BPO-DOPO-M100110.1" Internet Tablet

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 21.06.07 Datum: 00.00.00 Seite 1 von 1 D a t e: 2012-09-14 Subject: Ad Hoc Mode Function Declaration FCC ID: BPO-DOPO-M1001 To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Yours sincerely, Signatory Signature Name Yang Ming Title General Manager Bright Win Technology Co., Ltd. Bright Win Technology Co., Ltd.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 07.03.2008 Datum: 00.00.00 Seite 1 von 1 PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date:2012-09-14 FCC ID: BPO-DOPO-M1001 Subject: Attestation Letter “Declaration of Conformity” Dear Sirs, Our products with the above FCC ID are defined as composite device. The transmitter is authorized under the “Certification” procedure. The device is also defined as “PC Periphery” acc to §15.101 Equipment authorization of unintentional radiators, where we hereby declare, that we apply and follow the “Declaration of Conformity” procedure. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Signature Name Yang Ming Title General Manager Bright Win Technology Co., Ltd. Bright Win Technology Co., Ltd.

Bright Win Technology Co., Ltd. PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 24.09.2012 Authority to Act as an Agent We declare that the following representative (agent) Name Mark Wen Position General Manager Company Name Most Technology Service Co., Ltd. Address No.5, 2 nd Langshan Road, North District, Hi-Tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel / Fax 86 -755 -86170306/86-755 -86170310 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name 10.1 “ Internet Tablet Model Name TD -1010, M1001 Brand Name DOPO We also authorize BZT – TCP Certification GmbH, Ms.Wanida Patthanavoj (address: Hermann - Loens - Weg 6, 15859 Storkow b. Berlin Germany) to process the application. Yours sincerely, Signatory Name Ming Yang Position General Manager Company Name Bright Win Technology Co., Ltd. Address Huafeng Technology Building, Bao’An, Shenzhen, China Tel / Fax (852) 30658116 E-Mail [email protected] In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 21.06.07 Datum: 00.00.00 Seite 1 von 1 D a t e: 2012-09-14 Subject: Ad Hoc Mode Function Declaration FCC ID: BPO-DOPO-M1001 To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Yours sincerely, Signatory Signature Name Yang Ming Title General Manager Bright Win Technology Co., Ltd. Bright Win Technology Co., Ltd.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 07.03.2008 Datum: 00.00.00 Seite 1 von 1 PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date:2012-09-14 FCC ID: BPO-DOPO-M1001 Subject: Attestation Letter “Declaration of Conformity” Dear Sirs, Our products with the above FCC ID are defined as composite device. The transmitter is authorized under the “Certification” procedure. The device is also defined as “PC Periphery” acc to §15.101 Equipment authorization of unintentional radiators, where we hereby declare, that we apply and follow the “Declaration of Conformity” procedure. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Signature Name Yang Ming Title General Manager Bright Win Technology Co., Ltd. Bright Win Technology Co., Ltd.

Bright Win Technology Co., Ltd. PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 24.09.2012 Authority to Act as an Agent We declare that the following representative (agent) Name Mark Wen Position General Manager Company Name Most Technology Service Co., Ltd. Address No.5, 2 nd Langshan Road, North District, Hi-Tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel / Fax 86 -755 -86170306/86-755 -86170310 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name 10.1 “ Internet Tablet Model Name TD -1010, M1001 Brand Name DOPO We also authorize BZT – TCP Certification GmbH, Ms.Wanida Patthanavoj (address: Hermann - Loens - Weg 6, 15859 Storkow b. Berlin Germany) to process the application. Yours sincerely, Signatory Name Ming Yang Position General Manager Company Name Bright Win Technology Co., Ltd. Address Huafeng Technology Building, Bao’An, Shenzhen, China Tel / Fax (852) 30658116 E-Mail [email protected] In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Page 1 of 4 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Page 2 of 4 UP VIEW OF SAMPLE DOWN VIEW OF SAMPLE Page 3 of 4 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Page 4 of 4 PHOTO OF POWER SUPPLY-1 PHOTO OF POWER SUPPLY-2

