APV-TTU3640LABVehicular Telematics Device

April 21, 2025 Nemko North America, Inc. 303 River Road Ottawa, ON K1V 1H2 Canada TEST DATA ATTESTATION LETTER – FCC FCC: APV-TTU3640LAB This letter is to declare that CALAMP WIRELESS NETWORKS CORPORATION is reusing LTE/ HSPA (WCDMA), and BLE test data obtained during the previous FCC certification for cellular radio modules certified under FCC ID: RI7LE910NAV2 and FCC ID: APV-BLD01 respectively. Please see the enclosed Operational Description exhibit for a full set of supported frequency bands. There is no change to the originally approved module or antenna already certified, and which are being integrated into our product. The following test reports have been reviewed and remain valid and representative of performance within this product and meet the current FCC Requirements. Technology Report Number Rule Part LTE B5 & WCDMA/HSUPA B5, LTE B2 & WCDMA/HSUPA B2, LTE Band 4, 12, 13 68561RRF.001 22H, 24E, 27 WCDMA/HSPA B2 & B5 1506FR22-01 22H, 24E LTE B2, B4, B5, B12, B13, B17 1506FR21-01 22H, 24E, 27 Bluetooth FCC IC_RF_SL1802601- CAL-013-BLE 15C (15.247) New radio testing has been performed to demonstrate compliance of the already approved cell/BT modules integrated into this product. Radiated Spurious Emission has been performed for different LTE Bands with BLE for demonstration of simultaneous radio transmission compliance. RF Exposure evaluation is performed in accordance with FCC RF Exposure procedures. Sincerely, Signed: Printed name: Imad Rizk Title: Product Certification Director Company Name: CALAMP WIRELESS NETWORKS CORPORATION

www.nemko.com Nemko USA Inc., a testing laboratory, is accredited by ANAB. The tests included in this report are within the scope of this accreditation. C h o o s e S c a n d i n a v i a n t r u s t Assessment Report REP156216-4ARFWL Type of assessment: MPE Calculation report Manufacturer: Model: CalAmp TTU3640LAB Product Marketing Name (PMN): Vehicle Telematics Device FCC ID: ISED certification number: APV-TTU3640LAB 5843C-TTU3640LAB Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 6, (December 2023) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: April 16, 2026 James Cunningham, EMC/WL Manager Prepared by Signature Report reference ID: REP156216-4ARFWL Page 2 of 5 Lab locations= Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943 Designation Number: US5058 ISED Test Site 2040B-3 Prepared by James Cunningham, EMC/WL Manager Date April 16, 2026 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by ANAB, NIST, or any agency of the U.S. Government. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: REP156216-4ARFWL Page 3 of 5 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE calculation for simultaneous transmission ....................................................................................................................................................... 4 Report reference ID: REP156216-4ARFWL Page 4 of 5 Evaluation summary 1.1 MPE calculation for simultaneous transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 5 For the purpose of this standard, ISED has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 1.1-2: Table 4 to RSS-102 — RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz Report reference ID: REP156216-4ARFWL Page 5 of 5 Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) 1.1.2 EUT technical information Trans…

Text truncated - open the document above for the full version.

