AL8-CBVS1Wireless Charge Stand

Regulatory Compliance Information United States/Puerto Rico A/V ICTE 81242 Declaration of Conformity/FCC Regulatory Information We Plantronics Inc, 345 Encinal Street Santa Cruz, California, 95060 USA (800) 544-4660 declare under our sole responsibility that the products VS85T, CBVS1, BT700C comply with Part 15 of the FCC Rules. Operation is subject the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Taiwan 根據NCC低功率管理辦法規定：取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用 者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影 響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使 用。 前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信 或工業、科學及醫療用電波輻射性電機設備之干擾。 R3A304 RoHS 有關RoHS資訊，請前 往www.poly.com/rohs Thailand “เครื่องโทรคมนาคมและอุปกรณนี้มีความสอ ดคลองตามมาตรฐานทางเทคนิคเลขที่.........” “เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอ ดคลองตามขอกําหนดของ กทช.” or Russia MFi Made for iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE (2nd generation), iPad Pro 12.9-inch (5th generation), iPad Pro 11-inch (3rd generation), iPad Pro 12.9-inch (1st generation), iPad Pro 9.7-inch, iPad Air (4th generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad mini 2, iPad (6th generation), iPad (5th generation). FreeRTOS software Permission is hereby granted, free of charge, to any person obtaining a copy of this FreeRTOS software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. BC For CBVS1 Wireless Charge Stand only Note: This equipment has been tested and found to comply with the limits for consumer ISM equipment, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha t interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televis ion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by on e or more of the following measures: — Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. THE SOFTWARE IS PROVIDE D “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN A N ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit poly.com for more information. In order to comply with FCC and ISED RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment. Canada CAN ICES-003 (B)/NMB-003(B) CAN RSS-216 / CNR-216 ISED Canada Regulatory Information This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’ISED applicables aux appar…

Text truncated - open the document above for the full version.

Poly Voyager Surround 85 UC Bluetooth headset with Poly Wireless Charge Stand User Guide DRAFT – CONFIDENTIAL DO NOT SHARE Contents Overview3 Headset3 USB Bluetooth adapter4 Connect and pair5 Pair to mobile device5 Connect to PC5 Configure USB adapter for streaming media6 Pair BT700 USB adapter again6 Fit and charge7 Fit7 Charge7 Check headset battery status8 Load software9 Update your Poly device9 The basics10 Touch control on right earcup10 Power on/off10 Adjust volume10 Play or pause audio10 Track forward11 Track backward11 ANC and Transparency Mode11 ANC and Transparency Mode settings12 Voice assistant (smartphone feature)12 Use sensors12 Make/Take/End Calls14 Make a call14 Answer or end a call14 Hold call14 Switch between calls (flash)14 Mute 14 Answer a second call14 Redial last outgoing call (smartphone feature)14 Launch Microsoft Teams (Teams model only)14 More Features16 Customize your headset16 Corded mode (audio over USB)16 What's in the box17 Support19 Overview Headset ANC / Transparency Your headset has touch control on the right earcup. Use swipe and tap gestures for call and media control. IconDescription Volume control •Swipe up/down to adjust volume Call control •Tap to answer/end call Interact with Microsoft Teams (Teams model only, Teams app required) •Tap to interact when not on a call Audio control* •Tap to play/pause •Swipe to track forward/backward ANC (Active Noise Canceling) and Transparency Mode LEDs/Online indicator Mute/unmute Power Bluetooth ® pairing Charge port Note: *Functionality varies by application. May not function with web-based apps. DRAFT – CONFIDENTIAL DO NOT SHARE 3 Be safe Please read the safety guide for important safety and regulatory information before using your new device. USB Bluetooth adapter Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to high-fidelity computer audio. Note: Adapter's USB connection and design may vary, but function is the same. Standard LEDs USB LEDsWhat they mean Flashing red and bluePairing Solid blueDevice connected Flashing blueOn a call Solid redMute active Flashing purpleStreaming media from computer LEDs when Microsoft Teams* is detected USB LEDsWhat they mean Flashing red and bluePairing Solid purpleMicrosoft Teams connected Flashing blueOn a call Solid redMute active Pulsing purpleMicrosoft Teams notification Note: *Requires Microsoft Teams desktop application. DRAFT – CONFIDENTIAL DO NOT SHARE 4 Connect and pair Pair to mobile device 1 To put your headset in pair mode, slide and hold the Power switch away from the off position until you hear "pairing" and the headset LEDs flash blue and white. :02 “Pairing” Blutooth Headphones Computer Camera 2Activate Bluetooth on your phone and set it to search for new devices. •iPhone Settings > Bluetooth > On* •Android Settings > Bluetooth On > Scan for devices* Note: *Menus may vary by device. 3Select “Poly VSurround 85.” Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing. Note: Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth adapter. Connect to PC Your Bluetooth USB adapter provides the best connection, softphone functionality and acoustic sound quality through your headset. The adapter comes pre-paired to your headset. 1Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. 2The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid. 3Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your headset behavior through advanced settings and options. DRAFT – CONFIDENTIAL DO NOT SHARE 5 Configure USB adapter for streaming media Your high-fidelity Bluetooth USB adapter comes ready to take calls. To stream media, configure your Bluetooth USB adapter. Windows 1To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as the Default Device and click OK. 2To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter. Mac 1To configure your Bluetooth USB adapter for streaming media on your Mac, go to System Preferences > Sound. On both the Input and Output tabs, select Poly BT700. Pair BT700 USB adapter again Typically, your USB Bluetooth adapter is pre-paired to your Poly audio device. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your Poly device. Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device. Download: poly.com/lens. Note: Adapter design varies by USB connection. 1Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2Put your Poly audio device in pair mode. 3Launch Poly Lens Desktop App and navigate to Poly BT700. 4Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the adapter's main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid. DRAFT – CONFIDENTIAL DO NOT SHARE 6 Fit and charge Fit Important: Headset microphones are on the front of your earcups. For best call audio, ensure your headset is worn correctly. R L Charge Charge your headset using the the Poly Wireless Charge Stand. Your headset has up to 24 hours of listening time. 1Place the headset on the charge stand. Lock Indicator Light Music ANC Timer Headphones Phone Mobile Computer Camera Note: The charge stand plugs into a computer or wall charger’s USB-C port.…

