CWU-SAA596805SAA5968-05

INSTALLATION & HARDWARE REFERENCE MANUAL MODERO X ® SERIES G5 TOUCH PANELS MXT-2001-PAN 20.3" MODERO X SERIES G5 PANORAMIC TABLETOP TOUCH PANEL MXD-2001-PAN-L 20.3" MODERO X SERIES G5 PANORAMIC LANDSCAPE WALL MOUNT TOUCH PANEL MXD-2001-PAN-P 20.3" MODERO X SERIES G5 PANORAMIC PORTRAIT WALL MOUNT TOUCH PANEL MXT-1901-PAN 19.4" MODERO X SERIES G5 PANORAMIC TABLETOP TOUCH PANEL MXD-1901-PAN-L 19.4" MODERO X SERIES G5 PANORAMIC LANDSCAPE WALL MOUNT TOUCH PANEL MXD-1901-PAN-P 19.4" MODERO X SERIES G5 PANORAMIC PORTRAIT WALL MOUNT TOUCH PANEL MXT-1001 10.1" MODERO X SERIES G5 TABLETOP TOUCH PANEL MXD-1001-L 10.1" MODERO X SERIES G5 LANDSCAPE WALL MOUNT TOUCH PANEL MXD-1001-P 10.1" MODERO X SERIES G5 PORTRAIT WALL MOUNT TOUCH PANEL MXT-701 7" MODERO X SERIES G5 TABLETOP TOUCH PANEL MXD-701-L 7" MODERO X SERIES G5 LANDSCAPE WALL MOUNT TOUCH PANEL MXD-701-P 7" MODERO X SERIES G5 PORTRAIT WALL MOUNT TOUCH PANEL IMPORTANT SAFETY INSTRUCTIONS COPYRIGHT NOTICE AMX© 2015, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection claimed extends to AMX hardware and software and includes all forms and matters copyrightable material and information now allowed by statutory or judicial law or herein after granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited. LIABILITY NOTICE No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of this publication, AMX assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the information contained herein. Further, this publication and features described herein are subject to change without notice. AMX WARRANTY AND RETURN POLICY The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 1.READ these instructions. 2.KEEP these instructions. 3.HEED all warnings. 4.FOLLOW all instructions. 5.DO NOT use this apparatus near water. 6.CLEAN ONLY with dry cloth. 7.DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplif iers) that produce heat. 9.DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not f it into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specif ied by the manufacturer. 12. USE ONLY with a cart, stand, tripod, bracket, or table specif ied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualif ied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. 16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 18. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or f ire. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside source (such as human hands) into an integrated circuit, often resulting in damage to the circuit. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. WARNING: No naked flame sources - such as candles - should be placed on the product. WARNING: Equipment shall be connected to a MAINS socket outlet with a protective earthing connection. WARNING: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained. 3 Modero X® Series G5 Touch Panels - installation & Hardware Reference Manual ESD WARNING WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cau…

Text truncated - open the document above for the full version.

HARMAN AMX by HARMAN 3000 RESEARCH DRIVE RICHARDSON, TX 75082 USA TEL: 469.624.8000 8/10/2015 RE: FCC Application Cover Letter To Whom It May Concern: The radio used in the AMX Modero X touch panel is the Texas Instruments TRF7907A. The TRF7970A device is an integrated analog front end and data-framing device for a 13.56MHz Near Field Communication (NFC) system. AMX LLC. is seeking limited modular approval to FCC 15.207:2015 and FCC 15.225:2015. The respective FCC ID number is as follows: CWU-SAA596805. The test subject model is MXD-1000 containing the SAA5968-05 version of the NFC radio. Sincerely, Steve Donalson Sr. Compliance Engineer This space is provided for legal information such as bank references, incorporation details, etc. that are required in some countries. Simply highlight this text and replaceit with your own. Ifthis information is not required in your location, click anywhere on the border of this text box, then delete.

