C9O-PDMB2Pedal Sensor with BLE, and AIREA Radios

95-3018-022-000 Rev B © 2019 SRAM, LLC Electronic Regulatory Compliance Manual 2 Electronic Regulatory Compliance Manual 3 Konformitätserklärung für elektronische Geräte 4 Manual de cumplimiento de la normativa electrónica 5 Manuel sur le respect des règlements concernant l'électronique 6 Manuale di Conformità Normativa Elettronica 7 Handleiding over de regelnaleving voor elektronische apparatuur 8 Manual de Conformidade com os Regulamentos de Electrónica 9 電子関連規制コンプライアンス・マニュアル 10 电子监管合规手册 11 Elektroniczny podręcznik zgodności z przepisami 12 Vedledning vedr. overholdelse af regulativer for elektronik 13 Příručka shody se zák onnými nařízeními pro elektroniku 14 Manual de conformare reglementări echipamente electronicei 15 Εγχειρίδιο ρυθμιστικής συμμόρφωσης σχετικ ά με τα ηλεκτρονικά 16 전자규정 준수를 위한 안내 17 電子監管合規手冊 18 Рук оводство по соответствию нормативным требованиям электронного устройства 2 Complies with ID A Standards D A107248 HIDF16000136 HIDF16000136 Electronic Regulatory Compliance Manual SRAM LLC certifies that this product and its packaging are in compliance with: RE Directive, the Radio Equipment Directive 2014/53/EC WEEE Directive, the Waste Electrical and Electronic Equipment Directive 2012/19/EU RoHS Directive, the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/EC REACh Directive, the Regulation on Registration, Evaluation, Authorization and Restriction of Chemical Directive 1907/2006/EC Batteries and Accumulators and Waste Batteries and Accumulators Directive 2006/66/EU This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC”: before the radio certification number only signifies that Industry Canada technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Radiation Exposure Statement: Models 00010, 00110, 00210, 12810, 12910, 13200, 00220, 12920, 13000, 13100, and 00500 have been tested and complies with FCC and IC RSS 102 RF radiation exposure limits set forth for an uncontrolled environment when used with SRAM accessories supplied or designated for this product. To satisfy IC exposure requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and persons during device operation. The use of any other accessories may not ensure compliance with IC RSS 102 RF exposure guidelines. Declaration d'exposition aux radiations: Les modèles 00010, 00110, 00210, 12810, 12910, 13200, 00220, 12920, 13000, 13100, et 00500 ont été testés conformemment aux normes d'exposition d'emission RF de la FCC et IC RSS 102 pour un environement non controle lors d'utilisation avec les accessoires fournis or recommendes par SRAM. Pour satisfaire aux exigences d'exposition IC, une distance de separation d'au moins 20 cm doit etre maintenue entre l'antenne de cet appareil et des personnes pendant le fonctionnement de l'appareil. L'utilisation d'accessoires autres que ceux recommendes par SRAM ne guarantis pas la compatibilite avec les normes d'emission RF de la IC RSS 102. Warning: Any changes or modifications not expressively approved by SRAM could void the user's authority to operate this equipment. This product is ANT+ certified and complies with the bicycle power ANT+ Device Profile. For a complete listing of ANT+ Certified Products and their specific interoperability, please visit www.thisisant.com. 3 Complies with ID A Standards D A107248 HIDF16000136 HIDF16000136 Electronic Regulatory Compliance Manual Model #FCC IDIC ID TRA Dealer No: DA51171/16 ISRAEL מספר אישור אלחוטי של משרד התקשורת אסור להחליף את האנטנה המקורית של המכשיר ולא לעשות בו כל שינוי טכני אחר Left Shifter00010C90-LSBB110161A-LSBB1ER648161/1855-00222 Right Shifter00110C90-RSBB110161A-RSBB1ER64862/1855-00223 BlipBox00210C90-BOXB110161A-BOXB1ER64863/1855-00224 Front Derailleur12810C90-FDB110161A-FDB1ER64864/1855-00225 Rear Derailleur12910C90-RDB110161A-RDB1ER64865/1855-00226 Seatpost13200C90-SPMB110161A-SPMB151-67177 Electronic Controller 00220C90-SLMB119161A-SLMB1ER67897/1851-67174 Rear Derailleur 1…

Text truncated - open the document above for the full version.

