURUNO. Note: The example screens shown in this manual may not match the screens you see on your display. The screen you see depends on your system configuration and equipment settings. Featur…

Text truncated - open the document above for the full version.

ii TABLE OF CONTENTS FOREWORD...........................................iii SYSTEM CONFIGURATION ...................v PROGRAM NUMBER ............................vi SYSTEM OVERVIEW............................vii SPECIFICATIONS .............................SP-1 1 OPERATION ........................................1 1.1 Description of Controls ..........................1 1.2 Turning On and Off ................................2 1.3 Adjusting Display Brilliance and Contrast ..................................................3 1.4 Menu Overview ......................................4 1.4.1 Menu operating procedure .........4 1.4.2 Remarks on menu operation ......5 1.5 Setting Up for a Voyage.........................7 1.6 Setting CPA/TCPA .................................10 1.7 Plotter Display...................................... 11 1.8 Target Data Display .............................12 1.8.1 Normal target data....................12 1.8.2 Finding dangerous ship’s data..14 1.9 Own Ship’s Information........................15 1.9.1 Own static data .........................15 1.9.2 Own dynamic data....................17 1.10 Messages.............................................18 1.10.1 Sending a message..................18 1.10.2 Receiving messages ................20 1.10.3 Message logs ...........................21 1.11 Regional Operating Channels .............22 1.11.1 Viewing channels, Tx power.....22 1.11.2 Displaying, editing regional operating area status ................23 1.12 Enabling/Disabling the Buzzer.............25 1.13 Long Range Mode ...............................26 2 MAINTENANCE, TROUBLESHOOTING.......................27 2.1 Maintenance........................................ 27 2.2 Resetting the Breaker ......................... 28 2.3 Replacement of Battery....................... 28 2.4 Troubleshooting................................... 29 2.5 Diagnostics.......................................... 30 2.5.1 Displaying program number..... 30 2.5.2 Memory test ............................. 31 2.5.3 Keyboard test........................... 31 2.5.4 LCD test ................................... 32 2.5.5 On/off history............................ 32 2.5.6 GPS test................................... 33 2.6 Alarm Status ........................................ 34 2.7 Error Messages ................................... 35 2.8 GPS Monitor........................................ 36 2.9 Displaying Sensor Status .................... 37 2.10 Restoring Default Settings .................. 38 APPENDIX........................................ AP-1 Menu Tree ............................................... AP-1 Parts List.................................................. AP-3 Parts Location.......................................... AP-4 Digital Interface (IEC 61162-2) ................ AP-7 VHF Frequency List............................... AP-26 INDEX .................................................IN-1 Declaration of Conformity APPENDIX AP-26 VHF channel list APPENDIX AP-27 1083157.1751283 157.18752083161.7752283 161.7875 1084157.2251284 157.23752084161.8252284 161.8375 1085157.2751285 157.28752085161.8752285 161.8875 1086157.3251286 157.33752086161.9252286 161.9375 1087157.3751287 157.38752087161.9752287 161.9625 1088157.4251288 157.41252088162.0252288 162.0125 Note: Add 1000 for one-digit, two-digit, and three-digit channel numbers.

APPENDIX AP-26 VHF channel list Ch No. FrequencyCh No. FrequencyCh No. FrequencyCh No. Frequency 1001156.05208156.41252002160.72206160.9125 1003156.15209156.46252003160.752207160.9625 1005156.25210156.51252004160.82218161.5125 6156.3211156.56252005160.852219161.5625 1007156.35212156.61256156.32220161.6125 1018156.9213156.66252007160.952221161.6625 1019156.95214156.71258156.42222161.7125 1020157215156.76259156.452223161.7625 1021157.05216156.812510156.52224161.8125 1022157.1217156.862511156.552225161.8625 1023157.151218156.912512156.62226161.925 1024157.21219156.962513156.652227161.975 1025157.251220157.012514156.72228162.0125 1026157.31221157.062515156.752260160.6375 1027157.351222157.112516156.82261160.6875 1028157.41223157.162517156.852262160.7375 1061156.0751224157.21252018161.52263160.7875 1063156.1751225157.26252019161.552264160.8375 1064156.2251226157.31252020161.62265160.8875 1065156.2751227157.36252021161.652266160.9375 1066156.3251228157.41252022161.72278161.5375 67156.3751260156.03752023161.752280161.6375 68156.4251261156.08752024161.82281161.6875 69156.4751262156.13752025161.852282161.7375 70156.5251263156.18752026161.91252283161.7875 71156.5751264156.23752027161.96252284161.8375 72156.6251265156.287520281622285161.8875 73156.6751266156.33752060160.6252286161.9375 74156.725267156.38752061160.6752287161.9625 75156.775268156.43752062160.7252288162.0125 76156.825269156.48752063160.775 77156.875270156.53752064160.825 1078156.925271156.58752065160.875 1079156.975272156.63752066160.925 1080157.025273156.68752078161.525 1081157.075274156.73752079161.575 1082157.125275156.78752080161.625 1083157.175276156.83752081161.675 1084157.225277156.88752082161.725 1085157.2751278156.93752083161.775 1086157.3251280157.03752084161.825 1087157.3751281157.08752085161.875 1088157.4251282157.13752086161.925 1201156.06251283157.18752087161.975 1202156.11251284157.23752088162.025 1203156.16251285157.28752201160.6625 1204156.21251286157.33752202160.7125 1205156.26251287157.38752203160.7625 1206156.31251288157.41252204160.8125 1207156.36252001160.652205160.8625 Note: Add 1000 for one-digit, two-digit, and three-digit channel numbers.

