AL8-BB903PBluetooth Headphones

TIPS Z109 N10687 © 2010 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. U.S. Patents Pending 83987-21 (06/10) AM83988-21 TAKE A GOOD LOOKCONNECT TO YOUR PHONE 1. READY Activate the Bluetooth feature on your device, then get it to add / search for / discover new Bluetooth devices. Phones have different menus to select from: iPhone: Settings > General > Bluetooth > On (starts the search for devices) BlackBerry® smartphone: Settings/options > Bluetooth: On > Search for devices VIDEO TUTORIAL: www.plantronics.com/pairing 3. CONNECT Select “PLT_BB903+” from the list of Bluetooth devices shown on your device. If device asks for a passcode, enter four zeros (0000). You may see **** on screen. Some devices also ask to confirm connection after pairing. The headphone's LED will stop flashing red/blue once successfully paired/connected. You can now make a call using your device’s keypad or voice-dialing feature. NEED MORE HELP? 24-hour support in USA: 1-866-363-BLUE (2583) Online user guide: www.plantronics.com/documentation 1-year limited warranty details: www.plantronics.com/warranty Stay Near Your Device: Bluetooth has a working “range” of up to 30 feet between the device and headphones before audio degrades and the connection is lost. For best audio reception, keep your device on the left side of your body. Know How to Reconnect: Your headphones try to reconnect a lost connection. If they can’t, then tap the Call button once or manually reconnect via the device’s Bluetooth menu. ADJUST THE FIT Understand the Lights You See: The LED will advise status of headphones. • Charging (solid red) • Fully charged (solid blue) • Low battery (2 red flashes every 15 minutes) • On a call (blue flash every 2 seconds) • Missed call (3 purple flashes. Repeats for 5 minutes or until cancelled.) • Pairing mode (repeating red/blue flashes) GET STARTED BackBeat ® 903 + Bluetooth ® Headphones Bluetooth wireless technology provides a way for devices, like headphones and phones, to communicate with each other without wires. “Pairing” is the set-up process of introducing your headphones to your phone. Before using your headphones for the first time, you must pair them with your Bluetooth- enabled phone. Pairing is a one-time process unless your phone loses the connection or you want to pair to a new phone. 2. SET First time, right out of the box: With headphones turned off, activate Bluetooth pairing mode by pressing Power/Pairing button on. The LED flashes red/blue to indicate pairing mode. Pairing new phone/reconnecting original: With headphones turned off, press Power/Pairing button until the LED flashes red/blue. 1. READY2. SET3. CONNECT Check the Battery Level: If you are on a call or listening to music and hear 3 high tones then you have under 5 minutes talk time remaining. At other times, you can check the battery level by tapping the Power button. The headphones will say how many hours of of use remain. The LED also flashes red to show the charge level. 1 flash = more than 2/3 full 2 flashes = 1/3 - 2/3 full 3 flashes = less than 1/3 full For the best sound performance and a secure, comfortable fit, be sure to adjust the headphones to rest gently in your ear and drape around the back of your neck. 1. Drape the stereo cable behind your neck. 2. Guide one earpiece behind your ear and secure the eartip inside your ear using the telescoping/swivel adjustments. 3. Repeat step 2 with the other earpiece and continue to adjust the fit in either ear until both eartips rest comfortably and securely in your ears. MUSIC BUTTON • Play/Pause (1 tap) • Bass Boost (2-second press) • Mute Music or Call (1 tap) • Enable/disable OpenMic™ to pause music and activate mic (1 tap) POWER/PAIRING BUTTON • On/Off (2-second press to turn on, 4 second press to turn off) • Activate pairing mode after initial set up (press until red/blue LED flashes) • Check battery level (1 tap) VOLUME/TRACKING BUTTONS • Volume Up/Down (1 tap per level change) • Track Forward/Back (2-second press per track change) CALL BUTTON • Take a call or end it (1 tap) • Redial (2 taps) • Initiate phone’s voice-dialing (2-second press until tone is heard) • Reconnect lost Bluetooth connection (1 tap if the headset doesn’t automatically reconnect) • Cancel missed call LED (1 tap) • Reject a call (2-second press) • Transfer call to/from phone (during call, 2-second press) • Enable/disable Online Indicator (while powered on, 2-second press Call and Volume Up buttons) MICRO USB CHARGING PORT • Use with the AC wall charger: 1 hour before first use 3 hours (100% charge) • Do not use headphones while charging PLT_ BB903+ + - LED Area covered by band Project: GSG, ACCORDION, PSD, BB903, EN Date: 06/15/10 Component: Accordion User Guide File Name: 83988-21_BackBeat903+_061510 Art Master Number: 83988-21 Part Number: 83987-21 Scale: 1:1 Resolution: 300dpi Links: N/A Fonts: Gesta Light, Regular, Medium, Bold Software: CS3 Printing Method: Offset Lithography Inks: Process Black PMS 294 PMS 151 Finishes: OVERALL MATTE VARNISH Notes: FINAL Designer: Malika Henderson Company: Oak Hill Corporation E-mail: [email protected] Phone: 1.415.847.6083 Project Specifications

