EHA-BTM312BTM312

1 CV30 Fixed Vehicle Mount Computer Compliance Insert General and Safety Related Information for all Regions Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Battery Recycling Information Renseignements generaux et relatifs a la securite pour toutes les regions Les utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation. L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu’a l’usager d’utiliser l'équipement. Informations pour le recyclage de la pile Allgemeine und sicherheitsbezogene Informationen für alle Regionen Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren. . Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Caution: Power supply usage is determined by countries or regions. Intermec Models 9004AE03, AE10, or 851-070-001 must be used in Australia, Canada, the EU, New Zealand and the USA. Any of the following Intermec Model power supplies may be used outside of these regions: Model AE30, 9004AE03, Model 073573, AE10, or 851-070-001. No user-serviceable parts. Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100 °C (212 °F). Do not short circuit; may cause burns. Keep away from children. The backup battery is intended to be replaced only by a trained service person using Intermec’s Model AB5 battery. Li-ionLi-ion This product contains or uses a lithium ion (Li-ion) battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. Note: In the U.S.A., the EPA does not consider spent Li-ion batteries as hazardous waste. Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse. Attention: Le bloc d’alimentation à utiliser est déterminé en fonction du pays ou de la région. Le modèle 9004AE03, AE10, oe 851- 070-001 doit être utilisé en Australie, au Canada, dans l’UE, en Nouvelle-Zélande et aux États-Unis. N’importe lequel des modèles de blocs d’alimentation Intermec suivants peut être utilisé à l’extérieur de ces régions : modèle AE30, 9004AE03, modèle 073573, AE10, oe 851-070-001. Aucune pièce réparable par l’utilisateur. Attention: Le bloc-piles utilisé dans cet appareil peut prendre feu, constituer un risque de brûlure chimique, exploser ou dégager des substances toxiques s’il est manipulé de façon inappropriée. Ne pas jeter au feu, démonter ou chauffer à plus de 100 °C (212 °F). Ne pas court-circuiter; cela pourrait causer des brûlures. Garder hors de la portée des enfants. La pile de secours ne doit être remplacée que par une personne compétente et doit être de modèle AB5. Li-ionLi-ion Ce produit contient ou utilise une pile principale au lithium-ion (Li-ion). Lorsque la batterie atteint la fin de sa durée de vie utile, la batterie usées doivent être mises aux rebuts par un agent de recyclage ou un manipulateur de matériaux dangereux agréé. Il ne faut pas mélanger la batterie aux autres déchets solides. Pour plus d’informations sur le recyclage ou la mise aux rebuts, contacter votre centre de services Intermec Technologies. Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll. Vorsicht: Das verwendete Netzteil hängt vom Land oder der Region ab. Intermec Modell 9004AE03 , AE10, oder 851-070-001 muss in Australien, Kanada, Neuseeland, in der EU und in den USA verwendet werden. Außerhalb dieser Regionen kann eines der folgenden Intermec-Netzteile verwendet werden: modell AE30, 9004AE03, modell 073573, AE10, oder 851-070-001. Enthält keine Teile, die vom Benutzer gewartet werden können. ME06 2 Informationen zum Recycling von Batterien Общая информация и информация о безопасности для всех регионов Пользователи этого продукта предупреждаются, что они должны использовать принадлежности и периферийные устройства, утвержденные Intermec Technologies Corporation. Использование принадлежностей, не являющихся рекомендованными, или внесение в этот продукт изменений, не утвержденных Intermec Technologies Corporation, может сделать продукт не соответствующим требованиям и привести к утрате пользователем права работать с данным оборудованием. Информация по утилизации батареек Información general y relacionada con la seguridad para todas las regiones Se advierte a los usuarios de este producto que usen accesorios y periféricos aprobados por Intermec Technologies Corporation. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no estén aprobados por Intermec Technologies Corporation, pueden anular el cumplimiento de este producto y ocasionar la pérdida de la autorización del usuario para operar el equipo. Información acerca…

Text truncated - open the document above for the full version.

