AFJIC-F4G-2UHF-FM Hand Held Transceiver

INSTRUCTION MANUAL This device complies with Part 15 ofthe FCC Rules. Operation is subject tothe condition that this device does notcause harmful interference. iF4TRUHF TRUNKED RADIO Count on us! 6-9-16 Kamihigashi, Hirano-ku, Osaka 547-0002 Japan A-5632?-1USPrinted in Japan© 1999 Icom Inc. 4 SPECIFICATIONS AND OPTIONS 4-1 Specifications• GENERALFrequency coverage (MHz) : 400–430, 450–490, 480–512 Mode : 16K0F3E (25 kHz) 11K0F3E (12.5 kHz) Usable temperature range : –30 ̊C to +60 ̊C; –22°F to +140°F Dimensions (proj not incl.) : 57(W) × 140(H) × 37 (D) mm ; 2 1 ⁄ 4 (W) × 5 1 ⁄ 2 (H) × 1 15 ⁄ 32 (D) in Weight (with BP-196) : 390 g; 13.8 oz • TRANSMITTEROutput power : 4 W • RECEIVERSensitivity (12 dB SINAD) : 0.3 μV Intermodulation rejection ratio : 75 dB typ. Spurious response rejection : 70 dB typ.Adjacent channel selectivity : 70 dB typ. (25 kHz) 65 dB typ. (12.5 kHz) Audio output power : 500 mW (at 5% distortion with an 8 Ω load) 4-2 Options• HM-46/HM-54/HM-75A SPEAKER-MICROPHONES Combination speaker-microphone that provides convenient opera-tion while hanging the transceiver from your belt clip. • BC-119 DESKTOP CHARGER + AD-81 CHARGER ADAPTER Used for rapid charging of battery packs. Charging time: 1.5 to 2hours. An AC adapter is supplied with the chargers (depending onversion). • BC-121 MULTI-CHARGER + AD-81 CHARGER ADAPTER + BC-124 AC ADAPTER Rapidly charges of up to 6 battery packs (six AD-81’s are required)at once. Charging time: 1.5 to 2 hours. • BC-133 DESKTOP CHARGER Regularly charges battery pack with/without transceiver. The ACadapter, BC-122, is additionally required. Charging time: approx. 15hours • BC-110A/D/V WALL CHARGER Used for charging via a domestic AC wall socket. •CP-12L CIGARETTE LIGHTER CABLE Used for charging via a vehicle’s cigarette lighter socket (12 V). •OPC-254L DC POWER CABLE Used for charging with an external power supply. •BP-194 BATTERY CASE Takes eight (8) AA (R6) size batteries. External DC-jack on thetransceiver can be used to charge the Ni-Cd battery cells. •SP-13 EARPHONE Provides clear audio in noisy environments. All stated specifications are subject to change without notice orobligation. IMPORTANTREAD ALL INSTRUCTIONS carefully and completely before using the transceiver.SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating instructions for the IC-F4TR . EXPLICIT DEFINITIONSNEVER allow the antenna to come close to, or touch, exposed body parts, especially the face or eyes while trans-mitting. NEVER disassemble the transceiver. incorrect reassemble may result in a fire hazard or electric shock. NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive area. AVOID the use of chemical agents such as benzene or alco- hol when cleaning—use a water-dampened cloth only. For U.S.A. onlyCAUTION: changes or modifications to this transceiver, not expressly approved by icom inc., could void your authority tooperate this transceiver under fcc regulations. TABLE OF CONTENTSIMPORTANTEXPLICIT DEFINITIONSTABLE OF CONTENTSSUPPLIED ACCESSORIES1 PANEL DESCRIPTION2 GETTING STARTED 2-1 Accessory attachment . . . . . . . . . . . . . . . . . . . . 