EHA-1000CP01F1000CP01F9, 1000CP02F9, 1001CP01F9

70 Series Mobile Computer CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI User Manual ii70 Series Mobile Computer User Manual Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2011 - 2012 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. 70 Series Mobile Computer User Manualiii Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number DateDescription of Change 00511/2012Added information to support firmware version 1.50: •CloneNGo application •New camera settings •SceneEditor application •EA30 imager extended reading range 0042/2012Revised information on ScanNGo bar codes. 00312/2011Added information on: •the flashlight feature. •the Carrier Selection application. Revised information on: •the Intermec Settings menus. •upgrading the system software and the operating system. •GPS procedures. •ScanNGo bar codes. 00206/2011Revised to add information on non-incendive (NI) versions of the computer, provisioning the computer, the new ScanDiagnostics application, and how to use the 70 Series as a USB mass storage device. Also corrected the cold boot procedure and removed the compass. iv70 Series Mobile Computer User Manual Contents 70 Series Mobile Computer User Manualv Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii 1 About the Computer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About the 70 Series Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What’s New in This Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Overview of 70 Series Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 70 Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About Language Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Change the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Enter Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Enter Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Enter Characters on the CK70 and CK71 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . 24 About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

73 6 Configure the Computer Use this chapter to learn about the available methods for configuring your mobile computer and how to use Intermec Settings. You can also use this chapter to learn how to configure network communications and wireless security. Chapter 6 — Configure the Computer 7470 Series Mobile Computer User Manual How to Configure the Computer You can configure many parameters on the computer such as the bar code symbologies it decodes or the network settings. The values you set for these parameters determine how the computer operates. There are several ways to configure the computer: •Directly on the computer. You can use Intermec Settings directly on the computer to change only the settings on that computer. For more information, see the next section, “Use Intermec Settings on the Computer.” •Remotely using Intermec SmartSystems. When you use SmartSystems, you can remotely configure all of your 70 Series mobile computers as well as other SmartSystems-enabled Intermec computers and peripherals. For more information, see “Use Intermec Settings Remotely with SmartSystems” on page 82. •You can use a third-party device management product that supports the computer and Intermec Settings, such as Soti MobiControl or Wavelink Avalanche. For more information, visit the Device Management page on the Intermec website. You can also configure the computer with configuration bundles that you create using SmartSystems Foundation. For more information, see the SmartSystems Foundation Online Help. Use Intermec Settings on the Computer Use Intermec Settings to configure parameters for Intermec applications on the computer as well as some device-specific parameters like volume. You can configure parameters for important functions like data collection and communications. Chapter 6 — Configure the Computer 70 Series Mobile Computer User Manual75 Start Intermec Settings Intermec Settings is located on the System screen. •Tap Start > Settings > System > Intermec Settings. The Intermec Settings Main Menu appears. About the Structure of Intermec Settings Use the tables below to help find the parameters in Intermec Settings that you want to configure. Each table contains the parameters for one of the Intermec Settings Main Menu options. If you see > next to a menu option, there are more screens available in the next level. If you see ... next to a menu option, there is only one more screen available. Most parameters are saved as soon as you tap OK. Some settings such as the Serial Port Switch require you to reboot the computer for the changes to take effect. Chapter 6 — Configure the Computer 7670 Series Mobile Computer User Manual Data Collection Menu Communications Menu Data Collection OptionsParameters You Can Configure Internal Scanner •Symbologies •Scanner settings •Imager settings •Decode security Bluetooth Scanner •Symbologies •Scanner settings •Imager settings •Decode security Dock Tethered Scanner •Symbologies •Scanner settings •Scanner port settings •Imager settings •Decode security Camera •Symbologies •Scanner settings •Camera settings •Decode security BT-Configure on ConnectBluetooth-configure on connect Magstripe Reader •Enable magstripe reader •Reader model (read-only) Communications OptionsParameters You Can Configure Device NameDevice name 802.11 Radio •Security choice (supplicant) •Security settings (includes Wi-Fi settings such as enable/disable radio) •IP settings •Certificates Ethernet AdapterIP settings BluetoothBluetooth settings (power, discoverable, connectable, and so on) Chapter 6 — Configure the Computer 70 Series Mobile Computer User Manual77 Device Settings Menu WWAN Radio•Add WWAN connection •Edit WWAN connections •Manage WWAN radio •Carrier Selection •WWAN information Serial Port SwitchSerial port switch settings (IrDA, docking connector, and back interface) Device Settings OptionsParameters You Can Configure Date and TimeDate and time settings Good Read •Internal scanner •Tethered scanner •Bluetooth scanner Sounds •Beeper and voice volume •Headset beeper volume •Vibrate mode intensity •Screen taps •Key clicks BacklightBacklight settings (display backlight, keypad backlight, and light level) Screen •Screen rotation •Screen rotation sensor KeypadButton Remapping (Flashlight timeout, Left side lower button, Handle trigger, Center scan button, Left side upper button, Right side upper button, Right side lower button) Power Management •Power button •Battery power •External power •Device off sensor USBUSB function driver System Component VersionsSystem component versions (read-only) IDL Runtime VersionsITC50 (read-only) Communications OptionsParameters You Can Configure Chapter 6 — Configure the Computer 7870 Series Mobile Computer User Manual Printer Menu GPS Menu SmartSystems Information Menu Profile Settings ApplicationWhether these parameter options appear in Profile Settings: •Camera •Power •Scanning Features Disabled by PolicyNone (read-only) Printer OptionsParameters You Can Configure Printer (if connected through Bluetooth) Printer settings (Auto detect printer, memory, display, and so on) Device Settings OptionsParameters You Can Configure Note: The Printer menu displays settings for Bluetooth connected printers. The settings that appear in the menu are dependent on the printer that is paired with the device. The printer needs to be using the Wireless Printing application. GPS Options GPSBread crumbing settings SmartSystems Information OptionsParameters You Can Configure IdentityIdentity information (hardware version, firmware version, OS version, and so on) (read-only) AdministratorAdministrator settings (name, phone, and email) LocationLocation settings (country, state, city, campus, and detail) InformationDevice Notes (read-only) Chapter 6 — Configure the Computer 70 Series Mobile Computer User Manual79 Virtual Wedge Menu Core Messaging Service Menu Device Monitor Menu License Manager Menu Virtual Wedge OptionsParameters You Can Configure Enable Virtual WedgeEn…

