AL8-VYGSBluetooth Headset

GET PAIRED The first time you power on your headset, it begins voice-guided language selection and the pairing process. Language selection 1 Wearing your headset, power it on. Follow the voice-guided prompts to select the headset language. 2 When completed, you hear “pairing.” Answer a call Choose: • Put on the headset to answer call, or • Say “answer” after call is announced, or • Tap the Call button Decline a call Choose: • Say “ignore” after call is announced, or • Press Call button for 2 seconds End a call Tap the Call button to end current call. RESELECT LANGUAGE Reselect the headset language at any time by putting your headset into pair mode. 1 Wearing your headset, power it on. 2 Press and hold the Call button until you hear “pairing.” 3 Follow voice-guided prompts to select the headset language. USE SENSORS Smart sensors respond when you put on or take off your headset. Putting on your headset will: • Answer an incoming call • Transfer an active call from your phone • Resume streaming audio Taking off your headset will: • Transfer an active call to your phone handset • Pause streaming audio • Lock the Call button to avoid accidental calls • Deactivate mute CHARGE It takes 1.5 hours to fully charge the headset. The indicator light turns off once charging is complete. To check the headset battery status, tap the Call button while wearing your headset or tap the Voice button and say “Check battery.” TIPS Go to plantronics.com/documentation and download the online user guide to learn how to: • Use multipoint • Update language and configure settings • Receive firmware upgrades • Get the Find MyHeadset ™ app . Reset sensors You may need to reset the senors periodically for optimal performance. To reset them, take the headset off, hold it by the boom, power it off for at least 3 seconds and power it on again. Disable sensors To disable the smart sensors, hold the Voice and Call button for more than 6 seconds until the LED flashes purple then red. Press again to reactivate; the LED flashes purple then blue. TAKE CONTROL FIND YOUR FIT The loop of the gel eartip tucks into the back curve of your ear for a stable fit. 1 With the headset powered off, replace the eartip with one of the two alternate sizes if it feels loose or tight in your ear. 2 To adjust the fit, rotate the eartip on the headset or add the optional clip-on earloop. Mute During a conversation, tap the Mute button . You will hear “mute on” or “mute off.” An alert repeats every 15 minutes when mute is on. Call back last call Double-tap the Call button . Voice dial (phone feature) Press the Call button for 2 seconds, wait for phone prompt and then tell the phone to dial the name of a stored contact. Play or pause streaming audio A 2-second press of the Voice button will either pause or resume playback of streaming audio. Taking on or off the headset will also play/pause streaming audio. Answer a second call First, tap the Call button to end current call, then tap the Call button again to answer new call. © 2013 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. Patents 200461-01 BETA 9.13 MODEL PITE14 NEED MORE HELP? Read the guides for setup, use and safety. For more help, don’t return to the store; find a local phone support number at plantronics.com/support TRY VOICE COMMANDS Tap the Voice button , wait for a command request, then say a command. “What can I say?” tells you the full list of available commands. To disable the “answer/ignore” voice commands: 1 Power on the headset. 2 Press and hold the Voice button until you hear “voice answer off.” 3 Repeat to reactivate the voice answer commands. NOTE If your phone supports Near Field Communica- tion (NFC), go to NFC pairing. Bluetooth pairing 1 Activate Bluetooth on your phone and set it to search for new devices. iPhone* Settings > Bluetooth > On Android ™ Smartphones* Settings > Wireless & Networks > Bluetooth: On > Scan for devices. * Menus may vary by device. 2 Select “PLT_VoyagerS.” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear “pairing successful.” GET STARTED VOYAGER S ™ SERIES Designed in Santa Cruz, California NFC pairing 1 Ensure NFC is on and your phone’s display is unlocked. 2 Tap and hold the headset to the phone’s NFC tag location until NFC pairing completes. If necessary, accept the connection. NOTE The headset’s NFC tag is located on the top of the headset. Phone NFC tag locations vary. voice

