EHAEM3420EM3420

700 Series Color Mobile Computer User's Manual ii700 Series Color Mobile Computer User’s Manual Intermec Technologies Corporation Corporate HeadquartersTechnical Communications Department 6001 36th Ave. W.550 Second Street SE Everett, WA 98203Cedar Rapids, IA 52401 U.S.A.U.S.A. www.intermec.com The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. E2002 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under license), InterDriver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP, Universal Access Point, and Virtual Wedge are either trademarks or registered trademarks of Intermec Technologies Corporation. Throughout this manual, trademarked names may be used. Rather than put a trademark (™or®) symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement. There are U.S. and foreign patents pending. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.opensssl.org/). This product includes cryptographic softwarewritten by Eric Young ([email protected]). iii700 Series Color Mobile Computer User’s Manual Document Change Record This page records changes to this document. The document was originally released as Revision A. RevisionDateDescription of Change B11/2002Added information about the Siemens MC45 radio module, the tethered scanner, CAB extraction, FTP Server parameters, and Data Collection control panel applet imager op- tions. C04/2003Added information about the ambient light sensor, the beeper, keypad sequences, the alphanumeric keypad, the vibrator, an accessories list, programming notifications, the MaxiCode symbology, the Utilities control panel applet, and the Wireless Network con- trol panel applet. D08/2003Upgraded Pocket PC 2002 information to Windows Mobile 2003, upgraded all illustra- tions to gray-scale, added new Imager functions, moved the Automatic Data Collection COM Interface material to the SDK User’s Manual. E01/2004Added 730 Computer information, revised CDMASetup information, and revised Wire- less Area Network Printing information. F04/2004Updated 802.11 security supplicant information. Added new network selection APIs. Incorporated information about the Intermec Settings control panel applet for PSM Builds 3.00 or newer. Added information about the PhoneUtility application. Revised Chapter 4, “Network Support.” Added tethered scanner and internal scanner configura- tion and troubleshooting information to Chapter 6, “Scanner Support.” G10/2004Added information about resetting the 700 Series Computer. Updated the Profile Wizard information in Appendix A, “Configurable Settings.” Revised information about using Sprint Watcher in Chapter 4, “Network Support.” Added information about the 700CXL Computer, including the Phone CDMA and Phone GSM applications. iv 700 Series Color Mobile Computer User’s Manual Contents v700 Series Color Mobile Computer User’s Manual Contents Before You Beginxvii............................................................ Safety Summaryxvii...................................................... Donotrepairoradjustalonexvii...................................... First aidxvii...................................................... Resuscitationxvii.................................................. Energized equipmentxvii............................................ Safety Iconsxviii.......................................................... Global Services and Supportxix.............................................. Warranty Informationxix............................................ Web Supportxix................................................... Telephone Supportxix............................................... WhoShouldReadthisManual?xx........................................... Related Documentsxx..................................................... Introduction1............................................................... Ambient Light Sensor2.......................................................... Audio System3................................................................. Speaker3............................................................... Microphone4........................................................... External Headset Jack4.................................................... Battery5...................................................................... Beeper7...................................................................... Enable the Beeper7....................................................... Disable the Scanner Mute8................................................. Select a Beeper Volume9................................................... Disable the Beeper10..................................................... Keypad11..................................................................... Backlight for Keypad11.................................................... Key Sequences12............................................…

Text truncated - open the document above for the full version.

6001 36 th Avenue West Everett, Washington 98203 United States tel 425.348.2600 fax 425.348.2633 www.intermec.com November 03, 2003 To Whom It May Concern: Intermec Technologies, Corp., the undersigned, hereby authorizes Northwest EMC, Inc., to act on our behalf, as our agent, in the following matters related to the FCC and Industry Canada approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Northwest EMC, Inc. within the scope of this authorization shall have the same affect as our own. This authorization shall expire 12 months from original date. If you have any questions, regarding this application, please feel free to contact me (phone: 425 348 2600, fax: 425 348 2633, email: [email protected] ). Sincerely, Cheryl D. White Compliance Engineer Intermec Technologies Corp.