1 Important BTM312 Bluetooth Radio Information! General and Safety Related Information for all Regions 适用于所有地区的一般信息及安全相关信息 所有區域的一般規定和安全相關資訊 Renseignements généraux et relatifs à la sécurité pour toutes les régions Allgemeine und sicherheitsbezogene Informationen für alle Regionen 전 지역 일반 정보와 안전 관련 정보 Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Caution: The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. 注意： 该标记指示在使用之前用户应阅读所有包含的文档。 请保留这份补充材料，以备日后参考。 注意： 敬告本产品的用户，请务必使用 Intermec Technologies Corporation 许可的附件和外围设备。 如果使用推荐附件之 外的其它附件，或未经 Intermec Technologies Corporation 许可而擅自改装本产品，都可能会使本产品的符合性无效，并 可能会导致用户失去操作本设备的权利。 注意：此標誌表示使用者應在使用前先閱讀所有隨附的文件。請保留這份補充材料，以備日後參考。 注意：本産品使用者注意，請使用經 Intermec Technologies Corporation 認可的配件和周旁設備。如果使用 Intermec Technologies Corporation 建議之外的配件，或未經其認可對本産品進行更改，可能會導致本産品的相容性無效，以及使用者無權操作設備。 Attention: Cette marque indique que l’utilisateur doit lire toute la documentation incluse avant l’utilisation. Conservez ce supplément pour référence future. Attention: Les utilisateurs de ce produit sont mis en garde contre l’utilisation d’accessoires et de périphériques qui ne sont pas approuvés par Intermec Technologies Corporation. L’utilisation d’accessoires autres que ceux recommandés, ou des modifications à ce produit qui ne sont pas approuvées par Intermec Technologies Corporation, peuvent annuler la conformité de ce produit et avoir comme résultat la perte de l’autorité de l’utilisateur à faire fonctionner l’équipement. Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll. Diese Ergänzung muss zur zukünftigen Bezugnahme aufgehoben werden. Vorsicht: Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren. 주의: 이 표시는 사용자가 제품을 사용하기 전에 포함된 모든 문서를 읽어야 함을 나타냅니다. 향후 참고를 위해 본 자료를 보관하십시오. 주의: Intermec Technologies Corporation에서 승인한 부속품 및 주변 기기를 사용하는 본 제품의 사용자는 주의를 기울 여야 합니다. 권장되지 않은 부속품을 사용하거나 Intermec Technologies Corporation의 승인 없이 본 제품을 변경할 경 우, 본 제품의 보증이 무효화되거나 장비 조작에 대한 사용자의 권한이 박탈될 수 있습니다. 2 Informações gerais e de segurança para todas as regiõesl Общая информация и информация о безопасности для всех регионов Información general y relacionada con la seguridad para todas las regiones Tüm Bölgeler için Genel ve Güvenliğe İlişkin Bilgiler EMC and RF Information for North and South America This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Radiation Exposure Statement Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. When installing and using this product, a 20-cm passing distance must be maintained from the body or head of the user or nearby persons and the antenna. The antenna must not be touched during transmitter operation. Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes de usar o produto. Guarde esse suplemento para referências futuras. Cuidado: Os usuários deste produto devem usar acessórios e periféricos aprovados pela Intermec Technologies Corporation. Usar acessórios não recomendados, ou fazer alterações neste produto não aprovadas pela Intermec Technologies Corporation, poderá anular a conformidade deste produto e resultar na perda da permissão do usuário de utilizar o equipamento. Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию, прежде чем начинать работу. Сохраните это дополнение для последующих справок. Осторожно: Пользователи этого изделия предупреждаются, что они должны использовать принадлежности и периферийные устройства, утвержденные Intermec Technologies Corporation. Использование принадлежностей, не являющихся рекомендованными, или внесение в это изделие изменений, не утвержденных Intermec Technologies Corporation, может сделать изделие не соответствующим требованиям и привести к утрате пользователем права использовать данное оборудование. Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso. Retenga este suplemento para referencia futura. Precaución: Se advierte a los usuarios de este producto que usen accesorios y periféricos aprobados por Intermec Technologies Corporation. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no sean aprobados por Intermec Technologies Corporation, pueden dejar nulo el cumplimiento de este producto y provocar la pérdida de la autoridad del usuario para operar el equipo. Dikkat: Bu işaret, kullanıcının dahil edilen tüm dökümantasyonları kullanım öncesinde okuması gerektiğini göstermektedir. Bu eki daha sonra başvurmak üzere muhafaza edin. Dikkat: Bu ürünün kullanıcıları, Intermec Technologies Corporation tarafından onaylanmış aksesuarları ve yan donanımları kullanma konusunda uyarılmaktadırlar. Önerilenin dışında aksesuar kullanımı ya da bu üründe Intermec Technologies Corporation'ın onaylamadığı ş…

