EHA-WUBB802.11g portable printer

PB50 Portable Label Printer User’s Guide iiPB50 Portable Label Printer User’s Guide Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior noticed and do not represent a commitment on the part of Intermec Technologies Corporation. © 2007 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. Contents PB50 Portable Label Printer User’s Guideiii Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Service Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi 1 Using the PB50 Portable Label Printer. . . . . . . . . . . . . . . . . . . . . . 1 Learning About the PB50 Portable Label Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Identifying the Parts of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Understanding the Printer Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Understanding the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Understanding the Printer Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Understanding the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Charging the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Understanding the Battery Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Extending Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Loading Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Printing a Test Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2 Configuring the PB50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Configuring the PB50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Understanding the Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Understanding Ready Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Understanding Information Mode . . . . . . . . . . . . . . . . . . . . . . . . 16 Understanding Pause Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Understanding Setup Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Understanding Error Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Understanding Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Changing Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Changing the Configuration Settings From the Display. . . . . . . . 21 Changing the Configuration Settings from PrintSet . . . . . . . . . . . 23 Contents ivPB50 Portable Label Printer User’s Guide Changing the Configuration Settings Using the Command Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Changing Configuration Settings from the Printer Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Changing Configuration Settings from SmartSystems Console . . 24 Establishing Communications With a Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Setting Up Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Setting Up 802.11 Radio Communications. . . . . . . . . . . . . . . . . . . . . . . . 26 Configuring Wireless Printing Using IPL . . . . . . . . . . . . . . . . . . 29 Configuring Wireless Printing Using Fingerprint . . . . . . . . . . . . 31 Setting Up Serial Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Date: 29 October 2007 To whom it may concern Letter of declaration for Intermec Portable Printer model: PB50 Herewith, we declare that the device as stated below does not have “Ad Hoc on non-US frequencies” and/or “on DFS frequencies” Trademark: Intermec Model Name: PB50 Product Name: 802.11g portable printer FCC ID: EHA- WUBB If you have any questions regarding the authorization, please do not hesitate to contact us. Thank you Yours sincerely ------------------------------------------------------- Edwin Leong Senior Engineer Intermec Technologies (S) Pte. Ltd. Email: [email protected] 151 Lorong Chuan #05-02A/03 Lobby C New Tech Park Singapore 556741 tel +65 6303-2100 fax +65 6303-2199 Intermec Technologies (S) Pte Ltd

Date: 26 October 2007 FCC ID: EHA-WUBB Federal Communications Commission Authorization and Evaluation Division Re:Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Yours sincerely ------------------------------------------------------- Edwin Leong Senior Engineer Intermec Technologies (S) Pte. Ltd. 151 Lorong Chuan #05-02A/03 Lobby C New Tech Park Singapore 556741 tel +65 6303-2100 fax +65 6303-2199 Intermec Technologies (S) Pte Ltd

Date: 26 October 2007 To whom it may concern Agency Authorization letter for Intermec Portable Printer model: PB50 Herewith, we authorize Advances Data Technology (ADT) Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: Report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. This authorization shall expire six months from the original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you Yours sincerely ------------------------------------------------------- Edwin Leong Senior Engineer Intermec Technologies (S) Pte. Ltd. 151 Lorong Chuan #05-02A/03 Lobby C New Tech Park Singapore 556741 tel +65 6303-2100 fax +65 6303-2199 Intermec Technologies (S) Pte Ltd

Date: 30 October 2007 Federal Communications Commission Authorization and Evaluation Division Declaration of 802.11 function for Intermec Portable Printer model: PB50 Herewith, we declare that the above product that we are applying for FCC certification contains the 802.11 function only. We are in the process of getting the Bluetooth (BT) function certified and will not sell the BT version until we got an official approval. The purpose of including the BT instruction in the user guide is to eliminate duplication of work in the future. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you Yours sincerely ------------------------------------------------------- Edwin Leong Senior Engineer Intermec Technologies (S) Pte. Ltd. Email: [email protected] 151 Lorong Chuan #05-02A/03 Lobby C New Tech Park Singapore 556741 tel +65 6303-2100 fax +65 6303-2199 Intermec Technologies (S) Pte Ltd