TORQUE TABLE ITEM NOTORQUE (IN-LBS) 146 ± .5 156 ± .2 MECHANICAL COMPONENTS ( FOR DESIGN REFERENCE ONLY) NOTESDESCRIPTIONPART NUMBER UOMQTY ITEM NO BOOT, MICROPHONE 20.3"/19.4" WALL MODERO X SERIES60-5968-14EA11 COPPER TAPE 1/2" WIDE 3M331366-5968-09IN8"2 STRAIN RELIEF CABLE, CAT5 45-5968-01EA13 CABLE,10 PIN FFC, 0.5MM PITCH, 165MM, SAME SIDE64-0710-SAEA14 COVER, ELECTRONICS 7"/10" WALL, MODERO X SERIES60-5968-31EA15 DISPLAY OVERLAY BONDING, 7" 69-5968-04BEA16 DISPLAY CABLE 7" WALL SAA5968-81EA17 ENGINEERING CABLE ASSEMBLY, STRAP, GROUND, W/TERMINAL RINGECA5968-04EA18 ENGINEERING MECHANICAL ASSEMBLY, BACKBOX, 7" WALL, MODERO X SERIESEMA5968-13EA19 ETHERNET CABLE RJ45 WALL 10 & 7 ECA5968-06EA110 FRAME, DISPLAY, 7" WALL, MODERO X SERIES60-5968-26EA111 GASKET, FOAM SPEAKER 7" WALL66-5968-13EA112 MICROPHONE W/CABLE 23-0701-SAEA113 SCREW, #2 X .25, PPH PLASTITE, SS80-0107-06EA614 SCREW, #2 X 3/4" LONG PLASTITE80-0286EA415 LABEL, MATTE METALLIZED POLY , 1.5 X .75 91-0500-03EA116 LABEL, CLASS B, FCC/CE91-0540-01EA117 SENSOR PCB TABLE & WALL MODERO SERIESSAA5968-05EA118 CABLE,15 PIN FFC, 0.5MM PITCH, 165MM, SAME SIDE64-0709-SAEA119 SPEAKER, 4.0 OHM, 2.0 W, SA, BACKBOX, PIGTAIL 23-0004-SAEA120 SUB ASSY, MXT-700 G5, INTERFACE BOARDSAA5968-15EA121 WASHER, #2 FLAT -.25 MAX OD X .02 THICK80-0308-01EA322 TAPE, VHB 3M4914, 3/16" WIDE X .010" THICK 66-5968-21INAR23 SHIELD, ELECTRONICS 7" WALL 66-5968-15EA124 SHIELD, LIGHT, PROXIMITY SENSOR 66-5968-10EA125 SUB ASSY, MXT-PAN SOM SAA5968-01EA126 GASKET, FABRIC, CONDUCTIVE 0.5" LONG66-5968-19EA227 TAPE, 1/2" WIDE, KAPTON POLYMIDE FILM66-0025INBLK28 REF. PRO/E type:1 REV. = F REF. PRO/E ASSEM FILE = EA5968-08 NOTES: UNLESS OTHERWISE SPECIFIED RoHS COMPLIANCE: THIS PRODUCT MUST MEET THE REQUIREMENTS OF DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF JANUARY 27, 2003 ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT AND ITS AMENDMENTS (RoHS). USE OF MERCURY, CADMIUM, LEAD, CHROMIUM VI, PBB AND PBDE IN ANY MATERIALS USED TO CONSTRUCT THIS COMPONENT OR ASSEMBLY SHALL NOT EXCEED THE MAXIMUM CONCENTRATION VALUES SPECIFIED EXCEPT IN EXEMPTED APPLICATIONS. 1. ALL DIMENSIONS IN INCHES AND DIMENSIONS IN [ ] ARE IN MILLIMETERS. 2. TORQUE SCREWS AS DEFINED IN THE TORQUE TABLE. THE TORQUE VALUES APPLY TO CLEAN AND DRY PARTS. UNLESS OTHERWISE STATED, THE ARTICLE SPECIFIED SHALL BE RoHS COMPLIANT PER EU DIRECTIVE 2002/95/EC 4 3 2 1 4 3 2 1 HFEDCBA HGFEDCBA SIZE DRAWING NUMBER 1 OF 3 0.750 1 REV D ® AMX LLC 3000 RESEARCH DRIVE RICHARDSON, TX 75082 SHEET SCALE THIRD ANGLE PROJECTION NOTICE: This drawing is the property of AMX LLC All information contained herein this is not generally known shall be confidential except to the extent the information had been previously established. This drawings may not be copied, reproduced, or used as the basis for manufacture or sale without written permission. F EA5968-08 MECHANICAL ASSEMBLY,TOUCH PANEL 7" MODERO PANORAMIC WALL W/O LOGO EA5968-08 REVISIONS APPROVEDDATEDESCRIPTIONECN NUMBERREV 12-Apr-12PROTOTPYE RELEASEN/A1 1-May-12RELEASE TO PRODUCTION19474A 18-Jul-12UPDATED BOM19665B 17-Aug-12UPDATED BOM19827C P. UY04-Sep-13 REMOVING P/N 91-0500-09 AND 91-0750. REPLACING IT WITH P/N 91-0500-03 AND 91-0540-01 21314D-R1 MJS18-Oct-13ITEM 23 CHANGE LENGTH OF TAPE TO AR21547E-R1 J. PORTER31-Mar-14REPLACED SAA5968-04 WITH SAA5968-1522144F UNLESS OTHERWISE SPECIFIED SURFACE FLATNESS .003 TIR PER LINEAR INCH 1.0±ANGLES: 0.010±.XXX = 0.02±.XX = 0.1±TOLERANCE ON DECIMAL DIMENSIONS: .X = ALL DIMENSIONS IN INCHES. DO NOT SCALE DRAWING 1.5 TYP SWITCH SETTINGS IDMODELID3ID2ID1ID0 0XB 7" WALL 1011 DETAIL E SWITCH SETTING LOCATE OVER CONTACTS IN SENSOR PCB MAC ADDRES LABEL PROVIDED WITH SAA 1.000SCALE SEE DETAIL A SEE DETAIL D 1.500SCALE ADETAIL 1.500SCALE DDETAIL 3.000SCALE DETAIL E 7 1 4 1 19 1 2 2 6 1 10 1 17 1 8 1 11 1 21 1 15 4 14 1 18 1 14 2 22 2 25 1 24 1 26 1 27 2 5 1 16 1 20 1 12 1 14 2 1 1 13 1 6 1 3 1 14 1 22 1 27 2 4 3 2 1 4 3 2 1 HFEDCBA HGFEDCBA 2 SIZE DRAWING NUMBER 2 OF 3 D AMX LLC 3000 RESEARCH DRIVE RICHARDSON, TX 75082 ® REV 0.750 EA5968-08 SHEET SCALE NOTICE: This drawing is the property of AMX LLC. All information contained herein this is not generally known shall be confidential except to the extent the information had been previously established. This drawings may not be copied, reproduced, or used as the basis for manufacture or sale without written permission. F EA5968-08 MECHANICAL ASSEMBLY,TOUCH PANEL 7" MODERO PANORAMIC WALL W/O LOGO E E E-ESECTION SEE DETAIL B SEE DETAIL C 4.000SCALE BDETAIL 4.000SCALE CDETAIL 1.000SCALE NO DISPLAY SHOWN 23 12" 9 1 4 3 2 1 4 3 2 1 HFEDCBA HGFEDCBA 3 SIZE DRAWING NUMBER 3 OF 3 D AMX LLC 3000 RESEARCH DRIVE RICHARDSON, TX 75082 ® REV 1.000 EA5968-08 SHEET SCALE NOTICE: This drawing is the property of AMX LLC. All information contained herein this is not generally known shall be confidential except to the extent the information had been previously established. This drawings may not be copied, reproduced, or used as the basis for manufacture or sale without written permission. F EA5968-08 MECHANICAL ASSEMBLY,TOUCH PANEL 7" MODERO PANORAMIC WALL W/O LOGO

