EHA-1015CP01SX11015CP01S

1 CN51 Mobile Computer Compliance Insert Model 1015CP01S For Users in English-Speaking Regions (en) Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Battery, Charger, and Power Supply Information 802.11 Radio Precaution Statement Radiation Exposure Statement If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.00 cm (0.39 in) space between the device and the body. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. To find RF exposure information, go to www.intermec.com > Products > Computers > Handheld Computers > CN51 > Manuals tab, and then scroll down to Regulatory Information. For Users in the U.S.A. and Canada Imager and Camera Flash Compliance and Precaution The 1015CP01S is registered with the CDRH as a Class II LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-680 nm. This product complies with IEC 62471:2006-07 for LED safety. This product may use any of the following Intermec scan engines: •EA30 •EA31 To find Laser and Imager classification information for Intermec scan engines, go to www.intermec.com > Products > Computers > Handheld Computers > CN51 > Manuals tab, and then scroll down to Regulatory Information. The camera assembly with flash is classified as: Risk Category 2. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1015CP01S. Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Caution: For use with Intermec battery pack Model 1015AB01 only. See battery instructions. For power supply, use Intermec Model(s) 1015AV01, AE37, or AE36. No user-serviceable parts. Caution: The battery pack used with this product may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100 °C (212 °F). Do not short circuit; may cause burns. Keep away from children. Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation. Caution: When using the camera flash, keep the camera flash LED at least 317 mm (12.5 in) away from the subject’s eyes. Otherwise serious damage to one’s eyes may occur. Caution: There are no user serviceable parts inside the 1015CP01. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-680 nm. DRAFT 2 U.S.A. Digital Emissions Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the radio or television receiving antenna. •Increase the separation between the computer equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. •Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) Para usuarios en México, Centroamérica y Sudamérica - Excepto Brasil (es) Se advierte a los usuarios de este producto que usen accesorios y periféricos aprobados por Intermec Technologies Corporation. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no estén aprobados por Intermec Technologies Corporation, pueden anular el cumplimiento de este producto y ocasionar la pérdida de la autorización del usuario para operar el equipo. Información de batería, cargador o fuente de alimentación Declaración de precaución de radio 802.11 Declaración de exposición a la radiación Si un accesorio usado en el cuerpo no ha sido comprado a Intermec, el accesorio no deberá contener metal y deberá provee…

Text truncated - open the document above for the full version.

CN 51 Mobile Computer For Windows Embedded Handheld 6.5 User’s Manual DRAFT Contents CN51 Mobile Computer User Manual - DRAFTi Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix About the Computer Features 1 About the CN51 Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 About Language Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Change the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Configure the Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About the Color-Coded Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 How to Capitalize Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . 14 How to Capitalize Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . 15 About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 About the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Configure the Screen Backlight Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 About the Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjust the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 About the Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Read Bar Codes with the Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connect a Bluetooth Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 DRAFT Contents iiCN51 Mobile Computer User Manual - DRAFT Insert a MicroSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 How to Transfer Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Set Up the Computer as a Mass Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 CN51 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 About the User Interface and Intermec Applications 25 About the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 About the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 About Screen Gestures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Title Bar Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Configure the Screen Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Calibrate the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 About Intermec Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Intermec Applications on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Downloadable Intermec Applications for the Computer . . . . . . . . . . . . . . . . . . . . . 32 About Features Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Abou…

Text truncated - open the document above for the full version.

WTD 13.4.9 FCC Compliance Opinion SGST0058 Information about the Applicant Grantee (Company Name) Intermec Technologies Corporation FCC Contact Person Dave Fry Address 550 Second St. SE City, State, Zip Cedar Rapids, IA 53401 Job Number SGST0058 Model 1015CP01S FCC ID EHA-1015CP01SX1 Agent (Authorized Signatories) David Schramm of SGS Laboratories, Thorsten Liebig of Cinterion Approval Type Original Equipment Class PCE PCS Licensed Transmitter Held to ear DTS Digital Transmission System Rule Part 15.247, 22e, 24h Overview This application is for the approval of Intermec Technologies’ model 1015CP01S (CN51) FCC ID: EHA-1015CP01SX1. The CN51 is a handheld computer radio modules Cinterion pxs8 ( a CDMA/GSM/WCDMA radio) and a Murata LBEH59XUHC (802.11 b/g/n – Bluetooth radio). The Bluetooth and 802.11 radios share an antenna and cannot transmit simultaneously. The cellular radio can transmit simultaneously with either the 802.11 radio or the Bluetooth radio. SAR evaluation was performed and a report submitted for the various configurations. Confidentiality requested for allowed files. Request is properly addressed and referenced. Short term confidentiality requested. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Greg Kiemel, TCB Committee 9/9/2013

SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road, Suite 100, Suwanee, GA 30024 t (770) 570-1800 f (770) 277-8187 www.sgs.com/cts Member of the SGS Group (SGS SA) August 21, 2013 Telecommunication Certification Body (and/or) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Application for Original Certification, FCC ID: EHA-1015CP01SX1 Dear Application Examiner, Intermec Technologies Corporation is submitting this application for certification of model 1015CP01S (CN51), under FCC ID: EHA-1015CP01SX1. The device is a handheld computer containing radio modules: the Cinterion pxs8 (a CDMA/GSM/WCDMA radio) and the Murata LBEH59XUHC module (802.11 b/g/n -Bluetooth radio). System authorization is sought under FCC 22e, FCC 24h, and FCC 15.247. Internal and external photos for the device have been submitted with this application. Please note that brand names instead of model numbers are used in the some of the exhibits. The 802.11 and Bluetooth radios share their antenna and cannot transmit simultaneously. Cellular communication can be transmitted simultaneously with either Bluetooth or 802.11. A SAR evaluation was performed including analysis of 3 body worn holsters with 19mm minimum spacing. The antenna is integral to the handheld computer and is not user accessible, therefore compliant to FCC 15.203 unique antenna connector requirements. Your efforts in reviewing this application are greatly appreciated. Please contact me if there are questions or additional information needed concerning this request. Sincerely, David Schramm EMC Manager—SGS North America— Signing for: Intermec Technologies Corporation tel 770-570-1819 620 Old Peachtree Rd NW Suite 100 Suwanee GA 30024

Date: July 25, 2013 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize Thorsten Liebig of Cinterion to act on my behalf only for signing the Request for Confidentiality for the filing FCC ID: EHA-1015CP01SX1. The exhibits being held confidential are the intellectual property of Cinterion. This authorization is limited to only the signing of the Request for Confidentiality letter. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C., 853A. This authorization expires 12 months from todays date. Certified By: Dave Fry . Sr. EMC Engineer, i NARTE CE Intermec Technologies Corporation Dave Fry MS GR05 601 Third Street SE Cedar Rapids, IA 52401 Desk tel 319.369.3353 Lab tel 319.846.2415 Fax tel 319.846.2475 [email protected] 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

January 18, 2013 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize David Schramm of SGS Laboratories, to act on my behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization maintains that Intermec Technologies Corporation remains responsible for all statements and exhibits in this application. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C., 853A. This authorization expires in 12 months. Certified By: Dave Fry . Sr. EMC Engineer, | || | NARTE CE Intermec Technologies Corporation Dave Fry MS GR05 550 Second Street Cedar Rapids, IA 52401 Desk tel 319.369.3353 Lab tel 319.846.2415 Fax tel 319.846.2475 [email protected] 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

gemalto)< Gemalto M2M GmbH· Siemensdamm 50 • 13629 Berlin • Genmany Federal Communications Commission Name Thorsten Liebig 7435 Oakland Mills Road Department System Test - Approvals Columbia MD 21046 Phone +493031102-8241 Fax +49 30 31102-8305 E-Mail [email protected] Your letter of Our reference Berlin, August 8 th , 2013 Subject: Confidentiality Request; Certification Application FCCID: EHA-1 015CP01 SX1 Oear Sir or Madam, Pursuant to Sections 0.457 and 0.459 of CFR 47 Gemalto M2M GmbH request that the following information, provided to support the FCC application for equipment Intermec CN51, FCC 10: EHA­ 1 015CP01 SX1, be held permanently confidential on behalf of Intermec Technologies: Schematic PXSB schematicl1 Number of pages per file 12 Block Diagram PXSB_block_ diagram/1 Number of pages per file 1 Operational PXSB_ operationaL description/1 Number of pages per file 115 Description Tune up PXSB_ tune_ up'yrocedure/1 Number ofpages per file 1 The above material eontains trade seerets not eustomarily released to publie that are judged to have the potential to eause detriment 10 the app/ieant and provide unjustified to its eompetitors. This information should not be avai/able for publie disclosure for an indefinite period of time. With best regards Gemalto M2M GmbH / ]tY1-~,b" Thorsten Liebig Manager Approvals Berlin : August 8 th , 2013 www.gemalto.com/m2m Registered Office : Managing Directors: Commercial register, Reg. No.: Gemalto M2M GmbH N orbert Muhrer, Sebastien Gallois Amtsgericht München, HRB 17271 5 SI. ·Martin-Str. 60 WEE E· Reg.-Nr. DE 58893809 8 1 541 Munict1 Germeny

