AL8-VF2RWireless Bluetooth Earphones

Regulatory Compliance Information United States/Puerto Rico FCC Regulatory Information xxxxxxx 81242 3115593 5018866 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the r eceiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity We HP Inc., 1501 Page Mill Road, Palo Alto CA 94304 U.S. A. 650-857-1501 declare under our sole responsibility that the products PBVF20 (PBVF2R, PBVF2L) PCCVF20 comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: AL8-VF2R FCC ID: AL8-VF2L MFi iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone SE (2nd generation), iPad Pro 12.9-inch (6th generation), iPad Pro 12.9-inch (5th generation), iPad Pro 11-inch (4th generation), iPad Pro 11-inch (3rd generation), iPad mini (6th generation), iPad mini (5th generation), iPad (10th generation), iPad (9th generation), iPad Air (5th generation), iPad Air (4th generation). FreeRTOS software Permission is hereby granted, free of charge, to any person obtaining a copy of this FreeRTOS software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. A/V ICTE BC accepter tout brouillage radioélectrique subi, même si le br ouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition de ra diation ISDE énoncés pour un environnement non contrôlé. CAN RSS-216 / CNR-216 CAN ICES-003 (B)/ NMB-003(B) China 型 号核准代码显示在产品标签和产品本体上 无线充电设备 (不带电源适配器销售) ( 一） 产品名称: 无线充电座 型号: PCCVF20（二） 无线充电机理：感应耦合 额定传输功率：xx 瓦最大 工作频率（范围）：xx.xxMHz )（三）设备符合国家《无线充电（电力传输）设备无线电管理暂行规定》 以及产品质量、电磁辐射和电气安全等法律法规、国家标准等有关规定；（四）不得擅自改变使用场 景或使用条件、扩大工作频率范围、加大传输功率（包括额外加装功率放大器）；（五）不得对其他合 法的无线电业务及台（站）产生有害干扰，也不得提出免受无线电干扰和辐射无线电波干扰的保护要 求，如对其他合法的无线电业务及台（站）产生有害干扰时，应立即停止使用，并在采取措施消除有害 干扰后方可继续使用；（六）无线充电设备禁用区域，禁止使用无线充电功能；（七）使用无线充电设 备如对广播业务的接收造成影响，应立即停止使用无线充电设备；（八）在船舶、航空器和铁路机车（ 含动车组列车）内使用无线充电设备应当遵守本规定及相关行业主管部门的规定. Europe [email protected] The following table provides information on the frequency bands used and the maximum RF transmit power of the product. EquipmentFrequency rangeMax. Transmit Power PBVF20(PBVF2R, PBVF2L)2400-2483.5MHz<X dBm (EIRP) Japan この装置は、クラスＢ機器です。この装置は、住宅環境で使用することを目的として いますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信 障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI-B Korea 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적 으로 하며, 모든 지역에서 사용할 수 있습니다. Mexico Requisitos del IFT Su uso está sujeto a las dos condiciones siguientes: 1. Este dispositivo no puede causar interferencias nocivas. 2. Este dispositivo debe aceptar todas las interferencias recibidas,incluidas aquellas que puedan causar un funcionamiento no deseado. Exposure to RF Radiation This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue. During testing, device radios are set to their highest transmission levels and placed in positions that simulate use near the head, with 0mm separation. Cases wit…

Text truncated - open the document above for the full version.