en For Your Safety fr Pour Votre Sûreté es Para Su Seguridad pt Para Sua Segurança 2 en 3 Important Safety and Operational Information Please read the following safety and operational instructions before using your headset/headphones and accessories. Please keep these instructions for your reference. Additional warnings may be present on the product, packaging, or in the user instructions. This symbol identifies and alerts the user to the presence of important safety warnings. General Operating, storage and charging temperature is 0°C to 40°C (32°F to 104°F). Warnings • Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset /headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before putting your headset or headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset or headphones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets or headphones at high volume levels. 4. Turn the volume down if the sound from the headset/ headphones prevent you from hearing people speaking near you. See www.plantronics.com/healthandsafety for more information on headsets/headphones and hearing. • Use of a headset/headphones that cover both ears will impair your ability to hear other sounds. Use of such headset/ headphones while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most regions. • Check local laws regarding use of a mobile phone and headset/ headphones while driving. If you use the headset/headphones while driving ensure your attention and focus remain on driving safely. • Observe all signs and instructions that require an electrical device 4 en 5 or RF radio product to be switched off in designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive atmospheres, or aircraft. • This product is not a toy. Never allow children to play with the product — small parts may be a choking hazard. • Install and use eartips and earbuds in accordance with the instructions provided. Do not force eartips or earbuds down the ear canal. If either becomes lodged in the ear canal, seek medical attention immediately. • Ensure eartips and earbuds are kept clean and free of ear wax buildup to maintain the specified product performance. • If you experience a skin irritation after using this product, discontinue use and contact Plantronics. • Applying excessive pressure to the headset/headphones may injure the outer ear. Do not wear the headset /headphones while sleeping or in other situations where pressure may be exerted against the headset/headphones. • Do not disassemble or insert anything into the product or charger because this may cause damage to the internal components or cause injury to you. • If the product or charger: overheats; has a damaged cord or plug; has been dropped or damaged; has been dropped into water, disconnect any charger from its power supply, discontinue use of the product and contact Plantronics. • Prevent rain, moisture or other liquid from coming into contact with the product to protect against damage to your headset / headphone or injury to you. This warning is not applicable for ruggedized or sports products which are designed to withstand contact with moisture. To avoid the risk of electric shock, explosion, fire or leakage of corrosive or toxic chemicals, observe the following charging and battery warnings: Charging Warnings • Use only the charger supplied by Plantronics to charge the product. Do not use the chargers for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. • If your headset / headphone is designed to be charged with your mobile phone charger using a custom adapter, use only mobile phone chargers approved and provided by your mobile phone manufacturer. • Charge the headset / headphones according to the instructions supplied with the unit. • Plug the AC adapter or charger into an outlet that is near the equipment and will be easily accessible. • Never charge the battery where the temperature may fall below 0°C (32°F) or rise above 40°C (104°F) — for example, in an unattended motor vehicle. • Avoid charging the battery while it is unattended. 6 en 7 Battery Warnings To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings: • Do not dispose of the product or battery in a fire or heat above 100ºC. • Do not open, deform or mutilate the battery as there may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. • Do not attempt to open the headset/headphones or remove the battery. Recycling: Your product and batteries must be recycled or disposed of properly. Contact your local recycling center for information on proper disposal. Regulatory Notices FCC Requirements Part 15 Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for …

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA 95060 USA City: Santa Cruz Country: CA 95060 USA Declare that: Name Representative of agent: ............. (1) Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Rd., Wuku Industrial Zone City: Taipei County Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Bluetooth Headphones Type designation: BackBeat 903+ Trademark: PLANTRONICS on our behalf. Date: Jul.16, 2010 City: Santa Cruz Name: Mr. Peter Clark (2) Function: Compliance Engineering Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group EXTERNAL PHOTOGRPHS OF EUT FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road…

Text truncated - open the document above for the full version.

83413-0026 Torino Refresh Quanyu ChangJul.13, 2010

FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group INTERNAL PHOTOGRPHS OF EUT FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Battery – 1 (ATL) FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Battery – 2 (LISHEN) FCC ID: AL8-BB903P IC: 457A-BB903P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei Co…

Text truncated - open the document above for the full version.