B-R1 23525 REPLACE 91-0500-03 WITH 91-5968-89. ADD 91-05 61 AND 91-0562. 91-5968-89 LABEL, MODERO X, CCC, INPUT: 8W, 1.75 X 1.40 45 1 EA 91-0561 LABEL, 1.50 X .50, RCM, EFUP, FCC, CE, WEEE 46 1 EA 91-0562 LABEL, 1.50 X .50, PWR SUPPLY STATEMENT, CHINESE AND ENGLISH B-R1 66-5968-60 TAPE, 3M 5962 VHB 0.5" X 36 YD X .062" THICK 66-5968-59 EMI, FOAM D-SHAPE GASKET 18'L X 0.2" W X .094" THICK C-R1 23757 Adding item 33 part number 66-5968-59, and Item 37 66-5968-60 7/21/2015 P.UY C-R1 D-R1 23903 ADD 91-0512 FOR FCC ID AND IC ID MARKINGS, MOVE 91-0562 LABEL, AD D NOTE 6, REMOVE RoHS NOTE. 47 1 EA 91-0512 LABEL, GLOSSY WH. PERM POLY, 1.25 X .25 D-R1 MARK LABEL WITH: MODEL #: SAA5968-05CONTAINS FCC ID: CWU-SAA596805CONTAINS IC: 5078B-SAA596805 6 45 1 46 1 B-R1 C-R1 47 1 D-R1 6 B-R1 C-R1 D-R1 B-R1 C-R1 D-R1

Modero X S ensor B oard A nd NFC I nterface M odules 10” Table 10” Table 7” Table 7” wall