Page 1 of 4 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Page 2 of 4 UP VIEW OF SAMPLE DOWN VIEW OF SAMPLE Page 3 of 4 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Page 4 of 4 PHOTO OF POWER SUPPLY-1 PHOTO OF POWER SUPPLY-2

Double Power 10.1"Internet Tablet Model No:TD-1010 Made in China FCC ID:BPO-DOPO-M1001 INPUT:DC 5.5V/2.5A This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

Page 1 of 9 INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 Page 2 of 9 INTERNAL PHOTO OF SAMPLE – 3 INTERNAL PHOTO OF SAMPLE – 4 Page 3 of 9 INTERNAL PHOTO OF SAMPLE – 5 INTERNAL PHOTO OF SAMPLE – 6 Page 4 of 9 INTERNAL PHOTO OF SAMPLE – 7 INTERNAL PHOTO OF SAMPLE – 8 Page 5 of 9 INTERNAL PHOTO OF SAMPLE –9 INTERNAL PHOTO OF SAMPLE – 10 Page 6 of 9 INTERNAL PHOTO OF SAMPLE – 11 INTERNAL PHOTO OF SAMPLE – 12 Page 7 of 9 INTERNAL PHOTO OF SAMPLE – 13 INTERNAL PHOTO OF SAMPLE – 14 Page 8 of 9 INTERNAL PHOTO OF POWER SUPPLY - 1 INTERNAL PHOTO OF POWER SUPPLY - 2 Page 9 of 9 INTERNAL PHOTO OF POWER SUPPLY - 3

Page 1 of 9 INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 Page 2 of 9 INTERNAL PHOTO OF SAMPLE – 3 INTERNAL PHOTO OF SAMPLE – 4 Page 3 of 9 INTERNAL PHOTO OF SAMPLE – 5 INTERNAL PHOTO OF SAMPLE – 6 Page 4 of 9 INTERNAL PHOTO OF SAMPLE – 7 INTERNAL PHOTO OF SAMPLE – 8 Page 5 of 9 INTERNAL PHOTO OF SAMPLE –9 INTERNAL PHOTO OF SAMPLE – 10 Page 6 of 9 INTERNAL PHOTO OF SAMPLE – 11 INTERNAL PHOTO OF SAMPLE – 12 Page 7 of 9 INTERNAL PHOTO OF SAMPLE – 13 INTERNAL PHOTO OF SAMPLE – 14 Page 8 of 9 INTERNAL PHOTO OF POWER SUPPLY - 1 INTERNAL PHOTO OF POWER SUPPLY - 2 Page 9 of 9 INTERNAL PHOTO OF POWER SUPPLY - 3