2-12-2 Turning POWER ON . . . . . . . . . . . . . . . . . . . . .2-2 3 BATTERY PACKS AND BATTERY CASE 3-1 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13-2 Battery case . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-23-3 Battery charging . . . . . . . . . . . . . . . . . . . . . . . . .3-3 4 SPECIFICATIONS AND OPTIONS 4-1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14-2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 SUPPLIED ACCESSORIESq Battery pack (comes attached to the transceiver) w Flexible antenna e Belt clip r 1922 A-REAR SHEET 3-1 CautionNEVER incinerate used battery packs or battery cells. Internal battery gas may cause an explosion.NEVER immerse the battery pack or the battery case in water. If the battery pack or case becomes wet, be sure towipe it dry BEFORE attaching it to the transceiver. NEVER short terminals of the battery pack or battery case. Also, current may flow into nearby metal objects so be carefulwhen placing battery packs in handbags, etc.If your battery pack seems to have no capacity even afterbeing charged, completely discharge it by leaving the powerON overnight. Then, fully charge the battery pack again. If thebattery pack still does not retain a charge (or very little), anew battery pack must be purchased. D Recycling information (U.S.A. only) The product that you have purchased contains a recharge-able battery. The battery is recyclable. At the end of its life, under various state and local laws, it may be ille-gal to dispose of this battery into the municipalwaste stream. Call 1-800-822-8837 for batteryrecycling options in your area or contact yourdealer. 3-2 Battery caseWhen using the optional BP-194attached to the transceiver, in-stall 8 AA (R6) size Alkaline orNi-Cd batteries as illustrated asat right.When installing Ni-Cd batteries:• Make sure all cells are the same brand, type and capacity. • Never mix old and new batteries. Either of the above may cause a fire hazard or damage thetransceiver. When installing dry or alkaline cells:• Never connect DC power to the transceiver. Such a con- nection always charges the installed batteries and will dam-age the transceiver. D LOW BATTERY INDICATION- When appears, battery capacity is becoming low and transmitting is impossible. - When flashes, battery capacity is nearly exhausted. 3-3 Battery chargingPrior to using the transceiver for the first time, the batterypack must be fully charged for optimum life and operation. CAUTION: To avoid damage to the transceiver, turn it OFF while charging. • Recommended temperature range for charging: +10°C to +40°C (+50°F to +104°F) • Use the Icom’s charger (BC-119/BC-121 for rapid charging, BC- 110, and BC-133 for regular charging) only. NEVER use another manufact…

Text truncated - open the document above for the full version.

