AL8-BBPWireless Stereo Headphone

The first time you power on your headphones the pairing process begins. NOTE If your phone supports Near Field Communication (NFC) go to NFC pairing (Android). 1 Holding your headphones, slide the power switch to the on position. The headphone LEDs flash red and blue. R GET PAIRED 2 Activate Bluetooth ® on your phone and set it to search for new devices. •iPhone ® Settings > Bluetooth > On* •Android ™ > Bluetooth: On > Scan for devices* *Menus may vary by device. 3 Select “PLT_BBPRO.” Once successfully paired, the headset LEDs stop flashing. NFC pairing (Android) 1 Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.) 2 Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If necessary, accept the connection. NOTE The headphone’s NFC tag is located on the outside of the left ear cup. (Phone tag locations vary.) ANC RL ANC TAKE CONTROL Active Noise Canceling (ANC) Slide the switch to activate or deactivate ANC. ANC will block out unwanted noise. Play/pause music Tap the Play/pause button on the left ear cup to play or pause music Volume Rotate the volume wheel forward (+) or backward (–) to control the volume. Track selection Rotate the track wheel forward or backward to control the track selection. Open mic While listening to music, you will be able to hear your surroundings by tapping the Mic button to activate or deactivate the mic. Voice enabaled assistant To activate Siri or Google Voice, press the Call button for 3 seconds. (Devices may vary.) Answer or end a call Tap the Call button on the right ear cup. Decline a call Press the Call button for 2 seconds. Mute During a conversation, press the Mic button . You hear “mute on” or “mute off.” While the microphone is muted, an alert repeats every 15 minutes. Call back last call Double-tap the Call button . It takes up to 2 hours to fully charge your headphones. The LEDs turn off once charging is complete. = = = = = TIP: To check the headphones battery status, tap the Call button while wearing your headphones. Headphones must be in idle state. Your headphones have up to 24 hours of listening time. CHARGE Adjust the headphones for a comfortable fit Lengthen or shorten the band until it fits comfortably. When not using your headphones, fold the ear cushions in and against your body. ADJUST THE FIT 1 Press and hold the Call button until the LEDs flash red and blue. 2 Activate Bluetooth on your second device and follow steps 2 and step 3 in "Get Paired." PAIR SECOND DEVICE Smart sensors respond when you put on or take off your headphones. Putting on your headphones will: • Play music • Activate noise cancelling (when switched on) Taking off your headphones will: • Pause music • Deactivate noise cancelling (when switched on) USE SENSORS Use your headphones when the battery is exhausted or when traveling. Plug in the provided 3.5 mm in-line cable to the headphone (located on the left ear cup) and device. NOTE When using your headphones in this mode turns off Bluetooth. All other features will function in this mode. (Some phones may vary.) AIRPLANE MODE When listening to music, you will be able to hear your surroundings by activating Open Mic . To increase or decrease the microphone level, rotate the volume wheel forward (+) or backward (–). To cancel Open Mic, press the Mic button again. ADVANCED OPEN MIC Your headphones speak in English. You can change the language and other settings using your PC/Mac, Plantronics tool, and the provided USB cable. The MyHeadset ™ Updater (plantronics.com/myheadset) tool enables you to: • Change language • Receive firmware updates • Turn prompts on/off • Turn "mute off" voice alert on/off • Turn smart sensors on/off CUSTOMIZE GET STARTED NIRVANA ® Designed in Santa Cruz, California Find a local support number plantronics.com/support Read detailed online user guide plantronics.com/documentation NEED MORE HELP? © 2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. Patents TEXT pnXXXXX-XX (02.14) amXXXXX-XX FCC statement · This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ·This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. ·These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Ca…

Text truncated - open the document above for the full version.

Plantronics, Inc. Date: 2014.5.5 Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-BBP ATTESTATION FCC ID: AL8-BBP Product: Wireless Stereo Headphone Model: BackBeat PRO We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Peter Clark Sr. Manager, WW Compliance Engineering Plantronics, Inc.

