EHA-INRD01URFID UHF Module

INRD01u RFID HW GUI User Manual Version 1.0 RFID HW GUI User Manual - 2 - Apr 26, 2011 History： ：： ： Version Description Time 1.0 Release 2010.12.08 2.0 Revised for Compliance Submission 2011.04.19 All information and copyright are owned by their respective owners, which are not illustrated or referenced. The respective owners are informed of such document and agreed to is intended use.. RFID HW GUI User Manual - 3 - Apr 26, 2011 Index 1. GETTING STARTED ............................................................................................................................................................... 4 1 11 1.1. .1..1. .1. INTRODUCTION .................................................................................................................................................................. 4 2. INITIAL SETUP ........................................................................................................................................................................ 5 2.1. 2.1.2.1. 2.1. SOFTWARE INSTALLATION ................................................................................................................................................ 5 2.2. 2.2.2.2. 2.2. HARDWARE SETUP ........................................................................................................................................................... 8 3. READER SETTINGS ............................................................................................................................................................... 9 3.1. 3.1.3.1. 3.1. INTRODUCTION .................................................................................................................................................................. 9 3.2. 3.2.3.2. 3.2. ADVANCED READER SETTINGS ...................................................................................................................................... 10 4. INVENTORY RUN ................................................................................................................................................................. 14 5. TAG SETTING ....................................................................................................................................................................... 15 5.1. 5.1.5.1. 5.1. TAG SETTING FUNCTION ................................................................................................................................................. 16 5.2. 5.2.5.2. 5.2. MEMORY BANK SETTING ................................................................................................................................................ 19 6. TROUBLESHOOTING/ FAQS ............................................................................................................................................. 22 6.1. 6.1.6.1. 6.1. INITIAL SETUP/ SOFTWARE ............................................................................................................................................. 22 6.2. 6.2.6.2. 6.2. TAG READING .................................................................................................................................................................. 22 6.3. 6.3.6.3. 6.3. TAG MODIFICATION ......................................................................................................................................................... 22 7. CAUTION AND WARNINGS ................................................................................................................................................ 23 RFID HW GUI User Manual - 4 - Apr 26, 2011 1. Getting Started 1.1. 1.1.1.1. 1.1. Introduction This manual provides you with the information needed to install and operate the MTI RFID ME TM HW GUI. After installing the software, a description on how to install the RFID ME TM HW (“Dongle”). Section 3, presents information on how to configure the RFID ME TM HW to read and write tags and discusses advanced RFID configuration settings. Section 4 describes reading tags (scanning and inventory runs). Section 5 presents information on Advanced Tag Settings including changing EPC, Kill, Lock and advanced feature settings for setting tags that us NXP’s G2iL+ chips. Reference Appendix A for RFID ME TM HW Technical Data Sheet. RFID HW GUI User Manual - 5 - Apr 26, 2011 2. Initial Setup 2.1. 2.1.2.1. 2.1. Software Installation 2.1.1. Double-click “MTI RFID ME TM HW GUI.exe” in the installation disk, then click “Next” to continue the installation, or click “Cancel” to exit the setup as shown in Figure 1. Figure 1 2.1.2. Read the license agreement, and if acceptable select “I accept the agreement” as shown in Figure 2. Figure 2 RFID HW GUI User Manual - 6 - Apr 26, 2011 2.1.3. Select a Destination Folder. To select a different folder, click “Browse” and choose one of the available options as shown in Figure 3. Figure 3 2.1.4. Select a destination for the program’s shortcut to appear. To select a different folder, click “Browse” and choose one of the available options as shown in Figure 4. Figure 4 RFID HW GUI User Manual - 7 - Apr 26, 2011 2.1.5. To add additional icons, “Check” the desired boxes as shown in Figure 5. Figure 5
“Checking” the ‘Create a desktop icon’ will generate an additional desktop icon;
“Checking” the ‘Create a Quick Launch icon’ will generate an Additional Quick Launch icon located in the “Start” menu. 2.1.6. Press “Install” to begin software installation as shown in Figure 6. Figure 6 RFID HW GUI User Manual - 8 - Apr 26, 2011 2.1.7. Congratulations! You have completed the RU-888-100 software installation. Press “Finish” to close the window. Select any of the installed icons to launch the MTI Reader Suite program as shown in Figure 7. Figure 7 2.2. 2.2.2.2. 2.2. Hardware Setup Insert USB dongle into the USB port, open the installed program, and make sure the status/state reads “Online” as shown in Figure 8. Figure 8 RFID HW GUI User Ma…

Text truncated - open the document above for the full version.