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Model, Modelo, : PB50 Made in Singapore P/N: XXX-XXX-XXX S/N: XXXXXXXXXXX Intermec Technologies Corporation Everett, WA 98203 U.S.A. 1) Pre-Printed Content 2) POD Content FOR REFERENCE ONLY FCC ID:EHA-WUBB

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

FCC ID: EHA-WUBB Report No. RF960919L10 Operational Description This device is an 802.11g portable printer, which operates in the 2.4GHz frequency spectrum with throughput of up to 54Mbps which OFDM technique will be applied. If the signal to noise radio is too poor which could not support 54Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by adapter. The antenna used in this EUT is printed antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report no.: SA960919L10 1 Report Format Version 2.0.6 SAR TEST REPORT REPORT NO.: SA960919L10 MODEL NO.: PB50 RECEIVED: Sep. 19, 2007 TESTED: Oct. 16, 2007 ISSUED: Oct. 18, 2007 APPLICANT : Intermec Technologies Corporation ADDRESS : 550 Second Street SE, Cedar Rapids, IA 52401, USA ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: 47 14 th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Kueishan, Taoyuan, Taiwan, R.O.C. This test report consists of 36 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report no.: SA960919L10 2 Report Format Version 2.0.6 TABLE OF CONTENTS 1. CERTIFICATION..................................................................................................................3 2. GENERAL INFORMATION...................................................................................................4 2.1 GENERAL DESCRIPTION OF EUT................................................................................4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS..................................................4 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM........................................................6 2.4 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION........................9 3. DESCRIPTION OF SUPPORT UNITS................................................................................12 4. DESCRIPTION OF TEST MODES AND CONFIGURATIONS..............................................13 4.1. DESCRIPTION OF ANTENNA LOCATION...................................................................13 4.2. DESCRIPTION OF ASSESSMENT POSITION.............................................................14 4.3. DESCRIPTION OF TEST MODE..................................................................................14 4.4. SUMMARY OF TEST RESULTS...................................................................................15 5. TEST RESULTS.................................................................................................................16 5.1 TEST PROCEDURES..................................................................................................16 5.2 MEASURED SAR RESULTS........................................................................................18 5.3 SAR LIMITS.................................................................................................................19 5.4 RECIPES FOR TISSUE SIMULATING LIQUIDS...........................................................20 5.5 TEST EQUIPMENT FOR TISSUE PROPERTY............................................................23 6. SYSTEM VALIDATION.......................................................................................................24 6.1 TEST EQUIPMENT......................................................................................................24 6.2 TEST PROCEDURE.....................................................................................................25 6.3 VALIDATION RESULTS................................................................................................27 6.4 SYSTEM VALIDATION UNCERTAINTIES.....................................................................28 7. MEASUREMENT SAR PROCEDURE UNCERTAINTIES....................................................29 7.1. PROBE CALIBRATION UNCERTAINTY.......................................................................29 7.2. ISOTROPY UNCERTAINTY.........................................................................................30 7.3. BOUNDARY EFFECT UNCERTAINTY.........................................................................30 7.4. PROBE LINEARITY UNCERTAINTY............................................................................31 7.5. READOUT ELECTRONICS UNCERTAINTY................................................................31 7.6. RESPONSE TIME UNCERTAINTY..............................................................................31 7.7. INTEGRATION TIME UNCERTAINTY..........................................................................32 7.8. PROBE POSITIONER MECHANICAL TOLERANCE....................................................33 7.9. PROBE POSITIONING.................................................................................................33 7.10. PHANTOM UNCERTAINTY..........................................................................................34 7.11. DASY4 UNCERTAINTY BUDGET................................................................................35 8. INFORMATION ON THE TESTING LABORATORIES.........................................................36 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report no.: SA960919L10 3 Report Format Version 2.0.6 1. CERTIFICATION PRODUCT: 802.11g portable printer MODEL: PB50 BRAND: intermec APPLICANT: Intermec Technologies (S) Pte Ltd TESTED : Oct. 16, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 The above equipment (model: PB50) has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 18, 2007 Joanna Wang / Senior Specialist TECHNICAL ACCEPTANCE : , DATE: Oct. 18, 2007 Responsible for RF Stanely Hsu / Senior Engine…

