AL8-PA50Wireless Microphone Clip

PA50 Wireless Mic Getting Started Refer to the safety instructions at the end of this guide prior to installation or use. For the full User Guide, visit www.plantronics.com/calisto800 The PA50 wireless mic is designed for use with the Calisto 800 series of multi-device speakerphones. The wireless mic provides unparalleled freedom of movement and optimal voice transmission. 1: Setup /!\ Disconnect all cables from the Calisto base. Insert wireless mic docking station firmly into the slots at the bottom of the base. Reconnect all cables. Place the wireless mic in the docking station and charge it it for a minimum of 2 hours or until the Calisto screen indicates the mic is fully charged. 2: Pairing Once the wireless mic is fully charged, on the Calisto speakerphone, go in Menu > Settings > Bluetooth Setup and select “Headset (or Wireless Mic)” and then “Pair New Headset”. Put the wireless mic in pairing mode by pressing the button for 6 seconds or until the light flashes red/green. Press “Next” to prompt Calisto to search for it. Follow the instructions on screen to complete pairing. Once it is paired, the wireless mic is connected. 3: Wearing and Use The wireless mic can be worn on a collar or lapel, see diagram for optimal location. The wireless mic can also be placed flat on a table for flexible small group conferencing. It provides 360- degree microphone coverage. Talk Time: Up to 7 hours Maximum range: Up to 45 feet/12 meters 4: Features Once undocked, press the key on the wireless mic to replace the built-in speakerphone microphone. When the wireless mic is active, the {icon} is displayed on screen and the built-in speakerphone microphone is turned off. To transfer a call from the wireless mic to the speakerphone and back, press on the speakerphone. Talk/End button: Press with one tap to answer or end a call. The key is green when you have an incoming call, red when you are on a call. Mute/Unmute buttons: press red button on both sides. The buttons light red when a call is muted. Warranty Warranty: Plantronics offers a two (2) year limited warranty. For full warranty details, conditions and technical assistance, please visit our website: www.plantronics.com/support Safety Instructions Please read the following safety and operational instructions before using your Calisto phone system. Please keep these instructions for your reference. When using this product, these basic safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons and damage to property. /!\ This symbol identifies and alerts the user to the presence of important safety warnings. Operating, storage and charging temperature is 0°C to 40°C (32°F to 104°F). /!\ Warnings o Observe all signs and instructions regarding the use of an electrical device or RF radio product in designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive atmospheres, or aircraft. o Do not insert anything into the product because this may cause damage to the internal components or cause injury to you. o Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or sink, in a wet basement, or near a swimming pool. o Use only those Plantronics products and accessories designed for use with this product. o CHILDREN. Never allow children to play with the product—small parts may be a choking hazard. o If you experience a skin irritation after using this product, discontinue use and contact Plantronics. /!\ Wireless Microphone Charging/Battery Warnings (PA50) o Use only the charging base supplied by Plantronics to charge the microphone. Do not use the charger for any other purpose. o Charge the microphone according to the instructions supplied with the unit. o Never store or use the product or charge the battery where the temperature may fall below 0°C (32°F) or rise above 40°C (104°F). o To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings: ƒ Do not dispose of the product or battery in a fire or heat above 40°C (104°F). ƒ This product has an embedded, non-replaceable battery, designed to last the life time of the product. Do not attempt to open the product or remove the battery as this may cause injury to you or damage the product. Please contact the local recycling facility for removal of the battery. ƒ Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. RECYCLING: This product must be recycled or disposed of properly. Contact your local recycling center for proper disposal instructions FCC Requirements Part 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless…

Text truncated - open the document above for the full version.

Worldwide Headquarters 345 Encinal Street Santa Cruz, CA 95060 Date: August 2, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE : Bluetooth Declaration Per FCC 15.247 Requirements To whom it may concern: Regarding FCC ID: AL8-PA50, we, the undersigned, declare that the equipment complies with the Bluetooth CORE Specification 2.1 which includes: 1) a pseudorandom hopping sequence 2) equal on average channel use 3) a receiver with a compliant input bandwidth, based on the measured 20 dB emission bandwidth 4) a receiver with the ability to hop in synchronization with the transmitter 5) a frequency hopping system compliant with all pertinent requirements when presented with a lengthy data stream 6) a frequency hopping system compliant with the non-coordination requirement Sincerely, Peter Clark Compliance Engineering Manager