www.nemko.com FCC Part 207_209_Multi_TX_Evalulation.dotm, Version V1.4 Nemko USA Inc., a testing laboratory, is accredited by ANAB. The tests included in this report are within the scope of this accreditation. REP156216-03R1TRFEMC Date of issue: April 16, 2026 Applicant: CalAmp Product: Vehicle Telematics Device Model: Variant(s): TTU3640LAB N/A FCC ID: ISED certification number: APV-TTU3640LAB 5843C-TTU3640LAB Specifications:  Multi-transmitter evaluation per: FCC 47 CFR Part 15.207 and 15.209 ISED RSS-GEN Test report Report reference ID: REP156216-03R1TRFEMC Page 2 of 26 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 214630; Designation Number: US3165 ISED Test Site 2040B Tested by Ka Poon, Wireless Test Engineer Reviewed by James Cunningham, EMC/WL Manager Review date April 16, 2026 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: REP156216-03R1TRFEMC Page 3 of 26 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Exclusions ................................................................................................................................................................................................................. 4 1.3 Statement of compliance .......................................................................................................................................................................................... 4 1.4 Test report revision history ....................................................................................................................................................................................... 4 Summary of test results ...................................................................................................................................................................... 5 2.1 Sample information .................................................................................................................................................................................................. 5 2.2 Testing period ........................................................................................................................................................................................................... 5 2.3 Emissions test results................................................................................................................................................................................................ 5 Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Disclaimer ................................................................................................................................................................................................................. 6 3.2 Applicant................................................................................................................................................................................................................... 6 3.3 Manufacturer............................................................................................................................................................................................................ 6 3.4 EUT information ....................................................................................................................................................................................................... 6 3.5 EUT exercise and monitoring details ........................................................................................................................................................................ 7 3.6 EUT setup details ...................................................................................................................................................................................................... 7 Engineering considerations ................................................................................................................................................................. 9 4.1 Modifications incorporated in the EUT .........................................................................................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 68561RRF.001 2021-12-23 ISED CABid: ES1909 Test report No: NIE: 68561RRF.001 Partial Test Report Reference Standard: USA FCC Part 22, Part 24, Part 27 CANADA IC RSS-130 RSS-132, RSS-133, RSS-139, RSS-Gen (*) Identification of item tested 3G/LTE Wireless Module (*) Trademark Telit (*) Model and /or type reference LE910-NA V2 (*) Derived model not tested LE910-NA1, LE910B4-NA, LE910B1-NA Other identification of the product FCC ID: RI7LE910NAV2 IC: 5131A-LE910NAV2 HW version: 1.0 SW version: 20.00.508 (*) Features WCDMA/HSPA/LTE Applicant Telit Communications S.p.A. Via Stazione di Prosecco 5/B 34010 Sgonico - Trieste, Italy Test method requested, standard USA FCC Part 22 (10-1-20 Edition): Public Mobile Services. USA FCC Part 24 (10-1-20 Edition): Personal Communications Services. USA FCC Part 27 (10-1-20 Edition): Miscellaneous Wireless Communications Services. CANADA IC RSS-130 Issue 2, Feb 2019. CANADA IC RSS-132 Issue 3, Jan. 2013. CANADA IC RSS-133 Issue 6 Amendment 1, Jan. 2018. CANADA IC RSS-139 Issue 3, Jul. 2015. CANADA IC RSS-Gen Issue 5 (Amendment 1 (March 2019), Amendment 2 (February 2021)). ANSI C63.26-2015: American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services. KDB 971168 D01 Power Meas License Digital Systems v03r01, April. 2018 Approved by (name / position & signature) Jose Carlos Luque RF Lab. Supervisor Date of issue 2021-12-23 Report template No FDT08_23 (*) “Data provided by the client” Firmado digitalmente por 74841983Y JOSE CARLOS LUQUE (C:A29507456) Fecha: 2021.12.23 14:29:45 +01'00' DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 68561RRF.001 Page 2 of 71 2021-12-23 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 3 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 5 Identification of the client............................................................................................................. 6 Testing period and place ............................................................................................................. 6 Document history ........................................................................................................................ 6 Environmental conditions ............................................................................................................ 6 Remarks and comments ............................................................................................................. 7 Testing verdicts ........................................................................................................................... 8 Summary .................................................................................................................................... 8 Appendix A: Test results for FCC Part 22 / RSS-132. ............................................................... 10 Appendix B: Test results for FCC Part 24 / RSS-133. ............................................................... 23 Appendix C: Test results for FCC Part 27 / RSS-130 / RSS-139. .............................................. 