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: EHA-1015CP01SX1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential documents from public disclosure indefinitely. Schematic Diagrams Block Diagram Operational Description Tune-Up Procedure The above mentioned documents contain detailed system and equipment information that are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual Compliance Insert It is our understanding that all measurement test reports, FCC ID label format and correspondent during the certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best regards, Wayne F. Rieger Radio Compliance Engineer Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203-1264 425-267-2919 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

Cellular Radio Module 802.11/BT Radio Module 802.11/BT antenna Cellular antenna

. Cellular Radio Module 802.11/BT Radio Module 802.11/BT antenna Cellular antenna

Intermec RF Lab Antenna Measurement Report Manufacturer: Intermec Model: CN51 1015CP01S & 1015CP01U Serial Number: WLAN BGN/BT Antenna Prepared By: Intermec RF Lab Antenna Type: PIFA Comments: Three 3-D views in this report correspond to 2-D radiation views: Top View – Theta = 90 degree Side View – Phi = 90 degree Front View – Phi = 0 degree Summary Note: Summary sheet were average data taken from multiple samples, provided by antenna vendor. Frequency (MHz) Efficiency (%) Max Gain (dBi) 2400 38 1.64 2420 40 2.47 2450 39 3.24 2470 37 3.41 2480 36 3.28 2500 34 3.02 3-D Radiation Views Note: antenna port input power is 0dBm. Top View 2400MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Front View 2400MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Left Sideview 2400MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Top View 2450MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Front View 2450MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Left Sideview 2450MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0 Top View 2500MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 X YZ Azimuth = 90.0 Elevation = 0.0 Roll = 0.0 Front View 2500MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y Z X Azimuth = 90.0 Elevation = 0.0 Roll = -90.0 Left Sideview 2500MHz EIRP (dBm) -30 5 -25 -20 -15 -10 -5 0 Y X Z Azimuth = 90.0 Elevation = 90.0 Roll = -90.0

Intermec RF Lab Antenna Measurement Report Manufacturer: Intermec Model: WWAN Antenna for CN51 1015CP01S Serial Number: FCC Sample 1 Prepared By: Oliver Ge Antenna Type: PIFA Comments: Three 3-D views in this report correspond to 2-D radiation views: Top View – Theta = 90 degree Side View – Phi = 90 degree Front View – Phi = 0 degree Summary Note: Summary sheet were average data taken from multiple samples, provided by antenna vendor. Frequency (MHz) Efficiency (%) Max Gain Frequency (MHz) Efficiency (%) Max Gain 824 53 0.44 1900 61 2.25 836 54 0.49 1930 60 2.19 849 56 0.55 1950 60 2.25 854 51 0.2 1970 59 2.17 869 48 -0.25 1990 58 2.07 880 42 -0.65 2000 58 2.01 894 34 -1.64 2050 58 2.12 1710 58 1.25 2070 58 2.07 1730 60 1.53 2100 55 1.75 1750 58 1.57 2130 55 1.77 1780 51 1.07 2170 58 2.03 1805 51 1.11 1815 48 0.74 1820 48 0.91 1835 50 1.16 1850 51 1.42 1860 53 1.54 1880 57 1.89