Worldwide Headquarters 345 Encinal Street Santa Cruz, CA 95060 August 2, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Long Term Confidentiality FCC ID: AL8-PA50 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Sincerely, Peter Clark Compliance Manager

Worldwide Headquarters 345 Encinal Street Santa Cruz, CA 95060 August 2, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Short Term Confidentiality FCC ID: AL8-PA50 To Whom It May Concern: Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short- term confidentiality request on the following attachments until January 15, 2011. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Peter Clark Compliance Manager

Worldwide Headquarters 345 Encinal Street Santa Cruz, CA 95060 Date: August 2, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; Worldwide Headquarters 345 Encinal Street Santa Cruz, CA 95060 e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Peter Clark Compliance Engineering Manager

AL8-PA50 External Photos TOP BOTTOM Front Back Left Right

AL8-PA50 Label and Location

AL8-PA50 Internal Photos PCB Top PCB Bottom (Battery Installed) PCB Bottom (Battery Not Installed)

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 7 CERTIFICATION TEST REPORT FOR WIRELESS MICROPHONE CLIP MODEL NUMBER: PA50 FCC ID: AL8-PA50 IC: 457A-PA50 REPORT NUMBER: 10U13313-1, Revision A ISSUE DATE: AUGUST 9, 2010 Prepared for PLANTRONICS, INC. 345 ENCINAL STREET SANTA CRUZ, CA, 95060, U.S.A Prepared by COMPLIANCE CERTIFICATION SERVICES 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 2 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By -- 07/27/10 Initial Issue F. Ibrahim A 08/09/10 Revised RBW and VBW in the Hopping Frequency Separation section. F. Ibrahim REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 3 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS.................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION.................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................... 6 4.2. SAMPLE CALCULATION.............................................................................................. 6 4.3. MEASUREMENT UNCERTAINTY................................................................................ 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT................................................................................................ 7 5.2. MAXIMUM OUTPUT POWER....................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS............................................................... 7 5.4. SOFTWARE AND FIRMWARE..................................................................................... 7 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.6. DESCRIPTION OF TEST SETUP................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. ANTENNA PORT TEST RESULTS .................................................................................... 11 7.1. 20 dB AND 99% BANDWIDTH ................................................................................... 11 7.1.1. BASIC DATA RATE GFSK MODULATION......................................................... 11 7.1.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 16 7.2. HOPPING FREQUENCY SEPARATION .................................................................... 22 7.2.1. BASIC DATA RATE GFSK MODULATION......................................................... 23 7.2.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 24 7.3. NUMBER OF HOPPING CHANNELS......................................................................... 25 7.3.1. BASIC DATA RATE GFSK MODULATION......................................................... 26 7.3.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 29 7.4. AVERAGE TIME OF OCCUPANCY ........................................................................... 32 7.4.1. BASIC DATA RATE GFSK MODULATION......................................................... 33 7.4.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 35 7.5. OUTPUT POWER ....................................................................................................... 37 7.5.1. BASIC DATA RATE GFSK MODULATION......................................................... 37 7.5.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 40 7.6. AVERAGE POWER .................................................................................................... 43 7.6.1. BASIC DATA RATE GFSK MODULATION......................................................... 43 7.6.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 43 7.7. CONDUCTED SPURIOUS EMISSIONS..................................................................... 44 7.7.1. BASIC DATA RATE GFSK MODULATION......................................................... 45 7.7.2. EXTENDED DATA RATE 8PSK MODULATION................................................. 50 REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 4 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 8. RADIATED TEST RESULTS .............................................................................................. 54 8.1. LIMITS AND PROCEDURE ........................................................................................ 54 8.2. WORST-CASE BELOW 1 GHz................................................................................... 55 8.3. TX SPURIOUS EMISSIONS ABOVE 1 GHz ...........................................…

Text truncated - open the document above for the full version.

REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 81 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 10. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 82 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 83 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED BACK PHOTO REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 84 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS FRONT PHOTO X-AXIS BACK PHOTO REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 85 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. Y-AXIS FRONT PHOTO Y-AXIS BACK PHOTO REPORT NO: 10U13313-1A DATE: AUGUST 9, 2010 FCC ID: AL8-PA50 IC: 457A-PA50 Page 86 of 86 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. END OF REPORT Z-AXIS FRONT PHOTO Z-AXIS BACK PHOTO