AX2JE50302G/3G Telematics Control Unit

Page 1/20 Clarion Confidential USER MANUAL TELEMATICS CONTROL UNIT JE-5030, JE-5031 Confidential and Proprietary Information of Clarion Co., Ltd. (C) 2014 Clarion Co., Ltd. All Rights Reserved. Ver 1.0 7 Mar 2014 Page 2/20 Clarion Confidential REVISION HISTORY Ver. Date Name Status 1.0 7 Mar 2014 M.Kanamori Initial Release Page 3/20 Clarion Confidential Contents 1.1 Overview ............................................................................................................................................................ 4 1.2 Acronyms ........................................................................................................................................................... 4 2.1 System Diagram ................................................................................................................................................ 5 2.2 General Description .......................................................................................................................................... 5 2.3 TCU Lineup ........................................................................................................................................................ 5 3.1 External View and Block Diagram ..................................................................................................................... 6 3.1.1 External Antenna Model (JE-5030) ............................................................................................................ 6 3.1.2 Internal Antenna Model (JE-5031) ............................................................................................................. 7 3.2 Connector........................................................................................................................................................... 8 3.2.1 Main Connector .......................................................................................................................................... 8 3.2.2 Cellular RF Connector (JE-5030) ............................................................................................................... 8 4.1 Evaluation Environment ........................................................................................................................................... 9 4.2 TCU Control Tool ................................................................................................................................................... 10 Page 4/20 Clarion Confidential 1. INTRODUCTION 1.1 Overview This document shows the user manual of the ‘TCU’. 1.2 Acronyms Acronym / Definition Description CL Clarion TCU Telematics Communication(Control) Unit CAN Controller Area Network Page 5/20 Clarion Confidential 2. SYSTEM OVERVIEW 2.1 System Diagram 2.2 General Description Item Spec Power Voltage Typ. 13.5V (9V~16V) Power Consumption (Max) 1000 mA Module Information Name: HE920-NA/EU Manufacturer: Telit Wireless Solutions Frequency Band UMTS / HSPA (WCDMA / FDD) 850/1700/1900 MHz(NA)850/900/2100(EU) GSM / GPRS / EDGE Quad-band 850/900/1800/1900 Data HSPA : Down: 14.4Mbps / Up: 5.76Mbps WCDMA : Down/Up: 384kbps EDGE : Down/Up: 236.8kbps GPRS : Down/Up: 85.6kbps Antenna Gain (Max) External Antenna (JE-5030): 0dBi Internal Antenna (JE-5031): 0dBi CAN ISO11898 Compliance / 500kbps Temperature Range -40°C to +85°C 2.3 TCU Lineup TCU has two models which are the external antenna model and the internal antenna model. The only different point is just only the antenna type. MODEL No. MODEM Antenna Type Destination JE-5030 HE920-NA External Antenna NA JE-5031 Internal Antenna CAN VBAT TCU GND BAT -+ Telematics Server UART Debug PC Page 6/20 Clarion Confidential 3. HARDWARE SPECIFICATION 3.1 External View and Block Diagram 3.1.1 External Antenna Model (JE-5030) (1) External View (2) Block Diagram Size: 155.0x76.3x38.0 [mm] Weight: under 200 [g] Main Connector Cellular RF Connector Page 7/20 Clarion Confidential 3.1.2 Internal Antenna Model (JE-5031) (1) External View (2) Block Diagram Main Connector Size: 155.0x76.3x38.0 [mm] Weight: under 200 [g] Page 8/20 Clarion Confidential 3.2 Connector 3.2.1 Main Connector The below figure shows the pin-out of main connector of TCU. Pin Number Signal Name I/O Remarks J1-1 VBATT - Vehicle Battery (+13.5V) J1-2 Reserved - J1-3 Reserved - J1-4 Reserved - J1-5 Reserved - J1-6 Reserved - J1-7 Reserved - J1-8 CAN (H) I/O J1-9 Reserved - J1-10 Reserved - J1-11 Reserved - J1-12 Reserved - J1-13 GND - Body Ground J1-14 Reserved - Reserved - J1-15 Reserved - J1-16 CAN (L) I/O J2-1 Reserved - J2-2 Reserved - J2-3 Reserved - J2-4 Reserved - J2-5 Reserved - J2-6 Reserved - J2-7 Reserved - J2-8 Reserved - J2-9 Reserved - J2-10 Reserved - J2-11 UART(Tx) O for Debug J2-12 UART(Rx) I for Debug 3.2.2 Cellular RF Connector (JE-5030) The following figure shows the cellular RF connector which is based on FAKRA-D. It is used only for the external antenna model (JE-5030). Page 9/20 Clarion Confidential 4. OPERATING CONNECTION FOR DEBUG 4.1 Evaluation Environment The following charts show the example of connection diagram for debugging. TCU can be powered up on the condition as descripted in the chapter 2.2 and debugged over the UART by using the external PC. The only different point between the external antenna model and the internal antenna model is the way to establish the RF connection. Test Request Response TCU DC Power 13.5V (9V~16V) + - Cellular Communication Tester Debug-PC Power source Debug (UART) Test Request Response DC Power 13.5V (9V~16V) + - Cellular Communication Tester Debug-PC Power source Debug (UART) TCU Cellular RF Connector Page 10/20 Clarion Confidential 4.2 TCU Control Tool TCU can be controlled by the dedicated application “TCU Control Tool”, which is the Windows application delivered by Clarion. 4.2.1 Operation Manual Here is the view of the TCU Control Tool as below. A B C D E F G H I N P QRST UVW Y JKL M O Page 11/20 Clarion Confidential Description of the…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Jan. 29, 2014 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name AX2JE5030 JE-5030 / JE-5031 For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description” The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Masahiko Shibata Company: Clarion Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Phone: +81-48-601-4121 Fax: +81-48-601-3802 Email: [email protected]