Text truncated - open the document above for the full version.

Date: 7/14/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code:AL8 Applicant (Grantee) FRN: 0027240845 To whom it may concern: HP Inc. (“the applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced Grantee Code. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Ismael Talancon HP Inc. FCC FRN: 0027240845 1501 Page Mill Road, Palo Alto, CA 94304 USA [email protected] Sincerely yours, Ismael Talancon HP Inc. 1501 Page Mill Road, Palo Alto, CA 94304 USA

Date: 6/30/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: AL8-CBVS1 1. HP Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. HP Inc.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, Name: Ismael Talancon Job Title: Manager, Technical Compliance Company Name: HP Inc.

Date: 5/24/2023 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern: I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until 24/05/2024. Sincerely Yours, Ismael Talancon Manager Technical Compliance HP Inc.

Date: 5/24/2023 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: AL8-CBVS1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation • Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 30/11/2023 • External Photos • Internal Photos • Test Setup Photos • User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Ismael Talancon Manager, Technical Compliance HP Inc.

CHARGE STAND REGULATORY MARKINGS2905/23/2023Dora Wang 2022 X X X X X X X X X X X X X X I C : 4 5 7 A- C B V S 1 5 V D C 1 A ( i n p u t ) / 5 V 5 0 0 m A ( o u t p u t ) R-NZ H P I n c . M o d e l : C B V S 1 M a d e I n M e x i c o A n a t e l : X X X X X - X X - X X X X X F C C I D : A L 8 - C B V S 1 221038-01 R3A304 RoHS C-XXXXX INK COLOR: PMS COOL GRAY 10C X Y (75mm) R-C-hpi-CBVS1 X X X X X X X X X X X X X X I C : 4 5 7 A- C B V S 1 5 V D C 1 A ( i n p u t ) / 5 V 5 0 0 m A ( o u t p u t ) R-NZ H P I n c . M o d e l : C B V S 1 M a d e I n M e x i c o A n a t e l : X X X X X - X X - X X X X X F C C I D : A L 8 - C B V S 1 R3A304 RoHS C-XXXXX X Y R-C-hpi-CBVS1 IFT:XXXXXXXXXXX IFT:XXXXXXXXXXX

