AL8-BT700Bluetooth USB adapter

Poly BT700/BT700C Bluetooth USB adapter DRAFT User Guide PLANTRONICS + POLYCOM. NOW TOGETHER AS Contents USB Bluetooth adapter3 Connect to PC4 Pair USB adapter again4 Configure USB adapter5 Support6 2 DRAFT NOTEAdapter design may vary Standard LEDs USB LEDsWhat they mean Flashing red and bluePairing Solid blueHeadset connected Flashing blueOn a call Solid redMute active Flashing purpleStreaming media from computer LEDs when Microsoft Teams* is detected USB LEDsWhat they mean Flashing red and bluePairing Solid purpleHeadset connected Flashing blueOn a call Solid redMute active Pulsing purpleMicrosoft Teams notification NOTE*Requires Microsoft Teams application USB Bluetooth adapter 3 Your Bluetooth USB adapter comes pre-paired to your headset. 1Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. 2The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid. 3Load Plantronics Hub for Windows/Mac by visiting plantronics.com/software. This allows you to customize your headset behavior through advanced settings and options. Typically, your USB adapter is pre-paired to your headset. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your headset. 1Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2Put your headset in pair mode. 3Put your Bluetooth USB adapter into pair mode by selecting "Pair" in Plantronics Hub. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid. Connect to PC Pair USB adapter again 4 Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter. Windows 1To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound >Playback tab. Select Plantronics BT700, set it as the Default Device and click OK. 2To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter. Mac 1To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Plantronics BT700. Configure USB adapter 5 Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Santa Cruz, CA 95060 United States Scorpius 171 2132 LR Hoofddorp Netherlands © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Manufactured by Plantronics, Inc. DRAFT-06 09.20 6

Regulatory Compliance Info rmation Voyager Focus 2 has a Voyager Focus 2 headset. Voyager Focus 2 UC has a Voyager Focus 2 headset and a BT700/ BT700C adapter. Voyager Focus 2 Off ce has a Voyager Focus 2 headset and a CB7222 D/CD/-M CD base. United States/Puerto Rico BC 81242 3115593 xxxxxxx FCC Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Declaration of Conformity We Plantronics Inc., 345 Encinal Street Santa Cruz, California, 95060 USA (800) 544-4660 declare under our sole responsibility that the product Voyager Focus 2/Voyager Focus 2 UC/Voyager Focus 2 Office complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no a elektronické zariadenia a batérie sa nesmú likvidovať spolu s iným netriedeným komunálnym odpadom, ale musia sa zhromažďovať samostatne. Podrobnejšie informácie nájdete na webovej stránke plantronics.com. sl Simbol prečrtanega smetnjaka pomeni, da odpadne električne in elektronske opreme ter baterij ni dovoljeno odlagati kot nerazvrščene komunalne odpadke, ampak jih je treba zbirati ločeno. Za podrobnejše informacije obiščite spletno stran plantronics.com. sv Den överkorsade soptunnan innebär att elektriskt och elektroniskt avfall och batterier inte får kasseras med osorterat hushållsavfall, utan ska samlas in separat enligt lokala lagar och förordningar. Mer detaljerad information finns på plantronics.com. tr Üzerine çarpı işareti çizilmiş bir çöp konteyneri simgesi, elektrikli ve elektronik ekipman atıklarının ve pillerin ev çöpleriyle birlikte atılmaması ve ayrı olarak toplan-ması gerektiğini belirtir. Daha ayrıntılı bilgi için plantronics.com adresini ziyaret edin. Energy efficiency – EuP framework Directive 2005/32/EC and implementing measure 1275/2008 incorporating commission regulation 801/2013: Once the headset battery is fully charged the product enters a networked standby mode. The period of time taken to enter this mode depends on how long the battery takes to fully charge. In networked standby mode the product consumes 0.695 Watts. The wireless network port(s) of this product are designed to be always active. Japan R 201-200494 R 2xx- xxxxxx R 2xx-xxxxxx R 020-190172 Korea 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 R-C-PLT-VFOCUS2 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적 으로 하며, 모든 지역에서 사용할 수 있습니다. Mexico Requisitos de la FCC (sección 15) y por el IFT Su uso está sujeto a las dos condiciones siguientes: 1. Este dispositivo no puede causar interferencias nocivas. 2. Este dispositivo debe aceptar todas las interferencias recibidas,incluidas aquellas que puedan causar un funcionamiento no deseado. Philippines - Russia Singapore Complies with IMDA Standards DA101619 Taiwan 取得審驗證明之低功率射頻器材，非經核准，公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性 及功能。低功率射頻器材之使用不得影響飛航安全及干擾合 法通信；經發現有干擾現象時，應立即停用，並改善至無干擾 時方得繼續使用。前述合法通信，指依電信管理法規定作業 之無線電通信。低功率射頻器材須忍受合法通信或工業、科 學及醫療用電波輻射性電機設備之干擾。 Thailand “ เครื่องโทรคมนาคมและอุปกรณนี้มีความสอ ดคลองตามมาตรฐานทางเทคนิคเลขที่.........” “เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอ ดคลองตามขอกําหนดของ กทช.” or Turkey EEE Yönetmeliğine Uygundur MFi Made for iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6, iPad Pro 9.7-inch, iPad Air 2, iPad mini 4, iPad (6th generation), iPad (5th generation). Learn more at plantronics.com/iCompatible © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Apple, iPad, iPad Air, iPad Pro, and iPhone, are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners. Manufactured by Plantronics, Inc. 215543-07 08.20 R-C-PLT-CB4222 R-C-PLT-BT700 R-C-PLT -BT700C guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information. In orde…

