AL8-SY60Bluetooth Speakerphone

Poly Sync 60 Series Bluetooth Speakerphone DRAFT User Guide PLANTRONICS + POLYCOM. NOW TOGETHER AS Contents Controls3 LEDs4 Be safe4 Set up, power and pair5 Power5 Corded setup5 Mobile setup5 Video camera setup6 Load software7 Daily Use8 Answer or end a call8 Mute/Unmute8 Volume8 Voice assistant (smartphone feature)8 Microsoft Teams button (Teams model only)8 Customize your speakerphone8 Charge your mobile phone8 Link speakerphones (daisy chain audio)9 Linked speakerphone audio settings9 Update firmware10 Device recovery10 Support11 2 A conference room speakerphone with mobile and corded connectivity. Volume Mic / Mic Mute NFC Siri Google Assistant :02 / Blutooth Lock Indicator Light Music ANC Timer Devices Headphones Phone Mobile Computer Camera Charging/Battery Blutooth Lock Indicator Light Music ANC Timer Custom Button Device Controls Headphones Phone Mobile Computer Camera Headset Support Settings Daisy Chain / Link Lock ANC Timer Custom Button Volume Mic / Mic Mute Play / Pause Power Device Controls Headphones Computer Camera Headset Lock Indicator Light ANC Timer Custom Button Device Controls Headphones Mobile Computer Camera Headset Support Settings Plus / Minus Daisy Chain / Link Power Device Controls Settings Plus / Minus Check / Delete Daisy Chain / Link General Indicator Light Scaled to 45% of full size NFCNear Field Communication Bluetooth pairing (not shown in draft illustration) Press to interact with Microsoft Teams (Teams model only, desktop application required) Volume down Mute/unmute Volume down Call Siri, Google AssistantDefault voice assistant (smartphone feature) Power on/off USB phone charge port Link 2 speakerphones (smartphone feature) Pause/play media (default). Customize feature in Plantronics Hub Controls 3 LED barWhat lights mean Crossing blue pattern Pairing Solid bluePairing successful (connected) Flashing green Incoming call Solid greenIn a call Solid redMute active NOTELEDs do not illuminate in standby mode. Please read the safety guide for important safety, charging, battery and regulatory information before using your new speakerphone. LEDs Be safe 4 Reverse view ANC Timer Custom Button Device Controls Headphones Camera Headset Lock ANC Timer Custom Button Device Controls Headphones Computer Camera Headset Volume Mic / Mic Mute Play / Pause Power Device Controls The speakerphone is powered on when plugged in to power outlet. The power port is on the reverse side of the speakerphone. Connect the USB cable from the speakerphone to the USB port on your computer. USB-A / USB-C 1With your speakerphone powered on, press the Bluetooth button for 2 seconds. You hear "pairing" and the LED flashes a crossing blue pattern. Poly Sync 40 “Pairing” Headphones Computer Camera Blutooth Blutooth “Phone connected” :02 Headphones Camera Headset Blutooth 2 Activate Bluetooth on your mobile device and set it to search new devices. Select “Poly Sync 60.” 3 Pairing is successful when you hear "pairing successful" and the LED flashes blue. Secure Connection (mobile) The Secure Connection feature provides extra security for Bluetooth calls in a conference room. Set up, power and pair Power Corded setup Mobile setup 5 When enabled, your paired device disconnects after each mobile call, ensuring that device audio does not play through the speakerphone when not intended. Enable in Plantronics Hub. NOTEEnabling Secure Connection disconnects previously paired devices. 1With your speakerphone powered on and Secure Connection enabled in Plantronics Hub, press the Bluetooth button for 2 seconds. You hear "pairing" and the LED flashes a crossing blue pattern. 2Activate Bluetooth on your device and set it to search new devices. Select “Poly Sync 60.” Poly Sync 40 “Pairing” Headphones Computer Camera Blutooth Blutooth “Phone connected” :02 Headphones Camera Headset Blutooth 3The Bluetooth button flashes blue. Press the Bluetooth button again to confirm the connection. Pairing is successful when you hear "pairing successful" and the LED flashes blue. “Pairing successful” 4Make or take a mobile call or play music via Bluetooth. NOTEContinue the mobile connection by pressing any button within 30 seconds after the end of a call or music. Connect your compatible video camera to the USB-A port on the speakerphone. The power port is on the reverse side of the speakerphone. NOTEVideo camera cable not provided. Video camera setup 6 Plantronics Hub is an invaluable tool. NOTESome softphones require Plantronics Hub for Windows/Mac to enable device call control (answer/end and mute) functionality. • Download Plantronics Hub for Windows/Mac by visiting poly.com/software. • Download Plantronics Hub for iOS/Android by visiting poly.com/software, the App Store or Google Play. Plantronics HubiOS and AndroidWindows and Mac Call control for softphonesavailable for some softphones ✓ Change headset language✓✓ Update firmware✓✓ Turn features on/off✓✓ View user guide✓✓ Battery meter✓✓ Load software 7 Press the Call button to answer or end a call. During an active call, press the Mute button to mute or unmute the microphones. Manage mute settings in Plantronics Hub. Press the Volume up (+) or down (-) buttons to increase or decrease volume. Adjust speakerphone microphone volume Place a test softphone call and adjust softphone volume and PC sound volume accordingly. Siri, Google Now ™ , Cortana Press and hold the Call button for 2 seconds to activate your phone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Press the Teams button to interact with Microsoft Teams when not on a call. NOTENot supported for mobile use. NOTEThe Microsoft Teams application must be installed. Select your Rocket button feature in Plantronics Hub. Choose from: • Play/pause audio (default) • Device status check • Clear trusted device list • Default voice assistant (Siri, Google Assistant) • Redial • Hold/resume call With the speakerphone powered on, charge up to …

Text truncated - open the document above for the full version.

Plantronics Inc Date: 2020-10-09 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: AL8-SY60 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Plantronics Inc This authorization is valid until further written notice from the applicant. Print Name: Mark Lawson Title: Director, Global Compliance Signature: On behalf of Company: Plantronics Inc Telephone: +441793842416 E-mail: [email protected]

Date: 2020-10-09 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Plantronics Inc Regarding: Confidentiality Request regarding application for FCC ID: AL8-SY60 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Print Name: Mark Lawson Title: Director, Global Compliance Signature: On behalf of Company: Plantronics Inc Telephone: +441793842416 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 Applicant Legal Business Name Plantronics Inc Address 345 Encinal Street Santa Cruz California 95060 United States Grantee Code AL8 FCC ID AL8-SY60 Authorized Contact Name Mark Lawson Contact Email [email protected] Contact Phone +441793842416 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-10-09 Print Name: Mark Lawson Title: Director, Global Compliance *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM2012012703CR FCC ID: AL8-SY60 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

Laser Etching | 10.21.2020 | Rev.25.3p/n 218631-01 | | Joe Yang Gorilla Huddle Compliance Marking Artmaster Laser Etching | 10.21.2020 | Rev.Ap/n 218631-02 | | Joe Yang Gorilla Huddle Compliance Marking Artmaster (TEAMS)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 9 Internal Photos for SZEM2012012703CR FCC ID: AL8-SY60 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 9 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 9

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270304 Page: 1 of 7 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2012012703CR Applicant: Plantronics Inc Address of Applicant: 345 Encinal Street, Santa Cruz, California 95060 United States Manufacturer: Plantronics Inc Address of Manufacturer: 345 Encinal Street, Santa Cruz, California 95060 United States Equipment Under Test (EUT): EUT Name: Bluetooth Speakerphone Model No.: SY60, SY60-M   Please refer to section 4.1 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: plantronics FCC ID: AL8-SY60 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-12-10 Date of Test: 2020-12-16 to 2021-01-12 Date of Issue: 2021-01-13 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270304 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2021-01-13 Original Authorized for issue by: Vincent Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270304 Page: 3 of 7 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure .................................................................................................................... 6-7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270304 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power Supply: Powered by DC 12V, 5.0A from AC adapter Model: SSC-120500 Input: AC 100-240V, 50/60Hz, 1.5A Output: DC 12V, 5.0A, 60W For BT: Operation Frequency: 2402MHz to 2480MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Bluetooth Version: V5.1 Dual mode Modulation Type: GFSK, Pi/4DQPSK, 8DPSK Channel Spacing: 1MHz Number of Channels: 79 Antenna Type: PCB Antenna Antenna Gain: 1.67dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 Dual mode Modulation Type: GFSK Channel Spacing: 2MHz Number of Channels: 40 Antenna Type: PCB Antenna Antenna Gain: 1.67dBi Remark: NFC is passive. Remark: Model No.: SY60, SY60-M Only the model SY60-M was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on SY60 without teams button, SY60-M with teams button. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270304 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178.…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270302 Page: 1 of 86 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2012012703CR Applicant: Plantronics Inc Address of Applicant: 345 Encinal Street, Santa Cruz, California 95060 United States Manufacturer: Plantronics Inc Address of Manufacturer: 345 Encinal Street, Santa Cruz, California 95060 United States Equipment Under Test (EUT): EUT Name: Bluetooth Speakerphone Model No.: SY60, SY60-M   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: plantronics FCC ID: AL8-SY60 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-12-10 Date of Test: 2020-12-16 to 2021-01-12 Date of Issue: 2021-01-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270302 Page: 2 of 86 Revision Record Version Chapter Date Modifier Remark 01 2021-01-13 Original Authorized for issue by: Vincent Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270302 Page: 3 of 86 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Remark: Model No.: SY60, SY60-M Only the model SY60-M was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on SY60 without teams button, SY60-M with teams button. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201270302 Page: 4 of 86 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 CABLE ........................................................................................................................................... 6 4.3 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY ......................................................................................................... 7 4.5 TEST LOCATION ............................................................................................................................. 8 4.6 TEST FACILITY ............................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 8 5 EQUIPMENT LIST ............................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................13 6.1 ANTENNA REQUIREMENT ................................................................................................................13 6.1.1 Test Requirement: ..................................................................................................................13 6.2 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........14 6.2.1 Test Requirement: ....…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2012012703CR FCC ID: AL8-SY60 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Radiated Spurious Emissions