ANT D1,D2,D8 Q1 Q2 Q3 D3,D4 Q403 Q4 Q6 Q7,Q8 X1 Q17 IC5 Q10 Q15,Q16,D26 FI2 Q5 FI1 Q14 Q34 45.9MHz Q12 Q13 D32,D33 IC3A,Q37 D401,D11,D12 D10 IC11 IC10 IC6 Q20 Q21 IC3B Q18,Q19 Q31,D27 IC10 MIC JACK SP JACK POW ER SW Q22 IC3D IC3C Q35Q36IC12 IC7 X29.2MHz J 6 H I FG E PLL ICIC1 VCO C D REF 15.3MHz 6 B A OPTION UNIT J5 2TONE or 5TONE 5 PTT AFREGPTTCONT SIGOUT VCC FRQCON DBAL DEV MIC,AF,PTT,MMUTRMUT,AFONOP IF DET IC DET IC2 SQL 46.35MHz APC TXC T2 PWRDET 534 RESET +5CPU VCC IC8 S5C S5CONT T3T4 T1 T4 CPU5 ANALOG S5REGREG R5S5 IC4 SDNOIS CPU5 450kHz 5V 43 VR CLONEOPTAF OUTSP EXT.MIC SP 2 BATTGNDBDET ENPHA VCC PRE MIC AMP SW R5 T5REG T5 CTCSSTONE RMUT MMUT CPU DTMFMTONECTCSSDTCS R5CT5C LCD KEY MATRIX EEPROM 2 J 1 H I MODEL FX-2252 1999.12. 9 FG CHKD. DWN.BY: DATE E APPD. C D 78 .. .. COMMON LINETX LINERX LINE 1 AB REVISSIONS 12 .. .. 3456 ..... ... 9 121011 . .... ... ICOM DWN.NO. Icom Inc. BLOCK DIAGRAM -5B1

5-1 PREPARATION When you adjust the contents on page 5-5 or 5-6, SOFTWARE ADJUSTMENT, the optional CS-F3G ADJ ADJUSTMENTSOFTWARE (Rev. 1.0 or later), OPC-478 CLONING CABLE and a JIG CABLE (see illustration at page 5-2) are required. nREQUIRED TEST EQUIPMENT 5 - 1 SECTION 5ADJUSTMENT PROCEDURES EQUIPMENT DC power supply RF power meter (terminated type) Frequency counter FM deviation meter Digital multimeter GRADE AND RANGE Output voltage: 7.2 V DC Current capacity: 5 Aor more Measuring range: 1–10 W Frequency range: 120–500 MHz Impedance: 50 ½ SWR: Less than 1.2 : 1 Frequency range: 0.1–500 MHz Frequency accuracy: ±1 ppm or better Sensitivity: 100 mV or better Frequency range: DC–500 MHz Measuring range: 0 to ±5 kHz Input impedance: 10 M½/V DC or better EQUIPMENT Audio generator Attenuator Standard signal generator (SSG) DC voltmeter Oscilloscope AC millivoltmeter GRADE AND RANGE Frequency range: 300–3000 Hz Output level: 1–500 mV Power attenuation: 40 or 50 dB Capacity: 10 W or more Frequency range: 120–500 MHz Output level: 0.1 μV–32 mV (–127 to –17 dBm) Input impedance: 50 k½/V DC or better Frequency range: DC–20 MHz Measuring range: 0.01–20 V Measuring range: 10 mV–10 V nSYSTEM REQUIREMENTS • IBM PC compatible computer with an RS -232C serial port (38400 bps or faster). • Microsoft Windows 95 or Windows 98 • Intel i486DX processor or faster (Pentium 100 MHz or faster recommended) • At least 16 MB RAM and 10 MB of hard disk space • 640 ́480 pixel display (800 ́600 pixel display recommend- ed) nADJUSTMENT SOFTWARE INSTALLATION NOTE:Before using the program, make a backup copy of the original disk. After making a backup copy, keep the orig- inal disk in a safe place. Boot up Windows. - Quit all applications when Windows is running. Insert the backup disk1 into the appropriate floppy drive. Select ‘Run’from the [Start] menu. Type the setup program name using the full path name, then push the [Enter] key. (A:\ setup) Follow the prompts. Program group ‘CS-F3G ADJ’appears in the ‘Programs’ folder of the [Start] menu. nSTARTING SOFTWARE ADJUSTMENT 1Connect IC-F3GT/GS and PC with the optional OPC-478 and the JIG cable. 2Boot up Windows, and turn the transceiver power ON. 3Click the program group ‘CS-F3G ADJ’in the ‘Programs’ folder of the [Start] menu, then CS-F3G ADJ’s window is appeared. Click ‘Connect’ on the CS-F3G’ s window , then appears IC-F3GT/GS’ s up-to-date condition. 4 Set or modify adjustment data as desired. IBM is a registered trademark of International Bussiness Machines Corporation in the U.S.A. and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Screen shots produced with permission from Microsoft Corporation. All other products or brands are registered trademarks or trademarks of their respective holders. 