USER MANUAL XX-XXXX-XXX-XXX Rev A © 2020 SRAM, LLC Electronic Suspension User Manual Manual do Utilizador do Electronic Suspension Electronic Suspension ユーザー・マニ ュアル Manual de usuario de Electronic Suspension Electronic Suspension 사용자 설명서Electronic Suspension 用户手册 2 SAFETY INSTRUCTIONS You must read and understand the Safety Instructions document included with your product before proceeding with installation. Improperly installed components are extremely dangerous and could result in severe and/or fatal injuries. If you have any questions about the installation of these components, consult a qualified bicycle mechanic. This document is also available on www.sram.com. INSTRUÇÕES DE SEGURANÇA Tem que ler e compreender o documento de Instruções de Segurança, incluído com o seu produto, antes de proceder com a instalação. Os componentes instalados de forma incorrecta são extremamente perigosos e poderão resultar em lesões graves e/ou fatais. Se tiver quaisquer perguntas sobre a instalação destes componentes, consulte um mecânico de bicicletas qualificado. Este documento também está disponível em www.sram.com. 安全にお使いいただくために 取り付けを開始する前に、製品に付 属している安全に関する記述を必ず 読み、内容を理解してください。コ ンポーネントを間違って取り付ける と、非常に危険な状態になり、その 結果、重度または致命的な障害を引 き起こすことがあります。これらの コンポーネントの取り付けに関して 質問がある場合は、正規の自転車整 備士にご相談ください。このマニュ アルは www.sram.com にも掲載され ています。 INSTRUCCIONES DE SEGURIDAD Antes de proceder a la instalación de este producto, es necesario que lea y entienda perfectamente el documento de instrucciones de seguridad que lo acompaña. Unos componentes mal instalados suponen un enorme peligro y pueden ocasionar lesiones graves o incluso mortales. Si tiene alguna pregunta acerca de la instalación de estos componentes, consulte con un mecánico de bicicletas cualificado. Este documento está disponible también en la dirección www.sram.com. 안전 지침 설치를 진행하기 전에 제품과 함께 들어 있는 안전 지침 문서를 읽고 이해해야 합니다. 부적절하게 설치된 구성품은 매우 위험하며 심한 그리고/또는 치명적인 부상을 초래할 수 있습니다. 구성품 설치에 관하여 궁금한 사항이 있는 경우 전문 자전거 정비사에게 문의하시기 바랍니다. 이 문서는 www.sram.com에서도 찾아볼 수 있습니다. 安全说明 进行安装之前，您必须阅读并理解产 品随附的安全说明书。部件安装不当 是极为危险的，可能导致严重甚至致 命的人身伤害。如果您对部件安装有 任何疑问，请咨询专业自行车技工。 本文件也发布在 www.sram.com 上。 3 NOTICE This manual is a complete system identification and usage guide for an installed Electronic Suspension electronic suspension system on an assembled bicycle. For details regarding RockShox suspension component installation and tuning, consult the RockShox Front Suspension and RockShox Rear Suspension User Manuals, and the RockShox Suspension Tuning Guide. AXS components are only compatible with other AXS components. Consult the Compatibility Map AXS Components for compatibility information. Consult www.sram.com/service whenever a separate manual is referenced in this document. NOTIFICAÇÃO Este manual é um sistema completo de identificação e um guia de utilização para um sistema de suspensão electrónico Electronic Suspension instalado numa bicicleta completamente montada. Para obter detalhes acerca da instalação e afinação de componentes da suspensão RockShox, consulte os Manuais do Utilizador da Suspensão da Frente RockShox e da Suspensão Traseira RockShox e o Guia de Afinação da Suspensão RockShox. Os componentes AXS só são compatíveis com outros componentes AXS. Consulte o Compatibility Map AXS Components para obter informações de compatibilidade. Consulte www.sram.com/service sempre que um outro manual diferente seja mencionado como referência neste documento. 