Voyager Free 20 True Wireless Earbuds with Charge Case DRAFT User Guide SUMMARY This guide provides the end-user with task-based user information for the featured product. Table of contents Your earbud system1 Earbud button controls2 Load software3 Update your Poly device3 Fit4 Replace eartips4 Charge5 Check battery level5 Quick charge6 Wireless charging (Qi charging)6 Power7 Power on/off your earbud system7 DeepSleep mode7 Connect and pair8 Pair to mobile device8 Pair mode8 The basics10 Adjust the volume 10 Adjust earbud microphone volume (softphone)10 Play or pause audio10 Track forward10 Track backward11 Voice assistant (smartphone feature)11 Use sensors11 ANC and Transparency Mode12 Make/Take/End Calls13 Make a call13 Answer or end a call13 Mute 13 Answer a second call14 Redial last outgoing call (smartphone feature)14 More Features15 ii Customize your earbud15 ANC and Transparency Mode settings15 Connect new earbud16 What's in the box17 iii Your earbud system Your earbud system easily connects to your mobile phone. The system includes: ●Wireless earbuds with wearing sensors ●Charge case with battery-status LEDs Your earbud system1 Earbud button controls Press an earbud button to control features on your earbud system. Control features using either earbud's button. Siri/Google Assistant :02 :04 x1 x2x1x3 :02 IconControlButton action Call answer/endClick once Pause/play media *Click once Track forwardClick 2 times Track backwardClick 3 times Mute/unmuteClick once Bluetooth pairingPress and hold for 4 seconds. For more, see Pair to mobile device on page 8. Siri/ Google Assistant Default phone assistant Press and hold for 2 seconds NOTE:*Functionality varies by application. May not function with web-based apps. 2 Chapter 2 Earbud button controls Load software Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control(answer/end and mute) functionality. ●Download Poly Lens Desktop App at poly.com/lens. ●Download Poly Lens Mobile App at poly.com/lens, the App Store or Google Play. Poly Lens Mobile App Poly Lens Desktop App Configure call control for softphones available for some softphones ✓ Change headset language✓✓ Enable features✓✓ Battery meter✓✓ Update device firmware✓✓ Manage notifications and alerts ✓✓ Schedule health and wellness reminders ✓✓ View user guide✓✓ FindMyHeadset✓ Update your Poly device Keep your firmware and software up-to-date to improve Poly device performance and add new features. Download the app at poly.com/lens. 1.Update earbuds 1.Go to Poly Lens Mobile App on your paired mobile device or to Poly Lens Desktop App on your connected computer. 2.Select your earbuds from the device list in Poly Lens App to view available updates. 3.Click the update button to wirelessly update earbud firmware or software. Load software 3 Fit Place earbud in your ear. Rotate down and forward for an optimal fit and sound experience. 1.Try the 4 eartips to find which size fits you comfortably while blocking external noise. 2.Listen to music and select the eartip that gives you the most bass response. 3.You may prefer a different size eartip in each ear. Replace eartips Change your eartips and lock them in place. 1.REMOVE: a.Fold down the eartip's outer cone to reveal the eartip base connection to the earbud. b.Pinch the eartip's outer cone and pull to remove. 2.REPLACE: a.Place the eartip base on the earbud microphone column and press into place for a secure fit. b.The eartip base clicks when locked into place. 4 Chapter 4 Fit Charge 1.To charge your earbuds, place them in the charge case. Your earbuds begin charging when placed in the case. 2.To recharge the case, plug it into a computer or USB charging device using the supplied USB cable. Alternatively, recharge using a third-party wireless charger (not included). TIP:For fastest charging, plug your charge case into a power outlet. 3.Your charge case LEDs blink every 10 seconds when charging and turn off when fully charged. Table 5-1 Charge time DeviceCharge time Charge case and earbudsApproximately 3 hours Earbuds onlyApproximately 2 hours Charge case onlyApproximately 2 hours Table 5-2Talk time DeviceTalk time Earbuds with ANC offUp to 5.5 hours Earbuds with ANC onUp to 5 hours Charge caseUp to 11 hours Check battery level Check your earbud system battery level. ■ Check your earbud system battery level: ●Listen to the battery level alert when you put on the earbuds. Charge 5 ●View charge case LEDs. The center LED indicates the charge case battery level. Left and right LEDs show earbud battery level when earbuds are in the case. NOTE:To activate LEDs, open your case lid, press the case button, or connect/remove the charge case from a power source. ●View earbud and charge case battery level in Poly Lens App . Download at poly.com/lens. Voice alertCharge case LEDsTalk time "Battery high"Green3 hours or more "Battery medium"Green1 to 3 hours "Battery low"Yellow10 minutes to1 hour "Battery critical"RedLess than 10 minutes Quick charge ■ Charge your earbuds for 15 minutes for up to a full hour of listening time. Wireless charging (Qi charging) Your charge case is compatible with third-party Qi wireless chargers. ■ To charge wirelessly, place the earbuds in the charge case and place your case on your compatible wireless charger. Refer to your wireless charger user guide. NOTE:Your earbuds charge only when placed in the charge case. They do not charge if placed directly on the wireless charger. 6 Chapter 5 Charge Power Power on/off your earbud system Your earbuds and case power on and off automatically. ■ Open your charge case to automatically power on the earbuds. Conversely, place your earbuds in the case and close the lid to automatically power your earbuds off and start charging them. DeepSleep mode If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 90 minutes. ■ To exit D…