Text truncated - open the document above for the full version.

Report No.: RF960919L10 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO.: RF960919L10 MODEL NO.: PB50 RECEIVED: Sep. 19, 2007 TESTED: Sep. 29 ~ Oct. 08, 2007 ISSUED: Oct. 12, 2007 APPLICANT : Intermec Technologies Corporation ADDRESS : 550 Second Street SE, Cedar Rapids, IA 52401, USA ISSUED BY : Advance Data Technology Corporation LAB ADDRESS : No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 57 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF960919L10 2 Report Format Version 2.0.6 Table of Contents 1 CERTIFICATION...........................................................................................................4 2 SUMMARY OF TEST RESULTS ..................................................................................5 2.1 MEASUREMENT UNCERTAINTY ...............................................................................5 3 GENERAL INFORMATION ...........................................................................................6 3.1 GENERAL DESCRIPTION OF EUT.............................................................................6 3.2 DESCRIPTION OF TEST MODES...............................................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ..........................................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ...............................8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...........................................10 3.4 DESCRIPTION OF SUPPORT UNITS .......................................................................10 4 TEST TYPES AND RESULTS .................................................................................... 11 4.1 CONDUCTED EMISSION MEASUREMENT .............................................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 11 4.1.2 TEST INSTRUMENTS ............................................................................................... 11 4.1.3 TEST PROCEDURES ................................................................................................12 4.1.4 DEVIATION FROM TEST STANDARD ......................................................................12 4.1.5 TEST SETUP .............................................................................................................13 4.1.6 EUT OPERATING CONDITIONS ...............................................................................13 4.1.7 TEST RESULTS .........................................................................................................14 4.2 RADIATED EMISSION MEASUREMENT ..................................................................20 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................20 4.2.2 TEST INSTRUMENTS ...............................................................................................21 4.2.3 TEST PROCEDURES ................................................................................................22 4.2.4 DEVIATION FROM TEST STANDARD ......................................................................22 4.2.5 TEST SETUP .............................................................................................................23 4.2.6 EUT OPERATING CONDITIONS ...............................................................................23 4.2.7 TEST RESULTS .........................................................................................................24 4.3 6dB BANDWIDTH MEASUREMENT .........................................................................31 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .......................................................31 4.3.2 TEST INSTRUMENTS ...............................................................................................31 4.3.3 TEST PROCEDURE ..................................................................................................31 4.3.4 DEVIATION FROM TEST STANDARD ......................................................................31 4.3.5 TEST SETUP .............................................................................................................32 4.3.6 EUT OPERATING CONDITIONS ...............................................................................32 4.3.7 TEST RESULTS .........................................................................................................33 4.4 MAXIMUM PEAK OUTPUT POWER .........................................................................37 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT..........................37 Report No.: RF960919L10 3 Report Format Version 2.0.6 4.4.2 TEST INSTRUMENTS ...............................................................................................37 4.4.3 TEST PROCEDURES ................................................................................................38 4.4.4 DEVIATION FROM TEST STANDARD ......................................................................38 4.4.5 TEST SETUP .............................................................................................................38 4.4.6 EUT OPERATING CONDITIONS ...............................................................................38 4.4.7 TEST RESULTS .........................................................................................................39 4.5 POWER SPECTRAL DENSITY MEASUREMENT ....................................................40 4.5.1…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST