APV-3640LBHeavy Duty Telematics Gateway

6/26/2019 HMU-3640 Hardware & Installation Guide - PULS Wiki 1 /23 HMU-3640 Hardware & Installation Guide HMU-3640™ Hardware and Installation Guide IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU HAVE READ AND AGREED TO THE LICENSE AGREEMENT AND REVIEWED THE LIMITED WARRANTY AND REGULATORY INFORMATION. 1 Introduction Welcome to the HMU-3640™ Hardware and Installation Guide. This manual is intended to give you information on the basic setup and installation of the CalAmp HMU-3640™ product(s) including hardware descriptions, environmental specifications, wireless network overviews and device installation. 1.1 About This Manual The HMU-3640™ is a next generation telematics gateway that includes a range of wireless and peripheral connectivity options and is equipped with CalAmp’s purpose built vehicle interface technologies for heavy duty vehicles. In order to accurately describe the functionality of these units we have broken this manual into the following sections: System Overview – A basic description of a CalAmp HMU-3640™. This includes a description of roles and responsibilities of each of the CalAmp components as well as a brief overview of the wireless data technologies used by the HMU-3640™. Hardware Overview – Describes the physical characteristics and interfaces of the HMU-3640™. Installation and Verification – Provides guidance for the installation of the HMU-3640™ versions in a vehicle and instructions on how to verify the installation is performing adequately. 1.2 About The Reader In order to limit the size and scope of this manual, the following assumptions have been made about the reader. 1 . You are familiar with GPS concepts and terminology 2 . You have some experience with installing equipment in vehicles 3 . You are familiar with the use of AT Commands 4 . You are familiar with the use of terminal programs such as HyperTerminal or PuTTY 1.3 About CalAmp CalAmp (NASDAQ: CAMP) is a telematics pioneer leading transformation in a global connected economy. W e help reinvent businesses and improve lives around the globe with technology solutions that streamline complex IoT deployments and bring intelligence to the edge. Our software applications, scalable cloud services, and intelligent devices collect and assess business-critical data from mobile assets, cargo, companies, cities and people. We call this The New How, powering autonomous IoT interaction, facilitating efficient decision making, optimizing 6/26/2019HMU-3640 Hardware & Installation Guide - PULS Wiki 2/23 resource utilization, and improving road safety. CalAmp is headquartered in Irvine, California and has been publicly traded since 1983. LoJack is a wholly owned subsidiary of CalAmp. For more information, visit calamp.com, or LinkedIn, Twitter, YouTube or CalAmp Blog. 1.4 About the CalAmp Location Messaging Unit - HMU-3640™ The HMU-3640™ utilizes a ruggedized design to perform in arduous conditions and rugged construction equipment environment with extended temperature operation. Enhanced electrical interfaces give the HMU-3640™ a unique and versatile environment in heavy duty conditions, while delivering critical data to the end customer. The built-in ECU (Engine Control Unit) interface reads and transmits engine condition and performance data such as engine temperature and fault codes from heavy duty vehicle to provide the best possible real-time picture of vehicle health. In addition, it supports separate ARM (Advanced RISC Machine) cortex micro-controller to support hosted application features. The CalAmp HMU-3640™ is a mobile device that resides in private, commercial or government vehicles. The HMU-3640™ is a single box enclosure incorporating a processor, a GPS receiver, a wireless data modem, and a vehicle-rated power supply. The HMU-3640™ also supports inputs and outputs to monitor and react to the vehicular environment and/or driver actions. The HMU-3640™ collects, stores and transmits vehicular and location data over a designated wireless network including LTE and HSPA. Vehicular and location data are transmitted to a customized software application that has been designed to receive, acknowledge, process, store, and respond to this data. Unit location and vehicular information is sent at pre-determined intervals, on demand, or when pre-programmed vehicular conditions are met. Transmission of data are sent immediately when in wireless network coverage and stored for later transmission when out of the wireless coverage area. SMS messaging can be used as an alternative or redundant communication backup. The HMU-3640™ is designed to support a variety of custom fleet applications starting with basic automatic vehicle location and including applications requiring more sophisticated features such as geo-fencing, speed and mileage monitoring, third party security monitoring, dynamic reporting routines, and an array of exception alerts. HMU-3640™ are sold exclusively to authorized systems integrators, software firms, and service providers who have developed their offering around the capabilities of the HMU-3640™. Customers are trained by CalAmp to integrate the mobile device with their system and to assist in support and maintenance of the devices. Installations of HMU-3640™ are performed by CalAmp customers or contracted installers. Typical installations include hook-up to power, ignition, and ground. HMU-3640™s and the corresponding wiring are almost always hidden from view and general access. Placement of the units is usually under dashboards, in trunks or in compartments. 2 System Overview 2.1 Overview The entire purpose behind a fleet management system is to be able to remotely contact a vehicle, determine its location or status, and do something meaningful with that information. This could include displaying the vehicle location on a map, performing an address look-up, providing real-time driving directions, updating the vehicles ETA, monitoring vehicle and driver status or dispatchi…

Text truncated - open the document above for the full version.