5-1 PREPARATION When you adjust the contents on page 5-5 or 5-6, SOFTWARE ADJUSTMENT, the optional CS-F3G ADJ ADJUSTMENTSOFTWARE (Rev. 1.0 or later), OPC-478 CLONING CABLE and a JIG CABLE (see illustration at page 5-2) are required. nREQUIRED TEST EQUIPMENT 5 - 1 SECTION 5ADJUSTMENT PROCEDURES EQUIPMENT DC power supply RF power meter (terminated type) Frequency counter FM deviation meter Digital multimeter GRADE AND RANGE Output voltage: 7.2 V DC Current capacity: 5 Aor more Measuring range: 1–10 W Frequency range: 120–500 MHz Impedance: 50 ½ SWR: Less than 1.2 : 1 Frequency range: 0.1–500 MHz Frequency accuracy: ±1 ppm or better Sensitivity: 100 mV or better Frequency range: DC–500 MHz Measuring range: 0 to ±5 kHz Input impedance: 10 M½/V DC or better EQUIPMENT Audio generator Attenuator Standard signal generator (SSG) DC voltmeter Oscilloscope AC millivoltmeter GRADE AND RANGE Frequency range: 300–3000 Hz Output level: 1–500 mV Power attenuation: 40 or 50 dB Capacity: 10 W or more Frequency range: 120–500 MHz Output level: 0.1 μV–32 mV (–127 to –17 dBm) Input impedance: 50 k½/V DC or better Frequency range: DC–20 MHz Measuring range: 0.01–20 V Measuring range: 10 mV–10 V nSYSTEM REQUIREMENTS • IBM PC compatible computer with an RS -232C serial port (38400 bps or faster). • Microsoft Windows 95 or Windows 98 • Intel i486DX processor or faster (Pentium 100 MHz or faster recommended) • At least 16 MB RAM and 10 MB of hard disk space • 640 ́480 pixel display (800 ́600 pixel display recommend- ed) nADJUSTMENT SOFTWARE INSTALLATION NOTE:Before using the program, make a backup copy of the original disk. After making a backup copy, keep the orig- inal disk in a safe place. Boot up Windows. - Quit all applications when Windows is running. Insert the backup disk1 into the appropriate floppy drive. Select ‘Run’from the [Start] menu. Type the setup program name using the full path name, then push the [Enter] key. (A:\ setup) Follow the prompts. Program group ‘CS-F3G ADJ’appears in the ‘Programs’ folder of the [Start] menu. nSTARTING SOFTWARE ADJUSTMENT 1Connect IC-F3GT/GS and PC with the optional OPC-478 and the JIG cable. 2Boot up Windows, and turn the transceiver power ON. 3Click the program group ‘CS-F3G ADJ’in the ‘Programs’ folder of the [Start] menu, then CS-F3G ADJ’s window is appeared. Click ‘Connect’ on the CS-F3G’ s window , then appears IC-F3GT/GS’ s up-to-date condition. 4 Set or modify adjustment data as desired. IBM is a registered trademark of International Bussiness Machines Corporation in the U.S.A. and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Screen shots produced with permission from Microsoft Corporation. All other products or brands are registered trademarks or trademarks of their respective holders. 5-1 PREPARATION When you adjust the contents on page 5-5 or 5-6, SOFTWARE ADJUSTMENT, the optional CS-F3G ADJ ADJUSTMENTSOFTWARE (Rev. 1.0 or later), OPC-478 CLONING CABLE and a JIG CABLE (see illustration at page 5-2) are required. nREQUIRED TEST EQUIPMENT 5 - 1 SECTION 5ADJUSTMENT PROCEDURES EQUIPMENT DC po…

Text truncated - open the document above for the full version.