Torino refresh Bill Of Materials_20100615 Item Part number Part Name Specification Usage Reference 54000000081C CC CC / 4.7uF / 6.3V / X5R / 0603 2.0 C21,C35 540000001405 CC CC / 1uF / 6.3V / X5R / 0402 6.0 C14,C17,C37,C18, C24, C19 54000000089C CC CC / 10UF/ 6.3V / X5R / 0603/ TDK H 1.0 C20 54101100650N CC CC / 10pF / 50V / +-5% / 0402 5.0 C1,C2,C3,C4,C40 54000000027C CC CC / 100nF / 10V / X5R / 0402 4.0 C28,C30,C34, C100 54109150640N CC CC / 15pF / 25V / NPO / 0201 2.0 C22,C39 542014737208 CC CC / 47nF /10V / X7R / 0402 1.0 C10 54101120650C CC CC / 12pF / 50V / C0G / 0402 1.0 C44 54201223730C CC CC / 22nF / 16V / X7R / 0402 1.0 C43 542011037408 CC CC / 10nF / 25V / X7R / 0402 12.0 C6,C8,C12,C15,C25,C29,C31,C33,C36 , C45 , C55 , C53 54000000051C CC CC / 2u2F / 6.3V / X5R / 0603 3.0 C23,C38,C48 (621000044300) 621000079500 CL CL / 22uH / GLFR2012T220M-LR 1.0 L3 621000053000 ( 621000078400 ) CL CL / 22uH / 0603/ GLF1608 1.0 L4 621000069600 CL CL / 18nH / 10% / 0402 1.0 L5 5020473014AB CR CR / 47K / 0402 / 5% 1.0 R43 502330A013A4 CR CR / 33R / 0402 / 1% 2.0 R26,R27 502022A084A4 CR CR / 2R2 / 0201 / 5% 1.0 R23 502022A014AB CR CR / 2R2 / 0402 / 5% 1.0 R30 5021503083A4 CR CR / 150K / 0201 / 1% 1.0 R29 5021503013A4 CR CR / 150K / 0402 / 1% 2.0 R100, R29 5020474014AB CR CR / 470K / 0402 / 5% 2.0 R37, R36 5020103014AB CR CR / 10K / 0402 / 5% 3.0 R104, R54, R53 5021002083A4 CR CR / 10K / 0201 / 5% 2.0 R40, R101 5021001013AB CR CR / 1K / 0402 /1% 1.0 R44 5020104014AB CR CR / 100K / 0402 / 5% 2.0 R28, R22 5020122014A4 CR CR / 1K2 / 0402 / 5% 1.0 R45 502022201440 CR CR / 2K2 / 0402 / 5% 2.0 R102,R103 5020000084A4 CR CR / 0R / 0201 / 5% 4.0 R2,R3,R6,R7 EE Parts / Main board 5020000014A4 CR CR / 0R / 0402 / 5% 3.0 R105,R8,C11 5021803013A4 CR CR / 180K / 0402 / 1% 2.0 R19, R21 690300194200 Micro USB connector_B type MRUSB-5B-D-S1291 1.0 J20 575004610204 Dual LED RB colors (right angle) LTST-S326TBJRKT-5A 1.0 D4 Balun Filter RBBPB2012050A9T 1.0 U6 572002141232 Dual Diode CDBV3-54 C 1.0 D16 581000330401 NPN Transistor MMBT3904LT 1.0 Q1 690300210500 Wire to board connector (socket) CI1106M1HR0-LF 1.0 J11 690300174000 FPC to board connector ( 用 F0504WR-S-08P) E&T_6707-F08N-02R 8-pin 1.0 J13 670200009500 Side Push Type Switch SOH-213HST 3.0 SW7, SW3, SW2 581002172006 NPN Transistor 2SC5658 2.0 Q3, Q4 610300038035 BT Chip MIC BC57E687C-GITB-E4 1.0 U1 610600051173(610600042418) 3V3 LDO 用 EMP8734-33VF05GRR 代替 (MM3293DNRE/SOT23) 1.0 U4 610100032429 16Mega Flash Memory 3.0V SST39VF1601-70-4C-B3K 1.0 U5 690900041300 26Mhz Crystal XTL571100-A182-032 (3225) 1.0 Y1 CL (RF 專用 ) 1.0nH/0402 Cyntec 1.0 L6 CC (RF 專用 ) CAP 1.8PF 50V +-.25PF 0402 1.0 C42

Report No.: EF/2010/40004~5 FCC ID: AL8-BB903P Issue Date: Jul. 06, 2010 IC: 457A-BB903P Page: 1 of 86 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT AND INDUSTRY CANADA RSS-210 OF Product Name: Bluetooth Headphones Brand Name: PLANTRONICS Model Name: BackBeat 903+ Model Difference: N/A IC: FCC ID: 457A-BB903P AL8-BB903P Report No.: EF/2010/40004~5 Issue Date: Jul. 06, 2010 Rule Part: §15.247, Cat: DSS RSS-210 issue 7:2007, Annex 8 Prepared for: Plantronics, Inc. 345 Encinal Street, Santa Cruz, CA95060 USA Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No.: EF/2010/40004~5 FCC ID: AL8-BB903P Issue Date: Jul. 06, 2010 IC: 457A-BB903P Page: 2 of 86 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnifica- tion and jurisdiction issues defined therein. Any holder of this document is advised t…

Text truncated - open the document above for the full version.