C9O-SPMB2ELECTRONIC CONTROLLER WITH BLE AND AIREA RADIOS

95-3018-022-000 Rev B 1 © 2019 SRAM, LLC Electronic Regulatory Compliance Manual 2 Electronic Regulatory Compliance Manual 3 Konformitätserklärung für elektronische Geräte 4 Manual de cumplimiento de la normativa electrónica 5 Manuel sur le respect des règlements concernant l'électronique 6 Manuale di Conformità Normativa Elettronica 7 Handleiding over de regelnaleving voor elektronische apparatuur 8 Manual de Conformidade com os Regulamentos de Electrónica 9 電子関連規制コンプライアンス・マニュアル 10 电子监管合规手册 11 Elektroniczny podręcznik zgodności z przepisami 12 Vedledning vedr. overholdelse af regulativer for elektronik 13 Příručka shody se zákonnými nařízeními pro elektroniku 14 Manual de conformare reglementări echipamente electronicei 15 Εγχειρίδιο ρυθμιστικής συμμόρφωσης σχετικά με τα ηλεκτρονικά 16 전자규정 준수를 위한 안내 17 電子監管合規手冊 18 Руководство по соответствию нормативным требованиям электронного устройства 2 Complies with ID A Standards D A107248 HIDF16000136 HIDF16000136 Electronic Regulatory Compliance Manual SRAM LLC certifies that this product and its packaging are in compliance with: RE Directive, the Radio Equipment Directive 2014/53/EC WEEE Directive, the Waste Electrical and Electronic Equipment Directive 2012/19/EU RoHS Directive, the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/EC REACh Directive, the Regulation on Registration, Evaluation, Authorization and Restriction of Chemical Directive 1907/2006/EC Batteries and Accumulators and Waste Batteries and Accumulators Directive 2006/66/EU This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC”: before the radio certification number only signifies that Industry Canada technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L 'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Radiation Exposure Statement: Models 00010, 00110, 00210, 12810, 12910, 13200, 00220, 12920, 00030, 00130, 00020, 00120, 13000, 13100, 00500, 00601, 00610, 65501, 00230 and 09601 have been tested and complies with IC RSS 102 RF radiation exposure limits set forth for an uncontrolled environment when used with SRAM accessories supplied or designated for this product. To satisfy IC exposure requirements, a separation distance of at least 1.5 cm must be maintained between the antenna of this device and persons during device operation. The use of any other accessories may not ensure compliance with IC RSS 102 RF exposure guidelines. Declaration d'exposition aux radiations: Les modèles 00010, 00110, 00210, 12810, 12910, 13200, 00220, 12920, 00030, 00130, 00020, 00120, 13000, 13100, 00500, 00601, 00610, 65501, 00230 et 09601 ont été testés conformemment aux normes d'exposition d'emission RF de la IC RSS 102 pour un environement non controle lors d'utilisation avec les accessoires fournis or recommendes par SRAM. Pour satisfaire aux exigences d'exposition IC, une distance de separation d'au moins 1.5 cm doit etre maintenue entre l'antenne de cet appareil et des personnes pendant le fonctionnement de l'appareil. L'utilisation d'accessoires autres que ceux recommendes par SRAM ne guarantis pas la compatibilite avec les normes d'emission RF de la IC RSS 102. Warning: Any changes or modifications not expressively approved by SRAM could void the user's authority to operate this equipment. This product is ANT+ certified and complies with the bicycle power ANT+ Device Profile. For a complete listing of ANT+ Certified Products and their specific interoperability, please visit www.thisisant.com. 3 Complies with ID A Standards D A107248 HIDF16000136 HIDF16000136 Electronic Regulatory Compliance Manual Model #FCC IDIC ID TRA Dealer No: DA51171/16 ISRAEL מספר אישור אלחוטי של משרד התקשורת אסור להחליף את האנטנה המקורית של המכשיר ולא לעשות בו כל שינוי טכני אחר Left Shifter00010C90-LSBB110161A-LSBB1ER648161/1855-00222 Right Shifter00110C90-RSBB110161A-RSBB1ER64862/1855-00223 BlipBox00210C90-BOXB110161A-BOXB1ER64863/1855-00224 Front Derailleur12810C90-FDB110161A-FDB1ER64864/1855-00225 Rear Derailleur12910C90-RDB110161A-RDB1ER64865/1855-00226 Seatpost13200C90-…

Text truncated - open the document above for the full version.