Mar. 18, 2014 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Declaration on Electrically Identical Models TO WHOM IT MAY CONCERN We, Clarion Co., Ltd declare on our sole responsibility that the new model JE-5031 with FCC ID: AX2JE5030 and IC: 419C-JE5030 is identical in hardware and software to the model JE-5030. The only differences between the two models are: - Model JE-5031 is equipped with an internal antenna. Model JE-5030 is equipped with a RF connector for an external antenna. - The appearance of the front cover differs slightly between the two models as shown in the submitted photos of these models. Radiated emissions have only been tested for model JE-5030. In addition a MPE calculation document, which is part of this TCF, has been created to calculate the maximum permitted antenna gain in order to comply with the regulations. Based on this, the submitted test reports are sufficient to show compliance of both models with the regulations. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Name: Masahiro Shibata Company: Clarion Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Phone: +81-48-601-4121 Fax: +81-48-601-3802 Email: [email protected]

Jan. 29, 2014 Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Declaration on the using of certified module(s) TO WHOM IT MAY CONCERN We, Clarion Co., Ltd., declare on our sole responsibility that our product JE-5030 and JE-5031 host the following module(s). HE920-NA with FCC ID: RI7HE920NA and IC ID: 5131A-HE920NA We attest that the each module and its antenna have been implemented in the host in such manner that our product fulfils the regulatory requirements. Further we attest that the test reports from the module, including annexes and sheets, remain applicable in full. We are aware that our products, which carry above module(s), are subject to 47CFR15B / ICES003. If you have any questions, please feel free to contact us at the address shown below Sincerely, Name: Masahiko Shibata Company: Clarion Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Phone: +81-48-601-4121 Fax: +81-48-601-3802 Email: [email protected]

SHORT-TERM CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 March 18, 2014 TO WHOM IT MAY CONCERN Pursuant to the recent upgrade to the Office of Engineering and Technology’s (OET) Equipment Authorization System on 6/15/04 (ref. DA 04 –1705), Clarion Co., Ltd. requests temporarily confidentiality for the following product: FCC ID Number Product Title/Model AX2JE5030 JE-5030 / JE-5031 For the product stated above, we request that the following information be held confidential: 1. External and Internal Photographs 2. Test Setup Photos 3. User Manual We request this confidentiality on the basis of ensuring that business sensitive information remains confidential for 180 days or the marketing date of the device, whichever is sooner. If the marketing date should be before the expiration of the 180 days, we will inform the TCB about the marketing date in order to lift the short-term confidentiality on the day of the marketing. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Masahiko Shibata Company: Clarion Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Phone: +81-48-601-4121 Fax: +81-48-601-3802 Email: [email protected]