SAA5968‐05 sensor PCB used on MXT‐700, MXD‐700, MXT‐1000 and MXD‐1000 panels This board contain an RFID transceiver chip TRF7970A manufactured by Texas Instruments and is designed to operate at a distance of a few centimeters. The block diagram of the chip, as found in the data sheet by TI, is shown below: List of Antennas to be used on transmitter:  The antenna system consists of a PCB loop antenna. The design was provided by Texas Instruments to work with the transceiver chip TRF7970A. See picture below for details: U2 is the TRF7970A transceiver chip. To the left of the chip is a 13.56 MHz crystal oscillator (Y1) driving TRF7970A. The loop antenna occupies the upper right hand corner of the PCB, just to the right of L2. Since this antenna is neither removable nor replaceable, it complies with FCC 15.203.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety AMX LLC SAA5968-05 FCC 15.207:2015 FCC 15.225:2015 Report # XNTE0039.6 NVLAP Lab Code: 200881-0 CERTIFICATE OF TEST 2014-12-10 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Last Date of Test: May 08, 2015 AMX LLC Models: SAA5968-05 Radio Equipment Testing Standards Specification Method FCC 15.207:2015 ANSI C63.10:2009 FCC 15.225:2015 ANSI C63.10:2009 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions Yes Pass 6.4 Field Strength of Fundamental Yes Pass 6.4 Field Strength of Spurious Emissions < 30 MHz Yes Pass 6.5 Field Strength of Spurious Emissions > 30 MHz Yes Pass 6.8 Frequency Stability Yes Pass Deviations From Test Standards None Approved By: Jeremiah Darden, Operations Manager Report No. XNTE0039.62/43 REVISION HISTORY REV 2014.10.14 Revision Number Description Date Page Number 00 None Report No. XNTE0039.63/43 ACCREDITATIONS AND AUTHORIZATIONS REV 2015.2.19 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ http://gsi.nist.gov/global/docs/cabs/designations.html Report No. XNTE0039.64/43 MEASUREMENT UNCERTAINTY TMU.2014.12.03 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) for each test is on each data sheet. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 028 (or CISPR 16-4-2 as applicable), and are available upon request. The following table represents the Measurement Uncertainty (MU) budgets for each of the tests that may be contained in this report. Test + MU - MU Frequency Accuracy (Hz) 0.0007% -0.0007% Amplitude Accuracy (dB) 1.2 dB -1.2 dB Conducted Power (dB) 0.3 dB -0.3 dB Radiated Power via Substitution (dB) 0.7 dB -0.7 dB Temperature (degrees C) 0.7°C -0.7°C Humidity (% RH) 2.5% RH -2.5% RH Voltage (AC) 1.0% -1.0% Voltage (DC) 0.7% -0.7% Field Strength (dB) 4.7 dB -4.7 dB AC Powerline Conducted Emissions (dB) 2.9 dB -2.9 dB Report No. XNTE0039.65/43 FACILITIES REV 2015.2.19 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-08, MN10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 554-8214 Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 9801 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. XNTE0039.66/43 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: AMX LLC Address: 3000 Research Drive City, State, Zip: Richardson, TX 75082 Test Requested By: Heath Sharp Model: SAA5968-05 First Da…

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2015.03.10 PSA-ESCI 2015.03.03, EmiR5 2015.03.19.1 photo Unit 2, MXD-1000 (Horizontal) (1).JPG Unit 2, MXD-1000 (Horizontal) (2).JPG FIELD STRENGTH OF THE FUNDAMENTAL PSA-ESCI 2015.03.03 photo Unit 2, MXD-1000 (On Side) (1).JPG Unit 2, MXD-1000 (On Side) (2).JPG FIELD STRENGTH OF THE FUNDAMENTAL PSA-ESCI 2015.03.03 photo Unit 2, MXD-1000 (Vertical) (1).JPG Unit 2, MXD-1000 (Vertical) (2).JPG FIELD STRENGTH OF THE FUNDAMENTAL PSA-ESCI 2015.03.03 photo Loop Antenna_Horizontal.JPG Loop Antenna_On Side.JPG FIELD STRENGTH OF THE FUNDAMENTAL PSA-ESCI 2015.03.03 photo Loop Antenna_Vertical.JPG FIELD STRENGTH OF THE FUNDAMENTAL PSA-ESCI 2015.03.03 photo Unit 1, MXD-430 (On Side) (1).JPG Unit 2, MXD-1000 (Vertical) (1).JPG FIELD STRENGTH OF SPURIOUS EMISSIONS > 30 MHZ PSA-ESCI 2015.03.03 photo Unit 1, MXD-430 (On Side) (1).JPG Unit 2, MXD-1000 (On Side) (1).JPG FIELD STRENGTH OF SPURIOUS EMISSIONS < 30 MHZ PSA-ESCI 2015.03.03 XMit 2015.01.14 FS (4).JPG FS (6).JPG FREQUENCY STABILITY XMit 2015.01.14 FS (8).JPG FREQUENCY STABILITY