Text truncated - open the document above for the full version.

en Safety Instructions To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Poly product. Operating, storage and charging temperature is 10 ̊C to 40 ̊C (50 ̊F to 104 ̊F). • Only use those Poly products and accessories designed for use with this product. • If you experience a skin irritation after using this product, discontinue use and contact Poly. • CHILDREN. Never allow children to play with the product-small parts may be a choking hazard. • Do not disassemble the product as this may expose you to dangerous voltages or other risks. Incorrect reas - sembly can cause electric shock or fire when the product is subsequently used. • Unplug, discontinue use and contact Poly if the product overheats or has a damaged outer casing, cord or plug. • Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset/headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before putting your headset/headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset/head - phones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets/headphones at high volume levels. 4. Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you. See poly.com/healthandsafety for more information on headsets/headphones and hearing. • If you use your headset/headphones while driving, check local laws regarding use of a mobile phone and headset, and ensure your attention and focus remain on driving safely. Use of a headset/headphones that covers both ears will impair your ability to hear other sounds and in most regions is illegal to use while oper - ating a motor vehicle or riding a bicycle and may be a serious hazard for you and others. • If this product includes earbuds/eartips, install and use them in accordance with the instructions provided. Do not force earbuds/eartips down the ear canal. Consult a doctor if they become lodged in the ear canal. • Plug the mains adapter or charger into a socket-outlet that is near to the equipment and will be easily accessible. Battery Warnings for Wireless Products • If your product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and/or damage the product. If your product has a replaceable battery, use only the battery type supplied by Poly. Remove a spent battery promptly. • Replace rechargeable batteries after three years or 300 charge cycles, whichever occurs first. • Do not dispose of the product or battery in a fire or heat above 40°C (104°F). • Do not expose the battery to extremely high temperatures. It may result in an explosion or the leakage of flammable liquid or gas. • Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. • Never put batteries in mouth. If swallowed, contact a physician or poison control center. • Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. • Always store batteries where children cannot reach them. • Do not allow any battery or its holder to contact metal objects such as keys or coins. • RECYCLING The product battery must be recycled or disposed of properly. Contact your local recycling center for battery removal and proper disposal. • Use only the charger supplied by Poly to charge the product and follow the charging instructions provided. Alternatively, if your headset is designed to be charged with your cell phone charger, use only cell phone char - gers approved and provided by your cell phone manufacturer. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. MFi Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. ar ر دي، ا أ  إردات ا وإردات وث  و 
ع إ وو
  ض ­ وا€‚ع ƒ„ ا…† ‡ ˆ‰ إردات ا Š‚„‹ Œدر 50 Ž ‘
 )‚“ Œدر 40 و‚“ ت Œدر 10 Ž ‘
 ‡ˆ وا‡‚” واارة ا Œاوح در — ˜™ . Poly ›œ ام Ÿ ا¡  ا £¢ا .(Š‚„‹ت Œدر 104 و • .›œ¥ §¦ا ا̈ ام Ÿ¢ ¥ © ¥¥ ا™ªˆ‰ و Poly ت«œ ى Ÿم £™ ƒ •. Poly ـ
™ وا̄ اŸ ا‡± ° ‹، ›œ¥ام §¦ا اŸ ا­
ي ‰Œب 
Š¡ذا أ •.قœ†ƒ
ة Ž ˜ ا̈…ª اμ¡£™  ق إذ ¢¶ · ƒ ا̧° ›œ¥
μ­‰
ل º¶ » ¢£¥¼ ™ ƒل. º¶ » ƒا • م£‚  œ °€‚ أو 
  
