ADB9ZWRTR092AMarine Radar

www.furuno.co.jp Installation Manual RADAR SENSOR DRS2D/DRS4D/ DRS4A/DRS6A/DRS12A/DRS25A SAFETY INSTRUCTIONS ............................................................................ i SYSTEM CONFIGURATION ....................................................................... ii EQUIPMENT LISTS.................................................................................... iv 1. MOUNTING ............................................................................................ 1 1.1Mounting Considerations .............................................................................................. 1 1.2Mounting Procedure for DRS2D/4D ............................................................................. 2 1.3Mounting Procedure for DRS4A/6A/12A/25A ............................................................... 3 1.4Mounting of Power Supply Unit PSU-013 (for DRS25A)/PSU-012 (Option) ................ 8 2. WIRING .................................................................................................. 9 2.1Wiring inside DRS2D/4D ............................................................................................ 12 2.2Wiring inside DRS4A/6A/12A/25A .............................................................................. 16 2.3Wiring inside Power Supply Unit PSU-013 (for DRS25A) .......................................... 20 2.4Wiring inside Power Supply Unit PSU-012 (Option) ................................................... 21 PACKING LISTS...................................................................................... A-1 OUTLINE DRAWINGS............................................................................. D-1 INTERCONNECTION DIAGRAMS.......................................................... S-1 i WARNING WARNING Wear a safety belt and hard hat when working on the antenna unit. Serious injury or death can result if someone falls from the radar mast. Model Distance to 100 W/m 2 point Distance to 10 W/m 2 point DRS4A Nil 1.20 m Nil 1.20 m The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the trans- mitting antenna at a close distance. Distances at which RF radiation levels of 100 and 10 W/m 2 exist are given in the table below. Note: If the antenna unit is installed at a close distance in front of the wheel house, your administration may require halt of transmission within a certain sector of antenna revolution. This is possible - Ask your FURUNO representive or dealer to provide this feature. CAUTION Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. Observe the following compass safe distance to prevent deviation of a ma gnetic compass. Ground the equipment to prevent electrical shock and mutual interference. Construct a suitable service platform from which to install the antenna unit. Serious injury or death can result if the power is left on or is applied while the equipment is being installed. Turn off the power at the mains switch-board before beginning the installation. Fire, electrical shock or serious injury can result if the power is left on or is applied while the equipment is being installed. Model Standard Steering DRS4A 0.80 m 0.50 m DRS6A 0.85 m 0.55 m Radio Frequency Radiation Hazard DRS6A SAFETY INSTRUCTIONS DRS12A DRS2D Nil 0.40 m 0.10 m 1.40 m DRS4D DRS4D 1.40 m 0.85 m DRS2D 1.35 m 0.80 m 0.20 m 2.40 m DRS12A (XN12A) DRS12A (XN13A) 0.20 m 1.90 m 1.15 m 0.70 m PSU-012 0.30 m 0.30 m PSU-013 0.30 m 0.30 m DRS25A 1.00 m 0.60 m 0.50 m 5.30 m DRS25A (XN12A) DRS25A (XN13A) 0.40 m 4.40 m ii SYSTEM CONFIGURATION DRS2D/4D/4A/6A/12A RADAR SENSOR DRS4A/DRS6A/DRS12A OR RECTIFIER RU-1746B 100/110/220/230 VAC 12-24 VDC NMEA 2000 Equipment : Standard Supply : Optional Supply : Local Supply Multi Function Display BlackBox MFDBB Multi Function Display MFD8/12 Power Supply Unit PSU-012* *The power supply unit PSU-012 is necessary in the combination of radar sensor and MFD. NMEA 2000 Equipment RADAR SENSOR DRS2D/DRS4D MFD8 MFD12 MFDBB DRS2D/4D DRS4ADRS6A DRS12A (future development) NO NO NO NO NO NO NO YES YES YES YES NO 12-24 VDC iii DRS25A RADAR SENSOR DRS25A OR RECTIFIER RU-1746B 100/110/220/230 VAC 12-24 VDC NMEA 2000 Equipment : Standard Supply : Optional Supply : Local Supply Multi Function Display BlackBox MFDBB Multi Function Display MFD8/12 Power Supply Unit PSU-013 12-24 VDC iv EQUIPMENT LISTS Standard supply NameTypeCode No.QtyRemarks Radar SensorXN10A-RSB-118-092-1For DRS4A, w/CP03-32601 XN12A-RSB-118-0931For DRS6A, w/CP03-32601 XN12A-RSB-118-094-1For DRS12A, 1255 mm, w/CP03-32601 XN13A-RSB-118-0941For DRS12A, 1795 mm, w/CP03-32601 XN12A-RSB-118-095-1For DRS25A, 1255 mm, w/CP03- 32601 XN13A-RSB-118-095-1For DRS25A, 1795 mm, w/CP03- 32601 DRS2D-1Radome, 2 kW, w/CP03-32101 DRS4D-1Radome, 4 kW, w/CP03-32101 Power Supply Unit PSU-013-1For DRS25A, w/SP03-16101 and CP03-32700 Installation Materials CP03-32101001-025-270 1 set For DRS2D/4D CP03-32601001-025-780 1 set For DRS4A/6A/12A/25A CP03-32200000-011-7201Two-way cable, MOD-ASW0001- 100+, 10 m, for DRS2D/4D/4A/6A/12A CP03-32300000-011-721Two-way cable, MOD-ASW0001- 150+, 15 m, for DRS2D/4D/4A/6A/12A CP03-32400000-011-722Two-way cable, MOD-ASW0001- 200+, 20 m, for DRS2D/4D/4A/6A/12A CP03-32500000-011-723Two-way cable, MOD-ASW0001- 300+, 30 m, for DRS2D/4D/4A/6A/12A CP03-32800000-011-990Two-way cable, MOD-ASW0002- 100+, 10 m, for DRS25A CP03-32810000-011-991Two-way cable, MOD-ASW0002- 150+, 15 m, for DRS25A CP03-32820000-011-992Two-way cable, MOD-ASW0002- 200+, 20 m, for DRS25A CP03-32830000-011-993Two-way cable, MOD-ASW0002- 300+, 30 m, for DRS25A v Optional supply NameTypeCode No.QtyRemarks Power Supply Unit PSU-012-1 set GasketOP03-203001-025-2901 For DRS2D/4D, 10 NMEA2000 cable OP03-205001-…

