ELY547-36-0029-RTransceiver Module

WARNING! This OEM module is to be installed only in Dimplex North America Limited end products by Dimplex North America Limited personnel, and shall not be offered to 3rd party OEM integrators or the general public. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The RF Module is labeled with its own FCC ID Number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: ELY547-36-0029-R Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. The RF Module is labeled with its own IC Certification Number. If the certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module IC: 1492A-360029R Installation 1. Locate and insert the plug connectors on the remote control into plug connectors on the fireplace. 2. Lock the PCBA by the 4 stand-offs on the fireplace.

Label Format Label location

BUREAU VERITAS TEST REPORT No: (5213)183-2024 To: JECKSON ELECTRIC CO., LTD. TEST REPORT To: FolderNo.: hen chan JEC-13JU262ETHP-B-A Attn:Henry Chan Address: 18/F,China Aerospace Centre,143 Hoi Bun Road,Kwun Tong,Kowloon, Hon Kon Fax: 23430391 E-mail: Location: Attn: Address: Fax: E-mail: Factory name:HUIZHOU FACTORY JECKSONELECTRIC CO., LTD. China AerospaceIndustrial Park,ZhongkaiHigh-Technology Industrial Zone,Huizhou,Guangdong, P.R.China.516006 Product: 2.4GHz Midline ModelNo.:36-0029-R The results given in this report are related to the tested specimen of the described electrical apparatus. CONCLUSION:The submitted sample was found to COMPLY with requirement of FCC Part 15 Subpart C. Authorized Signature: Reviewed b: Keith Yeun Date:Au ust 16,2013 Sample No: HK130626/015 Test date: July11,2013 To August 5,2013 Test Requested: FCC Part 15 - 2011 Test Method: ANSI C63.4 - 2009 FCC ID:ELY547-36-0029-R BUREAU VERITAS HONG KONG LIMITED Kowloon Bay Office 1/FPacific Trade Centre, 2 Kai Hing Road,Kowloon Bay, Kowloon,HONG KONG Tel:+8522331 0888 Fax:+852 23310889 www.cps.bureauveritas.com TlusreportIS Intendedfor your exclusiveuseAny copying orreplicationof thisreport to or forany other person orennty.or use of our name ortrademark.ISpermittedonlywithour pnor written pemussion.Our report islimtedto thetestsamples Identified heremTheresults setforth10thisreportarenot necessarily mdicanve orrepresentative of the statistical quality orcharacteristics of the101from whicha testsamplewastakenorany similaror idenncalproductunless specificallyandexpresslynoted.Ourreport includes allof the testsrequestedby),OUand theresultsthereof Youshallhavethmydaysfrom receiptofthisreport torequest addiucnaltestingof the samplesor to notifyus of any errorsor omissionsrelatingto our report,provided,however. such notice shall be inwriting andshaJlspecificallyaddressthe issue you wish to raise.A failure10raise suchissuewithintheprescribed lime shallconstitute your unqualified acceptance ofthe completeness of thisreport.thetestsconductedand thecorrectness of the report contents Page 1 of 24 TEST REPORT No: (5213)183-2024 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 2 of 24 Test Result Summary EMISSION TEST Test requirement: FCC Part 15 - 2012 Test Condition Test Method Test Result Pass Failed Conducted Emission Test, 0.15MHz to 30MHz ANSI C63.4 Radiated Emission Test, 9kHz to 24GHz ANSI C63.4 Frequency range of Fundamental Emission ANSI C63.4 26dB Bandwidth of Fundamental Emission ANSI C63.4 Duty Cycle Correction During 100mesc ANSI C63.4 TEST REPORT No: (5213)183-2024 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 3 of 24 Location of the test laboratory Radiated and Conducted emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 2009. An Open Area Test Site and Full Anechoic Chamber (FCC Listed Site, Registration No. 642151) are set up for investigation and located at : BUREAU VERITAS HONG KONG LIMITED, EMC CENTRE No. 2106-2107, 21/F., Westin Centre, 26 Hung To Road, Kwun Tong, Kowloon, Hong Kong List of measuring equipment Radiated Emission EQUIPMENT MANUFACTURER MODEL NO. SERIAL NO. LAST CALIBRATION CALIBRATION DUE EMI TEST RECEIVER R&S ESCI 100379 29-JAN-2013 28-JAN-2014 SPECTRUM ANALYZER R&S R3127 111000909 30-JAN-2013 29-JAN-2014 BILOG ANTENNA SCHAFFNER CBL6112D 25229 12-SEP-2012 11-SEP-2013 HORN ANTENNA SCHWARZBECK BBHA9120D 9120D-692 13-SEP-2013 12-SEP-2013 PYRAMIDAL STANDARD GAIN HORN ANTENNA ETS-LINDGREN 3160-09 00130130 24-JAN-2012 2…

Text truncated - open the document above for the full version.

Measurement of Radiated Emission Test Set Up Measurement of Conducted Emission Test Set Up