N 1 0 L1 14N R182K C8 0.001 MP52078 ANT HC40.5P HC20.5P L2 14N C3 7P C666 4P L M C19 0.001 C2880.001 C204 47P C28947P C214.7 T5 L240.22U D1 1SV307 R160100 JK L26 EXCCL3225U C471 47P C14 0.01 R445 220 VCC C472 47P C1005 R1310 2GE HC20 0.001 ECU10 H I T5VCC R23 100 R15 10K 2GE R21220 R19 100 2GE F G D5 HVU350 R4112.7K R417 3.3K R4103.3K C413 7P R413 4.7 Q8 2SC5085 L404 1.8U L124.7U R414 390 C414 5P C57347P C1005 C410 12P C412 6P L11MC152 C671 0.001 ECU10 C416 470P C417 0.3P C673 47P ECU10 C491 1 R416 3.3K C411 6P DE R302.2K C50 10 123 4 5 6 Q11 XP6501 LV Q34 2SK880 Y C560 47P C496 0.0047 R512 2.7K VCON 1 GND 2 OUT 3 VCC 4 X4 CR-662 C6310P R185 1K 2GE R186 47K 2GE C234 0.001 C1005 C233 0.001 C1005 R184 10K 2GE C R51 470K FRQCONDBAL T5VCCCPU5S5 W10JPW C71 0.001 R49 39K 1 3 4 52 IC13 TA75S01F C495 0.1 C1005 R473 47 2GE R50 390K R48 100K 2GE C72 4.7 HC576 47P ECU10 1 0 AB 9 AUX GND MOWN P TTIN P TTOUT MICOUT MICIN SIGOU T OPT1 OP T2 OP T3 OP V3 OP V2 OP V1 BUS Y BUSY VCC1 1 IN1 2 ENB 3 CLK 4 DATA 5 T1 6 LOK 7 CP1 8 FI1 9 FO1 10 FO2 11 FI2 12 CP2 13 GND2 14 XO 15 XI 16 XB 17 VCC2 18 IN2 19 GND1 20 IC1 UPD3140 C62 6P SCKUNLKPLSTSOLVINDEV R5S5CPU5 C50110 L14 15N C55 0.01 C1005 R41 47 2GE C57247P C1005 C616P C600.001 C1005 R526 1K 2GE R527 1K 2GE R529 1K 2GE R528 1K 2GE C291 0.1 C1005 R208 100K C47 0.1 C481 R32 6.8K R8447 C571 47P C1005 C54 0.001 C1005 C218 0.001 C1005 C443 0.047 ECU10 R33 3.9K 2GE R34 1K 2GE R209 100K D403 HVU350 Q402 DTC144EU D4041T365 C229 0.001 C4236P C427 0.5P C4227P Q7 2SC5085 L406 1.8U L4074.7U C2114.7 R500 100K C424 47P C426 0.001 R420 470 R421 10K 2GE R511 39K 2GE R422 120K C420.001 C1005 321 5 4 Q401XP1214 L405MC152 C419 0.3P R501 #10K C418 9P ECU10 C4751.5P ECU10 C421 20P R14100 D3MA77 D4 MA77 R18 47K C2812P C30 12P R20 68K C32 470P C33 470P R22 68K C473 47P C31 5P C486 5P R5 1LO S5 R504 330 Q6 2SC5107 O Q5 2SC5107 O Q4 2SC5107 O C45210P L8 27N L927N R17 4.7K 2GE C260.001 C1005 C27 5P R465 33 C29 470P C670 470P C18 470P C17 0.001 Q3 2SC3585 C492 10P C24 470P R446 56K Q2 2SK2973 Q4032SC5107 O HC2802P C22 12P C552 0.001 HR255 47 W12JPW L712N R12 4.7K 2GE R502 1K 2GE C6590.001 L411 15N C25 4P HR8 6.8K 2GE R457 100 2GE R9 10K 2GE R7 100 2GE C100.001 R1621K R3 15K C13 0.001 D33 RB706 R2 15K D32RB706 R161 1K C9 0.001 C205 0.001 C251 0.001 Q1 2SK2974 W11 JPW C12 0.001 L31 4.9N C551 0.001 W5 MJ-0.1 L4 14N HC2786P C285 24P R458 1K R522 10 C11 6P C467 9P C15 39P ECU10 9 C2520.001 S5 78 R210 2.2K C2430.001 TXC T4 Q37 DTA144EU R163 10K R5233.9K 2GE R524 NTCCM1608 223KC R55 1K C73 0.1 R53 10K R54150K C1790.01 R251330K D2MA77 D29MA8030H C574 0.001 L15 14N C75 0.1 C1005 C558 47P C1005 C76 7P L22 14N C5210P W15 2GE-JPW R52 150K R530 100 2GE 1 23 114 IC3ANJM3403AV D10 HVU350 R62220K C84 47P R63 10K