Federal Communication Commission 7435 Oakland Mills Road Columbia, MD 21046 Attestation Statement according to 2.911(d)(7) FCC ID: APV-3640LB TO WHOM IT MAY CONCERN: Calamp with FCC Registration Number (FRN) 0008518615 Certifies that, as of the date of this filing of the application with the TCB, Calamp is our designated US agent for service of process for the above referenced FCC ID. Calamp accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. Calamp with FCC Registration Number (FRN) 0008518615 Accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above referenced FCC ID. Full Name: Imad Rizk Full Name: Imad Rizk Applicant: Calamp Agent Calamp Position / Title: Director of Certification Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220, Carlsbad, Ca 92008. USA Place of Issue: 2200 Faraday Ave, Suite 220,Carlsbad, Ca 92008. USA Date: Dec 6, 2023 Date: Dec 6, 2023

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: APV-3640LB TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Calamp is not identified on the Covered List as an entity producing “covered” equipment. Yours Sincerely, Full Name: Imad Rizk Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220 Carlsbad, Ca 92008. USA Date: Oct 31, 2023

Validity of Test Results from Testing / Certification of the Integrated Module To Whom It May Concern: We, Calamp, located 2200 Faraday Ave suite 220, Carlsbad, CA 92008 , due hereby declare that that the test results from conducted tests applied to the radio module: Manufacturer: Quectel Model: EG21 FCC ID: XMR202212EG21GL IC: 10224A-2022EG21GL Which is incorporated in our host equipment: Manufacturer: Calamp Model: HMU3640LB FCC ID: APV-3640LB IC: 5843C-3640LB and as reported in module test report(s): Report Number: 2212RSU048-U1, Issue Date: 07/14/2020 (Cellular, Part 22) Report Number: 2212RSU048-U1, Issue Date: 07/14/2020 (Cellular, Part 24) Report Number: 2212RSU048-U1, Issue Date: 07/14/2020 (Cellular, Part 27) Report Number: 2212RSU048-U2, Issue Date: 07/14/2020 (Cellular, Part 22) Report Number: 2212RSU048-U2, Issue Date: 07/14/2020 (Cellular, Part 24) Report Number: 2212RSU048-U2, Issue Date: 07/14/2020 (Cellular, Part 27) Report Number: 2212RSU048-U3, Issue Date: 07/14/2020 (Cellular, Part 90) Report Number: 2212RSU048-C1, RSS 132,133,139 GSM WCDMA Report Number: 2212RSU048-C2, RSS 130,132,133,139,199 LTE accurately represent the test results under the new conditions when the identified radio module is integrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation circuitry that impacts the validity of the results of the original module’s test reports; hence conducted signal measurements in the above listed reports also apply to Product/Model: HMU3640LB Full Name: Imad Rizk Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220 Carlsbad, Ca 92008. USA Date: Nov 14, 2023

Letter of Authorization and Anti- Drug Statement Applicant Name: Calamp Address: 2200 Faraday Ave, Suite 220 Carlsbad, CA 92008 Product Name: HMU3640 LTE CAT 1 Model Number: HMU3640LB FCC ID: APV-3640LB We authorize CETECOM Inc., to act on our behalf on all matters concerning the above named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? ☒ Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Full Name: Imad Rizk Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220 Carlsbad, Ca 92008. USA Date: Oct 31, 2023

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Subject: Request for Short Term Confidentiality FCC ID: APV-3640LB To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, Calamp Wireless Networks hereby requests short term confidentiality for documents filed under the following exhibit types: 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs Until the product will be publicly announced. Short term confidentiality release date / period: 180 days from grant issue date. These items contain detailed system and equipment description and related information about the product which Calamp considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Calamp also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written and in due time if we intend to market the product prior to the above specified confidentiality release date so that the short term confidentiality classification can be reset prior to product launch. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Full Name: Imad Rizk Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220 Carlsbad, Ca 92008. USA Date: Oct 31, 2023