RF_160, Issue 02 Plantronics, Inc. We Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA95060 USA City: California. Country: United States . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Wireless Stereo Headphone............ Type designation: BackBeat PRO  Trademark: Plantronics on our behalf. Date:  2014-5-5.. City:  Santa Cruz .. Name:  Peter Clark.. Function: ......Sr. Manager, WW Compliance Engineering .......... Signature: ............................................................ Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Plantronics, Inc. Date：2014.5.5 Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-BBP Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 DFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices.. We are requesting the commission to grant 90 days short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Peter Clark \ Sr. Manager, WW Compliance Engineering Plantronics, Inc.

Plantronics, Inc. 345 Encinal Street, Santa Cruz, CA95060 USA Attestation for FCC Declaration of Conformity FCC ID: AL8-BBP Date: 2014/05/06 Please be notified that we, the undersigned, Plantronics, Inc. declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. The test report number supporting the DOC is 1430276R-RF-US-P01V01Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827.

待測物相片 (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (Adapter)

EUT Photograph (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo

FCC Part15 Subpart B Test Report Product Name : Wireless Stereo Headphone Model No. : BackBeat PRO FCC ID : AL8-BBP IC : 457A-BBP Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Date of Receipt : Mar. 13, 2014 Test Date : Mar. 13, 2014~ Apr. 01, 2014 Issued Date : Apr. 25, 2014 Report No. : 1430276R-RF-US-P01V03 Report Version : V 1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No.: 1430276R-RF-US-P01V03 Page: 2 of 37 Test Report Certification Issued Date : Apr. 25, 2014 Report No. :1430276R-RF-US-P01V03 Product Name : Wireless Stereo Headphone Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Manufacturer : Weifang GoerTek Electronics Co,.Ltd. Address : Weifang Free Trade Zone, Gaoxin 2 Road, High-Tech Industrial Development Zone, Weifang, Shandong Province, 261205, China Model No. : BackBeat PRO FCC ID : AL8-BBP IC : 457A-BBP EUT Voltage : DC 3.7V Brand Name : Plantronics Applicable Standard : FCC Part 15 Subpart B: 2012 Class B ANSI C63.4: 2009 ICES-003 Issue 5: 2012 Class B Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : Reviewed By : Approved By : Report No.: 1430276R-RF-US-P01V03 Page: 3 of 37 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC Japan :VCCI China :CNAS Report No.: 1430276R-RF-US-P01V03 Page: 4 of 37 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................ 5 1.1. EUT Description ...................................................................................................... 5 1.2. Mode of Operation .................................................................................................. 8 1.3. Tested System Details ............................................................................................ 9 1.4. Configuration of Tested System ............................................................................ 10 1.5. EUT Exercise Software ......................................................................................... 12 2. Technical Test ....................................................................................................... 13 2.1. Summary of Test Result ........................................................................................ 13 2.2. List of Test Equipment .......................................................................................... 14 2.3. Measurement Uncertainty ..................................................................................... 15 2.4. Test Environment .................................................................................................. 16 3. Conducted Emission ............................................................................................. 17 3.1. Test Specification .................................................................................................. 17 3.2. Test Setup ............................................................................................................. 17 3.3. Limit ...................................................................................................................... 17 3.4. Test Procedure ..................................................................................................... 17 3.5. Deviation from Test Standard ................................................................................ 18 3.6. Test Result ............................................................................................................ 19 4. Radiated Emission ................................................................................................ 27 4.1. Test Specification .................................................................................................. 27 4.2. Test Setup ............................................................................................................. 27 4.3. Limit ..........................................................................................…

Text truncated - open the document above for the full version.

Test Setup Photograph Test Mode: Mode 1 Description: Front View of Conducted emission Test Setup Test Mode: Mode 1 Description: Side View of Conducted emission Test Setup Description: Radiated Emission Test Setup for Below 30MHz Description: Radiated Emission Test Setup for Below 1GHz Description: Radiated Emission Test Setup for 1~18GHz Description: Radiated Emission Test Setup for Above 18GHz