FCC Part 1 Subpart I FCC Part 2 Subpart J TEST REPORT FOR HEADPHONE CHARGER MODEL: CBVS1 FCC ID: AL8-CBVS1 REPORT NUMBER: R14653036-S1 ISSUE DATE: 2023-09-11 Prepared for HP INC. 1501 PAGE MILL ROAD, PALO ALTO, CA 94304 USA Prepared by UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709 USA TEL: (919) 549-1400 REPORT NO: R14653036-S1 DATE: 2023-09-11 EUT: CHARGER MODEL: CBVS1 Page 2 of 15 UL LLC FORM NO: CCSUP4701I 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2023-09-11 Initial Issue Brian Kiewra REPORT NO: R14653036-S1 DATE: 2023-09-11 EUT: CHARGER MODEL: CBVS1 Page 3 of 15 UL LLC FORM NO: CCSUP4701I 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS REVISION HISTORY ................................................................................................................. 2 TABLE OF CONTENTS ............................................................................................................ 3 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................. 6 4.1. METROLOGICAL TRACEABILITY .............................................................................. 6 4.2. DECISION RULES ....................................................................................................... 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT .............................................................................................. 7 5.2. DESCRIPTION OF TEST SETUP ................................................................................ 7 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 9 7. DUTY CYCLE ....................................................................................................................10 8. MAXIMUM PERMISSIBLE RF EXPOSURE TEST RESULTS ...........................................11 8.1. FCC LIMITS ................................................................................................................11 8.2. DETAILED TEST RESULTS .......................................................................................13 9. SETUP PHOTO .................................................................................................................14 9.1. CONFIGURATION 1 ...................................................................................................14 END OF REPORT ....................................................................................................................15 REPORT NO: R14653036-S1 DATE: 2023-09-11 EUT: CHARGER MODEL: CBVS1 Page 4 of 15 UL LLC FORM NO: CCSUP4701I 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC 1. ATTESTATION OF TEST RESULTS COMPANY NAME: HP, Inc. 1501 Page Mill Road, Palo Alto, CA 94304 USA EUT DESCRIPTION: Headphone Charger MODEL NUMBER: CBVS1 SERIAL NUMBER: Charger: 00005A Loads: 2THH0D (50-100%), 2TERJ0(0%) SAMPLE RECEIPT DATE: 2023-07-14 DATE TESTED: 2023-08-24 to 2023-08-25 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Compliant UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. Approved & Released For UL LLC By: Prepared By: Francisco deAnda Brian Kiewra Staff Engineer Project Engineer Consumer, Medical and IT Segment Consumer, Medical and IT Segment UL Verification Services UL LLC REPORT NO: R14653036-S1 DATE: 2023-09-11 EUT: CHARGER MODEL: CBVS1 Page 5 of 15 UL LLC FORM NO: CCSUP4701I 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC 2. TEST METHODOLOGY All testing / calculations were made in accordance with FCC KDB 447498 D01, KDB 447498 D03, KDB 680106 D01 v03 and FCC OET Bulletin 65 Edition 97-01. 3. FACILITIES AND ACCREDITATION UL LLC is accredited by A2LA, Certificate Number 0751.06, for all testing performed within the scope of this report. Testing was performed at the locations noted below. Address ISED CABID ISED Company Number FCC Registration ☐ Building 12 Laboratory Dr RTP, NC 27709, U.S.A US0067 2180C 825374 ☒ Building 2800 Suite Perimeter Park Dr. Suite B Morrisville, NC 27560, U.S.…

Text truncated - open the document above for the full version.

TEST REPORT Report Number. : NBK14653036A.V1 Applicant : HP Inc. 1501 Page Mill Road Palo Alto, CA 94304, US Model : CBVS1 FCC ID : AL8-CBVS1 IC : 457A-CBVS1 EUT Description : Wireless Charge Stand Test Standard(s) : FCC 47 CFR PART 15 SUBPART C ISED RSS-210 Date Of Issue: 2023-09-11 Prepared by: UL LLC 333 Pfingsten Road Northbrook, IL 60062, US REPORT NO: NBK14653036A.V1 DATE: 2023-09-11 FCC ID: AL8-CBVS1 IC: 457A-CBVS1 Page 2 of 59 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Road, Northbrook, IL 60062; USA This report shall not be reproduced except in full, without the written approval of UL LLC Revision History Rev. Issue Date Revisions Revised By V1 2023-09-11 Original bm REPORT NO: NBK14653036A.V1 DATE: 2023-09-11 FCC ID: AL8-CBVS1 IC: 457A-CBVS1 Page 3 of 59 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Road, Northbrook, IL 60062; USA This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................. 7 METROLOGICAL TRACEABILITY .............................................................................. 7 DECISION RULES ....................................................................................................... 7 MEASUREMENT UNCERTAINTY ............................................................................... 7 SAMPLE CALCULATION ............................................................................................ 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 DESCRIPTION OF EUT .............................................................................................. 8 MAXIMUM RADIATED FIELD STRENGHT ................................................................. 8 SOFTWARE AND FIRMWARE .................................................................................... 8 WORST-CASE CONFIGURATION AND MODE .......................................................... 8 DESCRIPTION OF TEST SETUP ................................................................................ 9 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................11 7. OCCUPIED BANDWIDTH .................................................................................................12 Bandwidth with load ....................................................................................................13 Bandwidth without load ...............................................................................................14 8. RADIATED EMISSION TEST RESULTS...........................................................................15 LIMITS AND PROCEDURE ........................................................................................15 FUNDAMENTAL AND SPURIOUS EMISSIONS (0.009 - 30 MHz), EUT WITH AC/DC ADAPTER .............................................................................................................................17 Fundamental Closeup with load ...........................................................................17 9kHz – 150kHz with load .....................................................................................19 150kHz – 30MHz with load ..................................................................................21 Fundamental closeup without load .......................................................................23 9kHz – 150kHz without load .................................................................................25 150kHz – 30MHz without load .............................................................................27 TX SPURIOUS EMISSION 30 TO 1000 MHz .............................................................29 30MHz-1GHz with load ........................................................................................29 30MHz-1GHz without load ...................................................................................31 9. FREQUENCY STABILITY .................................................................................................33 Frequency Stability Results .........................................................................................34 Tabular Data ............................…

Text truncated - open the document above for the full version.