Page 1/2 Clarion Confidential External Photos of TCU (Telematics Control Unit) Side External Antenna Model JE-5030 Internal Antenna Model JE-5031 Top Bottom Front Page 2/2 Clarion Confidential Back Left Right Note: Refer to the ‘Label and Label Location Info’ regarding the content of label in the above pictures.

Page 1/2 Clarion Confidential Label and Label location Information (1) JE5-030 LABEL Drawing LABEL LOCATION LABEL Page 2/2 Clarion Confidential (2) JE-5031 LABEL Drawing LABEL LOCATION LABEL

Photos and Assemblies: HE920-NA • Photo : Top PCB assembly and Top PCB layer • Photo : Bottom PCB layer

Page 1/4 Clarion Confidential Internal Photos of TCU (Telematics Control Unit) Part External Antenna Model JE-5030 Internal Antenna Model JE-5031 Detail Upper Case (Top) Upper Case (Bottom) Page 2/4 Clarion Confidential Upper Case (Front) Upper Case (Back) Upper Case (Left) Upper Case (Right) Board (Component side) Page 3/4 Clarion Confidential Board (Solder side) Lower Case (Top) Lower Case (Bottom) Lower Case (Front) Page 4/4 Clarion Confidential Lower Case (Back) Lower Case (Left) Lower Case (Right) Note: Refer to the ‘Label and Label Location Info’ regarding the content of label in the above pictures.

