AL8-BT600Bluetooth USB Dongle

Madone/Madone-M User Guide Contents Overview3 Charge stand3 Headset 3 USB Bluetooth adapter4 Connect and pair5 Connect to PC5 Pair your headset5 Fit and charge6 Right or left6 Charge your headset6 Load software7 Customize your headset7 The Basics8 Make/Take/End Calls8 Mute/unmute 8 Volume8 Play or pause music8 Track selection8 Use sensors8 ANC9 More Features10 DeepSleep Mode10 Pair multiple devices10 What's in the box11 Support12 2 ([ ]) ANC Volume up/down Track backward Play/pause music Track forward ANCActive noise cancelling Charge port Active call = mute/unmute, call waiting (softphone only). Idle = open mic Headset LEDs Call button ([ ]) Power button Bluetooth pair button Overview Charge stand Headset 3 USB LEDsWhat they mean Red and blue flashesPairing Solid BluePairing successful; Connected Blue flashesOn a call Solid redMute active Purple flashesStreaming music/media from computer USB Bluetooth adapter 4 Your Bluetooth USB adapter comes pre-paired to your headset. 1 Insert the Bluetooth USB adapter into your laptop or PC (not docking station). 2 Headset call control Some softphones require downloading Plantronics Hub for Windows and Mac at plantronics.com/software for headset button functionality. NOTEPlantronics Hub software allows you to customize your headset's behavior through advanced settings and options. 1 To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear "pairing" and the headset LEDs flash red and blue. 2 Activate Bluetooth on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android Settings > On > Scan for devices* NOTE*Menus may vary by device. 3 Select “PLT_Madone.” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing. NOTEYour headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Connect and pair Connect to PC Pair your headset 5 To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. TIP Your headset is smart enough to know what side you are wearing it on and all headset controls including L/R audio channels will switch with your boom side preference. Charge your headset with the charge stand or the micro USB cable. Choose: • Charge stand • Micro USB cable The headset LEDs flash when charging. It takes up to 2 hours to fully charge your headset. The LEDs turn off once charging is complete. Fit and charge Right or left Charge your headset 6 Some softphones require downloading Plantronics Hub for Windows and Mac for headset button functionality. Load Plantronics Hub for Windows and Mac by visiting plantronics.com/software. Manage your headset settings by downloading Plantronics Hub for Windows and Mac on your computer or Plantronics Hub for iOS and Android on your phone by visiting plantronics.com/software. Plantronics HubiOs and AndroidWindows and Mac Turn features on/offXX Change headset languageX Update firmwareX Customize headset settingsXX View user guideX Load software Customize your headset 7 ([ ]) ANC Answer or end a call Tap the Call button. Answer a second call First, tap the Call button to end current call, then tap the Call button again to answer new call. Call back last call (smartphone) To dial your last number you dialed, double-tap the Call button. Voice dial (smartphone) If your smartphone has a voice-enabled assistant, press and hold the Call button for 3 seconds and wait for the phone prompt. While on an active call, choose: • Tap the red Mute button • Take o/put on your headset while on an active call (active smart sensors) Mute on reminder* If you have muted an active call and you start to speak, a voice prompt or toast reminds you that you are on mute. Manage your mute settings and mute alerts by downloading Plantronics Hub for Windows and Mac at plantronics.com/software. NOTE*Plantronics Hub for Windows and Mac required. Download at plantronics.com/software Hear your surroundings Tap the red Mute button while not on a call to hear your surroundings. Rotate the volume wheel forward (+) or backward (–) to control the volume. Tap the Audio button. NOTEWith smart sensors active, taking off the headset will pause music and putting them on will resume it. Tap the Forward button or Back button to control the track selection. The Basics Make/Take/End Calls Mute/unmute Volume Play or pause music Track selection 8 With active sensorsputting on the headset will:taking off the headset will: Callanswer the callmute the headset Music/mediaresume music/media (if playing previous to taking o) pause music/media (if playing) Muteunmute if on an active callmute if on an active call Disable sensors To disable the sensors, hold both the Mute and Call buttons for more than 6 seconds until the LED ashes purple then red. Repeat to reactivate; the LED ashes purple then blue. Reset sensors You may need to reset the sensors if they are not working as expected. To reset the sensors, charge your headset on the charge stand for 10 seconds. Active Noise Cancelling (ANC) reduces unwanted noise. Slide the switch towards ANC to activate. Use sensors ANC 9 Smart sensors respond when you put on or take o your headphones. If you leave your headphones powered on but out of range of your paired phone for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone, press the Call control button to exit DeepSleep mode. Your headset can pair with up to 8 devices but only maintain 2 connections simultaneousl; this includes the Bluetooth USB adapter. If you choose to pair multiple devices and want to switch devices, manually disconnect a device from the Bluetooth settings menu to allow the headset to connect to a third paired device. Answer …

Text truncated - open the document above for the full version.