From: kenji kawabata [[email protected]] Sent: Monday, March 17, 2003 12:16 AM To: Zanardi, Chuck Cc: [email protected]; Miki Mitani (E-mail); Ametani, Shigenori; Kitagawa, Kenji; Kunz, Eric; Downs, Paul; Terada, Hideyuki; Ryan, Shane Subject: Re: FCC REQUEST FOR FURTHER INFORMATION ON FA-100 Attn: Mr. Chuck Zanardi, Regarding item 2 of FCC request, we will modify the software to meet the requirement, i.e. when ch. 67 or ch. 13 is selected, carrier power is automatically reduced to 1 watt. When manually selected, it is reduced to 1 watt but makes it possible to revert to full power on demand of operator. The menu process will be changed and so we will amend the operator's manual too. Software modification of "no reception without a checksum" will be done together with the above. Best regards, K. Kawabata -------------------------------------------------------------------------------- ----- >3/14/03 >To: Kenji Kawabata > >I have received to following request from the FCC in regards to the FA-100 >AIS. I have sent them the information requested in item 1. I do not have >the data requested in item 2. >See attached FCC e-mail. <<Required data.txt>> > >Regards >C Zanardi >Commercial Service Manager > [email protected] Phone 798-63-1076 Extension 2843

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 1 of 42 - Photographs of Furuno U-AIS FA-100 1 Transponder FA-100 1.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 2 of 42 - 1.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 3 of 42 - 1.3 Inside Front View (Top Cover and Front Panel Removed) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 4 of 42 - 1.4 Inside Right View (showing PCB MPB (24P0015)) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 5 of 42 - 1.5 Inside Rear View (showing PCBs MOT2 (24P0024) (upper), OCN2 (24P0025) (lower right) and DCN (24P0020) (lower left)) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 6 of 42 - 1.6 Inside Left View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 7 of 42 - 1.7 Inside Top View (showing PCB GPS RX (GN-79N1A-N) (right)) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 8 of 42 - 1.8 Inside Front View (showing EXCT, PA, PWX, DSC and RXs modules) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 9 of 42 - 1.9 Inside Front View (modules removed) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 10 of 42 - 1.10 Inside Front View (showing Back of Front Panel and PCB LKY2 (24P0026) ) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 11 of 42 - 1.11 Inside Front View (showing Back of Front Panel) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 12 of 42 - 1.12 Name Plate

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 28 of 42 - 2 Junction Box CB-100 2.1 Top View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 29 of 42 - 2.2 Inside View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 30 of 42 - 2.3 Name Plate LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 31 of 42 - 3 Distributor DB-1 3.1 Top View (with Name Plate affixed) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 32 of 42 - 3.2 Inside View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 33 of 42 - 4 Combined Antenna GVA-100 4.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 34 of 42 - 4.2 Right Side View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 35 of 42 - 4.3 Left Side View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 36 of 42 - 4.4 Bottom View (with Name Plate affixed) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 37 of 42 - 4.5 Inside View (showing GPS antenna (right) and Distributor (left)) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 38 of 42 - 4.6 Inside View (Distributor) LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 39 of 42 - 4.7 Name Plate LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 40 of 42 - 5 Power Supply PR-240 5.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 41 of 42 - 5.2 Top View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 42 of 42 - 5.3 Name Plate (with Warning label)

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 12 of 42 - 1.12 Name Plate

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page5of37- 2Identification of Equipment (FCC Rule 2.925) The following nameplate is permanently fixed on the corresponding equipment units. FCC ID: ADB9ZWFA100 Material of nameplate: Polyester film, 0.1 mm thick Fig 2.1 FA-100 Nameplate