Text truncated - open the document above for the full version.

RF_160, Issue 04 Declaration of Authorization We Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA 95060 USA City: Santa Cruz Country: USA Declare that: Name Representative of agent: Kevin Tsai (1) Agent Company name: Compliance Certification Services Inc. Address: No. 11. Wugong 6th Road City: New Taipei City Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Bluetooth USB adapter Type designation: BT700 Trademark: poly Validity/ expiry date: 19 Oct 2021 on our behalf. Date: 20 October 2020.. City: Santa Cruz Name: Mark Lawson (2) Function: Director, Global Compliance Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA 95060 USA City: Santa Cruz Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: AL8-BT700 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short- Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Please keet these materials secret until the product goes to market. Date: 20 October 2020 Name and signature of applicant: Mark Lawson Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 1 / 6 Report No.: T200903W03 Rev.: 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 2 / 6 Report No.: T200903W03 Rev.: 00 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 3 / 6 Report No.: T200903W03 Rev.: 00

Merry Design Center Merry/Ray 2020-08-13 10 mm 10 mm 1/1 Confidential WREN_ID_A Artwork Merry/Ray Rev-15 7mm 5mm 3.2mm 5mm 1.7mm 2.4mm 5.2mm 1.7mm AA H0Model: BT700IC: 457A-BT700 FCC ID: AL8-BT700CNC ID: XXXXXXAnatel: xxxx-xx-xxxx CMIIT ID: xxxxxxxxxx XXXXXXXXXXXX XXXXXX XXXXXX

This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 4 / 6 Report No.: T200903W03 Rev.: 00 INTERNAL PHOTOGRAPHS OF EUT This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 5 / 6 Report No.: T200903W03 Rev.: 00 Module This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Page: 6 / 6 Report No.: T200903W03 Rev.: 00 RF IC & Crystal Antenna

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : EN/2020/90003 Page : 1 of 29 SAR TEST REPORT The following samples were submitted and identified on behalf of the client as: Product Name Bluetooth USB adapter Marketing Name BT700 USB-A Brand Name Model No. BT700 Prepared for Plantronics Inc 345 Encinal Street Santa Cruz, CA 95060 USA Standards IEEE/ANSI C95.1-1992, IEEE 1528-2013 FCC ID AL8-BT700 Date of Receipt Sep. 11, 2020 Date of Test(s) Sep. 26, 2020 Date of Issue Oct. 12, 2020 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Ltd. Central RF Lab or testing done by SGS Taiwan Ltd. Central RF Lab in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Ltd. Central RF Lab in writing. Signed on behalf of SGS Clerk / Ruby Ou Supervisor / Afu Chen Asst. Manager / John Yeh Date: Oct. 12, 2020 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : EN/2020/90003 Page : 2 of 29 Revision History Report Number Revision Description Issue Date EN/2020/90003 Rev.00 Initial creation of document Oct. 12, 2020 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park,…

Text truncated - open the document above for the full version.