C4040.001 C403 47P C406 8P R2524.7K L18 8.2N R401100K C88 0.001 R402 47K C405 6P Q12 3SK239A T1 R25833K C1008P L17 8.2N C85 7P R59 150 C87 47P D401 HVU350 C79 1.5P D8 MA77 C784P C86 5P R68 10K C90 0.001 R69 1K C990.001 C407 47P L402 8.2N R404220KR40510K D11 HVU350 D12 HVU350 R64220K R66 150K R67 10K L19 8.2N R61 47 R448 12 C455 10P C890.5P C940.5P C9822P T2 T3 T4 R70 4.7K C555 5P C559 47P C557 47P C97 6P C92 8P C91 6P C96 8P R447 470 2GE R449 470 2GE R65 10K 2GE C93 47P ECU10 C95 47P ECU10 L2133N R77 100 R72 47K L200.82U C1080.01 R253470 Q142SC4215 HC506 47P C10747P Q13 3SK239A C1090.001 R75180 C106 15P R464 1K C56147P C1005 R81 1K 2GE R80 120K 2GE C111 0.001 C1005 FI1 #FL-313 C450 #5P C110 #20P R79#180 C104 0.001 C1005 C105 47P C1005 R262 1 R469 F (DET) R83 330 OSCIN 1 OSCOUT 2 MIXOUT 3 VCC 4 IFIN 5 DEC 6 FILOUT 7 FILIN 8 AFOUT 9 QUAD 10 IFOUT 11 RSSI 12 N-DET 13 N-REC 14 GND 15 MIXIN 16 IC2 TA31136FN C118 0.001 C120 0.1 C1191 C114 0.001 C117 0.001 X3 CDBCA450CX24 C113 0.001 C112 0.001 C67 3P D ET SD NO IS C664 0.001 C1005 FI2 #SFPC450G R82 #3.9K C115100P R518 1K 2GE R85 1.5K R244 100K 2GE HC676 C116 #100P ECU10 C122220P R891.2K R90680K Q10 2SC4116 R136 100 C121 220P C5110P L25 0.82U C53 15P C65 4P C66 7P C560.01 C1005 L131.0U R88 #33K R87 #2.2K R86 #47K HR263 47K 2GE 78 GND AFOUT DISCIN 5 V V CC RXMU TE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516 17 18 19 20 21 22 23 24 25 26 27 28 29 30 J5 AXN330C038 C2230.01 C2240.01 SO SCK S I MICMUTE AFONOP BEEPOU T CCS C IRQ REM RMU T MMUT C562 47P 6 SPEAKER SP1 W1 TO J6 12 VCCR5S5 MICVOLIN CPU5PTTOUTPTTIN D R131 470 Q17 UN911H R130 100K C147 0.1 PTT C154 10 R5101K C554 470P C563 47P C56747P C 8 9 10 IC3C C126 0.0027 R93 27K C125 0.0022 C133 0.1 R104100K C209 0.1 R109 10K 2GE R509 10K 2GE C2170.1 C1005 C1240.01 C556 47P C1005 R177 1K C132 0.0056 C663 0.047 R516 15K R105 #470 R1763.9K C665 47P C1005 R108 180K C134180P VOLIN 7 6 5 IC3B R94 1M I/O 1 O/I 2 O/I 3 I/O 4 CONT.B 5 CONT.C 6 VEE 7 I/O 8 O/I 9 O/I 10 I/O 11 CONT.D 12 CONT.A 13 VDD 14 IC4BU4066BCFV R95 1M R9647K R506 1K L441 1U R508 1K 2GE C672 47P ECU10 C674 47P ECU10 R507 1K 2GE R503 10K 2GE R257 1 VCCS5 14 13 12 IC3D R97 220K R98 180K C212 0.01 C2132.2 C214 0.033 R113 68K R168 10K R159100K R170 10K R112 1M C128 1 R505 1K R114 #33K R44 #10K R107 150K C136 0.0056 R169 10K VCC C129 15 R120 68K D26 DAN202K C139 0.1 C135 180P R117 1.5K R145 1M AFONOP AFON R1161K 2GE R115 120K 2GE C137 #0.033 R100 2.2K R99 22K R178 3.3K Q15 2SB1132 R126 10K C145 10 R122 2.7K 123 4 5 6 Q16 XP6501 C140 0.1 R121 1K NC 1 VCC 2 NC 3 VIN 4 RIPPLE 5 NF 6 PHASE 7 PREGND 8 PW GND 9 POUT 10 IC5 TA7368F C1490.1 C146 0.22 R123 3.3K 6 R128 10 R127 33 C150 10 C152 0.047 C151 47P C153100 5 AFOUT DS2 LNJ310M6URA DS3 LNJ310M6URA