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 12 of 42 - 1.12 Name Plate

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 13 of 42 - 1.13 PCB PA (24P0014) 1.13.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 14 of 42 - 1.13.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 15 of 42 - 1.14 PCB EXCT (24P0012) 14.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 16 of 42 - 1.14.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 17 of 42 - 1.15 PCB RX (24P0010) 1.15.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 18 of 42 - 1.15.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 19 of 42 - 1.16 PCB DSC (24P0013) 1.16.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 20 of 42 - 1.16.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 21 of 42 - 1.17 PCB PWX (24P0016) 1.17.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 22 of 42 - 1.17.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 23 of 42 - 1.18 PCB MPB (24P0015) 1.18.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 24 of 42 - 1.18.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 25 of 42 - 1.19 PCB LKY2 (24P0026) 1.19.1 Front View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 26 of 42 - 1.19.2 Rear View LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Doc. nr.: FLI 01-02-030 Date of issue: 26 September 2002 - Page 27 of 42 - 1.20 PCB DCN (24P0020)

LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH This report shall not be reproduced except in full, without the written approval of Furuno Labotech International Co., Ltd. TECHNICAL INFORMATION TEST REPORT ON THE PERFORMANCE OF Universal Automatic Identification System Trade Name : FURUNO Model : FA-100 Report no.: FLI 12-02-046 Date of issue: October 4, 2002 Furuno Labotech International Co., Ltd. 9-52 Ashihara-cho, Nishinomiya City, Hyogo 662-8580, Japan Tel: +81-798-63-1094 Fax: +81-798-63-1098 LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page1of37- All tests were performed in Furuno Labotech International Co., Ltd. All data herein contained is true and correct to our best knowledge. All tests were performed by: Name: Takekazu Yokose Function: Test Engineer Signature: Review and report by: Name: Toshiro Segawa Function: Manager, QA Signature: This report has been verified and approved by: Date: October 4, 2002 Name: Mitsuyoshi Komori Function: Manager, Technical Section Signature: LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page2of37- * * * * * * C O N T E N T S * * * * * * 1General Information.................................................................................................................................... 3 2Identification of Equipment (FCC Rule 2.925).................................................................................... 5 3Test data....................................................................................................................................................... 6 3.1RF Power Output (FCC Rule 2.1046)...................................................................................................... 6 3.2Occupied Bandwidth (FCC Rule 2.1049)................................................................................................. 7 3.3Spurious Emissions at Antenna Terminals (FCC Rule 2.1051)............................................................ 10 3.4Field Strength of Spurious Radiation (FCC Rule 2.1053).................................................................. 13 3.5Frequency Stability (FCC Rule 2.1055)................................................................................................. 17 3.6Sensitivity Characteristics of VHF Radiotelephone Receiver (FCC Rule 80.874)............................... 18 4Photographs to Reveal Equipment Construction and Layout (FCC Rule 2.1033)............... 20 5Description of Circuitry and Devices (FCC Rules 2.1033)........................................................... 21 5.1 Function of Each Semiconductor or Active Device .................................................................................... 21 5.2 Circuit Description ....................................................................................................................................... 25 6 Operator s Manual Incl. Circuit Diagrams (FCC Rule 2.1033)..................................................... 36 Attachment A LIST OF MEASURING/TEST EQUIPMENT........................................................................... 37 LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page3of37- 1General Information 1.1GENERAL (a)Manufacturer:Furuno Electric Co., Ltd. Ashihara-cho 9-52, Nishinomiya-city, 662-8580 Japan (b)Model:FA-100 TypeSerial Number Transponder unitFA-1003539-0101 GPS AntennaGSC-001 VHF AntennaFAB-151D Junction BoxCB-100 (c)Display:Monochrome STN-LCD, 60 (H) x 95 (W) mm, 120 x 64 dots (d)Output Power:2 W/12.5 W or 0 W exchangeable (e)Impedance: 50 ohms (f)DSC Receiver:CH70 fixed, 156.525 MHz, G2B, 1200 bps (g)Band Width:25 kHz/12.5 kHz 1.2TRANSPONDER UNIT (a)CPU:SH7709A, 76.0 MHz (b)ROM:Flash ROM 1MW (c)Menu:Target data/Plotter/Own data/Set MSG/Init Settings/System Settings/Diagnostics 1.3GPS RECEIVER (a)Receiving Channels:12 channels parallel, 12 satellites tracking (b)RX Frequency/RX Code: 157.42 MHz, C/A code (c)Position Fixing System:All in view, 8-state Kalman fiter (d)Position Accuracy:Approx. 10m, 95% of the time, (HDOP 4) DGPS: approx. less than 5 m, 95% of the time (e)Tracking Velocity:900 kts (f)Position-fixing Time:Warm start: 12 seconds, Cold start: 90 seconds (g)Position Update Interval: 1 second (h)DGPS Data Receiving:RTCM SC-104 Ver 2.1 formatted 1.4INTERFACES (a) Sensor 1/2/3(IEC 61162-1/2) Input:DTM, GNS, GLL, GGA, RMC, VBW, VTG, OSD, HDT, GBS, ROT (GN>GP>GL>LC) (b) PCI /O, EXTRA1, LR or ECDIS/RADAR (IEC 6116201/2) Input:VSD, SSD, ABM, BBM. ACA, ACK, AIR, DTM, GBS, GGA, GLL, LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page4of37- GNS, HDT, LRF, LRI, OSD, RMC, ROT, VBW, VTG Output:VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI (c)Alarm:Contact Closure (d)LAN: (10 base-T):IEC 61162-4 (e)AD-10:AD-10 format 1.5POWER SUPPLY (a)Transponder Unit:12 - 24 VDC: 7 - 3.5A (b)AD/DC Power Supply Unit (PR-240, option) 100 - 115/200 - 230 VAC, 1 phase, 50/60 Hz 1.6ENVIRONMENTAL CONDITION (a) Ambient Temperature GPS Antenna Unit:-25°C to +70°C Other units:-15°C to +55°C (b)Relative Humidity:95% at 40°C (c)Waterproof (IEC 61529) Antenna Unit:IPX6 Other units:IPX0 (d)Vibration:IEC 60945 edition 3 1.7COATING COLOR (a)GPS Antenna Unit:N9.5 (b)Other units:2.5GY5/1.5 LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page5of37- 2Identification of Equipment (FCC Rule 2.925) The following nameplate is permanently fixed on the corresponding equipment units. FCC ID: ADB9ZWFA100 Material of nameplate: Polyester film, 0.1 mm thick Fig 2.1 FA-100 Nameplate LL LL AA AA BB BB OO OO TT TT EE EE CC CC HH HH Furuno Labotech International Report no.: FLI 12-02-046 Form: Q053/01-Page6of37- 3Test data 3.1 RF Power Output (FCC Rule 2.1046)…