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 July 7, 2004 Dear Application Examiner: On behalf of Intermec Corporation, Northwest EMC Inc is submitting this application for the certification of Intermec’s EM3420 transmitter, FCC ID: EHAEM3420. It is a CDMA radio module. Limited modular approval is sought for use in Intermec’s handheld computer, Model 700C. The 700C contains three co-located radio modules (CDMA, 802.11(b) and Bluetooth). The 802.11(b) radio has been previously certified for portable, co-located use in the 700C (FCC ID: HN22011B-2) The Bluetooth radio is currently seeking authorization (FCC ID: EHABTS080). The 700C can be used with several mobile accessories. It can be installed in a docking cradle in the Intermec Bluetooth-enabled Printer, Model 6820 (FCC ID: EHABTS080-1). Or it can be attached to the Intermec Model IP3, which contains a RFID radio in a handheld pistol grip. The EUT can transmit simultaneously with Bluetooth when the 700C is installed in the 6820 printer, or the EUT can transmit simultaneously with RFID when the 700C is attached to the IP3 pistol grip. The EUT was tested in the 700C for radiated emissions and SAR. These tests were then repeated with the other co-located radios transmitting simultaneously. The technical reports and exhibits demonstrate compliance with FCC rules 22H and 24E as well as the RF exposure requirements of 2.1091 and 2.1093. Your efforts in reviewing this application are greatly appreciated. Best regards, Greg Kiemel, Director of Engineering Northwest EMC, Inc.

Radio Module Location in the Intermec 700C Hand Held Computer Scott Holub 29-JUN-2004 700C Unit with: Sierra Wireless EM3420 CDMA Module Socket 8520-00080 Bluetooth Module Intel 2011B 802.11B Module 700C Unit with: Sierra Wireless EM3420 CDMA Module Socket 8520-00080 Bluetooth Module Intel 2011B 802.11B Module 700C Unit with: Sierra Wireless EM3420 CDMA Module Socket 8520-00080 Bluetooth Module Intel 2011B 802.11B Module

REVISION HISTORY Rev. File No. Description of Change Date Approved A C3487 Release 10/11/02 J S B C3599 Add manufacturer’s part number, Revise ¶4.0 1/23/03 J S REVISION LEVEL B A A SHEET NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 COMPONENT ENGR. DATE TITLE J. McROBERTS 10/09/02 Intermec Technologies Corp. BELT CLIP KIT, CLIP AND TAB STYLE COGNIZANT ENGR. DATE 550 Second Street S.E. DRAWING NO. K. BRAGINTON - - - Cedar Rapids, IA 52401 805-612-001 APPROVED DATE Telephone No. (319) 369-3100 K. VORHIES by JS 10/11/02 Facsimile No. (319) 369-3453 Sheet 1 of 3 COMPONENT SPECIFICATION APPROVED SUPPLIERS Manufacturer Address/Telephone 805-612 Manufacturer’s Designation The Clip Company 9974 Scripps Ranch Boulevard, #331 -001 ITMC964POLY San Diego, CA 92131-1825 (858) 549-3121 1.0 Scope:This specification describes the requirements for a belt clip kit consisting of one each belt clip assembly, one each mating tab, and a pan head screw used to mount the tab to the hand held terminal. 2.0 Quality Assurance:Intermec Receiving Inspection reserves the right to use AQL sampling techniques when inspecting a lot. 3.0 Packaging:Assembly is supplied in kit form in containers capable of protecting the device from damage and/or contamination in common carrier shipping and handling. 4.0 Markings:Individual kit shipping bags will be labeled to include the Intermec part number (in both human readable and in bar coded forms). Major shipping cartons will be marked to include the Intermec part number, and the quantity within. 805-612-001 Intermec Part Number 805-612-001 Sheet 2 5.0 Materials: 5.1Belt Clip Assembly (1 each): Five-piece assembly consisting of a molded blended polycarbonate and ABS resin U-shaped clip, stainless steel coil-spring loaded molded blended polycarbonate and ABS resin release button, and a molded blended polycarbonate and ABS resin belt clip secured by a tempered steel spring. Molded plastic parts are a black color with textured exterior surface finish, and spring steel has a black finish 5.2Tab (1 each): One-piece black molded blended polycarbonate and ABS resin stand-off button shaped tab with recessed mounting hole on the center line axis 5.3Mounting Hardware (1 each): #4-40 by 3/8 inch stainless steel with black oxide finish (#1 point drive) Philips pan head screw with thread retaining nylon patch 5.4Instructions (1 ea.): Installation instructions, Intermec P/N 962-000-023 5.5Bag (1 each): 2 x 3 inch clear polypropylene bag with zip-lock closure 5.6Label (1 each): Coated white adhesive paper with thermal print supplied attached to the above bag 6.0 Outline Drawing (inch):Belt Clip 1.1 Ref. Thickness: .75 Ref. 2.3 Ref. Intermec Part Number 805-612-001 Sheet 3 7.0 Installation Instructions (Ref.):