注意事項 このマニュアルは、組み立て済みの 自転車に取り付けられたElectronic Suspension 電子サスペンション・システ ムに関する完全なシステム解説と使用方 法についてのガイドです。 RockShox サスペンションのコンポーネ ントの取り付けとチューニングについて の詳細は、 RockShox フロント・サスペ ンション・ユーザー・マニュアルおよび RockShoxリア・サスペンション・ユー ザー・マニュアルのほか、RockShox サス ペンション・チューニング・ガイドを参 照してください。 AXS のコンポーネントは、他の AXS コ ン ポーネントにのみ適合しています。適 合 性 に 関 す る 情 報 は、Compatibility Map AXS Components 参照してくだい。 このマニュアルで参照することが案内 されている別のマニュアルについては、 www.sram.com/service でご覧いただけ ます。 AVISO Este manual es una guía completa de identificación y uso de un sistema de suspensión electrónica Electronic Suspension instalado en una bicicleta ya montada. Para obtener detalles sobre la instalación y ajuste de los componentes de suspensión RockShox, consulte el Manual de usuario de la suspensión delantera RockShox, el Manual de usuario de la suspensión trasera RockShox y la Guía de ajuste de la suspensión RockShox. Los componentes AXS solo son compatibles con otros componentes AXS. Consulte el Compatibility Map AXS Components para obtener información de compatibilidad. Consulte www.sram.com/service siempre que en este documento se haga referencia a otro manual. 주의 이 설명서는 조립된 자전거에 설치된 Electronic Suspension 전자식 서스펜션 시스템의 각 부위 및 사용법에 대한 가이드입니다. RockShox 서스펜션 구성품 설치 및 튜닝에 관한 자세한 내용은 RockShox Front Suspension 및 RockShox Rear Suspension User Manuals 및 RockShox Suspension Tuning Guide를 참조하시기 바랍니다. AXS 구성품은 다른 AXS 구성품과만 호환됩니다. 호환성에 대한 정보는 Compatibility Map AXS Components를 참조하십시오. 본 문서에서 별도의 설명서가 언급될 때는 www.sram.com/service를 참조하십시오. 注意 本手册是在已装配的自行车上安装的 Electronic Suspension 电子减震系统的 完整系统辨识和使用指南。 如需详细了解 RockShox 减震部件的安装 与微调，请参阅《RockShox 前减震器用 户手册》、《RockShox 后减震器用户手册》 和《RockShox 减震器微调指南》。 AXS 部件只与其它 AXS 部件相兼容。兼容 方面的信息请参阅《Compatibility Map AXS Components》。 若本手册中提及其它手册，请访问 www.sram.com/service 进行相应查阅。 4 Tools and Supplies 6 Herramientas y accesorios Ferramentas e Produtos a Usar 설치 도구 ールおよび付属品 工具和用品 SRAM AXS App 7 Aplicación SRAM AXS App AXS da SRAM SRAM AXS 앱 SRAM AXS アプリ SRAM AXS 应用程序 System Components 8 Componentes del sistema Componentes do sistema 시스템 구성품 システムのコンポーネント 系统部件 SRAM Battery and Charger 8 Batería y cargador SRAM Bateria e carregador da SRAM SRAM 배터리와 충전기 SRAM の電池と充電器 SRAM 电池和充电器 RockShox AXS Controller - 2 Paddle 9 Controlador RockShox AXS - 2 paletas Controlador AXS da RockShox - 2 manípulos achatados RockShox AXS 컨트롤러 - 2 패들 RockShox AXS コントローラー - 2 パドル RockShox AXS 控制器 - 双叶片 RockShox AXS Controller - 1 Paddle 10 Controlador RockShox AXS - 1 paleta Controlador AXS da RockShox - 1 Manípulo achatado RockShox AXS 컨트롤러 - 1 패들 RockShox AXSコントローラー - 1パドル RockShox AXS 控制器 - 单叶片 Electronic Suspensi…