40 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 68561RRF.001 Page 3 of 71 2021-12-23 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditation Body (ENAC -Entidad Nacional de Acreditación), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification S.A.U. is an FCC-recognized accredited testing laboratory with the appropriate scope of accreditation that covers the performed tests in this report. DEKRA Testing and Certification S.A.U. is an ISED-recognized accredited testing laboratory, CABid: ES1909, with the appropriate scope of accreditation that covers the performed tests in this report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.A.U. at the time of performance of the test. DEKRA Testing and Certification S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DE…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 22H and 24E RF Test Report Product Type ： LE910-NA V2 Applicant ： Telit Communications S.p.A. Address ： Viale Stazione di Prosecco 5/B, 34010 Sgonico- Trieste- Italy Trade Name ： Telit Model Number ： LE910-NA V2 Test Specification ： FCC 47 CFR PART 22H: Oct, 2014 FCC 47 CFR PART 24E: Oct, 2014 ANSI/TIA/EIA-603-C Application Purpose ： Original Receive Date ： Jun. 04, 2015 Test Period ： Jun. 10 ~ 18, 2015 Issue Date ： Aug. 03, 2015 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. Report Number: 1506FR22-01 1 of 70 A Test Lab Techno Corp. Revision History Rev. Issue Date Revisions Revised By 00 Jul. 28, 2015 Initial Issue 01 Aug. 03, 2015 Revised report information. Peggy Chang Report Number: 1506FR22-01 2 of 70 A Test Lab Techno Corp. Verification of Compliance Issued Date: 08/03/2015 Product Type : LE910-NA V2 Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/B, 34010 Sgonico- Trieste- Italy Trade Name : Telit Model Number : LE910-NA V2 EUT Rated Voltage : DC 3.4V / 3.8V / 4.2V Test Voltage : DC 3.8V Applicable Standard : FCC 47 CFR PART 22H: Oct, 2014 FCC 47 CFR PART 24E: Oct, 2014 ANSI/TIA/EIA-603-C Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Fly Lu) (Testing Engineer) (Eric Ou Yang) Report Number: 1506FR22-01 3 of 70 A Test Lab Techno Corp. TABLE OF CONTENTS 1 General Information ....................................................................................................................................... 6 1.1. EUT Description ..................................................................................................................................... 6 1.2. Mode of Operation.................................................................................................................................. 7 1.3. EUT Exercise Software.......................................................................................................................... 7 1.4. Configuration of Test System Details ..................................................................................................... 7 1.5. Test Site Environment ............................................................................................................................ 8 1.6. Summary of Test Result ......................................................................................................................... 8 2 RF Output Power Test ................................................................................................................................... 9 2.1. Limit ........................................................................................................................................................ 9 2.2. Test Instruments ..................................................................................................................................... 9 2.3. Test Setup............................................................................................................................................... 9 2.4. Test Procedure ....................................................................................................................................... 9 2.5. Uncertainty ............................................................................................................................................. 9 2.6. Test Result............................................................................................................................................ 10 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test .................................................. 12 3.1. Limit ...................................................................................................................................................... 12 3.2. Test Instruments ................................................................................................................................... 12 3.3. Test Setup............................................................................................................................................. 12 3.4. Test Procedure ..................................................................................................................................... 12 3.5. Uncertainty ........................................................................................................................................... 12 3.6. Test Result............................................................................................................................................ 13 4 Peak to Average Ratio Test..............................…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Type ： LE910-NA V2 Applicant ： Telit Communications S.p.A. Address ： Viale Stazione di Prosecco 5/B, 34010 Sgonico- Trieste- Italy Trade Name ： Telit Model Number ： LE910-NA V2 Test Specification ： FCC 47 CFR PART 22H: Oct, 2014 FCC 47 CFR PART 24E: Oct, 2014 FCC 47 CFR PART 27: Oct. 2014 ANSI/TIA/EIA-603-C Application Purpose ： Original Receive Date ： Jun. 04, 2015 Test Period ： Jun. 11 ~ Aug. 03, 2015 Issue Date ： Aug. 04, 2015 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. Report Number: 1506FR21-01 1 of 293 A Test Lab Techno Corp. Revision History Rev. Issue Date Revisions Revised By 00 Jul. 28, 2015 Initial Issue 01 Aug. 04, 2015 Revised report information. Snow Wang Report Number: 1506FR21-01 2 of 293 A Test Lab Techno Corp. Verification of Compliance Issued Date: 08/04/2015 Product Type : LE910-NA V2 Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/B, 34010 Sgonico- Trieste- Italy Trade Name : Telit Model Number : LE910-NA V2 EUT Rated Voltage : DC 3.4V / 3.8V / 4.2V Test Voltage : DC 3.8V Applicable Standard : FCC 47 CFR PART 22H: Oct, 2014 FCC 47 CFR PART 24E: Oct, 2014 FCC 47 CFR PART 27: Oct. 2014 ANSI/TIA/EIA-603-C Test Result : Complied Application Purpose : Original Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI/TIA/EIA-603-C and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 27L. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Fly Lu) (Testing Engineer) (Eric Ou Yang) Report Number: 1506FR21-01 3 of 293 A Test Lab Techno Corp. TABLE OF CONTENTS 1 General Information ...................................................................................................................................... 6 1.1. EUT Description ..................................................................................................................................... 6 1.2. Mode of Operation.................................................................................................................................. 9 1.3. EUT Exercise Software........................................................................................................................ 16 1.4. Configuration of Test System Details ................................................................................................... 16 1.5. Test Site Environment .......................................................................................................................... 16 1.6. Summary of Test Result ....................................................................................................................... 17 2 Conducted Output Average Power Test ..................................................................................................... 18 2.1. Limit ...................................................................................................................................................... 18 2.2. Test Instruments ................................................................................................................................... 18 2.3. Test Setup............................................................................................................................................. 18 2.4. Test Procedure ...........................…

Text truncated - open the document above for the full version.