REVISION HISTORY Rev. File No. Description of Change Date Approved A C3600 Release 1/23/03 J S REVISION LEVEL A A A SHEET NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 COMPONENT ENGR. DATE TITLE J. McROBERTS 1/16/03 Intermec Technologies Corp. NYLON HOLSTERS, MODEL 700 SERIES COGNIZANT ENGR. DATE 550 Second Street S.E. DRAWING NO. B. ECKLEY - - - Cedar Rapids, IA 52401 815-047-0XX APPROVED DATE Telephone No. (319) 369-3100 K. VORHIES by JS 1/23/03 Facsimile No. (319) 369-3453 Sheet 1 of 3 COMPONENT SPECIFICATION APPROVED SUPPLIERS Manufacturer Address/Telephone 815-046 Manufacturer’s Part No. Koszegi Industries, Inc. 1801 Green Road, Suite E -001 INEPT-0558-K . Pompano Beach, FL 33064 -002 INEPT-0559-K Phone (800) 872-3935 Fax (954) 419-9735 1.0 Scope:This specification describes the requirements for a custom nylon holster style carrying case, suitable for Model 700 Series (mono or color display types) hand held data terminals as follows: Intermec P/N Mfr’s ModelDescription -001 INEPT-0558-K Holster for use without scan handle -002 INEPT-0559-K Holster for use with scan handle units 2.0 Quality Assurance:Intermec Receiving Inspection reserves the right to use AQL sampling techniques when inspecting a lot. 3.0 Markings:Each smallest shipping container will be labeled or otherwise marked to include the manufacturer’s name and part number. Major shipping containers will be marked with the Intermec part number. 4.0 Description:Black nylon “holster” style carrying case with belt loop (or universal “T” belt mount) and accessory 1.5 inch black nylon waist belt. 815-047-0XX Norand Part Number 815-047-0XX Sheet 2 5.0 Holster Carrying Case:-001 Part, for Terminal w/o Scan Handle Front View (w/Terminal) Rear View Bottom View (w/Terminal) Norand Part Number 815-047-0XX Sheet 3 6.0 Holster Carrying Case:-002 Part, for Terminal w/Scan Handle Back View (w/Terminal) Front View (w/Terminal) Bottom View (w/Terminal)