Eagle AXS Transmission USER MANUAL 95-30xx-xxx-000 Rev A © 2021 SRAM, LLC User ManualUser ManualUser Manual User ManualUser ManualUser Manual User ManualUser ManualUser Manual DRAFT 2 SAFETY INSTRUCTIONS You must read and understand the Safety Instructions document included with your product before proceeding with installation. Improperly installed components are extremely dangerous and could result in severe and/or fatal injuries. If you have any questions about the installation of these components, consult a qualified bicycle mechanic. This document is also available on www.sram.com. CONSIGNES DE SÉCURITÉ Vous devez lire et comprendre le document consacré aux instructions de sécurité livré avec votre produit avant de procéder à son installation. Des composants installés de manière inappropriée sont extrêmement dangereux et peuvent provoquer des blessures graves, voire mortelles. Pour toute question concernant l’installation de ces composants, consultez un mécanicien vélo professionnel. Ce document est également disponible sur www.sram.com. INSTRUÇÕES DE SEGURANÇA Tem que ler e compreender o documento de Instruções de Segurança, incluído com o seu produto, antes de proceder com a instalação. Os componentes instalados de forma incorrecta são extremamente perigosos e poderão resultar em lesões graves e/ou fatais. Se tiver quaisquer perguntas sobre a instalação destes componentes, consulte um mecânico de bicicletas qualificado. Este documento também está disponível em www.sram.com. SICHERHEITSHINWEISE Bevor Sie mit der Installation beginnen, müssen Sie die Ihrem Produkt beiliegenden Sicherheitshinweise gelesen und verstanden haben. Falsch montierte Komponenten stellen eine erhebliche Gefahr dar und könnten zu schweren und/oder tödlichen Verletzungen führen. Wenn Sie Fragen zur Montage dieser Komponenten haben, wenden Sie sich an einen qualifizierten Fahrradmechaniker. Dieses Dokument steht auch unter www.sram.com zur Verfügung. ISTRUZIONI DI SICUREZZA L'utente deve leggere e comprendere il documento di Istruzioni di sicurezza accluso al prodotto, prima di procedere all’installazione. I componenti, se installati in modo improprio, sono estremamente pericolosi e potrebbero essere all’origine di ferite gravi e/o mortali. In caso di domande sull’installazione di questi componenti, consultare un meccanico per biciclette qualificato. Il presente documento è disponibile anche sul sito www.sram.com. 安全にお使いいただくために 取り付けを開始する前に、製品に付属し ている安全に関する記述を必ず読み、内 容を理解してください。コンポーネント を間違って取り付けると、非常に危険な 状態になり、その結果、重度または致命 的な障害を引き起こすことがあります。 これらのコンポーネントの取り付けに関 して質問がある場合は、正規の自転車整 備士にご相談ください。このマニュアル は www.sram.comにも掲載されていま す。 