AL8-SY40USB and Bluetooth Speakerphone

Poly Sync 40 Series Speakerphone DRAFT User Guide PLANTRONICS + POLYCOM. NOW TOGETHER AS Contents Controls3 Be safe3 LEDs3 Setup4 Corded setup4 Mobile setup4 Secure connection (pair)4 Charge5 Check battery status5 Battery status LEDs5 Charge5 Charge your mobile phone5 Load software6 Daily Use7 Power7 Answer or End a call7 Mute/Unmute7 Volume7 Voice assistant (smartphone feature)7 Microsoft Teams button (Teams models only)7 Customize your speakerphone7 Support8 2 A portable speakerphone with mobile and corded connectivity. :02 Mic / Mic Mute Siri Google Assistant / Blutooth Lock Indicator Light Music ANC imer Headphones Phone Mobile Computer Camera Charging/Battery Blutooth Lock Indicator Light ANC Timer Custom Button Device Controls Headphones Mobile Computer Camera Support Settings ANC Timer Custom Button Volume Play / Pause Power Device Controls Headphones Camera Headset Lock Indicator Light ANC Timer Custom Button Device Controls Headphones Mobile Computer Camera Headset Support Settings Daisy Chain / Link Device Controls Volume Mic / Mic Mute Play / Pause Power Bluetooth pairing [not shown in draft image] Press to interact with Microsoft Teams (Teams model only, app required) Volume down Mute/unmute Volume up Call Siri, Google Assistant Default voice assistant (smartphone feature) Power on/off USB phone charge port Link 2 speakerphones Customize feature in Plantronics Hub Please read the safety guide for important safety, charging, battery and regulatory information before using your new speakerphone. LED barWhat lights mean Crossing blue patternPairing Solid bluePairing successful (connected) Flashing greenIncoming call Solid greenIn a call Solid redMute active Controls Be safe LEDs 3 Connect the USB cable from the USB port on the speakerphone to the USB port on your computer. 1To pair your mobile device with your speakerphone, slide the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LEDs pulse white. 2Activate Bluetooth on your phone and set it to search new devices, select “Poly Sync 40.” 3Pairing is successful when you hear "pairing successful" and the LED flashes blue. This feature provides extra security in a conference room setting. When enabled, a paired phone disconnects after each Bluetooth call, ensuring that the phone's audio won't continue to play through the speakerphone when not intended. Manage settings in Plantronics Hub. 1Turn on your speakerphone and press the Bluetooth button for 2 seconds. You hear "pairing" and the LEDs pulse white. 2Activate Bluetooth on your phone and set it to search new devices, select “Poly Sync 40.” 3Press the Bluetooth button again. Pairing is successful when you hear "pairing successful" and the LED flashes blue. Setup Corded setup Mobile setup Secure connection (pair) 4 To check the battery status of your speakerphone, slide the power button to the right and release. LED barBattery status Solid whiteBattery full Solid whiteBattery high Solid whiteBattery medium Solid redBattery low Red flashesBattery critical Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). The LED bar pulses while charging and turns off when fully charged. Allow 4 hours for a full charge. With the speakerphone powered on, charge your phone by connecting your phone's charge cable to the speakerphone USB port (cable not provided). Charge Check battery status Battery status LEDs Charge Charge your mobile phone 5 NOTESome softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. • Download Plantronics Hub for Windows/Mac by visiting poly.com/software. • Download Plantronics Hub for iOS/Android by visiting poly.com/software, the App Store or Google Play. Manage your headset settings with your computer or mobile device with Plantronics Hub for Windows and Mac or Plantronics Hub for iOS and Android, respectively. Plantronics HubiOS and AndroidWindows and Mac Call control for softphonesavailable for some softphones X Change headset languageXX Update firmwareXX Turn features on/offXX View user guideXX Battery meterXX Find MyHeadsetX Load software 6 Press the Power button for 2 seconds to power on or off. The LED bar illuminates when powered on. A short press of the Call button answers or ends a call. A short press of the Mute button mutes or unmutes the microphones. Press the up (+) or down (-) volume buttons for the desired volume. Adjust speakerphone microphone volume Place a test softphone call and adjust softphone volume and PC sound volume accordingly. Siri, Google Now ™ , Cortana Press and hold the Call button for 2 seconds to activate your phone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Press the Teams button to launch Microsoft Teams. NOTEThe Microsoft Teams app must be installed. Select your Custom button feature in Plantronics Hub. Choose from: • Device Status Check (default) • Clear trusted device list • Launch Alexa, Google Bisto • Siri • Play/Pause audio • Redial • Hold/Resume call Daily Use Power Answer or End a call Mute/Unmute Volume Voice assistant (smartphone feature) Microsoft Teams button (Teams models only) Customize your speakerphone 7 Support NEED MORE HELP? poly.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Santa Cruz, CA 95060 United States Scorpius 171 2132 LR Hoofddorp Netherlands © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Manufactured by Plantronics, Inc. Model ID: SY40/SY40-M xxxxxx-06 08.20 Regulatory Compliance Information United States/Puerto Rico BC 5011639 I.T.E TBD Declaration of Conformity/FCC Regulatory Information We Pl…

Text truncated - open the document above for the full version.

Plantronics Inc Date: 2020-09-08 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: AL8-SY40 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Plantronics Inc This authorization is valid until further written notice from the applicant. Print Name: Mark Lawson Title: Director, Global Compliance Signature: On behalf of Company: Plantronics Inc Telephone: +441793842416 E-mail: [email protected]

Date: 2020-09-08 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Plantronics Inc Regarding: Confidentiality Request regarding application for FCC ID: AL8-SY40 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Print Name: Mark Lawson Title: Director, Global Compliance Signature: On behalf of Company: Plantronics Inc Telephone: +441793842416 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 Applicant Legal Business Name Plantronics Inc Address 345 Encinal Street Santa Cruz California 95060 United States Grantee Code AL8 FCC ID AL8-SY40 Authorized Contact Name Mark Lawson Contact Email [email protected] Contact Phone +441793842416 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-09-08 Print Name: Mark Lawson Title: Director, Global Compliance *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM2009009056CR FCC ID: AL8-SY40 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

| 09.14.2020 | Rev.25.3p/n 218358-02 | Joe Yang Gorilla Flex Compliance Marking Artmaster (TEAMS)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 10 Internal Photos for SZEM2009009056CR FCC ID: AL8-SY40 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 10 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 10 BT ANT. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 10

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 Page: 1 of 41 FCC SAR TEST REPORT Application No.: KSEM2009001244CR Applicant:Plantronics, Inc. Address of Applicant:345 Encinal Street, Santa Cruz, CA 95060 USA Manufacturer:Plantronics, Inc. Address of Manufacturer:345 Encinal Street, Santa Cruz, CA 95060 USA Product Name:USB and Bluetooth Speakerphone Model No.(EUT): SY40-M Series Model:SY40, SY40-M Trade mark:plantronics FCC ID: AL8-SY40 Standard(s) : FCC 47CFR §2.1093 Date of Receipt: 2020-09-20 Date of Test: 2020-09-21 to 2020-09-21 Date of Issue: 2020-09-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Eric Lin Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 Page: 2 of 41 REVISION HISTORY Revision Record VersionDescriptionDateRemark 00Original2020-08-19Original Authorized for issue by: Richard.Kong/ Project Engineer Eric.Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 Page: 3 of 41 TEST SUMMARY Frequency Band Test position Test mode Max Reported SAR1g (W/kg) SAR limit (W/kg) Verdict BluetoothBody 0mmGFSK0. 0661.6 PASS Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 Page: 4 of 41 CONTENTS 1GENERAL INFORMATION..............................................................................................................................6 1.1GENERAL DESCRIPTION OF EUT.................................................................................................................6 1.1.1DUT Antenna Locations.......................................................................................................................7 1.2TEST SPECIFICATION..................................................................................................................................8 1.3RF EXPOSURE LIMITS.................................................................................................................................9 1.4TEST LOCATION.......................................................................................................................................10 1.5TEST FACILITY.........................................................................................................................................10 2LABORATORY ENVIRONMENT...................................................................................................................11 3SAR MEASUREMENTS SYSTEM CONFIGURATION.................................................................................12 3.1THE SAR MEASUREMENT SYSTEM............................................................................................................12 3.2ISOTROPIC E-FIELD PROBE EX3DV4.........................................................................................................13 3.3DATA ACQUISITION ELECTRONICS (DAE)...................................................................................................14 3.4SAM TWIN PHANTOM...............................................................................................................................14 3.5ELI PHANTOM..........................................................................................................................................15 3.6DEVICE HOLDER FOR TRANSMITTERS........................................................................................................16 3.7MEASUREMENT PROCEDURE.....................................................................................................................17 3.7.1Scanning procedure...........................................................................................................................17 3.7.2Data Storage......................................................................................................................................19 3.7.3Data Evaluation by SEMCAD............................................................................................................19 4SAR MEASUREMENT VARIABILITY AND UNCERTAINTY........................................................................21 4.1SAR MEASUREMENT VARIABILITY..............................................................................................................21 4.2SAR MEASUREMENT UNCERTAINTY...........................................................................................................22 5DESCRIPTION OF TEST POSITION.............................................................................................................23 5.1THE BODY TEST POSITION ....................................................... 23 6SAR SYSTEM VERIFICATION PROCEDURE..............................................................................................24 6.1TISSUE SIMULATE LIQUID..........................................................................................................................24 6.1.1Recipes for Tissue Simulate Liquid...................................................................................................24 6.1.2Test Liquids Confirmation..................................................................................................................25 6.1.3Measurement for Tissue Simulate Liquid..........................................................................................26…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Appendix C Calibration certificate 1. Dipole D2450V2 - SN 817(2019/06/10) 2. DAE DAE4-SN 1245(2020/05/27) 3. Probe EX3DV4-SN 3798(2020/05/29) KSEM2007000816KSEM2007000908KSEM2007000910KSEM2009001245KSEM2009001244 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200700077301 Dipole D2450V2 SN 817 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -28.5 / 52.3 / 2020/6/9 -29.3 2.81% 54.3 2.0Ω Body Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ 2019/6/10 -26.6 / 48.7 / 2020/6/9 -27.5 3.38% 49.6 0.9Ω KSEM2007000816KSEM2007000908KSEM2007000910KSEM2009001245KSEM2009001244

Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 Appendix D Photographs 1. SAR measurement System 2. Photographs of Tissue Simulate Liquid 3. Photographs of EUT test position 4. EUT Constructional Details Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 1. SAR measurement System Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 2. Photographs of Tissue Simulate Liquid Photo 1: Tissue Simulant Liquid for Head 2450 Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 3. Photographs of EUT test position Photo 2: Front Side 0mm Photo 3: Back Side 0mm Photo 4: Left Side 0mm Photo 5: Right Side 0mm Photo 6: Top Side 0mm Photo 7: Bottom Side 0mm Compliance Certification Services (Kunshan) Inc. Report No.: KSEM200900124401 4. EUT Constructional Details Photo 8: Front View Photo 9: Back View Photo 10: Left View Photo 11: Right View Photo 12: Top View Photo 13: Bottom View

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900905603 Page: 1 of 71 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2009009056CR Applicant: Plantronics Inc Address of Applicant: 345 Encinal Street, Santa Cruz, California, 95060, United States Manufacturer: Plantronics Inc Address of Manufacturer: 345 Encinal Street, Santa Cruz, California, 95060, United States Equipment Under Test (EUT): EUT Name: USB and Bluetooth Speakerphone Model No.: SY40, SY40-M   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: plantronics FCC ID: AL8-SY40 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-09-09 Date of Test: 2020-09-15 to 2020-09-29 Date of Issue: 2020-09-29 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900905603 Page: 2 of 71 Revision Record Version Chapter Date Modifier Remark 01 2020-09-29 Original Authorized for issue by: Vincent Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900905603 Page: 3 of 71 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Declaration of EUT Family Grouping: Model No.: SY40, SY40-M Only the model SY40-M was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference as below: SY40 without teams button, SY40-M with teams button. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900905603 Page: 4 of 71 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 CABLE ........................................................................................................................................... 6 4.3 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.5 TEST LOCATION ............................................................................................................................. 8 4.6 TEST FACILITY ............................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................13 6.1 ANTENNA REQUIREMENT ................................................................................................................13 6.1.1 Test Requirement: ..................................................................................................................13 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................14 7.1 CONDUCTED EMISSIONS AT AC POW ER LINE (150KHZ-30MHZ) ........................................................14 7.1.1 E.U.T. Operation .....................................................................................................................14 7.1.2 Test Mode Description .................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2009009056CR FCC ID: AL8-SY40 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions