AL8-PWPTF620PWireless Charge Stand

Declaration of Conformity Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-PWPTF620P Please be notified that we, the undersigned, HP lnc. declares that the product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, _________________ Name: Ismael Talancon Lara Title: Manager Email: [email protected] Date:2026-01-14

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-21-2026 FCC ID: AL8-PWPTF620P Ref: Attestation Statements Part 2.911(d)(5)(i) Filing HP Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. HP Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing HP Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, _________________ Name: Ismael Talancon Lara Title: Manager Email: [email protected]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-21-2026 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: AL8 Applicant FRN: 0027240845 HP Inc. (“the applicant”) certifies that, as of the date of the filing of the application, HP Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. HP Inc. (“the applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. HP Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: HP Inc. U.S. Agent FRN: 0027240845 Address: 1501 Page Mill Road, Palo Alto, CA 94304 USA Contact Person: Ismael Talancon Lara Tel.: +52 664 647 4968 Email: [email protected] Sincerely, HP Inc. HP Inc. Ismael Talancon Lara Ismael Talancon Lara

Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-PWPTF620P Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: 1. Block Diagram 2. Schematics 3. Operational Description Pursuant to sections 0.457 and 0.459 of CFR 47 Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________ Name: Ismael Talancon Lara Title: Manager Email: [email protected] Date:2026-01-14

Declaration of Authorization We Name: HP lnc. Address: 1501 Page Mill Road, Palo Alto, CA 94304 USA Declare that: Name Representative of agent: Marlin Chen Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone City: Suzhou Country: China is authorized to apply for Certification of the following product(s): Product: Wireless Charge Stand FCC ID: AL8-PWPTF620P Model No.: PWPTF620P Brand Name: HP Sincerely, ________________ Name: Ismael Talancon Lara Title Manager Email: [email protected] Date:2026-01-14

HP Inc. 3390 E Harmony Rd Fort Collins, CO 80528 USA Authorization on Behalf of HP Inc. for the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1.I , Richard P. Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (“HP”) and Applicant/Grantee Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2.T his Authorization will designate the person named below to act on my behalf and HP’s behalf as an authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests fo r c onfidentiality, shall have the same effect as mine . N ame: Ismael Talancon Lara Title: Manager, Hybrid System & Peripheral Compliance Address: Poly Com S. de R.L. de C.V. Boulevard Bellas Artes No. 20308, Colonia Ciudad Industrial Tijuana, BC Mexico 22444 Telephone: +52 664 647-4968 E-mail: [email protected] 3.Q uestions about the scope and effect of this Authorization should be addressed as follows: Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer Worldwide Technical Regulations HP Inc. (A ) 3390 E ast Harmony Road, MS 66 Fort Collins, CO 80528 (T ) + 1 970 898 8713 (E ) ri [email protected] 4.I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Fort Collins, Colorado on the date indicated below my signature. R ichard P. Tarsio US/Canada Technical Regulations & Standards Engineer HP Inc. Date: 8 January 2024

Justification Statement Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-PWPTF620P Please be advised that HP Inc., the undersigned, confirms that all wireless power transfer (WPT) measurements were conducted using radiated methods; therefore, separate antenna gain documentation is not required. Sincerely, _________________ Name: Ismael Talancon Lara Title: Manager Email: [email protected] Date:2026-01-31

1:1 scale XXXXXX-XX | Rev.06 | Compliance Marks, Premium Charge Stand, Print, Falcon | Chase Bailey | 9.10.25 CCXXxxYYyyyZzW R-NZ XXXXX A/V I.C.T.E. R-R-hpi-PWPTF620 XXXXX-YY-MMMMM 201-220865 TA-2026/XXXX APPROVED R3A304 RoHS CIDF15000435 HP Inc. S/N: XXXXXXXXXX FH MY C - X X X X X I C : 4 5 7 A - P W P T F 6 2 0 P I F T A B C D E F 2 3 - 1 2 3 4 5 6 X X X X / D J I D / 2 0 2 6 / 2 1 4 1 C A N I C E S - 3 ( B ) / N M B - 3 ( B ) C A N R S S - 2 1 6 / C N R - 2 1 6 NR:XXXX-XX-X-XXXX FCC ID: AL8-PWPTF620P Black Label (Match to VDI 21) With Black Gloss Printing RMN(Model// 모델명):PWPTF620P M a d e i n V ie tn a m Input// : 12V 2.5A

Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Appendix D. System Verification The measuring results for system check are shown as below. Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249

RF Exposure Report Report Format Version 1.0.0 Page No. : 1 of 30 Report No. : SFBHTF-WTW-P25120249 Issued Date : 2026/1/29 RF Exposure Report FCC Rule Part : CFR §2.1091 Standards : 47 CFR FCC Part 1.1310, KDB 680106 D01_v04 Report No. : SFBHTF-WTW-P25120249 Applicant : HP Inc. Address : 1501 Page Mill Road, Palo Alto, CA 94304 USA Product : Wireless Charge Stand FCC ID : AL8-PWPTF620P Brand : HP Model No. : PWPTF620P Sample Received Date : 2025/12/9 Date of Testing : 2026/1/7 ~ 2026/1/9 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. RF Exposure Report Report Format Version 1.0.0 Page No. : 2 of 30 Report No. : SFBHTF-WTW-P25120249 Issued Date : 2026/1/29 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Description of Equipment Under Test ................................................................................................................................. 4 2. Description of Test Modes .................................................................................................................................................... 4 3. Preface .................................................................................................................................................................................... 4 4. SAR Measurement System ................................................................................................................................................... 5 4.1 DASY8 Module WPT - MAGPy System ....................................................................................................................... 5 4.1.1 Robot ............................................................................................................................................................... 6 4.1.2 Probes ............................................................................................................................................................. 7 4.1.3 Data Acquisition Electronics (DAE) .................................................................................................................. 7 5. Compliance Evaluation ......................................................................................................................................................... 8 6. Simulation Results ................................................................................................................................................................ 9 7. System Check and Validation Sources .............................................................................................................................. 10 7.1 Device ........................................................................................................................................................................ 11 8. Human Exposure Limits ...................................................................................................................................................... 12 8.1 Limits for Maximum Permissible Exposure ................................................................................................................ 12 9. Specific Absorption Rate Limits ......................................................................................................................................... 13 10. SAR and Induced …