INSTRUCCIONES DE SEGURIDAD Antes de proceder a la instalación de este producto, es necesario que lea y entienda perfectamente el documento de instrucciones de seguridad que lo acompaña. Unos componentes mal instalados suponen un enorme peligro y pueden ocasionar lesiones graves o incluso mortales. Si tiene alguna pregunta acerca de la instalación de estos componentes, consulte con un mecánico de bicicletas cualificado. Este documento está disponible también en la dirección www.sram.com. VEILIGHEIDSINSTRUCTIES Lees en begrijp het document met veiligheidsinstructies dat met uw product is meegeleverd voordat u met de installatie begint. Verkeerd geïnstalleerde componenten kunnen buitengewoon gevaarlijk zijn en kunnen leiden tot ernstige en/of fatale verwondingen. Als u vragen hebt over de installatie van deze componenten, raadpleeg een vakbekwame fietsenmaker. Dit document is tevens beschikbaar op www.sram.com. 安全说明 进行安装之前，您必须阅读并理解产品随 附的安全说明书。部件安装不当是极为危 险的，可能导致严重甚至致命的人身伤 害。如果您对部件安装有任何疑问，请 咨询专业自行车技工。本文件也发布在 www.sram.com上。 DRAFT 3 SAFETY INSTRUCTIONS The bicycle frame must be compatible with the UDH hanger assembly. The thru axle and wheel must be compatible with the bicycle frame and UDH hanger assembly. Apply grease only to the thru axle threads. Do not apply grease to the UDH hanger or bolt. CONSIGNES DE SÉCURITÉ Le cadre du vélo doit être compatible avec le système de patte de dérailleur universelle UDH. L’axe traversant et la roue doivent être compatibles avec le cadre du vélo et le système de patte de dérailleur universelle UDH. Appliquez de la graisse uniquement sur le filetage de l’axe traversant. N’appliquez jamais de graisse sur la vis ou la patte UDH. INSTRUÇÕES DE SEGURANÇA O quadro da bicicleta tem que ser compatível com o conjunto do suporte Suspensor Universal do Derailleur (SUD/UDH). O eixo de atravessamento e a roda têm que ser compatíveis com o quadro da bicicleta e com o conjunto do Suspensor Universal do Derailleur (SUD/UDH). Aplique massa lubrificante apenas aos fios de rosca do eixo de atravessamento. Não aplique massa lubrificante ao suspensor SUD/UDH nem ao seu perno. SICHERHEITSHINWEISE Der Fahrradrahmen muss mit der UDH- Schaltaugen-Baugruppe kompatibel sein. Die Steckachse und das Laufrad müssen mit dem Fahrradrahmen und der UDH- Schaltaugen-Baugruppe kompatibel sein. Tragen Sie Schmierfett nur auf das Steckachsengewinde auf. Tragen Sie kein Schmierfett auf das UDH-Schaltauge oder die Schraube des UDH-Schaltauges auf. ISTRUZIONI DI SICUREZZA Il telaio della bicicletta deve essere compatibile con il gruppo forcellino UDH. L'asse passante e la ruota devono essere compatibili con il telaio della bicicletta e il gruppo forcellino UDH. Ingrassare solo le filettature dell’asse passante. Non applicare grasso sul forcellino UDH o sul bullone. 安全にお使いいただくために 自転車のフレームは、UDH ハンガー・アセ ンブリに適合していなければなりません。 スルーアクスルおよびホイールは、自転 車のフレームと UDH ハンガー・アセン ブリに適合していなければなりません。 グリスは、スルーアクスルのスレッドのみ に塗布します。UDH ハンガーまたはボル トには、グリスを塗布しないでください。 INSTRUCCIONES DE SEGURIDAD El cuadro de la bicicleta debe ser compatible con el conjunto de la percha UDH. El eje pasante y la rueda deben ser compatibles con el cuadro de la bicicleta y el conjunto de la percha UDH. Aplique grasa únicamente a las roscas del eje pasante. No aplique grasa a la percha UDH ni al perno. VEILIGHEIDSINSTRUCTIES Het fietsframe moet met de UDH-…

