EHA-1015CP01X11015CP01

1 CN51 Mobile Computer Compliance Insert Model 1015CP01 For Users in English-Speaking Regions (en) Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Battery, Charger, and Power Supply Information 802.11 Radio Precaution Statement Radiation Exposure Statement If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.00 cm (0.39 in) space between the device and the body. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. To find RF exposure information, go to www.intermec.com > Products > Computers > Handheld Computers > CN51 > Manuals tab, and then scroll down to Regulatory Information. For Users in the U.S.A. and Canada Imager and Camera Flash Compliance and Precaution The 1015CP01 is registered with the CDRH as a Class II LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-680 nm. This product complies with IEC 62471:2006-07 for LED safety. This product may use any of the following Intermec scan engines: •EA30 •EA31 To find Laser and Imager classification information for Intermec scan engines, go to www.intermec.com > Products > Computers > Handheld Computers > CN51 > Manuals tab, and then scroll down to Regulatory Information. The camera assembly with flash is classified as: Risk Category 2. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1015CP01. Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Caution: For use with Intermec battery pack Model 1015AB01 only. See battery instructions. For power supply, use Intermec Model(s) 1015AV01, AE37, or AE36. No user-serviceable parts. Caution: The battery pack used with this product may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100 °C (212 °F). Do not short circuit; may cause burns. Keep away from children. Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. Caution: When using the camera flash, keep the camera flash LED at least 317 mm (12.5 in) away from the subject’s eyes. Otherwise serious damage to one’s eyes may occur. Caution: There are no user serviceable parts inside the 1015CP01. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-680 nm. Complies with IDA Standards DA 102905 2 U.S.A. Digital Emissions Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the radio or television receiving antenna. •Increase the separation between the computer equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. •Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) 802.11a Radio Precaution Statement •802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHZ radio channels 34 - 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. •The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit. •The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to- point and non point-to-point operation as appropriate. •Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5470-5725 M…

Text truncated - open the document above for the full version.

Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2013 Intermec Technologies Corporation. All rights reserved. CN 51 Mobile Computer Quick Start Guide CN51 Mobile Computer Quick Start Guide *930-276-001* P/N 930-276-001 移动计算机快速入门指南 行動電腦快速入門指南 Guide de démarrage rapide d’ordinateur mobile Mobilcomputer-Kurzanleitung Panduan Memulai Cepat Komputer Layap Manuale di avvio rapido per computer portatile 모바일 컴퓨터 퀵 스타트 가이드 Manual de Consulta Rápida do Coletor de Dados Êðàòêîå ðóêîâîäñòâî Íàëàäîííûé êîìïüþòåð Guía de comienzo rápido para la computadora móvil คู่มือการริเริ่ม คอมพิวเตอร์เคลื่อนที่เร่งด่วน Hızlı Başlama Kılavuzu Where to Find More Information 有关详细信息 有關詳細信息 Où trouver d’autres détails Verweise zu weiteren Informationen Tempat Mencari Informasi Lebih Lanjut Per ulterior informazioni 정보를 더 발견하기 위하여 어디에 Onde obter mais informações Гäå íàéòи äîïîëíиòåëüíóþ иíфîðìàциþ Dónde encontrar más información จะค้นหาข้อมูลมากยิ่งที่ไหน Daha Fazla Bilgi Nerede Bulunabilir www.intermec.com In the U.S.A. and Canada, call 1.800.755.5505 This product is protected by one or more patents. 本产品受到一项或多项专利保护。本產品 受到一項或多項專利保護。Ce produit est protege par un brevet ou plus. Dieses Produkt ist durch ein oder mehrere Patente geschutzt. Produk ini dilindungi oleh satu atau lebih paten. Questo prodotto è protetto da uno o più dei seguenti brevetti. 본 제품은 하나 이상의 특허 권에 의해 보호를 받습니다. Este produto está protegido por uma ou mais patentes. Эòîò ïðîäóêò зàщищåí îäíиì иëи íåñêîëüêиìи ïàòåíòàìи. Este producto esta protegido por una o varias patentes. ผลิตภัณฑ์นี้ป้องกันโดยสิทธิบัตรหนึ่งหรือมากกว่า. Bu ürün bir veya birden fazla patentle korunmaktadır. Electrical rating. 额定电压及电流。電子規定值。Cote électrique. Stromversorgung. Peringkat kelistrikan. Specifiche elettriche. 전기 등급. Especificações eléctricas. Пиòàíиå. Calificacón eléctrica. อัตราอิเล็กทรอนิกส. Voltaj bilgileri: x 4,65 V 3 A To use the CN51, you need a 1015AB01 battery pack. Battery packs and battery chargers are sold and ordered separately. For help, contact your Intermec sales representative. 要使用CN51，你需要电池组一个1015AB01。电池和电池充电器均单独出售，需另行 订购。如需帮助，请联系当地 Intermec 服务代表。 要使用CN51，你需要電池組一個1015AB01。電池和電池充電器 均單獨出售，需另 行訂購。如需幫助，請聯繫當地的 Intermec 銷售代表。 Pour utiliser le CN51, il vous faut un pack de batterie 1015AB01. Les blocs-piles et les chargeurs de piles sont vendus et commandés séparément. Pour de l’assistance, contacter le représentant commercial Intermec de votre région. Um das CN51 verwenden, benötigen Sie einen 1015AB01 Akku. Akkusätze und Akkuladegeräte müssen separat gekauft und bestellt werden. Hilfestellungen erhalten Sie von Ihrem Intermec-Vertreter. Untuk menggunakan CN51, Anda memerlukan baterai 1015AB01. Set baterai dan pengisi baterai dijual dan dipesan secara terpisah. Untuk bantuan, hubungi staf niaga Intermec. Per utilizzare il CN51, avete bisogno di un 1015AB01 batteria. La batteria imballa ed i caricabatterie sono venduti esclusivamente ed ordinati. Per aiuto, metta in contatto con il vostro rappresentante di Intermec. CN51을 사용하려면, 당신은 1015AB01 배터리 팩이 필요합니다. 배터리 팩 및 배터리 충전기는 별도로 판매 및 지시합니다. 도움을 Intermec 영업 담당자에게 문의하십시오. Para usar o CN51, você precisa de uma bateria 1015AB01. As baterias e os carregadores de bateria são solicitados e vendidos separadamente. Para obter ajuda, entre em contato com o representante de vendas da Intermec. Дëя иñïîëüзîâàíия CN51, íåîбхîäиìî 1015AB01 àêêóìóëяòîðà. Бàòàðåéíûå иñòîчíиêи ïиòàíия и зàðяäíûå óñòðîéñòâà ê íиì зàêàзûâàþòñя и ïðîäàþòñя îòäåëüíî. Зà äîïîëíиòåëüíîé иíфîðìàциåé îбðàòиòåñü ê òîðгîâîìó ïðåäñòàâиòåëþ Intermec. Para utilizar el CN51, necesita una batería 1015AB01. Las baterías y cargadores de baterías se venden y piden por separado. Para obtenerayuda, diríjase al representante de ventas de Intermec. ที่จะใช้ CN51 คุณต้องแพ็คแบตเตอรี่ 1015AB01 แพ็คแบตเตอรี่และเครื่องชาร์จแบตเตอรี่มีการขายและสั่งซื้อ แยก สําาหรับความช่วยเหลือให้ติดต่อตัวแทนของคุณ Intermec ขาย CN51 kullanmak için, bir 1015AB01 pil gerekir. Pil takımları ve pil şarj aletleri ayrı olarak satılır ve sipariş edilir. Yardım için, Intermec satış temsilcinizle iletişime geçin. Caution: See Compliance Insert for use restrictions associated with this product. 警告：有关本产品相关的使用限制，请参阅“符合性插页”。 警告：請參見規範插頁中有關本產品使用限制方面的說明。 Attention: Consultez la Déclaration de conformité pour les restrictions d’usage associées à ce produit. Vorsicht: Das Konformitätsblatt führt etwaige Verwendungseinschränkungen für dieses Produkt an. Hati-hati: Bacalah Sisipan Kepatuhan tentang pembatasan pemakaian yang terkait dengan produk ini. Attenzione: Consultare l’inserto sulla conformità per informazioni sulle limitazioni d’uso di questo prodotto. 조: 본 제품과 관련된 사용 제한에 대한 자세한 내용은 준수 규정을 참조 하십시오. Cuidado: Consulte as informações sobre as restrições de uso associadas a este produto no encarte sobre conformidade. Острожно: Сì. îгðàíичåíия, ñâязàííûå ñ иñïîëüзîâàíиåì óñòðîéñòâà, íà âêëàäûшå ñ òðåбîâàíияìи ïî îбåñïåчåíиþ ñîîòâåòñòâия. Precaución: Consulte el Inserto de cumplimiento para ver las restricciones de uso asociadas con este producto. ข้อเตือน ดูการใส่เข้าสําาหรับการใช้ข้อจําากัดที่เกี่ยวข้องกับผลิตภัณฑ์น Dikkat: Bu ürünle ilgili kullanım kısıtlamaları için Uyumluluk Ek Sayfasına bakın. : למידע על הגבלות הקשורות למוצר זה, עיין בעלון התאימות.התראה For more information, see the CN51 Mobile Computer User Manual. 欲了解更多信息，请参阅 CN51 Mobile Computer User Manual . 欲了解更多信息，請參閱 CN51 Mobile Computer User Manual . Pour plus d’informations, consultez le CN51 Mobile Computer User Manual. Weitere Informationen finden Sie in der CN51 Mobile Computer User Manual. Untuk informasi lebih lanjut, lihat CN51 Mobile Computer User Manual. Per ulteriori informazioni, vedere la CN51 Mobile Computer User Manual. 자세한 내용은를 참조하십시오 CN51 Mobile Computer User Manual . Para mais informações, consulte o CN51 Mobile Computer User Manual. Дëя ïîëóчåíия äîïîëíиòåëüíîé иíфîðìàции ñì. CN51 Mobile Computer User Manual. Para obtener más información, consulte la …

Text truncated - open the document above for the full version.

CN 51 Mobile Computer For Windows Embedded Handheld 6.5 User’s Manual DRAFT Contents CN51 Mobile Computer User Manual - DRAFTi Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix About the Computer Features 1 About the CN51 Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 About Language Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Change the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Configure the Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About the Color-Coded Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 How to Capitalize Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . 14 How to Capitalize Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . 15 About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Configure the Screen Backlight Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 About the Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjust the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 About the Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Read Bar Codes with the Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connect a Bluetooth Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 DRAFT Contents iiCN51 Mobile Computer User Manual - DRAFT Insert a MicroSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 How to Transfer Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Set Up the Computer as a Mass Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 CN51 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 About the User Interface and Intermec Applications 25 About the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 About the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 About Screen Gestures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Title Bar Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Configure the Screen Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Calibrate the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 About Intermec Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Intermec Applications on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Downloadable Intermec Applications for the Computer . . . . . . . . . . . . . . . . . . . . . 32 About Features Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Abou…

Text truncated - open the document above for the full version.

WTD 13.4.9 FCC Compliance Opinion SGST0056 Information about the Applicant Grantee (Company Name) Intermec Technologies Corporation FCC Contact Person Dave Fry Address 550 Second St. SE City, State, Zip Cedar Rapids, IA 53401 Job Number SGST0056 Model 1015CP01 FCC ID EHA-1015CP01X1 Agent (Authorized Signatories) David Schramm of SGS Laboratories, Thorsten Liebig of Cinterion Approval Type Original Equipment Class NII Unlicensed National Information Infrastructure TX DTS Digital Transmission System Rule Part 15.247, 15.407 Overview This application is for the approval of Intermec Technologies’ model 1015CP01 (CN51) FCC ID: EHA-1015CP01X1. The CN51 is a handheld computer containing the Murata LBEH1Z9PFC radio module. The LBEH1Z9PFC module is an 802.11 b/g/n – Bluetooth radio. The Bluetooth and 802.11 radios share an antenna and cannot transmit simultaneously. SAR evaluation was performed and a report submitted that includes various holster configurations. Confidentiality requested for allowed files. Request is properly addressed and referenced. Short term confidentiality requested. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Greg Kiemel, TCB Committee 9/27/2013

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: EHA-1015CP01X1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential documents from public disclosure indefinitely. Schematic Diagrams Block Diagram Operational Description The above mentioned documents contain detailed system and equipment information that are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual Compliance Insert It is our understanding that all measurement test reports, FCC ID label format and correspondent during the certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best regards, Wayne F. Rieger Radio Compliance Engineer Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203-1264 425-267-2919 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

Date: June 12, 2013 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize, until further notice, David Schramm of SGS Laboratories, to act on my behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization maintains that Intermec Technologies Corporation remains responsible for all statements and exhibits in this application. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C., 853A. This authorization expires 12 months from todays date. Certified By: Dave Fry . Sr. EMC Engineer, i NARTE CE Intermec Technologies Corporation Dave Fry MS GR05 601 Third Street SE Cedar Rapids, IA 52401 Desk tel 319.369.3353 Lab tel 319.846.2415 Fax tel 319.846.2475 [email protected] 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

Date: June 12, 2013 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize, until further notice, Wayne Rieger of Intermec Technologies, to act on my behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization maintains that Intermec Technologies Corporation remains responsible for all statements and exhibits in this application. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C., 853A. . Certified By: Dave Fry . Sr. EMC Engineer, i NARTE CE Intermec Technologies Corporation Dave Fry MS GR05 601 Third Street SE Cedar Rapids, IA 52401 Desk tel 319.369.3353 Lab tel 319.846.2415 Fax tel 319.846.2475 [email protected] 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