2014-03-24 Page 1 of 4 Prediction of MPE and ERP/ EIRP The device is designed as module to be installed in other devices. This device is to be used only for fixed and mobile applications. If the final product after integration is intended for portable use, a new application and FCC is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The table below is excerpted from Table 1B of 47 CFR 1.1310 titled Limits for Maximum Permissible Exposure (MPE) and Health Canada Safety Code 6, Limits for General Population/Uncontrolled Exposure: Frequency Range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) 300 – 1500 f (MHz) /1500 30 1500 – 100.000 1.0 30 Based on the above table the limits are: For 850 MHz frequency band device: 0.55 mW/cm2 For 1700 /1900 MHz frequency band device: 1 mW/cm2 FCC § 2.1091 / IC RSS102, section 2.5.2 The limit for 850 MHz mobile operations where no routine evaluation is required is: 1.5W ERP The limit for 1700 / 1900 MHz mobile operations where no routine evaluation is required is: 3W EIRP Max permissive power according to §24.232 and RSS133: 2W EIRP Max permissive power according to §§22.913(a) and RSS132: 7W ERP Using the equation from page 19 of OET Bulletin 65, Edition 97-01: where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) 2 4R PG S   Project.: 1-5825/46-02 2014-03-24 Page 2 of 4 850 MHz frequency band Maximum output power considerations: Mode Maximum conducted output power (dBm) Maximum conducted output power (W) Duty cycle Equivalent conducted output power (Maximum conducted output power x duty cycle) (mW) GSM 33.5 2.239 26% 582 EDGE 27.5 0.562 26% 146 WCDMA 24.2 0.263 100% 263 P Maximum power input to the antenna: 582 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 0.55 mW/cm 2 G 1 Antenna gain (dBi) to comply with MPE limits: 6.77 dBi ERP power limit according to §2.1091: 1.50 W ERP G 2 Antenna gain (dBi) to comply with ERP limits: 6.25 dBi (ERP = Maximum conducted output power x Antenna gain / 1,64) ERP power limit according to §22.913: 7.00 W ERP G 3 Antenna gain (dBi) to comply with ERP limits: 7.09 dBi (ERP = Maximum conducted output power x Antenna gain / 1,64) G 850 MHz band Min (G 1 , G 2, G 3 ) 7.09 dBi Therefore the maximum antenna gain for mobile operation to comply with MPE and ERP limits shall not exceed: 4.95 dBd Project.: 1-5825/46-02 2014-03-24 Page 3 of 4 1900 MHz frequency band Maximum output power considerations: Mode Maximum conducted output power (dBm) Maximum conducted output power (W) Duty cycle Equivalent conducted output power (Maximum conducted output power x duty cycle) (mW) GPRS 30 1.000 26% 260 EDGE 25.5 0.355 26% 92 WCDMA 24 0.251 100% 251 P Maximum power input to the antenna: 260 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 1.00 mW/cm 2 G 1 Antenna gain (dBi) to comply with MPE limits: 12.86 dBi EIRP power limit according to §2.1091: 3.00 W EIRP G 2 Antenna gain (dBi) to comply with EIRP limits: 12.76 dBi (EIRP = Maximum conducted output power x Antenna gain ) EIRP power limit according to §24.232 2.00 W EIRP G 3 Antenna gain (dBi) to comply with EIRP limits: 3.01 dBi (EIRP = Maximum conducted output power x Antenna gain ) G 1900 MHz band Min (G 1 , G 2, G 3 ) 3.01 dBi Therefore the maximum antenna gain for mobile operation to comply with MPE and EIRP limits shall not exceed: 3.01 dBi Project.: 1-5825/46-02 2014-03-24 Page 4 of 4 1700 MHz frequency band 1700 MHz frequency band Maximum output power considerations: Mode Maximum conducted output power (dBm) Maximum conducted output power (W) Duty cycle Equivalent conducted output power (Maximum conducted output power x duty cycle) (mW) WCDMA 24.2 0.263 100% 263 P Maximum power input to the antenna: 263 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 1.00 mW/cm 2 G 1 Antenna gain (dBi) to comply with MPE limits: 12.81 dBi EIRP power limit according to §2.1091: 3.00 W EIRP G 2 Antenna gain (dBi) to comply with EIRP limits: 12.71 dBi (EIRP = Maximum conducted output power x Antenna gain ) EIRP power limit according to §27.50 2.00 W ERP G 3 Antenna gain (dBi) to comply with EIRP limits: 8.81 dBi (EIRP = Maximum conducted output power x Antenna gain ) G 1900 MHz band Min (G 1 , G 2, G 3 ) 8.81 dBi Therefore the maximum antenna gain for mobile operation to comply with MPE and EIRP limits shall not exceed: 8.81 dBi p.o. David Lang Testing Manager

A Test Lab Techno Corp. Report Number: 1211FR17-01 1 of 108 FCC 47 CFR PART 22H and 24E Test Report Product Type ： Wireless module Applicant ： Telit Communications S.p.A. Address ： Viale Stazione di Prosecco 5/b, Trieste, 34010, Italy Trade Name ： Telit Model Number ： HE920-NA Test Specification ： FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 CANADA RSS-132 ISSUE 3: Jan., 2013 CANADA RSS-133 ISSUE 6: Jan., 2013 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Application Purpose ： Original Receive Date ： Nov. 12, 2012 Test Period ： Nov. 20, 2012 ~ Mar. 13, 2013 Issue Date ： Apr. 09, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1211FR17-01 2 of 108 Revision History Rev. Issue Date Revisions Revised By 00 Mar. 18, 2013Initial Issue 01 Apr. 09, 2013 Revised IC number. Joyce Liao A Test Lab Techno Corp. Report Number: 1211FR17-01 3 of 108 Verification of Compliance Issued Date: 04/09/2013 Product Type : Wireless module Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste, 34010, Italy Trade Name : Telit Model Number : HE920-NA FCC ID : RI7HE920NA IC : 5131A-HE920NA EUT Rated Voltage : DC 3.8V Test Voltage : DC 3.8V Applicable Standard : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 CANADA RSS-132 ISSUE 3: Jan. 2013 CANADA RSS-133 ISSUE 6: Jan. 2013 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) TABLE OF CONTENTS 1 General Information ....................................................................................................................................... 6 1.1. EUT Description ..................................................................................................................................... 6 1.2. Mode of Operation.................................................................................................................................. 7 1.3. EUT Exercise Software.......................................................................................................................... 7 1.4. Configuration of Test System Details ..................................................................................................... 7 1.5. Test Site Environment ............................................................................................................................ 8 1.6. Summary of Test Result ......................................................................................................................... 8 2 RF Output Power Test ................................................................................................................................... 9 2.1. Limit ........................................................................................................................................................ 9 2.2. Test Instruments ..................................................................................................................................... 9 2.3. Test Setup............................................................................................................................................... 9 2.4. Test Procedure ....................................................................................................................................... 9 2.5. Uncertainty ............................................................................................................................................. 9 2.6. Test Result............................................................................................................................................ 10 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test .................................................. 14 3.1. Limit ...................................................................................................................................................... 14 3.2. Test Instruments ................................................................................................................................... 14 3.3. Setup .................................................................................................................................................... 14 3.4. Test Procedure ..................................................................................................................................... 16 3.5. Uncertainty ..........................................................................................................................................…