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant: Bright Win Technology Co., Ltd. Address: Huafeng Technology Building, Bao’An, Shenzhen, China Product Name: 10.1” Internet Tablet Model Name: TD-1010, M1001 Brand Name: DOPO FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Date of Issue: Sep. 15, 2012 Issued by : Most Technology Service Co., Ltd. Address : No.5, Langshan 2nd Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Page 2 of 44 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY..........................................................................................4 2. GENERAL INFORMATION.......................................................................................................5 2.1 Product Information................................................................................................................5 2.2 Objective................................................................................................................................6 2.3 Test Standards and Results....................................................................................................6 2.4 Environmental Conditions.......................................................................................................6 2.5 MEASUREMENT UNCERTAINTY.........................................................................................6 3. TEST FACILITY........................................................................................................................7 3.1TEST FACILITY.......................................................................................................................7 3.2 Test Conditions.......................................................................................................................7 3.3 Channel List...........................................................................................................................8 3.4 Description of Test Modes......................................................................................................8 3.5 Table of Parameters of Text Software Setting.........................................................................9 3.6 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.............................................10 4. SETUP OF EQUIPMENT UNDER TEST.................................................................................11 4.1 SUPPORT EQUIPMENT.......................................................................................................11 4.2 TEST EQUIPMENT LIST......................................................................................................12 5. 47 CFR Part 15C 15.249 Requirements.................................................................................13 5.1 Spurious Emission Test........................................................................................................13 5.1.1 Requirement......................................................................................................................13 5.1.2 Test Description.................................................................................................................14 5.1.3 Test Description.................................................................................................................15 5.1.5 Test Result.....................................................................................................................16 5.2 Band Edge............................................................................................................................28 5.2.1 Requirement......................................................................................................................28 5.2.2 Test Description.................................................................................................................28 5.2.3Test Result..........................................................................................................................28 5.3 LINE CONDUCTED EMISSION TEST.................................................................................34 5.3.1. LIMITS OF LINE CONDUCTED EMISSION TEST...........................................................34 5.3.2. BLOCK DIAGRAM OF TEST SETUP...............................................................................34 5.3.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST......................35 5.3.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST....................................35 5.3.5. Test result.........................................................................................................................35 5.3.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST..............................................36 FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Page 3 of 44 5.4 20 dB Bandwidth..................................................................................................................38 5.4.1 Definition...........................................................................................................................38 5.4.2 Block Diagram Of Test Setup............................................................................................38 5.4.3 Test Result.........................................................................................................................38 APPENDIX 1...............…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant: Bright Win Technology Co., Ltd. Address: Huafeng Technology Building, Bao’An, Shenzhen, China Product Name: 10.1” Internet Tablet Model Name: TD-1010, M1001 Brand Name: DOPO FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Date of Issue: Sep. 15, 2012 Issued by : Most Technology Service Co., Ltd. Address : No.5, Langshan 2nd Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Page 2 of 44 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY..........................................................................................4 2. GENERAL INFORMATION.......................................................................................................5 2.1 Product Information................................................................................................................5 2.2 Objective................................................................................................................................6 2.3 Test Standards and Results....................................................................................................6 2.4 Environmental Conditions.......................................................................................................6 2.5 MEASUREMENT UNCERTAINTY.........................................................................................6 3. TEST FACILITY........................................................................................................................7 3.1TEST FACILITY.......................................................................................................................7 3.2 Test Conditions.......................................................................................................................7 3.3 Channel List...........................................................................................................................8 3.4 Description of Test Modes......................................................................................................8 3.5 Table of Parameters of Text Software Setting.........................................................................9 3.6 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.............................................10 4. SETUP OF EQUIPMENT UNDER TEST.................................................................................11 4.1 SUPPORT EQUIPMENT.......................................................................................................11 4.2 TEST EQUIPMENT LIST......................................................................................................12 5. 47 CFR Part 15C 15.249 Requirements.................................................................................13 5.1 Spurious Emission Test........................................................................................................13 5.1.1 Requirement......................................................................................................................13 5.1.2 Test Description.................................................................................................................14 5.1.3 Test Description.................................................................................................................15 5.1.5 Test Result.....................................................................................................................16 5.2 Band Edge............................................................................................................................28 5.2.1 Requirement......................................................................................................................28 5.2.2 Test Description.................................................................................................................28 5.2.3Test Result..........................................................................................................................28 5.3 LINE CONDUCTED EMISSION TEST.................................................................................34 5.3.1. LIMITS OF LINE CONDUCTED EMISSION TEST...........................................................34 5.3.2. BLOCK DIAGRAM OF TEST SETUP...............................................................................34 5.3.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST......................35 5.3.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST....................................35 5.3.5. Test result.........................................................................................................................35 5.3.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST..............................................36 FCC ID: BPO-DOPO-M1001 Report No.: MTE/AYG/D12091237 Page 3 of 44 5.4 20 dB Bandwidth..................................................................................................................38 5.4.1 Definition...........................................................................................................................38 5.4.2 Block Diagram Of Test Setup............................................................................................38 5.4.3 Test Result.........................................................................................................................38 APPENDIX 1...............…

Text truncated - open the document above for the full version.

Page 1 of 2 CE TEST RE TEST Page 2 of 2 CONDUCTED TEST SETUP ----END OF REPORT----

Page 1 of 2 CE TEST RE TEST Page 2 of 2 CONDUCTED TEST SETUP ----END OF REPORT----