Text truncated - open the document above for the full version.

Date: March 4, 2020 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Leo Yermakov SRAM LLC REMARK: 1. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.

Date: 3/18/2020 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC IDs: Front Suspension 13000 C9O-FSMB2 Rear Shock 13100 C9O-RSMB1 Pedal Sensor 00500 C9O-PDMB2 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180 days from date of the Grant of Equipment Authorization. External Photos Internal Photos Set-up Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Best Regards Leo Yermakov Regulatory Compliance Manager SRAM LLC March 18, 2020

A B C D E F G 12345678910 12345678910 A B C D E F G DESCRIPTION PART NUMBER 66-3018-122-010DECAL AXS PEDAL SENSOR CERTS GRY/DFB DRAWING NUMBERREVISION DRAWING NAME/DESCRIPTION CONFIDENTIAL - THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO SRAM CORPORATION AND MAY NOT BE DISCLOSED WITHOUT PERMISSION. FORMAT: A3SHEET: 1/1 ALL DIMENSIONS ARE mm UNSPECIFIED LENGTH TOLERANCE X.X +/- 0.5 DO NOT SCALE DRAWING UNSPECIFIED ANGLE TOLERANCE +/- 5degrees 66-3018-122-0XX DECAL AXS PEDAL SENSOR CERTS A GEOMETRIC DIMENSIONING AND TOLERANCING TO BE INTERPRETED PER ASME Y14.5-2009 DOCUMENT MAY NOT REPRESENT COMPLETE REQUIREMENTS. REFER TO PRODUCT STRUCTURE ANSNYDERRELEASE REVRESPONSIBLEREVISION RECORD 100mm NOTES: 1. RED DASHED LINE REPRESENTS LINE PRINTED ON PREMASK 2. VERTICAL BACK SLIT SHOULD BE CENTERED ON PAPER BACKING 19.7 64.9 CENTER DECAL ON CENTER LINE AS SHOWN 18NOV1966-3018-122-010 BLACK = PROCESS BLACK (MATTE) LIGHT GREY = PANTONE COOL GREY 9 (MATTE) BLUE = DIE LINE ORANGE = PREMASK AND CARRIER equal (A) equal (A)

NVLAP LAB CODE 200065-0 TEST REPORT Report Number. : 13117430-E41V2 Applicant : SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607, United States Model : 00500 FCC ID : C9O-PDMB2 ISED : 10161A-PDMB2 EUT Description : Pedal Sensor with BLE and AIREA Radios Test Standard(s) : FCC Part 1 Subpart I FCC Part 2 Subpart J Date Of Issue: April 14, 2020 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13117430-E41V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 2 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 3/25/2020 Initial Issue -- V1 4/14/2020 Updated header and Section 6 -- REPORT NO: 13117430-E41V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 3 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. REFERENCES ....................................................................................................................5 4. FACILITIES AND ACCREDITATION ..................................................................................5 5. DEVICE UNDER TEST ........................................................................................................5 6. MAXIMUM OUTPUT POWER .............................................................................................5 7. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ...........................................6 7.1. FCC ..............................................................................................................................6 REPORT NO: 13117430-E41V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 4 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607 U.S.A EUT DESCRIPTION: Pedal Sensor with BLE and AIREA Radios MODEL: 00500 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. Approved & Released For UL Verification Services Inc. By: Prepared By: Dan Coronia Kiya Kedida Operations Leader Senior Project Engineer Consumer Technology Division Consumer Technology Division UL Verification Services Inc. UL Verification Services Inc. . REPORT NO: 13117430-E41V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 5 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 13117430-E39 and 13117430-E40 for operation in the 2.4 GHz band and UL Verification Services Inc. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports or client declarations. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://nist.gov/standards/scopes/2000650.htm. 5. DEVICE UNDER TEST The EUT is a Rear Shock with radios BLE operating in the frequency range of 2402 to 2480MHz and AIREA operating in the frequency range of 2405 to 2475 MHz . 6. MAXIMUM OUTPUT POWER The maximum output power of the device is declared as the following: BLE = Power: 5.5dBm; Antenna Gain: 1.4dBi AIREA = Power: 5.5dBm; Antenna Gain: 1.4dBi REPORT NO: 13117430-E41V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 6 of 6 UL VERIFICATION SERVICES INC. FORM NO: …

Text truncated - open the document above for the full version.