Text truncated - open the document above for the full version.

DRAFT 70 Series Mobile Computer CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI, CK70 RFID, CN70e RFID, CN70 RFID User Manual DRAFT ii70 Series Mobile Computer User Manual Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2011–2013 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. DRAFT 70 Series Mobile Computer User Manualiii Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number DateDescription of Change 00601/2013Added information to support Intermec RFID standalone demonstration application for these mobile computers: CK70 RFID, CN70e RFID, and CN70 RFID. 00511/2012Added information to support firmware version 1.50: •CloneNGo application •New camera settings •SceneEditor application •EA30 imager extended reading range 0042/2012Revised information on ScanNGo bar codes. 00312/2011Added information on: •the flashlight feature. •the Carrier Selection application. Revised information on: •the Intermec Settings menus. •upgrading the system software and the operating system. •GPS procedures. •ScanNGo bar codes. 00206/2011Revised to add information on non-incendive (NI) versions of the computer, provisioning the computer, the new ScanDiagnostics application, and how to use the 70 Series as a USB mass storage device. Also corrected the cold boot procedure and removed the compass. DRAFT 1 1 About the Computer Features This chapter introduces the 70 Series Mobile Computers with Windows® Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it. DRAFT Chapter 1 — About the Computer Features 270 Series Mobile Computer User Manual About the 70 Series Mobile Computers The ergonomically designed Intermec 70 Series Mobile Computers are built on the Microsoft Windows Embedded Handheld operating system. They are lightweight, easy-to-use, and run most software developed for the Windows Embedded platform, including standalone, client-server, and browser-based applications. The 70 Series family of computers consists of four different models: the CN70, CN70e, CK70 and CK71. The CN70 and CN70e have the same features except that the CN70e offers a larger keypad for data-input intensive applications. The CK70 and CK71 have most of the same features, but the CK71 offers a choice of imager options and does not offer a WWAN radio option (phone). For hazardous environments, Intermec offers non-incendive (NI) models of each 70 Series computer. Throughout this manual, all versions of the mobile computer are referred to as 70 Series unless information is specific to a particular model of computer. In most of the user manual, pictures of the CN70 and CK70 represent the four models of the 70 Series computers. The Intermec RFID Demo IM11 handheld computers (CK70 RFID, CN70e RFID, and CN70 RFID) have a visual RFID label indicated on the Front View. CN70 Front View Scan button On/off button Microphone Cell phone speaker Notification LED Good read LED Battery status LED DRAFT Chapter 1 — About the Computer Features 70 Series Mobile Computer User Manual3 CN70 Back View CK70 and CK71 Front View IrDa port Speaker port Imager Camera Battery Scan button Microphone On/off button Cell phone speaker Notification LED Good read LED Battery status LED DRAFT Chapter 1 — About the Computer Features 470 Series Mobile Computer User Manual CK70 and CK71 Back View What’s New in This Release This version of the user manual supports the following new features: •Intermec 70 Series RFID Demo IM11 application allows users to read and write RFID tags without the use of an outside application such as Notepad or Excel. For more information, see “About Intermec 70 Series RFID Demo” on page 48. Overview of 70 Series Features The 70 Series includes these standard features: •EA30 area imager that can read bar codes and capture images •(CK71 only) Choice of EA30, EX25, or EV12 imagers •Multi-processor architecture with 512 MB DRAM and 1G Flash •CDMA, UMTS, or Flexible Network Radio capability (not available on CK71) •802.11a/b/g/n and Bluetooth® radios •GPS radio on CDMA, UMTS, or Flexible Network Radio computers (not available on CK71) Imager Camera IrDA port Battery IrDA port Imager Camera Battery Left speaker port Left speaker port DRAFT Chapter 1 — About the Computer Features 70 Series Mobile Computer User Manual5 •5-megapixel auto-focus color camera •Customer-accessible microSD slot for memory cards up to 32 GB •Customer-accessible SIM card slot •IrDA port with speeds up to 4 Mbps •Intermec RFID Demo (models: CK70 RFID, CN70e RFID,…