Text truncated - open the document above for the full version.

Date: 2024/01/09 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: C9O-SPMB2 1.SRAM, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.SRAM, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sinc erely yours, Name: Leo Yermakov Job Title: Regulatory Compliance Director Company Name: SRAM, LLC

Date: 2023/12/01 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: C9O Applicant (Grantee) FRN: 0021443403 To whom it may concern: SRAM, LLC (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for the service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Leo Yermakov SRAM, LLC FCC FRN: 0021443403 1000 W Fulton Market 4 th Floor Chicago, IL 60607 UNITED STATES [email protected] Sincerel y yours, Name: Leo Yermakov Job Title: Regulatory Compliance Director Company Name: SRAM, LLC 1000 W Fulton Market 4th Floor Chicago, IL 60607 UNITED STATES

Date: January 9, 2024 UL Verification Services I nc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until further written notice from the applicant Sincerely Yours, Leo Yermakov Regulatory Compliance Manager SRAM LLC

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: C9O-SPMB2 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Best Regards Leo Yermakov Regulatory Compliance Manager SRAM LLC January 9, 2024

Date: 11/4/2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Signatory Authorization FCC Grantee Code: C9O To whom it may concern: I, Leo Yermakov, the undersigned, hereby authorize Kyle Brenner to sign FCC related documents for SRAM. Sincerely Yours, Leo Yermakov Regulatory Compliance Director SRAM, LLC

A B C D E F G 12345678910 1112131415 12345678910 1112131415 H J K A B C D E F G H J K 100mm DRAWING NUMBERREVISION DRAWING NAME/DESCRIPTION CONFIDENTIAL - THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO SRAM CORPORATION AND MAY NOT BE DISCLOSED WITHOUT PERMISSION. FORMAT: A2SHEET: 1/1 ALL DIMENSIONS ARE mm UNSPECIFIED LENGTH TOLERANCE X.X +/- 0.5 DO NOT SCALE DRAWING UNSPECIFIED ANGLE TOLERANCE +/- 2degrees GEOMETRIC DIMENSIONING AND TOLERANCING TO BE INTERPRETED PER ASME Y 14.5-2009 DOCUMENT MAY NOT REPRESENT COMPLETE REQUIREMENTS. REFER TO PRODUCT STRUCTURE AINITIAL REVISIONJBERTA BCHANGE: ALL ARTWORKJBERTA REVRESPONSIBLEREVISION RECORD ARTWORK EC HOUSING COVER CERT 66-3018-148-0XXB NOT TO SCALE 10161A-SPMB2 10JAN24 66.3018.148.010 DESCRIPTION PART NUMBER 66.3018.148.010 ARTWORK EC HOUSING COVER CERT IFT: XXXXXXXX-XXXXX MADE IN TAIWAN 10161A-SPMB2 IFT: XXXXXXXX-XXXXX MADE IN TAIWAN A B C D E F G 12345678910 1112131415 12345678910 1112131415 H J K A B C D E F G H J K 100mm DRAWING NUMBERREVISION DRAWING NAME/DESCRIPTION CONFIDENTIAL - THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO SRAM CORPORATION AND MAY NOT BE DISCLOSED WITHOUT PERMISSION. FORMAT: A2SHEET: 1/1 ALL DIMENSIONS ARE mm UNSPECIFIED LENGTH TOLERANCE X.X +/- 0.5 DO NOT SCALE DRAWING UNSPECIFIED ANGLE TOLERANCE +/- 2degrees GEOMETRIC DIMENSIONING AND TOLERANCING TO BE INTERPRETED PER ASME Y 14.5-2009 DOCUMENT MAY NOT REPRESENT COMPLETE REQUIREMENTS. REFER TO PRODUCT STRUCTURE AINITIAL REVISIONJBERTA BCHANGE: ALL ARTWORKJBERTA CCHANGE: ALL ARTWORKJBERTA DCHANGE: ALL ARTWORKJBERTA REVRESPONSIBLEREVISION RECORD ARTWORK EC ECM BATTERY DOOR 66-3018-145-0XXD NOT TO SCALE 18NOV22 66.3018.145.010 DESCRIPTION PART NUMBER 66.3018.145.010 ARTWORK EC ECM BATTERY DOOR GRY center artwork on part as shown BLACK = PANTONE COOL GRAY 11C 1:1