57.0 19.44 19.44 2X 1.40 Thru 5.62 24.34 3X 3.81 41.9 Release Liner And Adhesive Degate material +/- 0.1 from edge Preliminary REVISIONS REV.ECR#DESCRIPTION CHANGED BY/DATE APPROVED BY/DATE ParameterValue Customer Part Number805-683-001 Frequency826-894 MHz 1710-2170MHz Normal Impedance 50 : VSWR3.0:1 MFG. 1.6 EJR EMM00019-IT1MO Catalina Universal WAN Antenna APPL. MECH. PROJ. ENG . DRAWN BY DATE APPROVALS THIRD ANGLE PROJECTION TOLERANCES UNLESS OTHERWISE SPECIFIED INTERPRET DIMENSIONING AND TOLERANCING IN ACCORDANCE WITH ASME Y14.5M-2009 DO NOT SCALE DRAWING SCALE: 2:1PREVIOUS# SHEET 1 OF 1 REV DWG. NO. A4 SIZE TITLE: DIMENSIONS ARE IN MILLIMETERS ANGLE: 30' 0 PLACE DECIMAL: 0.5 1 PLACE DECIMAL: 0.25 2 PLACE DECIMAL: 0.13 SURFACE ROUGHNESS 6/12/2012 AA Mounting & Outline MATERIAL: FINISH: UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS LAIRD TECHNOLOGIES CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE OR TRANSMITTAL OF ALL OR ANY PART OF THIS DOCUMENT IS PROHIBITED EXCEPT TO THE EXTENT APPROVED IN WRITING BY AN AUTHORIZED REPRESENTATIVE OF LAIRD TECHNOLOGIES. LAIRD TECHNOLOGIES RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPY RIGHTS AND TRADE SECRETS. COPYRIGHT, LAIRD TECHNOLOGIES 2010, ALL RIGHTS RESERVED. MANCHESTER, NH 03103 USA The component(s), including any plating, finishes, coatings, chemicals and surfaces treatments, supplied in this document/drawing must conform and comply with the latest issue of Laird Technologies Specification LT-GES-001, which fully includes but is not limited to all contents of EU Directives 2002/95/EC (RoHS Directive), as well as includes requirements of the Joint Industry Guide standard JIG-101, April 2005. The component(s) in this document/drawing may be subject to a full compound analysis for proof of compliance. The latest issue of Laird Technologies Specification LT-GES-001, (General Specification for the Environment) is readily available upon request from the supplier.

Date/Time: 6/21/2013 2:42:25 PM Test Laboratory: SGS North America 1 BSL,GSM850 ,GMSK Voice, Mid ch190, 836.6MHz, B1 P1 DUT: Intermec Catalina Handheld PC Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.191 dB; PMF: 2.88104 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.94 mho/m; ε r = 54.649; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration: • Probe: EX3DV4 - SN3812; ConvF(9.13, 9.13, 9.13); Calibrated: 12/12/2012; • Sensor-Surface: 4mm (Mechanical Surface Detection), z = -3.0, 31.0 • Electronics: DAE4 Sn1287; Calibrated: 10/4/2011 • Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1146 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B1, P1/Area Scan (91x181x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.0949 mW/g Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B1, P1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.006 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.110 mW/g SAR(1 g) = 0.091 mW/g; SAR(10 g) = 0.070 mW/g (SAR corrected for target medium) Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0936 mW/g Date/Time: 6/21/2013 3:27:00 PM Test Laboratory: SGS North America 2 BSL,GSM850 ,GMSK Voice, Mid ch190, 836.6MHz, B1 P2 DUT: Intermec Catalina Handheld PC Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.191 dB; PMF: 2.88104 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.94 mho/m; ε r = 54.649; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration: • Probe: EX3DV4 - SN3812; ConvF(9.13, 9.13, 9.13); Calibrated: 12/12/2012; • Sensor-Surface: 4mm (Mechanical Surface Detection), z = -3.0, 31.0 • Electronics: DAE4 Sn1287; Calibrated: 10/4/2011 • Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1146 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B1, P2/Area Scan (91x181x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.0650 mW/g Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B1, P2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.507 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.076 mW/g SAR(1 g) = 0.062 mW/g; SAR(10 g) = 0.048 mW/g (SAR corrected for target medium) Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0641 mW/g Date/Time: 6/22/2013 1:22:19 PM Test Laboratory: SGS North America 3 BSL,GSM850 ,GMSK Voice, Mid ch190, 836.6MHz, B2 P1 DUT: Intermec Catalina Handheld PC Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.191 dB; PMF: 2.88104 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.944 mho/m; ε r = 54.497; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration: • Probe: EX3DV4 - SN3812; ConvF(9.13, 9.13, 9.13); Calibrated: 12/12/2012; • Sensor-Surface: 4mm (Mechanical Surface Detection), z = -3.0, 31.0 • Electronics: DAE4 Sn1287; Calibrated: 10/4/2011 • Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1146 • DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B2, P1/Area Scan (41x181x1): Measurement grid: dx=10mm, dy=10mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.132 mW/g Configuration/Body, 850GSM, GSMK, Mid Ch 190, 836.6MHz, B2, P1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.631 V/m; Power Drift = -0.24 dB Peak SAR (extrapolated) = 0.194 mW/g SAR(1 g) = 0.122 mW/g; SAR(10 g) = 0.078 mW/g (SAR corrected for target medium) Info: Int…

Text truncated - open the document above for the full version.