072775B SIZECAGE CODEDRAWING NUMBER SCALE 1/1SHEET 14 33825 6001 36TH AVENUE WEST EVERETT, WA 98203-9280 REVISIONS DESCRIPTIONECN INITIAL DRAWING CREATION REV 01 RELEASED AT REV AA ADDED 760 CDMA CONFIGS & SHEET 14 TO DRAWINGD DATEAPPROVED SCALE 1/1: ARTMASTER REV X Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXXN000 OR 760XXXC2XXXXN000 Made in Singapore N309 I.T.E. 729T 700C Hand Held Computer Label with FCC ID: EHAEM3420 Installed FCC ID: EHAEM3420 12V 1,5A Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXXN000 OR 760XXXC2XXXXN000 Made in Singapore N309 I.T.E. 729T FCC ID: EHAEM3420 12V 1,5A SCALE 2/1: ARTMASTER REV X 072775B SIZECAGE CODEDRAWING NUMBER SCALE 1/1SHEET 15 33825 6001 36TH AVENUE WEST EVERETT, WA 98203-9280 REVISIONS DESCRIPTIONECN REV RELEASED AT REV AA ADDED 760 CDMA CONFIGS & SHEET 15 TO DRAWINGD DATEAPPROVED AJH JMB ARTMASTER REV X ARTMASTER REV X 700C Hand Held Computer Label with FCC ID: EHABTS080 FCC ID: EHAEM3420 Installed CONTAINS TX FCC ID: EHAEM3420 FCC ID: EHABTS080 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXX4000 OR 760XXXC2XXXX4000 12V 1,5A Made in Singapore N309 I.T.E. 729T CONTAINS TX FCC ID: EHAEM3420 FCC ID: EHABTS080 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXX4000 OR 760XXXC2XXXX4000 12V 1,5A Made in Singapore N309 I.T.E. 729T 103812 02.13.03 SCALE 1/1: SCALE 2/1: REV F CHANGED FCC IC NUMBERS F 10401009-08-03 REV G CHANGED FCC IC NUMBERS G XXXXXX06-23-04 072775B SIZECAGE CODEDRAWING NUMBER SCALE 1/1SHEET 16 33825 CAD DB. REF - 072775_F_016 6001 36TH AVENUE WEST EVERETT, WA 98203-9280 REVISIONS DESCRIPTIONECN INITIAL DRAWING CREATION REV 01 RELEASED AT REV AA ADDED 760 CDMA CONFIGS & SHEET 16 TO DRAWINGD DATEAPPROVED CFB JMB ARTMASTER REV X ARTMASTER REV X 700C Hand Held Computer Label with FCC ID: EHAEM3420 FCC ID: HN22011B-2 Installed OR CONTAINS TX FCC ID: EHAEM3420 FCC ID: HN22011B-2 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXXN704 OR 760XXXC2XXXXN704 12V 1,5A Made in Singapore I.T.E. 729T N309 CONTAINS TX FCC ID: EHAEM3420 FCC ID: HN22011B-2 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXXN704 OR 760XXXC2XXXXN704 12V 1,5A Made in Singapore I.T.E. 729T N309 103812 02.13.03 SCALE 1/1: SCALE 2/1: REV F CHANGED FCC IC NUMBERS F 10370909-08-03 072775B SIZECAGE CODEDRAWING NUMBER SCALE 1/1SHEET 17 33825 6001 36TH AVENUE WEST EVERETT, WA 98203-9280 REVISIONS DESCRIPTIONECN REV RELEASED AT REV AA ADDED 760 CDMA CONFIGS & SHEET 17 TO DRAWINGD DATEAPPROVED CFB JMB ARTMASTER REV X 700C Hand Held Computer Label with FCC ID: EHABTS080 FCC ID: HN22011B-2 FCC ID: EHAEM3420 Installed Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 12V 1,5A Made in Singapore I.T.E. 729T MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXX4704 OR 760XXXC2XXXX4704 CONTAINS TX FCC ID: EHAEM3420 FCC ID: HN22011B-2 FCC ID: EHABTS080 N309 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 12V 1,5A Made in Singapore I.T.E. 729T MODEL: 700C MFD: XXXXXXXXX 2002 SN: xxxxxxxxxxx XXXXXXXX4323232XXX CN: 760XXXC1XXXX4704 OR 760XXXC2XXXX4704 CONTAINS TX FCC ID: EHAEM3420 FCC ID: HN22011B-2 FCC ID: EHABTS080 N309 103812 02.13.03 SCALE 1/1: ARTMASTER REV X SCALE 2/1: REV F CHANGED FCC IC NUMBERS F 10401009-08-03 AJH REV G CHANGED FCC IC NUMBERS G XXXXX06-23-04