μ¡£¼ اˆا Ž ˜½ μ — ˜‰ ‡¥¾‚ى. † أ¶ ة أو …†ت ‹إ¿ ÀÁ­‚  Àذ ن » ƒ ›œ¥ا Àº
ê™ ƒ .­
¥‹ ›œ¥ا • ̄ اŸ ا‡± ° ™ و …ر ا ‡ °›œ¥ ا‹‹ ،ا ً ر Å  ً رة أو إذا ن ‚Ç¥‡ Ÿ‰Æً أو 
£ إذا ازدادت ارة ا¥œ› أو „Š °‰¡̄ ارŒ Å . Poly وا™
ـ • Ï¢ ت وا ëاد  إ°Œ‚ ƒ ̄„ أ̈ . وÀ­£¥
 ً  أو دا¥ ً  É ا…

Text truncated - open the document above for the full version.

VOYAGER FREE 20 TRUE WIRELESS EARBUDS IMMERSIVE AUDIO WITH ADAPTIVE ANC LONGLASTING COMFORT UP TO 8 HOURS TALK/LISTEN TIME SPECS Up to 7.8 hours listen time (ANC on) Up to 12 hours listen time (ANC o) Up to 4 days standby time 5-minute fast charge for up to 1 hour of listen time Bluetooth® v5.4 Wireless range: up to 100 ft/30 m CONTENTS Headset Charge case Extra small, small, medium and large silicone ear tips USB-C charging cable User guide 01.24 EN Experience the simplicity of earbuds that power your day– immersive audio and all-day comfort. SC DE Erleben Sie die Leichtigkeit von Kopfhörern, die Ihren Tag beflügeln– beeindruckenden Klang und ganztägigen Komfort. ES Experimenta la simplicidad de los auriculares que potencian tu día: audio inmersivo y comodidad durante todo el día. FR Découvrez la simplicité des écouteurs qui agrémentent votre journée: un son immersif et un confort qui dure toute la journée. IT Prova la semplicità degli auricolari che danno energia alla tua giornata: audio coinvolgente e comfort per tutto il giorno. JA あなたの一日に力を！シンプルなイヤ ーフォンを体験してください 。オーデ ィオに没入し終日快適に過ごせます。 KO 몰입감 넘치는 오디오와 하루 종일 편안함을 선사하는 이어버드의 간결함을 경험해 보세요. PT Experimente a simplicidade dos fones de ouvido que potenciam o seu dia: áudio envolvente e conforto todo o dia. https://www.hp.com/voyager-free-20 Limited Warranty: 2-yr (2-yr AU and NZ) 2-yr/2-an/2-Jahr Guarantee (Russia and CIS) 2-yr/2-ans/2-Jahres Guarantee (rest of Europe and Africa) poly.com/support poly.com/support HP Inc. UK Ltd. Regulatory Enquiries Earley West 300 Thames Valley Park Drive Reading, RG6 1PT United Kingdom HP REG 23010, 08028 Barcelona, Spain Apple, iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark "iPhone" is used in Japan with license from Aiphone K.K. Learn more here about this product ©2024 HP Development Company, L.P. The information contained herein is subject to change without notice. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. www.poly.com/patents. pn223080-01 Project: RETAIL PKG SLEEVE, VOYAGER FREE 20, WW Date: 22JAN24 Component: SLEEVE File Name: 223081_01_VOY 20_SLEEVE_WW_22JAN24.ai Art Master Number: 22308101 Part Number: 22308001 Scale: 1:1 Resolution: 300dpi Placed Links: EMU_hero production hero-3-1, EMU_case front_B and C open-1-1 Fonts: GoodPro-Light, GoodPro-Medium, KozGoPro, Lato Regular, HelveticaNeue, Lato Bold, Lato Semibold, DFPYuan Std W3, Adobe Std L, Noto Sans CJK JP Light, Helvetica Neue 57 Condensed, GoodHeadlinePro-Bold, GoodHeadlinePro-XCondBold, GoodPro-Bold, ±º∏≤. Software: Adobe Illustrator CC Printing Method: OFFSET Inks and Finishes: (if applicable, include Cyan, Magenta, Yellow, Black) CYAN PMS 2028 MAGENTA SPOT UV GLOSS VARNISH: see UV layer YELLOW DULL FINISH, scu resistant thin lm laminate BLACK Notes: Production Designer: Dora Wang E-mail: [email protected] Phone: 4088931766 Revisions: E-mail: Changes to art after approval: Include date and give brief description Dieline Color Photography Tex t Other