Plantronics, Inc. 345 Encinal Street, Santa Cruz, CA95060 USA Attestation for FCC Declaration of Conformity FCC ID: AL8-BT600 Date: 2015/01/14 Please be notified that we, the undersigned, Plantronics, Inc. declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. The test report number supporting the DOC is 14C0468R-RF-US-P01V01Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, __________________ Peter Clark / Sr. Manager, WW Compliance Engineering Plantronics, Inc.

Plantronics, Inc. Date: 2015-01-14 Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-BT600 ATTESTATION FCC ID: AL8-BT600 Product: Bluetooth USB Dongle Model: BT600 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Peter Clark / Sr. Manager, WW Compliance Engineering Plantronics, Inc.

RF_160, Issue 02 Plantronics, Inc. We Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA95060 USA City: California............................................................................ Country: United States ............................................................................ Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Bluetooth USB Dongle............ Type designation: BT600 .................. Trademark: Plantronics on our behalf. Date: ...... 2015-01-13.............. City: ...... California.......................... Name: ...... Peter Clark ................................ Function: ...... Sr. Manager, WW Compliance Engineering ............................ Signature: ... ............................................................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Plantronics, Inc. Date：2015-01-14 Federal Communications Commission Authorization and Evaluation Division FCC ID: AL8-BT600 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Sincerely, Peter Clark /Sr. Manager, WW Compliance Engineering Plantronics, Inc.

Plantronics, Inc. Data: 2015-03-06 Office of Engineering and Technology Federal Communication Commission 7435 Oakland Mills Road Columbia, MID 21046-1609 Subject : SHORT-TERM Confidentiality request for FCC ID: AL8-BT600 To Whom It May Concern, ___ Plantronics, Inc.___(the applicant) attests that none of the products certified under FCC ID: AL8-BT600 has been marketed in the U.S. since the certification was granted on 13/2/2015 and acknowledges that the requested exhibits for SHORT-TERM Confidentiality below have been viewable to the public since 13/8/2015. Pursuant to Section 0.457 (d)(1)(ii) and 0.459 of 47CFR, the applicant requests the following documents contained in this application be temporarily withheld from public disclosure for a period of 180 days: Type of Confidentiality Requested Exhibit Short Term External Photos Short Term Internal Photos Short Term Test Setup Photos Short Term User’s Manual _ Plantronics, Inc.______(the applicant) also acknowledges that they will also provide appropriate notice to ACB should either of the following occur: a) If the applicatnt requires aditional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date – or b) Immediately notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents above for public disclosure pursuant to the FCC Public Notice. Name / Title: Peter Clark / Sr. Manager, WW Compliance Engineer Company name: Plantronics, Inc. Tel: 831 458 7585 E-mail: [email protected]

EUT Photograph (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo

Scale: 2:1Scale: 1:1 © 2014 ART MASTER #REV #DATE:PREPARED BY:DESCRIPTION: Cydoemus 2 USB Adapter Regulatory Laser Marking Artmaster203183BJ. Yang Jan. 23, 2015 (Top Side)(Bottom Side) 3.3 mm