R204 3.3K Q25 2SC4116 VOLOUT DTMF M TONE PTT SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 VCCCPU5CTCINREMOVOLOUTAFOUTTEMPS R102 10 R182 NTCCF20124AH R181 100K C231 0.1 PB0/AN0 1 PB1/ AN1 100 VCC 76 PD0/SEG41 77 P97/SEG40 75 PD1/SEG42 78 AVSS 2 TEST 3 X2 4 X1 5 VSS 6 OSC1 7 OSC2 8 RES 9 NMI 10 P20/IRQ4/ADTRG 11 P21/SCK1 12 P22/SI1 13 P23/SO1 14 P24/SCK3 15 P25/RXD 16 P26/TXD 17 P27/IRQ0 18 P17/IRQ3/TMIF 19 P16/IRQ2 20 P15/IRQ1 21 P14 22 P13/TMIG 23 P12/TMOFH 24 P11/TMOFL 25 P10/ TMOW 26 VSS 27 V3 28 V…

Text truncated - open the document above for the full version.

FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 Date: February 15, 2000 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Icom Incorporated Equipment: IC-F4GT-2 and IC-F4GS-2 FCC ID: AFJIC-F4G-2 FCC Rules: 22, 74, 90, 95, 95A Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. Filing fees are attached. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, William H. Graff, Director of Engineering enclosure(s) cc: Applicant WHG/cvr FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 LIST OF EXHIBITS (FCC CERTIFICATION (TRANSMITTERS) - REVISED 9/28/98) APPLICANT: Icom Incorporated FCC ID: AFJIC-F4G-2 BY APPLICANT: 1. LETTER OF AUTHORIZATION 2. IDENTIFICATION DRAWINGS, 2.1033(c)(11) LABEL LOCATION OF LABEL COMPLIANCE STATEMENT LOCATION OF COMPLIANCE STATEMENT 3. PHOTOGRAPHS, 2.1033(c)(12) 4. DOCUMENTATION: 2.1033(c) (3) USER MANUAL (9) TUNE UP INFO (10) SCHEMATIC DIAGRAM (10) CIRCUIT DESCRIPTION BLOCK DIAGRAM PARTS LIST ACTIVE DEVICES 5. PART 90.203(e) & (g) ATTESTATION BY M.F.A. INC. A. TESTIMONIAL & STATEMENT OF CERTIFICATION B. STATEMENT OF QUALIFICATIONS FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 Sub-part 2.1033(c): EQUIPMENT IDENTIFICATION FCC ID: AFJIC-F4G-2 NAMEPLATE DRAWING ATTACHED, EXHIBIT 1. LOCATION AS PER LABEL DRAWING(S) DATE OF REPORT February 15, 2000 SUPERVISED BY: William H. Graff, Director of Engineering FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 THE APPLICANT HAS BEEN CAUTIONED AS TO THE FOLLOWING: 15.21 INFORMATION TO USER. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) SPECIAL ACCESSORIES. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 TABLE OF CONTENTS RULE DESCRIPTION PAGE . Test Report 1 2.1033(c) General Information Required 2 2.1033(c)(14) Rule Summary 5 . Standard Test Conditions and Engineering Practices 6 2.1046(a) Carrier Output Power (Conducted) 7 2.1046(a) R. F. Power Output (Radiated) 9 2.1051 Unwanted Emissions (Transmitter Conducted) 11 2.1053(a) Field Strength of Spurious Radiation 15 2.1049(c)(1) Emission Masks (Occupied Bandwidth) 18 90.214 Transient Frequency Behavior 23 2.1047(a) Audio Low Pass Filter (Voice Input) 29 2.1047(a) Audio Frequency