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Subject: Request for Permanent confidentiality FCC ID: APV-3640LB To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, and KDB 726920, Calamp Wireless Networks hereby requests permanent confidentiality for documents filed under the following exhibit types: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational Description These items contain detailed system and equipment description and related information about the product which Calamp considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Calamp also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Yours Sincerely, Full Name: Imad Rizk Position / Title: Director of Certification Place of Issue: 2200 Faraday Ave, Suite 220 Carlsbad, Ca 92008. USA Date: Oct 31, 2023

Report No.: 2212RSU048-UE 1 of 2 EUT Photograph (1) EUT Photo (2) EUT Photo Report No.: 2212RSU048-UE 1 of 3 EUT Photograph (1) EUT Photo (2) EUT Photo Report No.: 2212RSU048-UE 3 of 3 (5) EUT Photo (MINIPCIE)

Radio Frequency Exposure Evaluation Report FOR: CalAmp Model: HMU3640LB Product Description: Heavy Duty Telematics Gateway FCC ID: APV-3640LB IC: 5843C-3640LB Per: CFR Part Part1 (1.1307 &1.1310), Part 2 (2.1091), FCC KDB 447498 D01 General RF Exposure Guidance v06 ISEDC RSS-102 Issue 5 Report number: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure DATE: 2023-12-11 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V5.0 2015-10-27 © Copyright by CETECOM Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure FCC ID: APV-3640LB Date of Report 2023-12-11 Page 2 of 9 IC: 5843C-3640LB Page 2 of 9 1 Assessment This RF Exposure evaluation report provides evidence for compliance of the below identified device with the RF Exposure limits for mobile devices as defined in FCC CFR Part 1 (1.1307 &1.1310), Part 2 (2.1091) and IC standard RSS-102 issue 5 under worst case conditions (measured or rated RF output power, antenna gain, distance towards human body, multiple transmitter information as presented by the applicant). In addition, maximum antenna gain or minimum distance towards the human body is calculated respectively, where relevant. The device meets the limits as stipulated by the above given FCC and IC rule parts based on available specifications for worst case conditions at 20cm distance to the body. Company Description Model CalAmp Heavy Duty Telematics Gateway HMU3640LB Report reviewed by: TCB Evaluator 2023-12-11 Compliance Arndt Stoecker (Director of Regulatory Services) Date Section Name Signature Responsible for the Report: 2023-12-11 Compliance Cheng Song (EMC Engineer) Date Section Name Signature Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure FCC ID: APV-3640LB Date of Report 2023-12-11 Page 3 of 9 IC: 5843C-3640LB Page 3 of 9 2 Administrative Data 2.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Street Address: 411 Dixon Landing Road City/Zip Code Milpitas, CA 95035 Country USA Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Director of Regulatory Services: Arndt Stoecker Responsible Project Leader: Cathy Palacios 2.2 Identification of the Client / Manufacturer Client’s Name: CalAmp Street Address: 2200 Faraday Ave #220 City/Zip Code Carlsbad, CA 92008 Country USA Identification of the Manufacturer Manufacturer’s Name: Same as Client Manufacturers Address: City/Zip Code Country Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure FCC ID: APV-3640LB Date of Report 2023-12-11 Page 4 of 9 IC: 5843C-3640LB Page 4 of 9 3 Equipment under Assessment (1) Model No: HMU3640LB HW Version : REV A SW Version : 8.6L FCC-ID : APV-3640LB IC: 5843C-3640LB FVIN: N/A HVIN: HMU3640LB PMN: HMU3640LB Product Description: Heavy Duty Telematics Gateway Radio Information: Cellular:  Module: Quectel EG21-GL_D  FCC ID: XMR202212EG21GL; IC: 10224A-2022EG21GL  LTE, UMTS, GSM Bluetooth:  Chipset: TI SimpleLink™ CC2652R7  2400 MHz – 2483.5 MHz Antenna Information as declared: Cellular:  Taoglas PCS.06.A Bluetooth:  AVX/Ethertronics 1001312 Power Supply/ Rated Operating Voltage Range: Battery powered only: 9-30 VDC Operating Temperature Range -30 C to 60 C Sample Revision Prototype Unit; Production Unit; Pre-Production Note 1: Information provided by the customer Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure FCC ID: APV-3640LB Date of Report 2023-12-11 Page 5 of 9 IC: 5843C-3640LB Page 5 of 9 4 RF Exposure Limits and FCC and IC Basic Rules 4.1 Routine Environmental Evaluation Categorical Exclusion Limits acc. to FCC 1.1307(b)(3)(i)(B). Single RF sources is exempt if the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposure FCC ID: APV-3640LB Date of Report 2023-12-11 Page 6 of 9 IC: 5843C-3640LB Page 6 of 9 4.2 ISED Exemption Limits for Routine Evaluation – RF Exposure Evaluation per IC RSS-102 Issue 5 section 2.5.2 RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows:  below 20 MHz6 and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance);  at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance);  at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. Test Report #: EMC_CALAM_136_23001_FCC_ISED_RF_Exposu…