REVISION HISTORY Rev. File No. Description of Change Date Approved A C3233 Release 4/22/02 D V B C3332 ¶1.0 Blue was yellow; ¶6.2 Was TBS; ¶6.3 Was TBS; ¶6.4 Was TBS; ¶7.2 Was 6/10/02 J S fractional wave; ¶7.3 -30º to +60ºC was TBS; ¶9.0 Blue was yellow; ¶10.0 Was TBS C C3463 Add -004 part; Revise ¶1.0, ¶6.2, ¶6.3 & ¶7.2; ¶8.4 Was not specified; ¶9.0 Add 10/31/02 J S length & -004 status; ¶10.0 Redrawn, L was 2.23, add 0.34, add 0.19 & add 0.09 (typ) D C3534 ¶6.2 3dBi & 4dBi were TBS; ¶6.3 3.0:1 was TBS; ¶9.0 1.10 was .90, & add white 12/16/02 J S E C3685 Add -101 thru -104 parts; Revise ¶4.0; Insert ¶5.0, ¶6.2, ¶6.3 & ¶7.2 Add -1XX parts; 3/24/03 J S ¶8.1 Was not specified; Insert ¶8.2 & ¶8.3; ¶8.4 Add TPE blk color; ¶9.0 Add -1XX parts; ¶10.0 Add plug detail, Add 0.46 ±0.02, Add -0XX style ..., Add ¼ - 36 UNS ... F C3796 Add -204 part; Revise ¶1.0, ¶6.2 thru ¶6.4, ¶7.2 thru ¶8.2 & ¶9.0; Add ¶11.0 6/11/03 J S REVISION LEVEL F F F E F SHEET NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 COMPONENT ENGR. DATE TITLE J. McROBERTS 3/28/00 Intermec Technologies Corp. DUAL BAND ANTENNA, SMA MOUNT COGNIZANT ENGR. DATE 550 Second Street S.E. DRAWING NO. S. HOFSTETTER - - - Cedar Rapids, IA 52401 805-606-XXX APPROVED DATE Telephone No. (319) 369-3100 K. VORHIES by DV 4/22/02 Facsimile No. (319) 369-3453 Sheet 1 Of 5 COMPONENT SPECIFICATION APPROVED SUPPLIERS Manufacturer Address/Telephone 805-606 Manufacturer’s Part No. Mobile Mark, Incorporated 3900-B River Road -001 Replaced by -101 part Schiller Park, Il 60176 -002 Replaced by -102 part (847) 671-6690 -003 Replaced by -103 part -004 Replaced by -104 part -101 PSTG0-2400RSCI -102 PSTG0-900/1900SCI -103 PSTG0-925/1800SCI -104 Replaced by -204 part -204 PSTG0-1900SCI 1.0 Scope:This specification describes the requirements for a family of dual band, stubby portable wide area network antennas with SMA plug mounting as follows: Part No. Antenna Application/TypeNominal FrequencyColor Dot -001 802.11b 2400 MHz green -002 North American CDMA/GSM/GPRS 900/1900 MHz red -003 European GSM/GPRS 925/1800 MHz blue -004 North American CDMA/GSM/GPRS 1900 MHz white -101 802.11b 2400 MHz green -102 North American CDMA/GSM/GPRS 900/1900 MHz red -103 European GSM/GPRS 925/1800 MHz blue -104 North American CDMA/GSM/GPRS 1900 MHz white -204 North American CDMA/GSM/GPRS 1900 MHz white 805-606-XXX Intermec Part Number 805-606-XXX Sheet 2 2.0 Quality Assurance:Intermec Receiving Inspection reserves the right to use AQL sampling techniques when inspecting a lot. 3.0 Packaging: All antennas will be packaged in containers capable of protecting them from damage in common carrier shipping and handling. 4.0 Markings:Individual antennas will be color coded with a color dot per Paragraph 1.0 on the antenna end opposite the connector. Each container will be labeled or otherwise marked with the manufacturer’s name or trademark, the manufacturer’s part number, and date code. Major shipping cartons will be marked with the Intermec part number. This information shall also be labelled in Bar Code 39 format. 