Text truncated - open the document above for the full version.

CV30 Fixed Mount Computer With Windows CE User’s Manual iiCV30 Fixed Mount Computer With Windows CE User’s Manual Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior noticed and do not represent a commitment on the part of Intermec Technologies Corporation. © 2007 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. Contents CV30 Fixed Mount Computer With Windows CE User’s Manualiii Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix 1 Using the CV30 Fixed Mount Computer . . . . . . . . . . . . . . . . . . . . 1 Introducing the CV30 Fixed Mount Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Understanding the Features of the CV30 . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Using the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Magnifying a Portion of the Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Adjusting the Screen Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Navigating the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Aligning the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Attaching the CV30 to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Understanding the Backup Power System . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Resetting the CV30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using the Power Button to Reset the CV30 . . . . . . . . . . . . . . . . . 10 Using the Reset Button to Reset the CV30 . . . . . . . . . . . . . . . . . 10 Understanding the Status Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Installing an External Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing an External Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connecting a Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Increasing Memory Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contents ivCV30 Fixed Mount Computer With Windows CE User’s Manual 2 Understanding Windows CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Understanding Windows CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Finding Information in Windows CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Learning the Basic Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Using the Desktop Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Accessing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using the Taskbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using Pop-Up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Entering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Using Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Finding and Organizing Information . . . . . . . . . . . . . . . . . . . . . 23 Customizing the CV30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Northwest EMC TCB Compliance Opinion Rev. 7/1/10 INMC0726 Information about the Applicant Grantee (Company Name) Intermec Technologies Corporation FCC Contact Person Dave Fry Address 6001 36th Avenue West City, State, Zip Everett, WA 98203-1264 Job Number INMC0726 Model BTM312 FCC ID EHA-BTM312 Agent Sean MacKellar Approval Type Original Equipment Class DTS Digital Transmission System Rule Part 15.247 (15C) Overview Intermec Technologies Corporation is submitting this application for the original modular approval of Blue Tooth Module, model BTM312, FCC ID: EHA-BTM312. Confidentiality requested for allowed files. Request is properly addressed and referenced. A letter listing the applicable modular requirements was submitted. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Dave Tolman, TCB Committee 10/24/2011

Date: December 20, 2007 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize, until further notice, Sean MacKellar of Intermec Technologies, to act on my behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization maintains that Intermec Technologies Corporation remains responsible for all statements and exhibits in this application. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 853A. Certified By: Dave Fry Sr. EMC Engineer 550 Second Street Cedar Rapids, IA 52401 Dave Fry MS GR05 Sr. EMC Engineer tel 319.846.2415 fax 319.846.2475 [email protected] www.intermec.com