Text truncated - open the document above for the full version.

Appendix A. Measured Test Result Test Result are shown below. Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249

Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249

Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249 Report No.: SFBHTF-WTW-P25120249

1 / 5 承认书 SPECIFICTIONFORAPPROVAL 客户： CUSTOMER: 客户料号： CUSTP/N: 产品型号：J-FDIMPP DESC: 日期：20230601 DATE: 版本： VERSION:A.0 拟制 PREPAREDBY 审核 CHECKEDBY 批准 APPROVEDBY 客户承认 CUSTOMERAPPROVE 杨茂新刘惜姜罗杰 NuVolta Technologies (Hefei) Co., Ltd. 3 / 5 SPECIFICATION 产品型号 DESC J-FDMPP 版本 REV:A.O 客户 CUST 客户料号 CUSTP/N 一、尺寸DIMENSION(MM) ABCDEFG 20.5±0.539±119.5±0.342.5±0.58±14±1.52.05±0.1 注： 5 / 5 三、绕线参数WindingSpecification: 线材 Wire 圈数 Turns 绕线方向 WindingDirection 热风绞线0.08*80 10TS 反绕 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 项目 TIEM 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS IND 8.4uH±5% 100KHZ/1.0VLCRMETRTH2830N DCR 50mΩMax PH2511S Q 100±10% 100KHZ/1.0VLCRMETRTH2830N 拟制PREPAREDBY审核CHECKEDBY日期DATE 杨茂新刘惜姜 20230601

MRT Technology (Taiwan) Co., Ltd Report No.: 2511TW0116-U3 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2026-01-29 Web: www.mrt-cert.com Page Number: 1 of 79 FCC ID : AL8-PWPTF620P APPLICANT : HP Inc. Application Type : Certification Product : Wireless Charge Stand Model No. : PWPTF620P Brand Name : HP FCC Classification : DCD-Part 15 Low Power Transmitter Below 1705 kHz FCC Rule Part(s) : Part 15.209 Test Procedure(s) : ANSI C63.10-2020+Cor 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Received Date : November 27, 2025 Test Date : December 19, 2025~ January 28, 2026 MEASUREMENT REPORT Tested By : ( Kaunaz Lee ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2020. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2511TW0116-U3 Page Number: 2 of 79 Revision History Report No. Version Description Issue Date Note 2511TW0116-U3 1.0 Original Report 2026-01-29 Report No.: 2511TW0116-U3 Page Number: 3 of 79 CONTENTS Description Page 1. INTRODUCTION ......................................................................................................................6 1.1. Scope ............................................................................................................................ 6 1.2. MRT Test Location ......................................................................................................... 6 2. PRODUCT INFORMATION ......................................................................................................7 2.1. Equipment Description .................................................................................................. 7 2.2. Test Mode ...................................................................................................................... 8 2.3. Test Software ................................................................................................................. 9 2.4. Test Configuration.......................................................................................................... 9 2.5. Test System Details ..................................................................................................... 15 2.6. EMI Suppression Device(s)/Modifications .................................................................... 16 2.7. Labeling Requirements ................................................................................................ 16 3. DESCRIPTION of TEST ......................................................................................................... 17 3.1. Evaluation Procedure .................................................................................................. 17 3.2. AC Line Conducted Emissions .................................................................................... 17 3.3. Radiated Emissions ..................................................................................................... 18 4. ANTENNA REQUIREMENTS ................................................................................................. 19 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................. 20 6. MEASUREMENT UNCERTAINTY.......................................................................................... 21 7. TEST RESULT ....................................................................................................................... 22 7.1. Summary ..................................................................................................................... 22 7.2. Radiated Spurious Emissions and Field Strength of Fundamental Emissions Measurement .............................................................................................................................. 23 7.2.1. Test Limit ................................................................................................................. 23 7.2.2. Test Procedure Used ............................................................................................... 23 7.2.3. Test Setup ............................................................................................................... 25 7.2.4. Test Result ............................................................................................................... 26 7.3. 20dB Bandwidth Measurement .................................................................................... 62 7.3.1. Test Limit ................................................................................................................. 62 7.3.2. Test Procedure Used ............................................................................................... 62 7.3.3. Test Setting .............................................................................................................. 62 7.3.4. Test Setup ............................................................................................................... 62 7.3.5. Test Result ............................................................................................................... 63 7.4. AC Conducted Emissions Measurement ..................................................................... 65 Report No.: 2511TW0116-U3 Page Number: 4 of 79 7.4.1. Test Limit ................................................................................................................. 65 7.4.2. Test Setup ............................................................................................................... 65 7.4.3. Test Result ..............................................…

Text truncated - open the document above for the full version.