Date: 2011/03/25 FCC ID: EHA-INRD01U Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Kian Meng Lim / Engineer Intermec Technologies Corporation 550 Second Street SE Cedar Rapids Iowa 52401-2029 USA

Agency Authorization Letter Date: 2011/03/25 FCC ID: EHA-INRD01U To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire six months from the original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Kian Meng Lim / Engineer Intermec Technologies Corporation 550 Second Street SE Cedar Rapids Iowa 52401-2029 USA

Date: December 9, 2010 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To whom it may concern, Agent’s Authorization Letter I, named contact of grantee for Intermec Technologies Corporation, do hereby authorize, until further notice, Kain Meng Lim of Intermec Technologies, to act on my behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization maintains that Intermec Technologies Corporation remains responsible for all statements and exhibits in this application. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 853A. Certified By: Dave Fry Sr. EMC Engineer Intermec Technologies Corporation Dave Fry MS GR05 550 Second Street Cedar Rapids, IA 52401 Desk tel 319.369.3353 Lab tel 319.846.2415 Fax tel 319.846.2475 [email protected] 6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.355.9551 www.intermec.com

FCC ID: EHA-INRD01U Report No.: RF991220C05 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch April 25, 2011 Dear Application Examiner, Intermec Technologies Corporation, It’s an RFID UHF Module, FCC ID: EHA-INRD01U would like to have your authorization as a modular device. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in AS3992. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is LTC3412 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via an USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was connected with this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: EHA-INRD01U Report No.: RF991220C05 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Gary Chang Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Made in China Model: INRD01u 5.5V, 1.0A IC: 1223A-INRD01U FCC ID: EHA-INRD01U

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

FCC ID: EHA-INRD01U Report No.: RF991220C05 Operational Description The transmitter of the RFID UHF module is powered by 5Vdc host equipment. The module is using low power RF transmission for proximity reading range. PR-ASK modulation can be transmitted through Microstripe antenna "Coupler" with MMCX (F) antenna connector. The other instruction, please have a look at the users manual.

Report No: SA991220C05 1 Report Format Version 4.0.0 RF EXPOSURE REPORT REPORT NO.: SA991220C05 MODEL NO.: INRD01u FCC ID: EHA-INRD01U ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Intermec Technologies Corporation ADDRESS: 550 Second street SE Cedar Rapids Iowa 52401-2029 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 5 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval, or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No: SA991220C05 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. RF EXPOSURE............................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)...................................... 5 2.2 MPE CALCULATION FORMULA ................................................................................. 5 2.3 CLASSIFICATION ........................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER............................... 5 Report No: SA991220C05 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Apr. 11, 2011 Report No: SA991220C05 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: RFID UHF Module BRAND: Intermec MODEL NO.: INRD01u APPLICANT: Intermec Technologies Corporation TESTED: Dec. 31, 2010 ~ Jan. 05, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Guidelines for Human Exposure IEEE C95.1 The above equipment (Model: INRD01u) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Apr. 11, 2011 Andrea Hsia / Specialist APPROVED BY : , DATE :Apr. 11, 2011 Gary Chang / Assistant Manager Report No: SA991220C05 5 Report Format Version 4.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 902.75 - 927.25 23.84 -18.31 20 0.001 1.00

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST TEST MODE A 2 3 TEST MODE B 4 5 RADIATED EMISSION TEST TEST MODE A 6 7 TEST MODE B 8