5.0 Design Change Approval:Any change in process, design, or materials affecting form, fit or function of the part described herein subsequent to the delivery of engineering evaluation samples, must be approved by the Intermec Technologies Corporation Engineering Department. 6.0 Antenna Specifications: 6.1Frequency: See parts tabulation below 6.2Antenna Gain: -001 P/N – 1.3 dBi -002 P/N-3dBi -003 P/N-3dBi -004 P/N-4dBi -101 P/N – 1.3 dBi -102 P/N-3dBi -103 P/N-3dBi -104 P/N-4dBi -204 P/N-4dBi 6.3VSWR: -001 P/N – 2.0:1 upper band -002 P/N – 3.0:1 lower band/3.0:1 upper band -003 P/N – 3.8:1 lower band/2.5:1 upper band -004 P/N – 3.0:1 upper band -101 P/N – 2.0:1 upper band -102 P/N – 3.0:1 lower band/3.0:1 upper band -103 P/N – 3.8:1 lower band/2.5:1 upper band -104 P/N – 3.0:1 upper band -204 P/N – 3.0:1 upper band 6.4Power: -0XX P/Ns – 1 Watt -1XX P/Ns – 1 Watt -204 P/N – 3 Watts 6.5Radiation: Omnidirectional 6.6Polarization: Linear 6.7Nominal Impedance: 50 Ohms Intermec Part Number 805-606-XXX Sheet 3 7.0 Mechanical Ratings: 7.1Mounting Means: SMA plug mount (mounts to SMA receptacle, per tabulation below) 7.2Element Length: -001 P/N – 1/2λ -002 P/N – 1/4λ -003 P/N – 1/4λ -004 P/N – 1/4λ -101 P/N – 1/2λ -102 P/N – 1/4λ -103 P/N – 1/4λ -104 P/N – 1/4λ -204 P/N – 1/4λ 7.3Ambient Operating Temperature: -40ºC to +80ºC 8.0 Materials: 8.1Antenna Material: -001 P/N – #18 AWG tinned copper -002 P/N – #23 AWG enameled copper -003 P/N – #18 AWG tinned copper -004 P/N – #18 AWG tinned copper -101 P/N – #18 AWG tinned copper -102 P/N – #23 AWG enameled copper -103 P/N – #18 AWG tinned copper -104 P/N – #18 AWG tinned copper -204 P/N – 1/16 in. dia. stainless steel 8.2Ferrule/Plug: -0XX P/N’s – Machined brass with integrated SMA plug -1XX P/N’s – Machined brass with knurled exterior and integrated SMA plug -204 P/N – Two-piece machined brass with knurled exterior and integrated special SMA plug 8.3Adhesive: Cyanoacrylate, Loctite #404, applied between the radome and the ferrule 8.4Radome Material: 50/50 blend of K-Resin and Santoprene 7311 thermoplastic elastomer, black color 9.0 Parts Tabulation: Part Lower Band Upper Band Length Color Number Freq. (MHz) Freq. (MHz) Interconnection L (inch) Dot -001 none 2400 to 2483.5 rev. sex SMA plug 2.23 green -002 824 to 894 1850 to 1990 std. sex SMA plug 2.23 red -003 890 to 960 1700 to 1880 std. sex SMA plug 2.23 blue -004 none 1850 to 1990 std. sex SMA plug 1.10 white -101 none 2400 to 2483.5 rev. sex SMA plug 2.23 green -102 824 to 894 1850 to 1990 std. sex SMA plug 2.23 red -103 890 to 960 1700 to 1880 std. sex SMA plug 2.23 blue -104 none 1850 to 1990 std. sex SMA plug 1.10 white -204 none 1850 to 1990 std. sex SMA plug 1.20 white Intermec Part Number 805-606-XXX Sheet 4 10.0 Outline Drawing (inches):-0XX & -1XX part numbers L Color Dot (Recessed) 0.46 ±0.0 2 ¼ - 36 UNS - 2B threads to be clear of burrs & particulate mate…