EUT Photograph (1) EUT Photo (2) EUT Photo

SAR Test Report Product Name : Bluetooth USB Dongle Model No. : BT600 FCC ID : AL8-BT600 IC : 457A-BT600 Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Date of Receipt : Dec. 17, 2014 Date of Test : Dec. 17, 2014 Issued Date : Jan. 07, 2015 Report No. : 14C0468R-HP-US-P03V01 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 14C0468R-HP-US-P03V01 Page: 2 of 71 Test Report Certification Issued Date: Jan. 07, 2015 Report No.: 14C0468R-HP-US-P03V01 Product Name : Bluetooth USB Dongle Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Manufacturer : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Model No. : BT600 FCC ID : AL8-BT600 IC : 457A-BT600 EUT Voltage : DC 5V Brand Name : Plantronics Applicable Standard : IEEE Std. 1528-2013, 47CFR § 2.1093 FCC KDB Publication 447498 D01v05r02 FCC KDB Publication 865664 D01v01r03 FCC KDB Publication 447498 D02v02 FCC KDB Publication 248227 D01v01r02 RSS - 102 Issue 4: 2010 IEC 62209-2: 2010 Test Result : Max. SAR Measurement (1g) 0.086 W/kg(77.1 % d/c); 0.028 W/kg(25% d/c) Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : Tested By : Approved By : Report No.: 14C0468R-HP-US-P03V01 Page: 3 of 71 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC Japan :VCCI China :CNAS Report No.: 14C0468R-HP-US-P03V01 Page: 4 of 71 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................. 6 1.1. EUT Description .................................................................................................. 7 1.2. Test Environment ............................................................................................... 10 1.3. Simultaneous Transmission Configurations ....................................................... 11 1.4. SAR Test Exclusions Applied ............................................................................. 11 1.5. Power Reduction for SAR .................................................................................. 11 1.6. Guidance Documents ........................................................................................ 11 2. SAR Measurement System .................................................................................... 12 2.1. DASY5 System Description ............................................................................... 12 2.1.1. Applications ................................................................................................... 13 2.1.2. Area Scans .................................................................................................... 13 2.1.3. Zoom Scan (Cube Scan Averaging) .............................................................. 13 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ......................................... 13 2.2. DASY5 E-Field Probe ........................................................................................ 14 2.2.1. Isotropic E-Field Probe Specification ............................................................. 14 2.3. Boundary Detection Unit and Probe Mounting Device ...................................... 15 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................ 15 2.5. Robot ................................................................................................................. 16 2.6. Light Beam Unit ................................................................................................. 16 2.7. Device Holder .................................................................................................... 17 2.8. SAM Twin Phantom ........................................................................................... 17 3. Tissue Simulating Liquid ....................................................................................... 18 3.1. The composition of the tissue simulating liquid ................................................. 18 3.2. Tissue Calibration Result ................................................................................... 18 3.2.1 Tissue Calibration Result for FCC ....................................................................... 18 3.2.2 Tissue Calibration Result for IC ................…

Text truncated - open the document above for the full version.

Test Report FCC Part15 Subpart C Product Name : Bluetooth USB Dongle Model No. : BT600 FCC ID : AL8-BT600 IC : 457A-BT600 Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Date of Receipt : Dec. 17, 2014 Test Date : Dec. 17, 2014~ Dec. 31, 2014 Issued Date : Jan. 07, 2015 Report No. : 14C0468R-RF-US-P06V01 Report Version : V 1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No.: 14C0468R-RF-US-P06V01 Page: 2 of 105 Test Report Certification Issued Date : Jan. 07, 2015 Report No. : 14C0468R-RF-US-P06V01 Product Name : Bluetooth USB Dongle Applicant : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Manufacturer : Plantronics, Inc. Address : 345 Encinal Street, Santa Cruz, CA95060 USA Model No. : BT600 FCC ID : AL8-BT600 IC : 457A-BT600 EUT Voltage : DC 5V Brand Name : Plantronics Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2014 ANSI C63.4: 2014; ANSI C63.10: 2013 Industry Canada RSS-Gen Issue 4/RSS-210 Issue 8 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : Reviewed By : Approved By : Report No.: 14C0468R-RF-US-P06V01 Page: 3 of 105 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC Japan : VCCI China : CNAS Report No.: 14C0468R-RF-US-P06V01 Page: 4 of 105 TABLE OF CONTENTS Description Page 1. General Information.................................................................................................... 7 1.1. EUT Description ......................................................................................................... 8 1.1. Mode of Operation ..................................................................................................... 9 1.2. Tested System Details .............................................................................................. 11 1.3. Configuration of Tested System ............................................................................... 12 1.4. EUT Exercise Software ............................................................................................ 13 2. Technical Test ........................................................................................................... 14 2.1. Summary of Test Result ........................................................................................... 14 2.2. Test Environment ..................................................................................................... 16 3. Conducted Emission ................................................................................................ 17 3.1. Test Equipment ........................................................................................................ 17 3.2. Test Setup ................................................................................................................ 17 3.3. Limit .......................................................................................................................... 18 3.4. Test Procedure ......................................................................................................... 18 3.5. Uncertainty ............................................................................................................... 18 3.6. Test Result ............................................................................................................... 19 4. Radiated Emission ................................................................................................... 21 4.1. Test Equipment ........................................................................................................ 21 4.2. Test Setup ................................................................................................................ 22 4.3. Limit .......................................................................................................................... 23 4.4. Test Procedure ......................................................................................................... 23 4.5. Uncertainty ..........................................................…

Text truncated - open the document above for the full version.

Test Setup Photograph for Part 15.247 Description: Radiated Emission Test Setup for Below 30MHz Description: Radiated Emission Test Setup for Below 1GHz Description: Radiated Emission Test Setup for 1~18GHz Description: Radiated Emission Test Setup for Above 18GHz