Text truncated - open the document above for the full version.

Bundesrepublik Deutschland Federal Republic of Germany Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency nach DIN EN 45001 akkreditiertes Prüflaboratorium Federal Maritime and Hydrographic Agency Bernhard-Nocht-Str. 78 D-20359 Hamburg Germany DAT-P-086/98-00 Note: Extracts from this test report shall not be copied without permission of the Federal Maritime and Hydrographic Agency Version 1.27 Conformance test report of an Automatic Identification System (AIS) Equipment under test: Furuno AIS Type: FA-100 Applying test standards: IEC 61993-2 (2002) Sections 14, 16-21 IEC 61162-1 (2000) -2 (1998) Test Report No.: 734.2/0043/2003 – S3220 Applicant: Ferropilot GmbH Siemensstr. 35 D 25462 Rellingen Germany Hamburg, 21.1. 2003 Federal Maritime and Hydrographic Agency by order by order Bartels Preuss Test engineer head of laboratory Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency Test Report No.. 734.2/0043-1/2003 – S3220 print date: 30.01.03 page 2 of 192 Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency Test Report No.. 734.2/0043-1/2003 – S3220 print date: 30.01.03 page 3 of 192 General Applicant: Ferropilot GmbH Siemensstr. 35, 25462 Rellingen, Germany Equipment under test: Type: FA-100 Manufacturer: Furuno Electric Co. Ltd, Nishinomiya-City/ Japan Place of test: BSH test laboratory Hamburg, Room 916 Start of test: 18. February 2002 End of test: 5.12. 2002 Test standards: 1 IEC 61993-2 (2002) Maritime navigation and radiocommunication equipment and systems- Automatic Identification Systems Part 2: Class A shipborne equipment of the Universal Automatic Identification System (AIS) – Operational and performance requirements, Methods of testing and required test results IEC 61162-1/ -2 Maritime navigation and radiocommunication equipment and systems Digital Interfaces Part 1: single talker and multiple listeners (2000) Part 2: single talker and multiple listeners, high speed transmission (1998) Summary Test No. Reference Section Result (passed/ not passed / not applicable / not tested) 2 IEC 61993-2 14 Operational tests passed 3 IEC 61993-2 15 Physical tests Not included 4 IEC 61993-2 16 Specific tests of link layer passed 5 IEC 61993-2 17 Specific tests of network layer passed 6 IEC 61993-2 18 Specific tests of transport layer passed 7 IEC 61993-2 19 Specific presentation interface tests passed 8 IEC 61993-2 20 DSC functionality tests passed 9 IEC 61993-2 21 Long range funct…

Text truncated - open the document above for the full version.