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name HP Inc. Address 1501 Page Mill Road, Palo Alto California 94304 United States FRN 0027240845 Grantee Code AL8 FCC ID AL8-VF2R Authorized Contact Name Ismael Talancon Lara Contact Email [email protected] Contact Phone +52 664 647-4968 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [ HP Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ HP Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2024-01-30 Print Name: Ismael Talancon Lara Title: Manager, Hybrid System & Peripheral Compliance *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2024-01-18 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: HP Inc. Company Name: HP Inc. FRN: 0027240845 FRN: 0027240845 Grantee Code: AL8 Contact Name: Ismael Talancon Lara Contact Name Ismael Talancon Lara Address: 1501 Page Mill Road, Palo Alto California 94304 United States Address: 1501 Page Mill Road, Palo Alto California 94304 United States City/Province/Zip: City/Province/Zip: Telephone: +52 664 647-4968 Telephone: +52 664 647-4968 Fax: (970)-898-8713 Fax: (970)-898-8713 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: AL8-VF2R ATTN: Director of Certification: We, HP Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, HP Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Ismael Talancon Lara Name (Printed): Ismael Talancon Lara Title: Manager, Hybrid System & Peripheral Compliance Title: Manager, Hybrid System & Peripheral Compliance Signature: Signature:

HP Inc. Date: 01/18/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:AL8-VF2R To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with HP Inc. This authorization is valid until further written notice from the applicant. Print Name: Ismael Talancon Lara Title: Manager, Hybrid System & Peripheral Compliance Signature: On behalf of Company: HP Inc. Telephone:+52 664 647-4968 E-mail: [email protected]

HP Inc. 3390 E Harmony Rd Fort Collins, CO 80528 USA Authorization on Behalf of HP Inc. for the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1.I , Richard P. Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (“HP”) and Applicant/Grantee Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to make this Authorization on HP’s behalf. 2.T his Authorization will designate the person named below to act on my behalf and HP’s behalf as an authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests fo r c onfidentiality, shall have the same effect as mine . N ame: Ismael Talancon Lara Title: Manager, Hybrid System & Peripheral Compliance Address: Poly Com S. de R.L. de C.V. Boulevard Bellas Artes No. 20308, Colonia Ciudad Industrial Tijuana, BC Mexico 22444 Telephone: +52 664 647-4968 E-mail: [email protected] 3.Q uestions about the scope and effect of this Authorization should be addressed as follows: Richard P. Tarsio US/Canada Technical Regulations & Standards Engineer Worldwide Technical Regulations HP Inc. (A ) 3390 E ast Harmony Road, MS 66 Fort Collins, CO 80528 (T ) + 1 970 898 8713 (E ) ri [email protected] 4.I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Fort Collins, Colorado on the date indicated below my signature. R ichard P. Tarsio US/Canada Technical Regulations & Standards Engineer HP Inc. Date: 8 January 2024

HP Inc. Date: 01/18/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 From: Regarding: Confidentiality…

Text truncated - open the document above for the full version.