en For Your Safety fr Pour Votre Sûreté es Para Su Seguridad pt Para Sua Segurança 2 en 3 Important Safety and Operational Information Please read the following safety and operational instructions before using your headset/headphones and accessories. Please keep these instructions for your reference. Additional warnings may be present on the product, packaging, or in the user instructions. This symbol identifies and alerts the user to the presence of important safety warnings. General Operating, storage and charging temperature is 0°C to 40°C (32°F to 104°F). Warnings • Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset /headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before putting your headset or headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset or headphones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets or headphones at high volume levels. 4. Turn the volume down if the sound from the headset/ headphones prevent you from hearing people speaking near you. See www.plantronics.com/healthandsafety for more information on headsets/headphones and hearing. • Use of a headset/headphones that cover both ears will impair your ability to hear other sounds. Use of such headset/ headphones while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most regions. • Check local laws regarding use of a mobile phone and headset/ headphones while driving. If you use the headset/headphones while driving ensure your attention and focus remain on driving safely. • Observe all signs and instructions that require an electrical device 4 en 5 or RF radio product to be switched off in designated areas, such as gas/refueling stations, hospitals, blasting areas, potentially explosive atmospheres, or aircraft. • This product is not a toy. Never allow children to play with the product — small parts may be a choking hazard. • Install and use eartips and earbuds in accordance with the instructions provided. Do not force eartips or earbuds down the ear canal. If either becomes lodged in the ear canal, seek medical attention immediately. • Ensure eartips and earbuds are kept clean and free of ear wax buildup to maintain the specified product performance. • If you experience a skin irritation after using this product, discontinue use and contact Plantronics. • Applying excessive pressure to the headset/headphones may injure the outer ear. Do not wear the headset /headphones while sleeping or in other situations where pressure may be exerted against the headset/headphones. • Do not disassemble or insert anything into the product or charger because this may cause damage to the internal components or cause injury to you. • If the product or charger: overheats; has a damaged cord or plug; has been dropped or damaged; has been dropped into water, disconnect any charger from its power supply, discontinue use of the product and contact Plantronics. • Prevent rain, moisture or other liquid from coming into contact with the product to protect against damage to your headset / headphone or injury to you. This warning is not applicable for ruggedized or sports products which are designed to withstand contact with moisture. To avoid the risk of electric shock, explosion, fire or leakage of corrosive or toxic chemicals, observe the following charging and battery warnings: Charging Warnings • Use only the charger supplied by Plantronics to charge the product. Do not use the chargers for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. • If your headset / headphone is designed to be charged with your mobile phone charger using a custom adapter, use only mobile phone chargers approved and provided by your mobile phone manufacturer. • Charge the headset / headphones according to the instructions supplied with the unit. • Plug the AC adapter or charger into an outlet that is near the equipment and will be easily accessible. • Never charge the battery where the temperature may fall below 0°C (32°F) or rise above 40°C (104°F) — for example, in an unattended motor vehicle. • Avoid charging the battery while it is unattended. 6 en 7 Battery Warnings To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings: • Do not dispose of the product or battery in a fire or heat above 100ºC. • Do not open, deform or mutilate the battery as there may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. • Do not attempt to open the headset/headphones or remove the battery. Recycling: Your product and batteries must be recycled or disposed of properly. Contact your local recycling center for information on proper disposal. Regulatory Notices FCC Requirements Part 15 Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for …

Text truncated - open the document above for the full version.

Frequency (MHz) 2300 2310 2320 2330 2340 2350 2360 2370 2380 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 2510 2520 2530 2540 2550 2560 2570 2580 2590 2600 2610 2620 2630 2640 2650 2660 2670 2680 2690 2700 Point ValuesAnt. Port Input Pwr. (dBm) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Tot. Rad. Pwr. (dBm) -3.34 -3.29 -3.26 -3.13 -2.93 -2.78 -2.77 -2.79 -2.80 -2.62 -2.55 -2.59 -2.72 -2.78 -2.73 -2.69 -2.71 -2.81 -2.98 -3.10 -3.22 -3.26 -3.34 -3.32 -3.42 -3.65 -3.81 -3.97 -4.01 -4.19 -4.41 -4.63 -4.75 -4.77 -4.90 -5.15 -5.17 -5.22 -5.18 -5.27 -5.47 Peak EIRP (dBm) -0.27 -0.12 0.05 0.24 0.43 0.64 0.75 0.86 0.97 1.19 1.32 1.33 1.25 1.20 1.21 1.17 1.13 1.02 0.91 0.85 0.85 0.95 0.89 0.89 0.71 0.53 0.50 0.40 0.28 -0.07 -0.42 -0.68 -0.81 -0.85 -1.03 -1.27 -1.28 -1.36 -1.31 -1.30 -1.53 Directivity (dBi) 3.07 3.17 3.31 3.38 3.36 3.42 3.51 3.65 3.77 3.82 3.87 3.92 3.97 3.98 3.94 3.86 3.83 3.84 3.90 3.95 4.07 4.21 4.24 4.22 4.14 4.18 4.30 4.37 4.29 4.12 3.99 3.94 3.94 3.93 3.87 3.88 3.89 3.86 3.87 3.97 3.94 Efficiency (dB) -3.34 -3.29 -3.26 -3.13 -2.93 -2.78 -2.77 -2.79 -2.80 -2.62 -2.55 -2.59 -2.72 -2.78 -2.73 -2.69 -2.71 -2.81 -2.98 -3.10 -3.22 -3.26 -3.34 -3.32 -3.42 -3.65 -3.81 -3.97 -4.01 -4.19 -4.41 -4.63 -4.75 -4.77 -4.90 -5.15 -5.17 -5.22 -5.18 -5.27 -5.47 Efficiency (%) 46.36 46.92 47.20 48.62 50.98 52.67 52.90 52.59 52.51 54.66 55.61 55.03 53.51 52.78 53.32 53.86 53.63 52.31 50.32 49.00 47.62 47.22 46.29 46.51 45.46 43.18 41.64 40.11 39.73 38.09 36.24 34.47 33.46 33.33 32.36 30.56 30.39 30.03 30.32 29.69 28.37 Gain (dBi) -0.27 -0.12 0.05 0.24 0.43 0.64 0.75 0.86 0.97 1.19 1.32 1.33 1.25 1.20 1.21 1.17 1.13 1.02 0.91 0.85 0.85 0.95 0.89 0.89 0.71 0.53 0.50 0.40 0.28 -0.07 -0.42 -0.68 -0.81 -0.85 -1.03 -1.27 -1.28 -1.36 -1.31 -1.30 -1.53 NHPRP ±Pi/4 (dBm) -4.10 -4.03 -3.98 -3.82 -3.60 -3.45 -3.43 -3.44 -3.44 -3.27 -3.19 -3.24 -3.36 -3.43 -3.39 -3.35 -3.36 -3.47 -3.63 -3.74 -3.86 -3.90 -3.99 -3.98 -4.08 -4.30 -4.46 -4.62 -4.67 -4.86 -5.08 -5.29 -5.42 -5.43 -5.56 -5.81 -5.83 -5.89 -5.84 -5.92 -6.10 NHPRP ±Pi/6 (dBm) -5.36 -5.28 -5.20 -5.03 -4.80 -4.63 -4.60 -4.61 -4.61 -4.43 -4.36 -4.40 -4.52 -4.59 -4.56 -4.53 -4.55 -4.64 -4.80 -4.91 -5.03 -5.07 -5.15 -5.13 -5.23 -5.45 -5.60 -5.77 -5.82 -6.03 -6.25 -6.46 -6.59 -6.59 -6.70 -6.95 -6.97 -7.02 -6.97 -7.03 -7.18 NHPRP ±Pi/8 (dBm) -6.49 -6.40 -6.31 -6.14 -5.89 -5.73 -5.69 -5.69 -5.68 -5.51 -5.43 -5.46 -5.58 -5.64 -5.61 -5.57 -5.58 -5.66 -5.81 -5.92 -6.05 -6.08 -6.17 -6.15 -6.25 -6.47 -6.63 -6.80 -6.87 -7.08 -7.31 -7.53 -7.65 -7.65 -7.76 -8.00 -8.02 -8.07 -8.02 -8.06 -8.19 Upper Hem. PRP (dBm) -6.30 -6.30 -6.27 -6.08 -5.82 -5.66 -5.62 -5.59 -5.53 -5.32 -5.26 -5.32 -5.42 -5.46 -5.42 -5.44 -5.52 -5.68 -5.88 -5.98 -6.08 -6.07 -6.15 -6.15 -6.29 -6.51 -6.60 -6.70 -6.71 -6.92 -7.16 -7.37 -7.48 -7.50 -7.67 -7.95 -7.99 -8.07 -8.10 -8.28 -8.52 Lower Hem. PRP (dBm) -6.40 -6.29 -6.27 -6.20 -6.05 -5.93 -5.94 -6.03 -6.10 -5.97 -5.88 -5.91 -6.05 -6.14 -6.08 -5.97 -5.92 -5.97 -6.11 -6.24 -6.40 -6.48 -6.57 -6.53 -6.58 -6.81 -7.04 -7.28 -7.36 -7.50 -7.69 -7.92 -8.07 -8.09 -8.17 -8.37 -8.38 -8.41 -8.29 -8.29 -8.44 Emerald VB1 NCVM 2450MHzAverage gain-2.55 dBm Peak gain1.33 dBi Setup:Efficiency: Pattern: XY-planeYZ-planeXZ-plane 0.00 10.00 20.00 30.00 40.00 50.00 60.00 1611162126313641 Efficiency Frequency Emerald VB1 NCVM Emerald VB1 NCVM Z X Y