FCC ID: AL8-BT700 IC: 457A-BT700 Page: 1 / 70 Report No.: T200903W03-RP1 Rev.: 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw www.ccsrf.com Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RADIO TEST REPORT FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-247 Test Standard FCC Part 15.247 IC RSS-247 issue 2 and IC RSS-GEN issue 5 Product name Bluetooth USB adapter Brand Name Model No. BT700 Test Result Pass Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. The test Result was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were given in ANSI C63.10: 2013 and compliance standards. The test results of this report relate only to the tested sample (EUT) identified in this report. The test Report of full or partial shall not copy. Without written approval of Compliance Certification Services Inc.( Wugu Laboratory) Approved by: Tested by: Kevin Tsai Dally Hong Deputy Manager Engineer Page: 2 / 70 Report No.: T200903W03-RP1 Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 October 30, 2020 Initial Issue ALL Mita Wu Page: 3 / 70 Report No.: T200903W03-RP1 Rev.: 00 Table of contents 1. GENERAL INFORMATION .................................................................................................. 4 1.1 EUT INFORMATION ............................................................................................................ 4 1.2 INFORMATION ABOUT THE FHSS CHARACTERISTICS.................................................. 5 1.3 EUT CHANNEL INFORMATION .......................................................................................... 6 1.4 ANTENNA INFORMATION .................................................................................................. 6 1.5 MEASUREMENT UNCERTAINTY ....................................................................................... 7 1.6 FACILITIES AND TEST LOCATION .................................................................................... 8 1.7 INSTRUMENT CALIBRATION ............................................................................................. 8 1.8 SUPPORT AND EUT ACCESSORIES EQUIPMENT ........................................................... 9 1.9 TEST METHODOLOGY AND APPLIED STANDARDS ....................................................... 9 2. TEST SUMMERY ............................................................................................................... 10 3. DESCRIPTION OF TEST MODES ..................................................................................... 11 3.1 THE WORST MODE OF OPERATING CONDITION .......................................................... 11 3.2 THE WORST MODE OF MEASUREMENT ........................................................................ 12 3.3 EUT DUTY CYCLE ............................................................................................................ 13 4. TEST RESULT ................................................................................................................... 14 4.1 AC POWER LINE CONDUCTED EMISSION ..................................................................... 14 4.2 20dB BANDWIDTH AND OCCUPIED BANDWIDTH (99%) .............................................. 17 4.3 OUTPUT POWER MEASUREMENT .................................................................................. 23 4.4 FREQUENCY SEPARATION ............................................................................................. 25 4.5 NUMBER OF HOPPING .................................................................................................... 28 4.6 CONDUCTED BANDEDGE AND SPURIOUS EMISSION ................................................. 30 4.7 TIME OF OCCUPANCY (DWELL TIME) ............................................................................ 35 4.8 RADIATION BANDEDGE AND SPURIOUS EMISSION .................................................... 37 APPENDIX 1 - PHOTOGRAPHS OF EUT Page: 4 / 70 Report No.: T200903W03-RP1 Rev.: 00 1. GENERAL INFORMATION 1.1 EUT INFORMATION FCC Applicant Plantronics Inc 345 Encinal Street Santa Cruz, CA 95060 USA IC Applicant PLANTRONICS INC 345 Encinal Street, Santa Cruz CA 95060 United States Of America(Excluding The States Of Alaska FCC Manufacturer Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 USA IC Manufacturer PLANTRONICS INC 345 Encinal Street, Santa Cruz…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : EN/2020/90003 Rev: 01 Page : 1 of 6 Appendix A - Photographs of Test Setup Fig.1 Photograph of the SAR measurement system Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : EN/2020/90003 Rev: 01 Page : 2 of 6 Photograph of the tissue simulant fluid liquid depth Fig.2 2450MHz 15 cm Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be…

Text truncated - open the document above for the full version.