Response 32 2.1047(b) Modulation Limiting 34 2.1055(a)(1) Frequency Stability (Temperature Variation) 36 2.1055(b)(1) Frequency Stability (Voltage Variation) 39 2.202(g) Necessary Bandwidth and Emission Bandwidth 40 FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 PAGE NO. 1 of 40. Required information per ISO/IEC Guide 25-1990, paragraph 13.2: a) TEST REPORT b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) M. Flom Associates, Inc. 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85224 c) Report Number: d0020046 d) Client: Icom America, Inc. 2380 - 116th Ave. N. E. P.O. C-90029 Bellevue, Washington 98009-9029 e) Identification: IC-F4GT-2 and IC-F4GS-2 FCC ID: AFJIC-F4G-2 Description: UHF FM Handheld Transceiver f) EUT Condition: Not required unless specified in individual tests. g) Report Date: February 15, 2000 EUT Received: January 18, 2000 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: William H. Graff, Director of Engineering n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. FCC ID: AFJIC-F4G-2 MFA p0010010, d0020046 PAGE NO. 2 of 40. LIST OF GENERAL INFORMATION REQUIRED FOR CERTIFICATION IN ACCORDANCE WITH FCC RULES AND REGULATIONS, VOLUME II, PART 2 AND TO 22, 74, 90, 95, 95A Sub-part 2.1033 (c)(1): NAME AND ADDRESS OF APPLICANT: Icom Incorporated 1-6-19 Kamikurazukuri Hirano-ku Osaka, Japan 547 MANUFACTURER: Applicant (c)(2): FCC ID: AFJIC-F4G-2 MODEL NO: IC-F4GT-2 and IC-F4GS-2 (c)(3): INSTRUCTION MANUAL(S): PLEASE SEE ATTACHED EXHIBITS (c)(4): TYPE OF EMISSION: 11K0F3E (c)(5): FREQUENCY RANGE, MHz: 440 to 470 (c)(6): POWER RATING, Watts: 1 to 4 x Switchable Variable N/A FCC GRANT NOTE: BF - The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. (c)(7): MAXIMUM POWER RATING, Watts…

Text truncated - open the document above for the full version.

FCC ID: AFJIC-F4G-2 MFA p0010010, d0040007 PAGE NO.9 of 40. AMENDED April 5, 2000 NAME OF TEST: R. F. Power Output (Radiated) SPECIFICATION: 47 CFR 2.1046(a) TEST EQUIPMENT: As per attached page MEASUREMENT PROCEDURE (RADIATED) 1. The EUT was placed on an open-field site and its radiated field strength at a known distance was measured by means of a spectrum analyzer. Equivalent loading was calculated from the equation P t =((E x R) 2 /49.2) watts, whereR=3m. 2. Measurement accuracy is±1.5 dB. MEASUREMENT RESULTS g0040005: 2000-Apr-05 Wed 10:55:00 STATE: 2:High Power FREQUENCY TUNED, MHz FREQUENCY EMISSION, MHz METER, dBuV/m CF, dB ERP, dBm ERP, Watts EIRP, Watts 440.100000 440.098000 110.96 23.78 37.4 5.50 9.02 455.100000 455.098000 109.85 23.77 36.2 4.17 6.84 469.900000 469.895000 110.08 23.74 36.4 4.37 7.17 NOTE:The above Radiated Power Output used antenna as supplied by manufacturer with 4 watts delivered to antenna.