NVLAP Lab code: 200065-0 TEST REPORT Report Number. : 13117430-E39V2 Applicant : SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607, United States Model : 00500 FCC ID : C9O-PDMB2 ISED : 10161A-PDMB2 EUT Description : Pedal Sensor with BLE, and AIREA Radios Test Standard(s) : FCC 47 CFR PART 15 SUBPART C ISED RSS-247 ISSUE 2 ISED RSS-GEN ISSUE 5 Date Of Issue: April 14, 2020 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13117430-E39V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 2 of 43 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 3/18/2020 Initial Issue V2 4/14/2020 Updated Section 9.3 K.Kedida REPORT NO: 13117430-E39V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 3 of 43 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS REPORT REVISION HISTORY ..................................................................................................2 TABLE OF CONTENTS .............................................................................................................3 1. ATTESTATION OF TEST RESULTS ..................................................................................5 2. TEST METHODOLOGY ......................................................................................................7 3. FACILITIES AND ACCREDITATION ..................................................................................7 4. DECISION RULES AND MEASUREMENT UNCERTAINTY ...............................................8 4.1. METROLOGICAL TRACEABILITY ...............................................................................8 4.2. DECISION RULES ........................................................................................................8 4.3. MEASUREMENT UNCERTAINTY ................................................................................8 4.4. SAMPLE CALCULATION .............................................................................................8 5. EQUIPMENT UNDER TEST ................................................................................................9 5.1. EUT DESCRIPTION .....................................................................................................9 5.2. MAXIMUM OUTPUT POWER .......................................................................................9 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ...............................................................9 5.4. SOFTWARE AND FIRMWARE .....................................................................................9 5.5. WORST-CASE CONFIGURATION AND MODE ...........................................................9 5.6. DESCRIPTION OF TEST SETUP ...............................................................................10 6. MEASUREMENT METHOD...............................................................................................13 7. TEST AND MEASUREMENT EQUIPMENT ......................................................................14 8. ANTENNA PORT TEST RESULTS ...................................................................................15 8.1. ON TIME AND DUTY CYCLE .....................................................................................15 8.2. 99% BANDWIDTH ......................................................................................................16 8.3. 6 dB BANDWIDTH ......................................................................................................17 8.4. OUTPUT POWER .......................................................................................................18 8.5. AVERAGE POWER ....................................................................................................19 8.6. POWER SPECTRAL DENSITY ..................................................................................20 8.7. CONDUCTED SPURIOUS EMISSIONS .....................................................................22 9. RADIATED TEST RESULTS .............................................................................................24 9.1. LIMITS AND PROCEDURE ........................................................................................24 9.2. TRANSMITTER ABOVE 1 GHz ..................................................................................26 9.3. WORST CASE BELOW 30MHz ..................................................................................36 REPORT NO: 13117430-E39V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 4 of 43 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 9.4. WORST CASE BELOW 1 GHz ...................................................................................37 9.5. WORST CASE 18-26 GHz ..........................................................................................39 10. SETUP PHOTOS ...........................................................................................................41 REPORT NO: 13117430-E39V2 DATE: 4/14/2020 FCC ID: C9O-PDMB2 ISED: 10161A-PDMB2 Page 5 of 43 UL VERIFICATION SERVICES INC. 47173 Benicia Street, Fremont, CA 94538; USA TEL:(510) 319-4000 FAX:(510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 6060…

Text truncated - open the document above for the full version.

NVLAP Lab code: 200065-0 TEST REPORT Report Number. : 13117430-E40V2 Applicant : SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607, United States Model : 00500 FC…

Text truncated - open the document above for the full version.