XXX-YYYY XXXXX-XXX-XXX-XXX COA LABEL XXX-YYYY XXXXX-XXX-XXX-XXX COA LABEL

Radio Module Antenna

19.44 3.8 57.0 5.62 19.44 2X 1.4 Thru 41.9 3X 3.81 24.34 Release Liner for Adhesive Silk Screen Outline Preliminary REVISIONS REV.ECR#DESCRIPTION CHANGED BY/DATE APPROVED BY/DATE ParameterValue Customer Part Number805-685-001 Frequency2400-2480 MHz 4850-5900MHz Normal Impedance 50 : VSWR3.0:1 MFG. 1.6 EJR EMM00022-IT1MO Catalina WLAN Antenna APPL. MECH. PROJ. ENG . DRAWN BY DATE APPROVALS THIRD ANGLE PROJECTION TOLERANCES UNLESS OTHERWISE SPECIFIED INTERPRET DIMENSIONING AND TOLERANCING IN ACCORDANCE WITH ASME Y14.5M-2009 DO NOT SCALE DRAWING SCALE: 2:1PREVIOUS# SHEET 1 OF 1 REV DWG. NO. A4 SIZE TITLE: DIMENSIONS ARE IN MILLIMETERS ANGLE: 30' 0 PLACE DECIMAL: 0.5 1 PLACE DECIMAL: 0.25 2 PLACE DECIMAL: 0.13 SURFACE ROUGHNESS 6/13/2012 AA Mounting & Outline MATERIAL: FINISH: UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES. LAIRD TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPYRIGHT, LAIRD TECHNOLOGIES 2010, ALL RIGHTS RESERVED. MANCHESTER, NH 03103 USA The component(s), including any plating, finishes, coatings, chemicals and surfaces treatments, supplied in this document/drawing must conform and comply with the latest issue of Laird Technologies Specification LT-GES-001, which fully includes but is not limited to all contents of EU Directives 2002/95/EC (RoHS Directive), as well as includes requirements of the Joint Industry Guide standard JIG-101, April 2005. The component(s) in this document/drawing may be subject to a full compound analysis for proof of compliance. The latest issue of Laird Technologies Specification LT-GES-001, (General Specification for the Environment) is readily available upon request from the supplier.

Intermec RF Lab Antenna Measurement Report Manufacturer: Intermec Technologies Corp Product Name: CN51 Handheld Computer Model: 1015CP01 Configuration: 802.11abgn/Bluetooth Test Date: Feb 9, 2013 Prepared By: Oliver Ge Comments: 3-D views were provided in this report, corresponding to 2-D radiation patterns: Top View: Theta = 90 degree Left Sideview: Phi = 90 degree Front View: Phi = 0 degree Summary Frequency (MHz) 2400 2450 2500 4900 5000 Ant. Port Input Pwr. (dBm) 0 0 0 0 0 Efficiency (%) 47.3461 44.8873 35.2276 46.9078 46.2455 Gain (dBi) 2.93071 2.86303 2.0214 2.6551 3.21561 Upper Hem.Total Radiated Pwr (dBm) -2.98402 -3.48612 -5.16168 -2.35475 -2.40571 Lower Hem. Total Radiated Pwr(dBm) -3.52728 -3.47143 -3.9807 -4.47711 -4.55653 Average Gain (dB) -3.24716 -3.47877 -4.53117 -3.28755 -3.34931 Frequency (MHz) 5100 5150 5250 5350 5470 Ant. Port Input Pwr. (dBm) 0 0 0 0 0 Efficiency (%) 55.2369 39.7032 51.9208 27.1428 32.7539 Gain (dBi) 4.22176 2.83251 4.12988 1.2824 1.87403 Upper Hem.Total Radiated Pwr (dBm) -1.54035 -3.01206 -1.95561 -4.8896 -4.352 Lower Hem. Total Radiated Pwr(dBm) -3.9433 -5.31261 -3.96881 -6.60574 -5.40661 Average Gain (dB) -2.57771 -4.01175 -2.84659 -5.66345 -4.84737 Frequency (MHz) 5600 5725 5775 5825 Ant. Port Input Pwr. (dBm) 0 0 0 0 Efficiency (%) 30.5198 24.0289 41.1022 41.8316 Gain (dBi) 1.91169 0.549118 2.77945 2.38259 Upper Hem.Total Radiated Pwr (dBm) -4.88798 -6.35725 -4.21123 -4.22743 Lower Hem. Total Radiated Pwr(dBm) -5.43778 -6.03408 -3.53757 -3.38342 Average Gain (dB) -5.15419 -6.19266 -3.86135 -3.78495 Top View 2400MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 2400MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 2400MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 2450MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 2450MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 2450MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 2500MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 2500MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 2500MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 4900MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 4900MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = -90.0 Elevation = 90.0 Roll = 90.0 Front View 4900MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 5000MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 5000MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 5000MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 5100MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sdieview 5100MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 5100MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 5150MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 5150MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 5150MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 5250MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sdieview 5250MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Front View 5250MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Top View 5350MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Left Sideview 5350MHz EIRP (dBi) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Eleva…

Text truncated - open the document above for the full version.