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 2212RSU048-U1 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 2023-03-05 Template Version:0.0 1 of 33 RF SPOT CHECK REPORT FCC ID: XMR202212EG21GL Application: Quectel Wireless Solutions Co., Ltd. Product: LTE CAT1 Module Model No.: EG21-GL, EG21-GL MINIPCIE Brand Name: QUECTEL FCC Rule Part(s): Part 2, 22 (H), 24 (E), 27 Test Procedure(s): ANSI C63.26: 2015 Result: Complies Received Date: 2023-01-11 Test Date: 2023-01-12 ~ 2023-02-15 Reviewed By: Sunny Sun Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.26-2015. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2212RSU048-U1 2 of 33 Revision History Report No. Version Description Issue Date Note 2212RSU048-U1 Rev. 01 Initial Report 2023-03-05 Valid Note: The only difference between EG21-GL and EG25-GL is the type of BB chip. This report is based on FCC ID “XMR202212EG25GL” to assess the output power, band edge, radiated spurious emissions. This application for certification is leveraging the data reuse procedures from KDB 484596 based on reference FCC ID “XMR202212EG25GL” to cover this variant. Report No.: 2212RSU048-U1 3 of 33 CONTENTS Description Page 1. General Information .................................................................................................................................. 5 1.1. Applicant ...................................................................................................................................... 5 1.2. Manufacturer ................................................................................................................................ 5 1.3. Testing Facility ............................................................................................................................. 5 1.4. Product Information ...................................................................................................................... 6 1.5. Radio Specification under Testing ................................................................................................ 6 1.6. Description of Available Antennas ................................................................................................ 7 1.7. Test Methodology ......................................................................................................................... 7 2. Test Configuration .................................................................................................................................... 8 2.1. Test System Connnection Diagram ............................................................................................. 8 2.2. Test Environment Condition ......................................................................................................... 8 3. Measuring Instrument .............................................................................................................................. 9 4. Decision Rules and Measurement Uncertainty ....................................................................................10 4.1. Decision Rules ........................................................................................................................... 10 4.2. Measurement Uncertainty .......................................................................................................... 10 5. Test Result ............................................................................................................................................... 11 5.1. Summary .................................................................................................................................... 11 5.2. Equivalent Isotropically Radiated Power Measurement ............................................................ 12 5.2.1. Test Limit .................................................................................................................................... 12 5.2.2. Test Procedure ........................................................................................................................... 12 5.2.3. Test Setting ................................................................................................................................ 12 5.2.4. Test Setup .................................................................................................................................. 13 5.2.5. Test Result ................................................................................................................................. 13 5.3. Band Edge Measurement .......................................................................................................... 14 5.3.1. Test Limit .................................................................................................................................... 14 5.3.2. Test Procedure ........................................................................................................................... 14 5.3.3. Test Setting ................................................................................................................................ 14 5.3.4. Test Setup .................................................................................................................................. 15 5.3.5. Test Result ................................................................................................................................. 15 5.4. Radiated Spurious Emissions Measurement ............................................................................. 16 5.4.1. Test Limit ..…

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 2211RSU065-U1 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 2023-02-26 Template Version:0.0 1 of 65 RF MEASUREMENT REPORT FCC ID: XMR202212EG25GL Application: Quectel Wireless Solutions Co., Ltd. Product: LTE CAT4 Module Model No.: EG25-GL, EG25-GL MINIPCIE Brand Name: QUECTEL FCC Rule Part(s): Part 2, 22 (H), 24 (E), 27 Test Procedure(s): ANSI C63.26: 2015 Result: Complies Received Date: 2022-11-23 Test Date: 2022-11-24 ~ 2023-02-09 Reviewed By: Sunny Sun Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.26-2015. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2211RSU065-U1 2 of 65 Revision History Report No. Version Description Issue Date Note 2211RSU065-U1 Rev. 01 Initial Report 2023-02-26 Valid Report No.: 2211RSU065-U1 3 of 65 CONTENTS Description Page 1. General Information .................................................................................................................................. 5 1.1. Applicant ...................................................................................................................................... 5 1.2. Manufacturer ................................................................................................................................ 5 1.3. Testing Facility ............................................................................................................................. 5 1.4. Product Information ...................................................................................................................... 6 1.5. Radio Specification under Testing ................................................................................................ 6 1.6. Description of Available Antennas .....................................................................…

Text truncated - open the document above for the full version.