Text truncated - open the document above for the full version.

in accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C For CDMA Module MODEL: EM3420 FCC ID: EHAEM3420 July 12, 2004 REPORT NO: 04U2834-1 Prepared for 550 SECOND ST. SE CEDAR RAPIDS IA 52401-2023, USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 REPORT NO: 04U2834-1 DATE: July 12, 2004 FCC ID: EHAEM3420 COMPLIANCE CERTIFICATION SERVICES Page: 2 of 47 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) DATES OF TEST: July 7 - 12, 2004 APPLICANT: Intermec Technologies Corporation 550 SECOND ST. SE CEDAR RAPIDS, IA 52401-2023, USA MODEL: EM3420 FCC ID: EHAEM3420 DEVICE CATEGORY: PORTABLE DEVICES EXPOSURE CATEGORY: GENERAL POPULATION/UNCONTROLLED EXPOSURE Application Type: Certification Tx Frequency: 1850 to 1910 MHz for CDMA PCS band 824.0 to 849.0 MHz for CDMA Cellular Band 2412 to 2462 MHz for 802.11b; 2402 to 2480 MHz for Bluetooth Max. SAR (1g): • CDMA PCS Band Right head tilted position: 1.14 mW/g; 1.17 mW/g (Co-location) Body worn (With belt clip): 0.542 mW/g; 0.539 mW/g (Co-location) • CDMA Cellular Band Right head tilted position: 0.355 mW/g; 0.375 mW/g (Co-location) Body worn (With holster): 0.368 mW/g; 0.38 mW/g (Co-location) FCC Rule Part(s): 24 E for CDMA PCS Band (1850 to 1910 MHz); 22 H for CDMA Cellular Band (824.0 to 849.0 MHz) Antenna Type: External Stubby, • P/N: 805-606-204 for CDMA PCS Band; • P/N: 805-606-102 for CDMA PCS & Cellular Band This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C (released on 6/29/2001 see Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Hsin-Fu Shih (Sunny Shih) Senior Engineer REPORT NO: 04U2834-1 DATE: July 12, 2004 FCC ID: EHAEM3420 COMPLIANCE CERTIFICATION SERVICES Page: 3 of 47 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS 1. EQUIPMENT UNDER TEST (EUT) DESCRIPTION..................................................................4 2. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC...................................4 3. DOSIMETRIC ASSESSMENT SYSTEM...................................................................................4 3.1. MEASUREMENT SYSTEM DIAGRAM..................................................................................................................5 3.2. SYSTEM COMPONENTS.....................................................................................................................................6 4. EVALUATION PROCEDURES...............................................................................................8 5. MEASUREMENT UNCERTAINTY.........................................................................................12 6. EXPOSURE LIMIT..............................................................................................................13 7. MEASUREMENT RESULTS................................................................................................14 7.1. SIMULATING LIQUIDS PARAMETER CHECK....................................................................................................14 7.2. SYSTEM PERFORMANCE CHECK....................................................................................................................19 7.3. SAR MEASUREMENTS RESULTS....................................................................................................................21 8. EUT PHOTOS..................................................................................................................42 9. EQUIPMENT LIST & CALIBRATION STATUS.......................................................................45 10. REFERENCES...................................................................................................................46 11. ATTACHMENTS.................................................................................................................47 REPORT NO: 04U2834-1 DATE: July 12, 2004 FCC ID: EHAEM3420 COMPLIANCE CERTIFICATION SERVICES Page: 4 of 47 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. EQUIPMENT UNDER TEST (EUT) DESCRIPTION Type of EUT: CDMA module installed into PDA (Intermec, model 700C) Radio module FCC ID Wireless LAN Card (802.11b) HN22011B-2 Bluetooth Module EHABTS080 Co-located transmitter operating configurations with optional Bluetooth radio card has been evaluated as described in this report. Battery: 7.2V Lithium-Ion (P/N: 318-013-001) 2. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC The US Federal Communications Commission has released the report and order “Guidelines for Evaluating the Environmental Effects of RF Radiation", ET Docket No. 93-62 in August 1996 [1]. The order requires routine SAR evaluation prior to equipment authorization of portable transmitter devices, including portable telephones. For consumer products, …

Text truncated - open the document above for the full version.

Date/Time: 07/07/04 08:38:22 Test Laboratory: Compliance Certification Services File Name: D1900V2 SN5d043_070704.da4 DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Program Name: System Performance Check at 1900 MHz Ambient Temp.: 24.0 deg. C; Liquid Temp.: 23.0 deg. C Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.4 mho/m; ε r = 40; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration…

Text truncated - open the document above for the full version.