Text truncated - open the document above for the full version.

CN70 RFID, CN70e RFID Mobile Computer Compliance Insert Models 1000CP01F9, 1000CP02F9 Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Caution: For use with Intermec battery pack Model(s) 1000AB01 and 1000AB02 only. See battery instructions. For Power Supply use Intermec Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using 1002UC01 or 1002UD01 adapters. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Warning: This equipment complies with International Commission on Non- Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.2 cm (0.5 in.) space between the device and the body. To find RF exposure information, go to www.intermec.com > Products > Computers (e.g.) > Handheld Computers (e.g.) > CN70 (e.g.) > Manuals tab and scroll down to Regulatory Information. Laser Compliance and Precaution The 1000CP01F9 and 1000CP02F9 are registered with the CDRH as a Class 2 LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-670 nm. Caution: There are no user serviceable parts inside the 1000CP01F9 and 1000CP02F9. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-670 nm. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1000CP01F9 and 1000CP02F9. *Insert English LASER label here * Contact the product graphics department for label content. U.S.A. Digital Emissions Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the radio or television receiving antenna. 2. Increase the separation between the computer equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. 4. Consult the dealer or an experienced radio television technician for help. Canadian Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) 802.11a Radio Precaution Statement • 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 – 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. • The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470- 5725 MHz shall comply with the e.i.r.p. limit. • The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. • Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. For Users in Canada (fr)(Translate to French) Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the…

Text truncated - open the document above for the full version.

CK70 RFID Mobile Computer Compliance Insert Model 1001CP01F9 Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Caution: For use with Intermec battery pack Model(s) 1001AB01 and 1001AB02 only. See battery instructions. For Power Supply use Intermec Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using 1002UC02 or 1002UD02 adapters. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Warning: This equipment complies with International Commission on Non- Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.2 cm (0.5 in.) space between the device and the body. To find RF exposure information, go to www.intermec.com > Products > Computers (e.g.) > Handheld Computers (e.g.) > CK70 (e.g.) > Manuals tab and scroll down to Regulatory Information. Laser Compliance and Precaution The 1001CP01F9 is registered with the CDRH as a Class 2 LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-670 nm. Caution: There are no user serviceable parts inside the 1001CP01F9. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-670 nm. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1001CP01F9. *Insert English LASER label here * Contact the product graphics department for label content. U.S.A. Digital Emissions Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the radio or television receiving antenna. 2. Increase the separation between the computer equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. 4. Consult the dealer or an experienced radio television technician for help. Canadian Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) 802.11a Radio Precaution Statement • 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 – 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. • The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470- 5725 MHz shall comply with the e.i.r.p. limit. • The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. • Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. For Users in Canada (fr)(Translate to French) Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may…

Text truncated - open the document above for the full version.