Text truncated - open the document above for the full version.

A Test Lab Techno Corp. Report Number: 1211FR15-01 1 of 45 FCC 47 CFR PART 27 Test Report Product Type ： Wireless module Applicant ： Telit Communications S.p.A. Address ： Viale Stazione di Prosecco 5/b, Trieste, 34010, Italy Trade Name ： Telit Model Number ： HE920-NA Test Specification ： FCC 47 CFR PART 27 SUBPART L: Oct. 2012 RSS-139 Issue 2, February 2009 RSS-Gen Issue 3, December 2010 ANSI/TIA-603-C-2004 Application Purpose ： Original Receive Date ： Nov. 12, 2012 Test Period ： Nov. 20, 2012 ~ Feb. 07, 2013 Issue Date ： Apr. 09, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1211FR15-01 2 of 45 Revision History Rev. Issue Date Revisions Revised By 00 Mar. 18, 2013Initial Issue 01 Apr. 09, 2013 Revised IC number. Joyce Liao A Test Lab Techno Corp. Report Number: 1211FR15-01 3 of 45 Verification of Compliance Issued Date: 04/09/2013 Product Type : Wireless module Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste, 34010, Italy Trade Name : Telit Model Number : HE920-NA FCC ID : RI7HE920NA IC : 5131A-HE920NA EUT Rated Voltage : DC 3.8V Test Voltage : DC 3.8V Applicable Standard : FCC 47 CFR PART 27 SUBPART L: Oct. 2012 CANADA RSS-139 Issue 2, February 2009 CANADA RSS-Gen Issue 3, December 2010 ANSI/TIA-603-C-2004 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) TABLE OF CONTENTS 1 General Information ....................................................................................................................................... 6 1.1. EUT Description ..................................................................................................................................... 6 1.2. Mode of Operation.................................................................................................................................. 6 1.3. EUT Exercise Software.......................................................................................................................... 7 1.4. Configuration of Test System Details ..................................................................................................... 7 1.5. Test Site Environment ............................................................................................................................ 7 1.6. Summary of Test Result ......................................................................................................................... 8 2 RF Output Power Test ................................................................................................................................... 9 2.1. Limit ........................................................................................................................................................ 9 2.2. Test Instruments ..................................................................................................................................... 9 2.3. Test Setup............................................................................................................................................... 9 2.4. Test Procedure ..................................................................................................................................... 10 2.5. Uncertainty ........................................................................................................................................... 10 2.6. Test Result.............................................................................................................................................11 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test .................................................. 12 3.1. Limit ...................................................................................................................................................... 12 3.2. Test Instruments ................................................................................................................................... 12 3.3. Test Setup............................................................................................................................................. 12 3.4. Test Procedure ..................................................................................................................................... 14 3.5. Uncertainty ........................................................................................................................................... 14 3.6. Test Result..............................................................................................................…

Text truncated - open the document above for the full version.

2014-03-24 Page 1 of 43 TEST REPORT Test report no.: 1-5825/13-46-02-B Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area …

Text truncated - open the document above for the full version.