TEST REPORT Report Number: 13684121-E3V3 Applicant : SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607, United States Model : 00230 FCC ID : C9O-SPMB2 EUT Description : Electronic Controller with BLE and AIREA Radios Test Standard(s) : FCC Part 1 Subpart I FCC Part 2 Subpart J Date Of Issue: 2024-01-10 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13684121-E3V3 DATE: 2024-01-10 FCC ID: C9O-SPMB2 Page 2 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 4/7/2021 Initial Issue -- V2 5/11/2021 Updated Section 8.1 Kiya Kedida V3 2024-01-10 Updated Cover Page and Section 2 Kiya Kedida REPORT NO: 13684121-E3V3 DATE: 2024-01-10 FCC ID: C9O-SPMB2 Page 3 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. REFERENCES ...................................................................................................................... 5 4. FACILITIES AND ACCREDITATION .................................................................................... 5 5. DEVICE UNDER TEST ......................................................................................................... 5 6. MAXIMUM OUTPUT POWER ............................................................................................... 5 7. RF EXPOSURE RESULTS ................................................................................................... 5 8. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS............................................ 6 8.1. FCC ................................................................................................................................ 6 REPORT NO: 13684121-E3V3 DATE: 2024-01-10 FCC ID: C9O-SPMB2 Page 4 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SRAM LLC 1000 W Fulton Market 4 th Floor Chicago, IL 60607, United States EUT DESCRIPTION: Electronic Controller with BLE and AIREA Radios MODEL: 00230 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the U.S. government. Approved & Released For UL Verification Services Inc. By: Reviewed By: Dan Coronia Kiya Kedida Operations Leader Senior Project Engineer Consumer Technology Division Consumer Technology Division UL Verification Services Inc. UL Verification Services Inc. REPORT NO: 13684121-E3V3 DATE: 2024-01-10 FCC ID: C9O-SPMB2 Page 5 of 6 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498 D01 v06, KDB 447498 D03 V01. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 13684121-E1 & 13684121-E2 for operation in the 2.4 GHz band and UL Verification Services Inc. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports or client declarations. 4. FACILITIES AND ACCREDITATION UL Verification Services Inc. is accredited by A2LA, Certificate Number 0751.05, for all testing performed within the scope of this report. Testing was performed at the locations noted below. 5. DEVICE UNDER TEST The EUT is an Electronic Controller with BLE and AIREA Radios, powered by CR2032 battery, BLE operating in the frequency range of 2402 to 2480MHz and AIREA operating in the frequency range of 2405 to 2475MHz . 6. MAXIMUM OUTPUT POWER The maximum output power of the device is declared as the following: BLE = Power: 6dBm AIREA = Power: 6dBm The antenna(s) gain and type, as provided by the manufacturer’ are as follows: The radio utilizes a ceramic chip antenna, with a maximum gain of 1.7 dBi. 7. …

Text truncated - open the document above for the full version.