Text truncated - open the document above for the full version.

Federal Communications Commission Office of Engineering and Technology 445 12th Street, SW Washington, DC 20554 To whom it may concern, We hereby respectfully request that under the provision of KDB Publication 726920, the following documents submitted in support of this application for ADB9ZWRTR092A certification be provided with confidential status. Schematics Parts list/Tune up info Operational description These documents contain trade secrets that are treated as confidential by us. Substantial competitive harm to our company business could result should they be made available to the public. Best regards, Shane Ryan Type Acceptance Commercial Service FURUNO USA Inc. (360) 834-9300 X5060 (360) 834- 833-5195 [email protected]

Furuno Labotech International Co., Ltd. Document number: FLI 01-11-039 Date of issue: 10 June 2011 - Page 1 of 3 - Photographs of Furuno Radar Sensor DRS4A with Transceiver RTR-092A 1 External View 1.1 Front View (without Antenna Radiator) Furuno Labotech International Co., Ltd. Document number: FLI 01-11-039 Date of issue: 10 June 2011 - Page 2 of 3 - 1.2 Rear View ID Label is affixed on the Scanner case. Furuno Labotech International Co., Ltd. Document number: FLI 01-11-039 Date of issue: 10 June 2011 - Page 3 of 3 - 1.3 Name Plate (ID Label)

 Furuno Labotech International Document number: FLI 01-11-046 Date of issue: 10 June 2011 Form: Q053/01 - Page 1 of 2 - Identification of Equipment for the Furuno Radar Sensor RTR-092A (FCC Rule, 2.925) 1 ID Label The following nameplate is permanently fixed on the corresponding equipment unit. FCC ID: ADB9ZWRTR092A Material of Nameplate: Polyester film, 0.2 mm thick  Furuno Labotech International Document number: FLI 01-11-046 Date of issue: 10 June 2011 Form: Q053/01 - Page 2 of 2 - 2 ID Label Location ID Label is affixed on the Scanner case.

Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 1 of 9 - Photographs of Furuno Radar Sensor DRS4A with Transceiver RTR-092A 1 Internal View 1.1 Inside View (with Top cover opened, showing Scanner Motor (upper) and Transceiver RTR-092A (lower)) Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 2 of 9 - 1.2 Transceiver Top View Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 3 of 9 - 1.3 Transceiver Right Side View Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 4 of 9 - 1.4 Transceiver Top View (with Shield-cover removed, showing MD Board 03P9450 (upper) and PWR Board 03P9452 (lower)) Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 5 of 9 - 1.5 Transceiver Right Side View (with Shield-cover removed, showing Magnetron E3571) Magnetron MD Board Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 6 of 9 - 1.6 Transceiver Rear side View Isolator Limiter Filter Circulator Magnetron (Inside) Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 7 of 9 - 1.7 Transceiver Bottom View Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 8 of 9 - 1.8 Transceiver Bottom View (with Shield-cover removed) Furuno Labotech International Co., Ltd. Document number: FLI 01-11-040 Date of issue: 10 June 2011 - Page 9 of 9 - 1.9 Transceiver Bottom View (with shield-covers removed, showing SPU Board 03P9455 (upper) and NMEA2000 Board 03P9462 (lower)) RXM Module

This report shall not be reproduced except in full, without the written approval of Furuno Labotech International Co., Ltd. Test Report (FCC Rules 2.1046/2.1047/2.1049/2.1051/2.1053/2.1055/80.217) For Trade name: Furuno Model: Transceiver for Radar Sensor DRS4A Type: RTR-092A Report no.: FLI 12-11-071 Date of issue: 10 June 2011 Furuno Labotech International Co., Ltd. 1-16 Fukazu-cho, Nishinomiya-shi, Hyogo 663-8203, Japan Tel: +81-798-63-1094 Fax: +81-798-63-1098 Furuno Labotech International Report no.: FLI 12-11-071 Form: FQ053/04 Page 2 of 39 - Report Summary FLI project number: FLI 04-10-0337 Test report number: FLI 12-11-071 Date of Initial Issue: 10 June 2011 Revision number: --- Date of Revised Issue: --- Test report revision made: Rev. no. Date PageItemDescription of change --- --- --- --- --- Test standard(s)/ Test specifications: FCC 47 CFR, Sections: 2.1046 - RF Power Output, 2.1047 - Modulation Characteristics, 2.1049 - Occupied Bandwidth, 2.1051 - Spurious Emissions at Antenna Terminal, 2.1055 - Frequency Stability, 2.1053 - Field Strength of Spurious Radiation, 80.217 - Suppression of Interference Aboard Ships. (Date of issue: 1 October 2009) Customer: Furuno Electric Co., Ltd. 9-52 Ashihara-Cho, Nishinomiya-City, 662-8580 Japan Manufacturer: Furuno Electric Co., Ltd. 9-52 Ashihara-Cho, Nishinomiya-City, 662-8580 Japan Trade name: FURUNO Model: Transceiver for RADAR SENSOR DRS4A Type: RTR-092A Product function and intended use: For Maritime Safety Navigation Number of samples tested: One Serial number: 4387-0001 Power rating: 12 - 24 VDC, 8.7 - 5.5 A (for DRS4A + MFD8) Product status: Pre-production model Modifications made to samples during testing: None. Date of receipt of samples: 4 March 2011 Test period: 7 March 2011 to 28 April 2011 Place of test: Furuno Labotech International Co., Ltd. - Nishinomiya-Hama Lab. 2-20 Nishinomiya-Hama, Nishinomiya City, Hyogo Prefecture, 662-0934 Japan Anechoic Chamber used for the test has been registered by FCC. (File number: 90607) Test results/ Compliance: Passed. The test results of this report relate only to the samples tested. Tested by: Akira Inoue Written by: Akiko Inoue Verified by: Yoshihiro Ishii Approved by: Date: 10 June 2011 Name: Yoshihiro Ishii Title: Manager, Technical Section, Furuno Labotech International Co., Ltd. Signature: Furuno Labotech International Report no.: FLI 12-11-071 Form: FQ053/04 Page 3 of 39 - Testing Laboratory Status Furuno Labotech International Co., Ltd. (hereafter called FLI) has been holding the following status after having been assessed according to the provisions of ISO/IEC 17025 and/or the relevant rules: (1) Telefication Listed Testing Laboratory: - listed by Telefication B. V., Edisonstraat 12a, 6902 PK Zevenaar, The Netherlands - Laboratory assignment number: L116 - Date of initial listing: 26 July 1999 (*) - for testing the following product categories/ test standards: - EN 60945, IEC 61162-1/-2, and IEC 62288 for Maritime navigation and radiocommunication equipment and systems (2) BSH Recognized Testing Laboratory: - recognized by Bundesamt für Seeschifffahrt und Hydrographie, Bernhad-Nocht-Str. 78, 20359 Hamburg, Federal Republic of Germany - Recognition certificate number: BSH4613/06201/0835/08 - Date of initial recognition: 4 April 2003 (*) - for testing the following product categories/ test standards: - IEC/EN 60945, IEC 62388, IEC 61162-1/-2, and IEC 62288 for Marine navigational and radiocommunication equipment and systems (3) TÜV Appointed EMC Test Laboratory: - appointed by TÜV Rheinland Japan Ltd., 19-5 Shin Yokohama 3-chome, Kohoku-ku, Yokohama 222-0033 Japan - Laboratory assignment number: UA 50046428 - Date of initial appointment: 21 December 1998 (*) - for carrying out the tests of: - EN 55022, CISPR 22, EN 61000-3-2/-3, EN/IEC 61000-4-2/-3/-4/-5/-6/-8/-11, EN/IEC 61000-6-1/-2, EN/IEC 61000-6-3/-4, EN/IEC 60945, EN/IEC 61326-1, EN/IEC 61326-2-6, EN/IEC 60601-1-2, JIS T 0601-1-2, JIS C 1806-1, EN 55011, CISPR 11. (4) RMRS Recognized Testing Laboratory: - recognized by Russian Maritime Register of Shipping, 8, Dvortsovaya Nab., St. Petersburg, 191186 Russia - Laboratory recognition number : 09.00110.011 - Date of initial recognition : 27 January 2009 (*) - for carrying out testing in the field of : 21001301 Elecrtrical measurements and tests, 21001302 EMC tests, 21001500 Mechanical measurements and tests, 21002000 Equipment protection degree tests, and 21002100 Climatic tests for Ship’s radio and navigational equipment and IEC 60945 : 2002 Note: (*) – The current certificates may be found in the FLI web site (http://www.furuno-labotech.co.jp). Furuno Labotech International Report no.: FLI 12-11-071 Form: FQ053/04 Page 4 of 39 - TABLE OF CONTENTS Testing Laboratory Status ............................................................................................................. 3 1 Principal Information ................................................................................................................... 5 1.1 Equipment under test (EUT) ................................................................................................... 5 1.2 Observation and comments .................................................................................................... 8 2 Test Results Summary ................................................................................................................ 8 3 Test Results .................................................................................................................................. 9 3.1 RF Power Output (FCC Rule, 2.1046) ..................................................................................... 9 3.2 Modulation Characteristics (FCC Rule, 2.1047) ....................................................................... 9 3.3 Occupied Bandwidth (FCC Rule, 2.1049) .............................................................................. 10 3.4 Frequency Stability (FCC Rule, 2.1055) ...…

Text truncated - open the document above for the full version.