RF_160, Issue 02 Declaration of Authorization We Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA 95060, USA City: Santa Cruz Country: USA Declare that: Name Representative of agent: Willis Chen (1) Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Rd., Wuku Industrial Zone City: Wuku Area, New Taipei City Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Bluetooth Headset Type designation: PITE14 Trademark: Plantronics on our behalf. Date: Oct. 22, 2013 City: Santa Cruz Name: Peter Clark (2) Function: Sr. Manager, WW Compliance Engineering Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Plantronics, Inc. Address: 345 Encinal Street, Santa Cruz, CA 95060, USA City: Santa Cruz Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: AL8-VYGS Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Avoid premature release of sensitive information prior to maketing or release of the product to the public. Disclosure or publication or any portion of this company confidential material ot other parties could cause substantial competitive harm and provide unjustified benefits for competiriors. Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Date: Oct. 22, 2013 Name and signature of applicant: Peter Clark Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 EXTERNAL PHOTOGRAPHS OF EUT Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustria…

Text truncated - open the document above for the full version.

2013 CMF SPECIFICATION Core Team Engineer: APPROVALS CMF Director: Core Team Designer: Product Manager: Program Manager: DOC CONTROL #REV #SCALE:SHEET # Rev 35 08.21.13 Emerald Regulatory Marking Pierre Harper / G.M. DESCRIPTION: 1/1 1:1 200842 G. Magnusson REF. PART #PREPARED BY:DATE: Pierre HarperJacob MeybergThomas CriswellJan Calderella Scale: 1 = 1 REGULATORY LABEL Color: Pantone Black C Material: Laser etched Finish: Matte BOTTOM HOUSING SW MY Model: PITE14 C C A H 1 2 L P 0 8 9 0 T 8 2 0 3 - J N 0 1 2 9 F C C I D : A L 8 - V Y G S I C : 4 5 7 A - V Y G S C M I I T I D : X X X X X X X X X X R S/N: XXXXXX SW MY Model: PITE14 C C A H 1 2 L P 0 8 9 0 T 8 2 0 3 - J N 0 1 2 9 F C C I D : A L 8 - V Y G S I C : 4 5 7 A - V Y G S C M I I T I D : X X X X X X X X X X R S/N: XXXXXX

Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 3 INTERNAL PHOTOGRAPHS OF EUT Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 1 Open View of EUT – 2 Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 3 Internal View of EUT – 1 Report No.: EF/2013/90012 FCC ID: AL8-VYGS Issue Date: Oct. 21, 2013 IC: 457A-VYGS Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be pro…

Text truncated - open the document above for the full version.