W3008 Datasheet version 2.7. Bluetooth / WLAN / WiFi ceramic antenna. (01/10) © 2010. All Rights Reserved. Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C Pulse Finland Oy Takatie 6 90440 Kempele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas Features - Omni directional radiation - Low profile - Compact size W x L x H (3.2 x 1.6 x 1.1 mm) - Low weight (33 mg) - Fully SMD compatible - Lead free soldering compatible - Tape and reel packing - RoHS Compliant Product Applications - Bluetooth, WLAN, WiFi - IEEE 802.11b/g - ZigBee IEEE 802.15.4 - 2.4 GHz WLAN - 2.4 GHz ISM Band Systems Electrical specifications @ +25 °C Note: Electrical characteristics depend on test board (GP) size and antenna positioning on GP and Ground Clearance area size. Bluetooth, W3008 Typical performance (test board size 80x37 mm, PWB ground clearance area 4.00 x 4.25 mm) Bluetooth / WLAN / WiFi, W3008C Typical performance (test board size 80x37 mm, PWB ground clearance area 4.00 x 6.25 mm) Frequency Range [MHz] 2400–2483.5 Linear Max Gain [dBi] 1.7 (Peak) 0.7 (Band edges) Efficiency [%] / [dB] 70 / -1.6 (Peak) 55 / -2.6 (Band edges) Return loss min. [dB] -8 Operating Temperature [°C] -40 to +85 Impedance [Ω] 50 Frequency Range [MHz] 2400–2483.5 Linear Max Gain [dBi] 2.2 (Peak) 1.9 (Band edges) Efficiency [%] / [dB] 75 / -1.3 (Peak) 70 / -1.6 (Band edges) Return loss min. [dB] -11 Operating Temperature [°C] -40 to +85 Impedance [Ω] 50 © 2010. All Rights Reserved. Bluetooth / WLAN / WiFi Ceramic Chip Antenna Pulse Finland Oy Takatie 6 90440 Kempele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas W3008 Datasheet version 2.7. Bluetooth / WLAN / WiFi ceramic antenna. (01/10) Terminal Configuration, W3008 PWB features No. 1 2 3 Terminal name Feed GND GND Terminal Dimensions 0.8 x 0.65 mm 0.8 x 0.65 mm 0.8 x 1.60 mm PWB Layout © 2007. All Rights Reserved. Bluetooth Ceramic Chip Antenna W3008 Groun d c leared under a ntenna, c learance a rea 4 .00 x 4.25 mm Pulse Finland Oy Takatie 6 90440 K empele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas PWB featur es No. 1 2 3 Terminal name Feed GND GND Terminal Dimensions 0.8 x 0.65 mm 0.8 x 0.65 mm 0.8 x 1.60 mm PWB Layout © 2010. All Rights Reserved. Bluetooth / WLAN / WiFi Ceramic Chip Antenna Pulse Finland Oy Takatie 6 90440 Kempele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas W3008 Datasheet version 2.7. Bluetooth / WLAN / WiFi ceramic antenna. (01/10) Terminal Configuration , W3008C Antenna features No. 1 2 Terminal name Feed / GND Feed / GND Terminal Dimensions 0.62 x 1.36 mm 0.62 x 1.36 mm PWB features No. 1 2 3 Terminal name Feed GND GND Terminal Dimensions 0.8 x 0.65 mm 0.8 x 0.65 mm 0.8 x 1.60 mm PWB Layout Antenna Antenna is symmetrical. Either of terminals 1 or 2 can be feed / GND © 2007. All Rights Reserved. Bluetooth / WLAN / WiFi Ceramic Chip Antenna W3008c Groun d c leared under a ntenna, c learance a rea 4 .00 x 6.25 mm Pulse Finland Oy Takatie 6 90440 K empele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas Antenna featur es No. 1 2 Terminal name Feed / GND Feed / GND Terminal Dimensions 0.62 x 1.36 mm 0.62 x 1.36 mm PWB featur es No. 1 2 3 Terminal name Feed GND GND Terminal Dimensions 0.8 x 0.65 mm 0.8 x 0.65 mm 0.8 x 1.60 mm Antenna is symmetrical. Either of terminals 1 or 2 can be feed / GND PWB Layout Antenna © 2010. All Rights Reserved. Bluetooth / WLAN / WiFi Ceramic Chip Antenna Pulse Finland Oy Takatie 6 90440 Kempele, Finland Tel: +358 207 935 500 Fax: +358 207 935 501 www.pulseeng.com/antennas W3008 Datasheet version 2.7. Bluetooth / WLAN / WiFi ceramic antenna. (01/10) Typical Electrical Characteristics (T=25 °C), W3008 Typical Return Loss S11/ impedance, measured on the test board START 2 040.000 000 MHzSTOP 2 840.000 000 MHz Cor PRm CH1Markers 1.-8.1 915 dB 2.40000 GHz 2. -18.312 dB 2 440.000 000 MHz 3. -8.2296 dB 2.48350 GHz 20 Oct 2005 12:3 7:16 BT 5 dB/REF 0 dB CH1 S11& MLOG START 2 040.00 0 000 MHzSTO…

Text truncated - open the document above for the full version.