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 September 21, 2011 Dear Application Examiner: Intermec Technologies Corporation is seeking modular approval of their Model BTM312 radio, FCC ID: EHA-BTM312. The radio meets the requirements for modular approval as detailed in FCC 15.212. Compliance to each of the requirements is described below: 1. “The modular transmitter must have its own RF shielding.” The radio portion of the module is contained in its own RF shielding. The shielding is installed at the factory. Please see the Internal Photos exhibit. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs to insure compliance with Part 15 requirements under conditions of excessive data rates or over-modulation. Please see the Schematics exhibit. 3. “The modular transmitter must have its own power supply regulation.” The EUT has its own power supply regulation to insure compliance with Part 15 requirements regardless of the quality or level of external DC supplying the module from the host unit. Please see Schematics exhibit. Also, the technical report exhibit contains AC power line conducted emissions data taken with the EUT powered from a linear power supply that contains no EMC suppression components. 4. “The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c).” The EUT meets the FCC antenna requirements. Please see Antenna information exhibit and internal photos exhibit. 5. “The modular transmitter must be tested in a stand-alone configuration.” The EUT was tested in a stand-alone configuration. The module was greater than 10 cm from the host device. Please see test setup photos exhibit and technical report exhibit. 6. “The modular transmitter must be labeled with its own FCC ID number.” The EUT is labeled with its own FCC ID number. Please see FCC ID label & location exhibit. Since the FCC ID number will not be visible when the module is installed inside a host device, another label with the FCC ID will be applied to the exterior of the host device. 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the User Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. Please see RF Exposure Exhibit. Please contact me if you have additional questions. Your attention to this matter is greatly appreciated. Best regards, Sean MacKellar Compliance Engineer Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203-1264 425-356-1765

September 21, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459, the documents listed below and attached with this application for certification be provided with confidential status. • Schematics.pdf • Operational Description.pdf • Frequency Block Diagrams.pdf Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Sean MacKellar Sr. Compliance Engineer Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203-1264 425-267-2923 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

BTM312 External Photos

BTM312 Label Location 1 234-102-p022 1 0 1 DWG REV PRE 1 A BC D ROTATION: DRAWING NUMBER Everett, Wa 6001 36Th Avenue West 4/1 CAGE CODE BTM312-BCSP SIZE 33825 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB --- .1 .01 0.5 DEG .005 .005 2 Tue Sep 27, 2011 At 10:29:53AM Y:\cadence\data\prel\design_145_522_002_prel 2 SEE ECN FOR 145-522-002APPROVALS Sep 27, 2011 Dan Warren APPROVALS SEE SEPARATE PARTS LIST 11 A B C D 11 PLACE LABEL INDICATING THE FOLLOWING DATA IN AREA INDICATED IN AREA SHOWN. 10 PLACE LABEL INDICATING VALUE OF MAX POWER SETTING USED FOR BLUETOOTH TEST 9 PLACE LABEL INDICATING MAC ADDRESS IN AREA SHOWN. 8 INSTALL R21 AFTER COMPLETION/PASSING OF BLUETOOTH TESTING USING IC : 1223A-BTM312 F CC ID: EHA-BTM312 885-086-001(SERIAL NUMBER)BTM312INTERMEC TECHNOLOGY IN AREA SHOWN. AUTOMATED TEST STATION. 6 6 5 5 4 4 8 MANUFACTURING AND REPRODUCTION RIGHTS THERETO.CORPORATION RESERVES ALL PATENT, PROPRIETARY, DESIGN, USE, SALE,NOT BE DISCLOSED OR DISSEMINATED WHOLE OR IN PART. INTERMEC TECHNOLOGIES FOR RIGHTS EXPRESSLY GRANTED BY WRITTEN CONSENT, SUCH INFORMATION SHALL BY AND IS THE PROPERTY OF INTERMEC TECHNOLOGIES CORPORATION AND EXCEPT THAT FOR WHICH PROVIDED. THE INFORMATION DISCLOSED HEREIN ORIGINATEDTHIS DRAWING SHALL NOT BE DUPLICATED OR USED FOR ANY PURPOSE OTHER THAN 9 NOTICE 10 3 3 PRE-RELEASE DRAWING STATUS ANGLES .XXX CAD DATA .X .XX ARE IN INCHES DATE PRINTED: SPECIFIED ,DIM.UNLESS OTHERWISE CAD DB.REF: C35 U6U6U6 C52 C41 C25 R1 C29 C3 C40 R8 R9 R20 C24 C51 R10 U1 C10 R4 R7 C8 C7 L3 L6L7 C26 C28 Y1 R3 C27 L2 C14 C22 C20 L5 C9 L1 Q1 T1 C18 C34 C49 C47 C17 R6 C15 C45 R18 R19 U3 C44 C43 U5 C48 C19 U4 R16 C46 C23 C42 C32 C33 L11 C16 L4 R21 C21 U2 7 INSTALL METAL SHIELD AS SHOWN PER DETAIL A. SOLDER EDGES OF SHIELD 6 L4 AND L11 TO BE INSTALLED BROWN COLORED SIDE UP. 5. MATERIAL TRACEABILITY REQUIREMENTS APPLY PER INTERMEC MATERIALS 4. CHANGES REQUIRE SAC APPROVAL. 3. THIS PART OR ASSEMBLY MUST CONFORM TO INTERMEC DOCUMENT 631869, INTERMEC 2. MARK COUNTRY OF ORIGIN ASSEMBLY MANUFACTURE IDENTIFICATION 1. REFERENCE INTERMEC DOCUMENT 630678 FOR ASSEMBLY MARKING EOS /ESD NOTES: TO PCB IN AREA INDICATED.TRACEABILITY REQUIREMENTS DOCUMENT 609813, PARAGRAPH 4.5.RESTRICTED SUBSTANCES COMPLIANCE REQUIREMENTS, MOST CURRENT REVISION. ON BOARD ASSEMBLY PER INTERMEC DOCUMENT 609030, MOST CURRENT REVISION. WITHIN MOST CURRENT REVISIONS. SUBSTANCES COMPLIANCE MARKING, AND ALL REFERENCED SPECIFICATIONS HANDLING, PACKAGING, IPC ASSEMBLY REQUIREMENTS, INTERMEC RESTRICTED

BTM312 Internal Photos

notice_e-01 Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore pr actical application or usage of the Products. Ple ase note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo- rati ng such products, which are caused under the conditions other than those specified in this catalog or individual spec ification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is avai lable. Please conduct validation and verification of products in actual condition of mounting and operating environment befor e commercial shipment of the equipment. Al l electronic components or functional modules listed in this catalog are developed, designed and intended for use i n general electronics equipment.(for AV, office automation, household, office supply, information service, tel e communications, (su ch as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disa ster prevention, medical, public information network (telephone exchange, base station) etc. which may have dire ct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do n ot incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma- rine s ystem, military, etc. where higher safety and reliability are especially required. In a ddition, even electronic components or functional modules that are used for the general electronic equipment, if th e equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil- ity e valuation check for safety shall be performed before commercial shipment and moreover, due consideration to inst all a protective circuit is strongly recommended at customer's design stage. Th e contents of this catalog are applicable to the products which are purchased from our sales offices or distribu- tors ( so called TAIY O YUDENs official sales channel). It is only applicable to the products purchased from any of TAIYO YUDEN s offic ial sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc- cur i n connection with a third party's intellectual property rights and other related rights arising from your usage of prod ucts in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Ca ution for export Cer tain items in this catalog may require specific procedures for export according to Fore ign Exchange and For- eign Trade Control Law of J apan, U.S. Export Administration Regulations, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 158 chipantenna01_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ PART NUMBERS ■ APPLICATIONS AH 212M Type, AF 216M Type, AF 816M Type, AF 116M Type A…

Text truncated - open the document above for the full version.